Conection Between R/3 and MDM

Hi techies
I am new to this MDM concept
How can we connect  MDM to R/3 and how can we import the file from R/3 or any other server
on windows or solaries
Thanks in Advance
Haroon

Hi Haroon,
for extracting the data from R3 to MDM, you can use the following option:
1.MDMGX-MDM generic extractor for extracting all the reference data (look up table data) from R3 to MDM. use can use the transaction as "MDMGX".
2.Extract the master data (Main table data) from R3 to MDM, you can use the transaction as "MDM_CLNT_EXTR".
the above these two transactions, the standard transaction for extracting the R3 data to MDM.
Insteed of these two option, you can go with IDocs, Proxies etc. but out of these option like IDOC or Proxy, go with Idoc as SAP is recommanded.
Hope this will help you,
Regards,
Saurabh..
Reward with points if found helpful.

Similar Messages

  • Conection Between R/3 and BW

    Hello Experts
    I need to creat a conection between R/3 and Bw. I have some documents that show me how i can do this, but the documents are for ECC 6.0 version of SAP and my version is 4.6C. Please, help me this issue If someone have a document for 4.6C version, will be a great help.

    Hi,
    Once all ur enviroinment is done, i mean ur Add ons, Proper Plug -ins etc...Goto SALE--> Create a Logical system in both the side of system and Assaign the same. Then goto SM59 Create a RFC destination in both the sides, Define the host r server name and in log on tab in BI system, Give the R3 user id and Password, In R3 side logon tab, give the BI User id and Password.
    U can connect RFC through ur back ground User id as well.
    Thanks,
    Srinivas.

  • Conection between Infotype 2001 and 2006

    Hello experts,
    i´ve got the following problem: I had to book an absence in infotype 2006.
    I want  do this with via BAPI BAPI_PTMGRATTABS_MNGCREATION.
    So far it works. My problem is that i don´t know the value for ABS_ATT_TYPE (it´s a value of infotype PA2001-SUBTY) but i only got the value of of infotype 2006 (PA2006-SUBTY). These 2 values are NOT the same and i don´t know how to match them. Is there any FM or BAPI which tells me the correct PA2001 value for my PA2006 vlaue?

    Hi Benjamin,
    2001 -> Absences
    2006 -> Absence Quota
    From the look of it , BAPI_PTMGRATTABS_MNGCREATION seems to be used to create Absences and not Absence Quotas.
    Have you tried using HR_INFOTYPE_OPERATION to create Absense Quotas ?
    Also, have a look at table V_556R_B. It will give you the relation between 2006 and 2001.
    Regards,
    Jovito
    Edited by: dsouzajovito on Jan 24, 2011 2:27 PM

  • Conectivity between BIW infocubes and Business Object (BO)

    Hello everybody
    I need to create some reports using BO that access to BIW infocubes.  Do you know if there is any direct conectivity or if it can be done using any other tool as ODBC or whatever?
    Any documentation about this subject will be appreciate.
    Regards, and thanks in advance, Inma

    Hello,
    There is direct connectivity to BW infocubes as well as to BW queries.
    You can find some documentation at the following link:
    http://support.businessobjects.com/documentation/product_guides/

  • JAVA aplication and MDM

    Hi forum,
    We've created a XI 3.0 scenario in order to make an integration between JAVA applications and MDM
    The JAVA application needs the Message Type "XML Namespace" field to be filled, but MDM doesn't import the sent xml messajes through this scenario because "doesn't accept" those xml with this field.
    We think we could eliminate this field in Message Mapping through XSLT Mapping, is this possible?
    how could we do that?
    any idea?
    King regards

    Hi
    I understood this is ignoring one source field.. in mapping to target message using XSLT .
    it is possible..just don't write this field in target message output generation module.
    thanks,
    venu.

