Conection through DB_LINK

Hello,
I wold like to know about conection betwen SAP e another software.
Specifically I would like to conect Oracle (another softaware) with Oracle (SAP) throug DB_LINK, only read access.
Is it recomended by SAP or there are some restrictions to use these model?
Thanks in advenced.
Mary Nuvoloni
SD Consultant

Have you looked at Multiconnect option? See note 323151.
-RK

Similar Messages

  • Can I install os on a hard drive conected through usb

    Can I install a OS on a hard drive conected through usb On my macbook pro?
    Thanks:)

    Will not work.
    Mac is not capable of running older version then it shipped with originally.
    Allan

  • Query to find the Views and synonyms that are accessing through db_link

    HI all,
    Oracle 10g
    I need a Query to find the Views and synonyms that are accessing through db_link.
    ie.
    database A have the db_link to database B through a schema A
    now i need to find what are the Synonyms and views that are accessing through db_link either directly or indirectly..
    regards,
    Deepak
    Edited by: Deepak_DBA on Dec 10, 2010 5:38 PM

    On the second database (B) use this query to find the SQL which used by the schema A (DB LINK USER). Check the SQL_FULLTEXT column.
    select sql_fulltext,sql_id,module,parsing_schema_name,parsing_user_id,first_load_time,loads,users_executing,rows_processed,plsql_exec_time,sorts,fetches,invalidations,parse_calls,cpu_time,elapsed_time,disk_reads,buffer_gets
    from V$sqlarea
    where parsing_schema_name = 'A' --and to_char(first_load_time,'dd/mm/yyyy') like  '%11/08/2007'
    order by first_load_time desc;
    Regards
    Asif Kabir

  • Itune wont read conection through the sync...

    somebody please help me out
    i been working for like 4~5hours and serching on web too..
    but still havnt found solution yet..
    i went to help>Run Diagnostics
    but this is what i got back.
    and my iphone wont bootup.
    its like frozen at apple rogo
    Microsoft Windows 7 Business Edition (Build 7600)
    Hewlett-Packard HP Pavilion dv2700 Notebook PC
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3.1
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver not found.
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 24C25624EBE88134
    Current user is not an administrator.
    The current local date and time is 2010-08-11 12:24:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 7150M / nForce 630M
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.
    iTunesHelper 9.2.1.5 is currently running.
    Apple Mobile Device service 3.1.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
    ** Device Sync Tests **
    No iPod, iPhone, or iPad found.
    please help me out ~

    Btw using Win 7 Home 64bit

  • HELP!!! DBMS_UTILITY.FORMAT_CALL_STACK DOES NOT WORK THROUGH DBLINK

    Hi,
    If I call procedure through DB_LINK, FORMAT_CALL_STACK return nothing.
    Can I somehow to define the name of procedure, that call me?

    I am having the same problem.
    I need a way to trace the path, even when the code is called from Forms.
    Any ideas??

  • HT1386 i just purchaseed a new computer  i want all my music on the new computer it will not let me sync music from my ohone to computer says phone cannot be sync to two library  i do not understand this  my itunes is MY itunes WHAT is the problem HELP PL

    I purchased a new computer i cannot sync my phone"s music to the new computer.  alll my music is on the iPhone  i need to sync it to computer it should be on my iTunes account it conects through internet  but it is not there when i try to sync the phone it says it will erase it and replace it with the new library  which contanes nothing  could they make this iJoke crap a little more complicated .   any help would be appreciated  maybe my best bet would be through the iphone in the trash  and buy a samsung or an HTC  please help

    Did you authorize your new computer in iTunes under the Store menu?

  • How to store data into a file from a host VI developed for Compact RIO

    Hi,
    I am new to the CompactRIo.I have developed a VI which runs on the FPGA(CompactRIO) which continuously monitors tha data from a system and i have developed a host VI to read the data and i am successfully getting the data into my computer and i want that data to store into a file.When i use the write to spreadsheet VI for writing into a file.The data is not written into file can anybody tell me why this is happening?

    Hi,
    The last one you said is working when i conected through it is working, whatever files i have  used earlier are there.Thanks  for that but i have few queries please answer me so that i acn proceed in my  project.
    1.As you said to connect to ftp://xx.xx.xx.xx i have seen some extra files along with my files waht are they? waether my data files are stored in flash memory of RT controller?if so, how to clear those files?
    2.Suppose i want to clean up the flash memory of RT contrller i.e suppose i have deployed some file earlier , now i want to cleanup those i dumped into the memory how to do that?
    3.How to disable the Application running on the RT controller when it powers on? i.e. when i switch on the power it should be connected but nothing hould be running on.
    4.I mean at the end of the experiment when i stopped the host VI by pressing stop button weather application running on the RT controller will stop and weather FPGA VI runnibg on that also stop if not how to stop?
    5.Suppose next time when i connect to ftp://xx.xx.xx.xx i dont want to keep earlier files there how to delete them?Because my doubt is if i am using the file name which is same as the prevoius one there is aproblem of appending the new data to the old file.?
    Regards,
    Vishnu

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • External Hard Drive has "Disappeared"

