Conecting MY MD player useing the Digital out jack on A2 ZS H

Ok i have me a MD Sharp DR7 which has an optical In. on the back of my A2 i have a digital out Jack. so i conect my MD and it says no signal. iam useing a 3.5mm jack optical cable from A2 ZS to MD which is what the instructions say on my MD.
so why dont i have any digital signal from my A2 ZS, i have checked all the digital outputs in the software and control panel but still its not working.
Is my sound card at fault?
I would really like to record useing some of the sound functions my A2 ZS offers but why cant i conect it by digital output!!!!!!!!
thanks in advance for any awnsers to the problem that bugs my life right now!

MiniDisc units do not care if its digital input signal comes from optical SPDIF or coax SPDIF. It's all SPDIF. All you need is the correct cable.
It is possible you are hitting an SCMS restriction, in which case it doesn't matter how the digital signal is fed into the MD unit. I don't know if Creative's drivers respect SCMS or not - I haven't had the card long enough to find out yet.
But you definitely do not need to use optical connectors to transfer digitally to an MD unit.

Similar Messages

  • Does anyone know why there would be slight latency using a digital out (Toslink w/adaptor) to my amp, where I don't have latency with an analogue cable? Is it the amp that is causing the latency?

    Recenty used a Macbook Pro with analogue out to my amp and there was no latency at all. Bought a new iMac and got a Toslink cable with adaptor and connected to same amp. There is slight latency using the digital out! Can anyone explain why? I don't really want to go back to using the digital cable because I have the surround sound setup that works well with the optical cable.

    error: I don't really want to go back to using the ANALOGUE cable....

  • How to use the Digital Audio in & out RCA jacks a6010n

    On the lower right of the back of my Pavillion a6010n desktop, above the mouse and keboard connections and below the monitor connection are two RCA jacks labeled Digital Audio in and out.  The top one has an orange insulator and is labeled "out", and the lower one has a black insulator and is labeled "in".  I have been unable to find any information about these or how to use them.  Can anyone please tell me or direct me to information about this?  I have Vista Home Premium 32 bit and have added a Sound Blaster Audigy sound card which is cheap but has a better S/N ratio.  In Control Panel --> Sound the digital output for the sound card is listed but there is nothing about the Digital Audio jacks I would like to be able to use.  Thank you all.

    Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
    Just my two opinionated cents...

  • I'm trying to use the digital in/out on my G5 with LogicPro

    I've been trying to setup my G5 dual 2.0 (10.4.6) and LogicPro 7.2.1 using the digital in and out of the G5, the problem I'm having is that I cannot make the clock source stay as external, it keeps jumping back to internal even-though it is connected properly to my Digidesign 192 interface's lightpipe.
    When I use the Motu 828 it locks to the 192's clock source just fine.
    Is there something I'm missing, or is it just not possible?
    Thanks in advance
    Marcello Azevedo

    Thanks for responding,
    I'm using Protools on a different computer, all I need is to get the internal Digital In/Out of my G5 dual 2.0 to accept an external clock source, the clock source comes from a 192 I/O interface being used on a G5 dual 2.7 with Protools.
    Thanks
    Marcello Azevedo

  • Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

    Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI  in without any additional  software or graphics adaptor.  I have a 520-1070
    HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not  recognized.

    Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
    If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can someone tell how to use the digital av adapter to hook up my iPod to the tv

    Can someone tell me how to use the digital av adapter with my iPod to the tv

    Per this YouTube discussion it appears it does not nsupport TV out, only mirroring
    https://productforums.google.com/forum/#!searchin/youtube/tv$20out/youtube/wbm8v 35tbyg/ULbLJ3sAnVUJ

  • How use any digital out for rs232

    hi !
    how use any digital out for rs232 for LPC2368,2378 ? is it realy ?
    thanks for answer

    Sergiv,
                 I don't know which LabVIEW Embedded product you are using (LabVIEW for ARM or the Microprocessor SDK) but there are shipping examples that walk you through basic DIO and Serial communication (for the LM3S8962) that you should be able to port over to your hardware. The two shipping examples are called DIO.lvproj and Serial Comm.lvproj. You can find these shipping examples in the Example Finder (Help>>Find Examples..) under the section called Toolkits and Modules and then under the ARM section.
    Grant H.
    National Instruments
    LabVIEW Product Marketing Manager

  • Installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature.  It's been completely removed.  Need it back. Please help..

    I installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature.  It's been completely removed.  Need it back. Please help..  Can't sign or add text to any pdf document. Even when security properties allow it. 