  • SSO Connection Between Netweaver CE 7.2 and MDM 7.1

    Hi ,
    I am trying to set up SSO connection between Netweaver CE 7.2 and MDM 7.1 systems in our landscape.
    But Iam not finding the MDM template in Netweaver CE to create the MDM system in System configuration tab of CE.
    Please help me on how to go about to create the SSO connection between CE and MDM system.
    Regards,
    Anand V

    Hi Shiv,
    The MDM content business package  MDM JAVA WD FRAMEWORK 7.1 7.11 and  MDM WEB SERVICES_RT 7.1 7.11 based on Note 1471326 have been Installed on CE but the restart was not taken.
    Is the frestart necessary to get the MDM template?
    Regards,
    Anand V

  • Differences between MDM 3.0 and MDM 5.5?

    Hi,
    Can anybody tell, what are the differences between MDM 3.0 and MDM 5.5?
    I heard that, there are lot and lot of changes...
    Thanks for your reply,
    regrads,
    cg

    We can look at differences in more than one way:
    1. Technology wise
    MDM5.5 is developed in C++ & runs on a C++ engine as compared to MDM 3.0 which runs under WAS
    However MDM 5.5 is integrated with NW largely, though it can & is planned to be improved further
    2. Product Catalog Management
    MDM 5.5 has rich PCM capabilities which did not exist in MDM 3.0
    3. Other additional capabilities in 5.5
    Multilingual support
    Syndication of data to XI or file system
    Lean, R/3 Idoc based model for supplier, customer, material, employee
    4. Ease of installation and usage is a also an advantage of 5.5
    You can read Nitza Levi's blog on MDM home page for more details

  • Network bandwidth requirement between MDM server and MDM Clients

    The MDM Sizing document for 5.5 states that  'a network connection between MDM Servers and MDM clients should be at least 100 Mbps'. Is this true? This would preclude MDM being offered as a hosted service. I'm interested in MDM Catalogue for SRM, so the catalogue content managers would need the import and data manager clients.

    One factor I noticed, in our project...
    I would recommend a 4 GB RAM for someone who is working with Import Manager.
    As far as the Network connection goes, I am not sure what the requirements are.
    We have faced several issues when the end user's laptop are less than 2 GB.
    If someone is working with Image Manager, then I would recommend 4GB.
    For bulk imports, I would use Import Server.

  • Connection between Portal and MDM

    Hi all
    Can anybody help me on how to establish the connection between portal and MDM with step by step procedure.
    i am new to this combination .
    before i worked with portal but not worked with MDM .
    Regards
    Suresh babu

    Hello Suresh,
    As of my knowledge MDM IViews have the advantage to ful fil your neeed to provide connectivity moreover,that they are not complex in structure and are therefore not restricted by any underlying schema structure. As opposed to regular iViews in other systems which are embedded into the pages on which they appear, MDM iViews are more generic and granular in nature enabling their placement on a page to be more adaptable.
    The SAP Enterprise Portal (SAP EP) offers templates for creating the iViews. The following are some examples of these templates available at the link:
    [http://help.sap.com/saphelp_mdm550/helpdata/en/45/c9f8cac2124ebee10000000a11466f/content.htm]
    Procedure:
           1.      Create a new page using the page wizard.
           2.      To see the iViews you created on the new page, you need to link them to the page. Right-click each of the iViews that you created and from the context menu, select Add iView to Page → Delta Link
           3.      Double-click the new page you created and select:
    Page Content to view a list of the iViews that have been linked to this page
    Page Layout to view the layout currently assigned to this page. The iViews can be rearranged using the drag&drop function.
           4.      The visual structure of a page can be changed with the Page Layout function. Select Define Layout to reset the layout of the page.
           5.      Select Preview to view the page showing how the iViews have been arranged. The preview simulates what an end user sees at runtime.
    Detailed pictorial presentation available at:
    [http://help.sap.com/saphelp_mdm550/helpdata/en/45/c8e2fa5f0c2e97e10000000a155369/content.htm]
    Hope you will find it helpful.
    Regards,
    Krutarth