    I have a Maxtor One Touch II External drive conected through a Firewire 800 cable which I use for Time Machine. The drive got switched off a couple of weeks ago, but when I switched it back on it would not mount. The drive sounds like it is running normally.
    Having searched the boards, I've tried the following:
    OS X Software update (I'm on 10.6.8)
    SMC reset
    PRAM reset
    Disk permissions repair
    Disk repair (from install disk)
    Creating a new user account
    Connecting the drive via USB
    Onyx and Cocktail scripts
    When I run Profiler the drive shows up under Firewire Bus as "unknown device", the details are:
    GUID 0x0
    Maximum speed: up to 400 Mb/sec
    Connection speed: unknown
    When I enter "diskutil list" in Terminal I get the following:
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            499.8 GB   disk0s2
    Any more suggestions? Or is my drive ready for the recycling bin?
    Thanks, Noel

    Thought you could use this info about getting FireWire to work! (I'm assuming the One Touch is FireWire; some of this works for USB too)
    First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
    Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
    If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.3.9 Combo update. Others reading, download the Combo that applies to your system.
    If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
    For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
    Good Luck!
    Cheers!
    DALE

  • Unable to share music between a Windows 7 64 bit and Vista 32 bit

    I have a 32 bit windows vista computer and my wife has a 64 bit windows 7 computer,both of us have home share on, we are conected through wired router and can share docs pictures and just about averything else on our PCs but when we try to share our I-tunes we can see each other music and play the music but we can not add any of the songs to our play list  Any help why this is a problem

    We don't get the "Items not in my Library" and we can not click and drag items to each others Librarys

  • I am having trouble printing via wireless with HP Office Jet 6500A printer in our new residence. It worked in our other house but not here. I have to print via USB connection

    Any ideas on how I can get a regular wireless connection with HPOffice Jet 6500A from my Mac Book Pro? It used work well and wirlessly in our previous home with a Broadband conection through the router. Would moving to ADSL have caused the issue now or is it the printer? I have had it work about three times but have resorted to plugging in via USB port. Two viviting techos have not been able to fathom it out either.

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please complete or update your system profile so the users here can properly help you.

  • Variable substitution issue

    Hi all,
    I've a select against a view (V_XXX) which performs drammaticaly different if run in this two ways:
    SQL> SELECT COUNT(*) FROM METOD.V_XXX
    2 WHERE MATRICOLA LIKE '%'||LTRIM('310491A')||'%';
    --> 50 msecs.
    SQL> VARIABLE var VARCHAR2(10);
    SQL> EXECUTE :var:='310491A';
    SQL> SELECT COUNT(*) FROM METOD.V_XXX
    2 WHERE MATRICOLA LIKE '%'||LTRIM(:var)||'%';
    --> 17516 msecs.
    Explain plain shows that in second case all the joins present inside the wiev are parsed by oracle...whilst it doesn't happen using the direct select.
    Thanks a lot for help...
    Marco

    Optimizer is cost based...
    In any case the issue seems to be linked to the presence of db_links.
    The issue happens when my select runs against a view (on my 'local' instance) built against three synonyms, all of them are created against remote db objects through db_links.
    Building the same view directly inside the remote db and creating a synonym (with a db_link) on my istance, my select has the same performance using a constant or a variable in the where clause (so no issue!).
    If someone can explain, what is happening...
    Thanks, Marco

  • Photoshop from CS5 crashes when I access FILE/Print

    This is since upgrading to Mavericks v10.9
    27 inch iMac5 2years old. Ram 12GB Mac HD 1TB.
    Exxternal Drives:  
    My passport HD "My Creative store" 1TB. 
    Seagate HD "One TB" 1TB.
    Pasport HD "Mac Backup 2" 2TB.
    net conection: Ethernet cable to Virgin media Super hub
    epson Scanner, Epson R2400 A3 printer,  Wacom Intuos 3 Tablet.
    All conect through Pluscom 4 port USB 2 to mac.
    4th USB port used to connect USB memory sticks downloading file from camera.
    I run Photoshop CS5 and Bridge, Some times Ilustrator.
    Corel PainterX3
    I can print successfully from within Painter whith limited control
    I can exchange RIFF, PSD, Tiff, CR2, JPG between these Applications.
    I cannot print any from within Photoshop CS5
    I have Downloaded Epson Printer drivers from UK and USA, 2 different files, the US a one is said to be specifically for Mavericks OS10.9
    Niether cures this afore said problem.
    I have contacted Epson support and the say if I can print from another Appication there is nothing wrong with the drivers and the printer and Referred me to yourselves.

    I have since completely wiped maveric. Partitioned an 8GB USB stick and installed Mountain lion and then cloned that back onto the mac and things work fine now.
    I clone back to the Stick each week. All done with the help of a Tech friend.

  • Imposible to change ntsc to pal resolution

    For an unknown reason, my mac mini has decided that my monitor is now ntsc, and everything is terribly ugly.
    Fonts and colors are really bad.
    Only things I have done is conecting through mini display port or hdmi. display port for monitor and hdmi for TV.
    Anyone knows how can I force mac os to PAL refresh? Why has it decided to change?
    Software is up to date.
    Thanks

    Try a PRAM reset.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html

Maybe you are looking for