Conection between Infotype 2001 and 2006

Hello experts,
i´ve got the following problem: I had to book an absence in infotype 2006.
I want do this with via BAPI BAPI_PTMGRATTABS_MNGCREATION.
So far it works. My problem is that i don´t know the value for ABS_ATT_TYPE (it´s a value of infotype PA2001-SUBTY) but i only got the value of of infotype 2006 (PA2006-SUBTY). These 2 values are NOT the same and i don´t know how to match them. Is there any FM or BAPI which tells me the correct PA2001 value for my PA2006 vlaue?

Hi Benjamin,
2001 -> Absences
2006 -> Absence Quota
From the look of it , BAPI_PTMGRATTABS_MNGCREATION seems to be used to create Absences and not Absence Quotas.
Have you tried using HR_INFOTYPE_OPERATION to create Absense Quotas ?
Also, have a look at table V_556R_B. It will give you the relation between 2006 and 2001.
Regards,
Jovito
Edited by: dsouzajovito on Jan 24, 2011 2:27 PM

Similar Messages

How to retrieve time data from infotypes 2001 and 2002 when we use PNPCE

Hello Everyone,
   I am new in using PNPCE ldb.In the requirement i have to retrieve time data from infotypes 2001 and 2002 between the begda and endda.I tried using the macro RP-READ-ALL-TIME-ITY to retrieve data.But its not supporting.Can some body help me in doing this.
THanks in Advance..
Regards,
Chinni.

Hi
   Try the following code:
REPORT ZHRTM41.
nodes peras.
Tables: PERNR.
Infotypes: 2001.
start-of-selection.
get peras.
rp_read_all_time_ity pn-begda pn-endda.
end-of-selection.
loop at p2001.
write:/ p2001-abwtg,p2001-stdaz.
endloop.
    It worked for me when using PNPCE. let me know if you have any problem
Thanks,
V.Nagaraju

Conection Between R/3 and BW

Hello Experts
I need to creat a conection between R/3 and Bw. I have some documents that show me how i can do this, but the documents are for ECC 6.0 version of SAP and my version is 4.6C. Please, help me this issue If someone have a document for 4.6C version, will be a great help.

Hi,
Once all ur enviroinment is done, i mean ur Add ons, Proper Plug -ins etc...Goto SALE--> Create a Logical system in both the side of system and Assaign the same. Then goto SM59 Create a RFC destination in both the sides, Define the host r server name and in log on tab in BI system, Give the R3 user id and Password, In R3 side logon tab, give the BI User id and Password.
U can connect RFC through ur back ground User id as well.
Thanks,
Srinivas.

INFOTYPE 2001 AND 2002

When i book absence in infotype 2001 or book an attendance in infotype 2002, if i put 6.51, the system automatically changes it to 6.52 hrs. I just want the system to take 6.51. How is this possible. Can this be done through configuration. Please help
Thanks

hi,
This Absence Hours is changing automatically to accomodate the absence start Time and End Time.
Say in your eg,
I assume Personal workshedule start Date - End date iis 8.00 - 17.00.
You are trying to input6.51,system will automatically change to 6.52 to get the correct start Time and End Time.(eg: 08:00 - 15:31)
Manoj.

Iphone 4 error 2001 and 2006

For some reason yesterday my phone just went off (had plenty charge) hasnt been dropped or near water.
when i got home i plugged my iphone into my mac which opened my phone up to the initial ios6 grey setup screen and then told me to plug into itunes.
i have followed apples instructions on this to the absolute letter but i constantly get this error message either 2001 or 2006, just before i get this the iphone screen flashes white, ive also tried a pc and 4 different usb cables to none of these are the problem.
the phones out of warrenty so taking it to apples a last resort and hopefully someone on here can help!
thanks in advance
to note im running the most current version of itunes,up to date ios 6 and mac running mountin lion

If you tried this:
http://support.apple.com/kb/TS3694#error2001
Then perhaps the phone needs servicing as stated in the article...