  • How to get MDM communicate between Razr HD and computer

    I hooked up my new Droid Razr HD running 4.1.2 to my computer running W7 Enterprise and it registered as a CD drive E: containing 32 MB and no free space, containing the MDM drivers, setup, and autorun files.  I got the popup asking to install the MDM, and clicked on that, and closed all other running applications.  Seemed to install, but the drive listings in Explorer did not change to show a mass storage drive.  Phone does have Settings-USB Storage-MTP checked.  I uninstalled MDM, went to the Motorola website and downloaded the latest version of MDM.  Installed, same result.  Tried running Microsoft FixIt to see if there was a registry problem, so CD E: MDM was taken out of the listings in Explorer.  Reinstalled MDM from the Motorola website.  Same result, except now if I click on MDM setup in Explorer, nothing happens.  I want to transfer files from my computer - pictures, mp3's, files, etc - from my former Blackberry that were saved to my computer. 

    You could try Blue Tooth. That's how I prefer to transfer files between my laptop and Razr.

  • I am having one application which i am going to install on my ipad and i am having one external device having USB interface. I want to have communication in between  my device and ipad over USB/BT. is it possible

    My external device is having male USB connector. The cable available in market are having can be plugged to the device having female connector.I will need converter in between as my device is having male connector. Can i get such cable? If yes can i establish communication in between my app and device over these cables.I am not passing any audio/video data or photos.I am sending data frames. My device is having firmware and it sends data frames in firmware understandable format. Let me know can i have two way communication in between over USB/BT?
    Right now i am connecting my device with host PC and i want to replace my host PC with ipad.

    Thanks....
    will it be possible to establish communication in between my device and app. Because camera conection kit only transfers photos and videos and my device doesnt have any audio/video data.
    If yes, should i add photo header to my frames and will send as corrupted photo file or what needs to implement so that i can have sound communication in between.

  • Difference between NetWeaver 2004 and NetWeaver 7.0 or 7.1

    I am little confused and curious to know the recent changes happening in SAP.
    Can you please tell me the differences between NetWeaver 2004 and NetWeaver 7.0 or 7.1
    NetWeaver 2004 is named because SAP has released it in 2004
    and then we have XI 3.0, XI.7.0(that is PI right) , EP6.0 etc as individual components have different versions released in NewtWeaver suite.
    But what is this NetWeaver 7.0.
    We have EE5 or ECC6 and WebAs 6.4 or GUI 6.4 or recently GUI 7.o or WebAs 7.0.
    How does all these differe, is individual component of NetWeaver upgraded with higher versions or total NetWever is upgraded with a higher version.
    Can any one please tell me the exact difference between versions.
    If some one has ECC6 installed in their environment does it mean that they have Netwaver components like XI, EP, MDM.. etc are installed or its only R/3, BI etc...
    How it works exactly?
    Thanks,
    Kiran.

    Pretty much everything is explained in here:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 – Overview of New Capabilities</a>
    I think there's a weblog with a concise list somewhere, but I dont have the link saved.
    Hope that helps.
    James.

  • ISE 1.2 and MDM integration.

        What kind of device information I can collect by MDM integartion with ISE.              