    I would remove Reader and repair or reinstall Acrobat.
    Having different major versions can cause some users issues. Reader is not necessary if one has Acrobat installed. Even though Adobe has improved the capability of having both Reader and Acrobat with the same major version level there are still user configurations that have problems with this setup.

  • Having trouble auto-focusing using the digital display.

    My Rebel T3 seems to have problem auto-focusing indoors when using the digital display .  Seems to work fine using the viewfinder.

    Live View focusing is always going to be very slow.  It is not just your camera.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Why does Adobe 9 standard crash when using the digital signature

    When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.

    I had the same problems and was VERY frustrated.
    I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
    Good Luck!
    rufus78

  • How to use the read out feature to read Korean or Arabic

    I am now using Acrobat 11.And I want to use the read out loud feature to read the Korean charactors or Arabic.
    But only the English words can be read in my computer.
    Could some please tell me how to read other country languages besides English?
    Thanks.
    Have a good day.

    Hello Gerd.
    I have posted this question at Francois site. No answer yet.
    Anyone familiar with the LAF project might be aware of what i'm talking about.
    I don't believe questions about this project are not to be answered on this forum. Indeed i've found and posted some questions myself about it and get answered before.
    Regards, Luis ...!

  • Satellite 5200 701: I can't use the TV Out anymore.

    Hello,
    This is my first message on this forum. I have a Satellite 5200 701 for 3 years now. I can't watch movies on my TV anymore. I could use this function in the past.
    Last november, I formatted my laptop with Toshiba's CDs. As I had no TV, I had not tried using the TV Out function. But now that I have one (different) TV Set, I have tried to use it without success.
    When I press Fn + F5, nothing happens. When I go to the screen selection, I can select the 2nd display but in "advanced", I can't find the same features as I had in the past (before the formatting). I don't have in "advanced" the Nview utility...
    Is it a problem of driver? From Nvidia, or Toshiba, or Microsoft? Hardware problem...?
    I don't know how to solve this problem.
    regards,
    jimbow

    Its cool that you have solved the issue.
    Thanks for the information. It could be very useful for the another Toshiba forum users.
    regards

  • I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

    I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

    I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
    Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
    So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

  • Actually i use the mini-jack to cinch connection to stream music to my stereo.  is there a possibility to use the digital output?  my sterea amply does not have a digital imput.

    actually i use the mini-jack to cinch connection to stream music to my stereo.  is there a possibility to use the digital output?  my stereo amp does not have a digital imput.  are there good converters available?

    By default, your AirPort Express is using an internal DAC to convert the digital audio stream to analog when you connect an analog audio cable to it audio output port. You can; however, connect an external DAC to the same port using a optical digital cable and let the external DAC do the conversion for your stereo.

  • How can i use the TV out on mt 5600

    I have a FX5600-vtd256 and I want to be able to use the TV out to go into my vcr but at the monent there is no video signal coming out of the card
    do i need to set , install, or adjust something?

    AirPlay hasn't anything to do with sending audio over the optical connection to a receiver. AirPlay is the ability of an iPhone, iPad or iPod to send audio over wifi to an AirPlay enabled device such as the Apple TV. The Apple Tv is not able to send audio by Airplay.
    There are a large number of users that have reported it is not possible to get audio over optical without having the TV turned on, on the other hand a small number have reported it is. It's therefore likely (although I haven't tested it) that whether it's possible or not depends on your TV.

Maybe you are looking for

  • Printer no longer recognized by Extreme Base Station

    I have had my Epson Stylus Photo 900 connected to the base station and working for some time. I tried printing to it today and nothing happened. I ran the Printer Setup Utility and I get only two options: one to set up browser and one to set up IP pr

  • How can I restore iPad without access to Apple ID or last PC used?

    My organization has about 25 iPads. I just had one returned to me as "Disabled", and I am unable to recover it using the usual procedure because I don't have access to the last PC it was connected to.  This iPad was used by a former employee.  I have

  • Process order - settlement rule

    hi experts, our client has a R&D trial batches scenario . for that they will create a process order and the cost should go to cost center of r&d and not to matrial. at present i get MAT in settlement rule , so the cost is settled against material. i

  • Client export

    hello experts, when client exported from scc8 the request created with 1.89 gb in data folder but now client size is increase so i am exports client with filesplit option but it create more no of request with 2 gb in size what is the difference betwe

  • Recording or saving customer solutions

    Hi all, I am supporting many customers and I need to save or record the customer solutions provided by the partners in sap solution manager 7.1. Anyone please help me in doing this....