Cannot restore iPhone 5, iOS 6.1.4, error 2001 and 2006

My iPhone 5 (AT&T, purchased on March 2013) suddenly went blank - without being dropped down, or *drowned* in water/ liquid - then a blinking (Apple) logo ...
Following Internet forums, I kept the "Home" button pressed a while, the sign of an USB cable attemting to connect to iTunes appeared.
iTunes asked me to restore, I agreed, it downloaded the "iPhone5,1_6.1.4_10B350_Restore.ipsw", then extracted, then verifying with Apple for a while, then appeared the message that this iPhone cannot be restored, error 2001.
I retried, same result, sometime the error is 2006.
I retried with another MacBook Pro, then iMac, same error 2006 or 2001 !
Strange thing : when trying in iTunes in Windows 8 (via BootCamp on those same iMacs, MacBook Pro), the error changed to error 21 !!!
I'd tried in several other ways :
01. DFU (pressing both "Home" and "Power" buttons ... ...),
02. turn off Intego/ Sophos/ ClamXav,
03. delete that .ipsw file to download a new one,
04. remove the iPhoneUpdater.log files, pretending to cheat the system
05. confirm via System Information that I am plugging the iPhone only to one of the USB Hi-Speed Buses (thinking error 2001 & 2006 relates to USB ports)
... the *iFool* beauty keeps sleeping like ... a brick !
Any help would be highly appreciated. Many thanks in advance.
BAKZOO.

Hey guys, i have the same issue.
Yesterday my iphone lost network, i turned it off, and wanted to turn on, but iphone didn't react.
Once i plugged charging cable in, apple logo appeared, then screen went black, then apple logo appeared once again. So it seems like iphone goes into reboot after apple logo appears.
I connected iphone to macbook pro while holding home button, itunes showed me iphone 5 in recovery mode, then iOS was downloaded, but recovery didn't even started. Every time it shows me 2001 error. Sometimes recovery fails with 2006 error. I tried to change USB port, tried another original USB cable, tried another macbook pro, both are updated to OS X 10.8.4, iTunes 11.0.4(4), but the same 2001 error comes up over and over again.
I did everything that official support advises on this page http://support.apple.com/kb/TS3694?viewlocale=ru_RU&locale=ru_RU#error2001, but nothing really helps
Any ideas on what might help? There's no Apple stores here in Uktraine so i can not return my iphone and get a new one

Hi, my iphone 5 will not restore through iTunes. Error codes 2001 and 2006 appear. Please help.

Hi,
My iPhone5 will not restore through iTunes. Error code 2001 appears and once I received error code 2006. Please help?

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Getting relation between infotype IT0007 and table T550A

Hi experts,
My requirement is as follows. For an employee work schedule rule(field SCHKZ) is maintained in the table IT0007. For every work schedule rule there is start of planned work time( SOBEG ) and end of planned work time(SOEND) in the table T550A.
Can anybody please help me in getting a relation between these two tables.
Thanks,
Manasa.

Hi ,
Use the below FM to get SOBEG , SOEND ...
RP_CATT_DAYPROGRAM
Regards,
Srini.

Conectivity between BIW infocubes and Business Object (BO)

Hello everybody
I need to create some reports using BO that access to BIW infocubes. Do you know if there is any direct conectivity or if it can be done using any other tool as ODBC or whatever?
Any documentation about this subject will be appreciate.
Regards, and thanks in advance, Inma

Hello,
There is direct connectivity to BW infocubes as well as to BW queries.
You can find some documentation at the following link:
http://support.businessobjects.com/documentation/product_guides/

When trying to restore my iPhone 4 on iTunes, an error (2001 and 2006) pops up and prevents me from restoring my phone. What can I do to fix this problem?

I have updated my itunes and computer software, as well as held down both the lock and home buttons on my iphone. I have contacted my carrier tech support and apple tech support but nothing has worked thus far.