    Hello,
    ISE  Release 1.2 delivers integration between Identity Services Engine and  MDM platforms, which can ensure that all mobile devices are compliant  with security policy before they are allowed to access the network. This  feature enables posture compliance assessment and network access  control of mobile endpoints attempting to access the network. The  solution also performs ongoing posture checks to ensure that devices  remain compliant and that the correct network access level is  maintained. The specific posture attributes collected by MDM partner  platforms for compliance and access policy enforcement in the Identity  Services Engine are:
    • Is the mobile device registered with MDM?
    • Does the mobile device have disk encryption enabled?
    • Does the device have PIN-Lock enabled?
    • Has the device been jail-broken/rooted?
    In  terms of global compliance, posture compliance decisions may be made by  the MDM platform instead of the Identity Services Engine. In this  scenario, additional attributes such as blacklisted applications or  presence of an enterprise data container may be checked. The MDM  platform simply informs the Identity Services Engine if a device is in  compliance, then the Identity Services Engine enforces the appropriate  network access policy.
    This  integration brings great value to MDM customers as it automates to the  device registration process. As MDM solutions are network-blind, they  can't detect a new device when it connects to the wireless network, so  the administrator needs to send a notification to the users who wish to  enroll their devices. With ISE integration, device enrollment is done  automatically when users connect their device to the Wi-Fi network.
    SNS appliances are now available with ISE 1.2 in SNS-3415-K9 and SNS-3495-K9 appliances.

  • Regarding the SAP PI 7.0  and MDM 7.1 ....!

    Hi All,
    As i was going through the Documents on the SAP PI 7.1 ...where i came to know that we have a seperate MDM Adapter which is used to Exchange Data Between SAP PI 7.1 and MDM 7.1 ....then i was wondering that how can we use SAP PI 7.0 to connect with SAP MDM 7.1 ?    IF SO , then are what all we need to Do in SAP PI 7.0  ? and is there any restrections that we need to look for while connecting between  SAP PI 7.0  to MDM 7.1 ?
    I hope i may get some answers ....!
    Thanks in advace
    Aziz khan

    >
    Aziz khan wrote:
    > Hi All,
    >
    > As i was going through the Documents on the SAP PI 7.1 ...where i came to know that we have a seperate MDM Adapter which is used to Exchange Data Between SAP PI 7.1 and MDM 7.1 ....then i was wondering that how can we use SAP PI 7.0 to connect with SAP MDM 7.1 ?    IF SO , then are what all we need to Do in SAP PI 7.0  ? and is there any restrections that we need to look for while connecting between  SAP PI 7.0  to MDM 7.1 ?
    >
    > I hope i may get some answers ....!
    >
    > Thanks in advace
    > Aziz khan
    https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/604b3c0c-5b6c-2b10-cc83-a7af75c70eaf&overridelayout=true

  • Artesia and MDM Integration

    Has anyone enabled the link between Artesia digital asset management (DAM) tools and MDM?  We keep all our product images in Artesia (tool is called TEAMS) and would like to point our MDM-based product info repository to Artesia so that we don't need to import images directly into MDM. 
    Also, we use Documentum for management of our product literature. Does anyone have experience integrating MDM and Documentum?
    Thanks.
    Mike Jakeway
    Lead Technical Analyst
    Whirlpool Corp.

    Hi Michael,
    I have come across the similar case once but not using DAM.
    First let me understand your requirements clearly.
    You dont want to import images to MDM repository. Instead you want to point the product data stored in MDM to its corresponding image stored in DAM.
    This is simple if your environment is applicable to any my assumptions mentioned below.
    My assumption 1:
    You have implemented DAM tool for managing images newly and no application or data base linked with DAM.
    My suggestion 1:
    Artesia should be storing images in a database with a field for "image id" right? In that case we can add a new field for "Product id" in the DAM database (if not exists) and map the image in the DAM with the Product data using "Product id" field from source data (DAM) and "Product id" field in MDM. Syndicate MDM with DAM database. So that when ever you add a new product data, a new product id will be added in your DAM database.
    My assumption 2:
    You have already inplemented DAM tools and developed application (Say .Net) for managing the product data. Now you are planning to move the product imformation to MDM and view the product detail in the portal (Say SAP EP) iview.
    My Suggestion 2:
    If you are planning to view the product data and images in the portal, we can develop coustom iview which retrieves product data from MDM and image data from DAM.
    Same case appicable to Documentum management.
    Let me know in detail if have some other scnarios.
    Thanks,
    Prabhu

Maybe you are looking for