Also look here.
http://support.apple.com/kb/TS3694#error2001

Conection Between R/3 and MDM

Hi techies
I am new to this MDM concept
How can we connect MDM to R/3 and how can we import the file from R/3 or any other server
on windows or solaries
Thanks in Advance
Haroon

Hi Haroon,
for extracting the data from R3 to MDM, you can use the following option:
1.MDMGX-MDM generic extractor for extracting all the reference data (look up table data) from R3 to MDM. use can use the transaction as "MDMGX".
2.Extract the master data (Main table data) from R3 to MDM, you can use the transaction as "MDM_CLNT_EXTR".
the above these two transactions, the standard transaction for extracting the R3 data to MDM.
Insteed of these two option, you can go with IDocs, Proxies etc. but out of these option like IDOC or Proxy, go with Idoc as SAP is recommanded.
Hope this will help you,
Regards,
Saurabh..
Reward with points if found helpful.

HR_BLP_SAVE_TIMEDATA and how to load high volume records onto Infotype 2001

Because of high data volume (estimated 1 million records each run) and short SLA time requirement (runs every 2 hours), we chose to use functions that are called by CAT6 (Skipping the CATS to HR info types loading process) to load the time records directly into Infotype 2001 and Infotype 2002.
Now we discover that some records (sporadically and randomly) don't get loaded onto the infotype and they don't return from the error message table either. We are wondering whether anyone has used these functions before, and how they resolve the issues of missing records / error handling.
We are also wondering if there is any other feasible solution to meet our customer's need.
The two functions we use are: HR_BLP_MAINTAIN_TIMEDATA and HR_BLP_SAVE_TIMEDATA

Hi Curt,
No, they are 32 bit RGB. I have just made an 8 bit RGB and it gives me the option. Thank you for your help

Relation between REGUH table and Infotype 0015( PA0015table)

Hi Experts,
Can anyone provide some info. about use of REGUH table. Like when it is used/updated esp. in context of HR Payroll?
Functionally,What is the relation between Infotype 0015 and REGUH?
Thanks
Achyut

hi,
REGUH table stores the amounts which are used for check printing and bank transfer for an Employee.
this table is updated by running a program called 'pre-program DME'. once you update this table, then you can print checks/ perform bank transfer.
so this table holds all the amounts even WT's amounts given in IT0015.
hope i answered your question.
if you have still queries, just revert back.
regards,
salman.

How to extend IDOC type "HRMD_A" for infotype 2001?

Hi,
I'm trying to send infotype 2001 to another SAP system via ALE and since it is not part of message type "HRMD_A" I have tried to create an extension. I've already created a new segment(we31) and put this segment into the extension(we30). And I've assigned the extension to the message and basic type (we82) but it still doesn't work. Is there anything else I have to do?
Many thanks in advance
Christopher

Hello Christopher,
I don't think any coding is required in your case if I understand your issue correctly.
Just create a Z segment (say Z1P2001...make it same structure as P2001) then insert it as a child segment type of E1PITYP in your customer extension which should be attached to Basic Type HRMD_XX (as per your SAP release).
Make sure in the partner profile you have specified the name of your customer extension and in table T777D you have maintained the value of your Z segment (Z1P2001) in the field IDOC segment.
Now, as long as you have change pointers activated globally as well as for the message type you are using, change pointers will be auto triggered for infotype 2001 and when you run BD21 to process the change pointer, you'll see the system has automatically populated your customer segment Z1P2001.
Let me know if it solved your case.
Cheers,
Sougata.
Edited by: Sougata Chatterjee on May 23, 2008 1:41 PM

How to add record in infotype 82 and correspondingly to infotype 2001?

Hi All,
I need to create leaves. I can do it by using "HR_INFOTYPE_OPERATION" and create records in infotype 2001.
But I also need to create corresponding records in infotype 0082.
I have the leave types as stored in infotype 2001, like PCPI, PVCL etc.
But I found that the SUBTY value stored in infty 2001 is different from that stored in infty 0082.
How can I find the relation between these two SUBTY so that I can create the records in both infotypes.
Please reply back if someone knows how to create the leaves in these 2 infotypes.

Hi Ganesh,
I could get the relation between the SUBTY in infty 2001 and infty 0082 from the table T554S.
But I could not add the records to the two infotypes simultaneously. I am adding them one after another.

Conection between Infotype 2001 and 2006

Similar Messages

Maybe you are looking for