Conexant audio device driver won't install on T510 with windows XP SP2

I am having trouble in installing audio driver for Conexant audio device on an SSD with windows XP SP2 installed already. After running the installer, it tries for a while, and says media device can't be found. But booting from the win7-loaded internal drive, I can see it in the device manager. I also see a few devices like base system device(?) in 'Other devices' category. Could you help me get audio on the windows XP?
Solved!
Go to Solution.

Hi,
Thank you very much for your reply that led me to helpful information. Unfortunately, it didn't fix the issue, but I think I'm closer to the resolution of this issue.
So, I believed I installed Intel chip set and power management drivers, but did uninstall and re-install including .NET F/W 3.5. Unfortunately it didn't work.
Your link led to pages of unknown/driver-less drivers and made me check more detail. I had only 2 PCI devices left in 'Other devices' category, so I checked the details of those as below:
1. PCI\VEN_10DE&DEV_0BE3: I searched this item on the web, finding that the vendor is Nvidia, but could find device 0x0be3.
2. PCI\VEN_8086&DEV3B56: this is vendor Intel, but again no device found. The closest one is SoL device, though.
So, it appears somehow the Conexant audio device is not even in 'Other device' category, and the intaller can't find the device. I wonder if some other driver grabbed this device, so it's not available for driver installation. I will do more investigation, but please help me address this. Thank you again, and in advance.
P.S. : I don't see the SoL driver installed after installing Intel drivers, and there is no 'Ports' category in the device manager, either.

Similar Messages

Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

HELP!!! I can't connect my iphone 3gs or my ipad2 since the 10.5 upgrade. When I connect either of the devices my PC says the driver is being installed but then it fails. HELP HELP HELP HELP!!!

Hi Tom,
it's very well possible that something is wrong with the amount. I have 4 different DIMMs installed: 64, 128, 256 and 512MB. The one of 256 MB might be the problem, so I've decided to take it out and we'll see what happens.
Meanwhile, I have to explain that my G4 has to 2 HDs, the original HD w/ OS 9.2 and a second bigger one w/ OS 10.5 (which doesn't want to start up again).
With the original HD as startup disk, I can still boot in OS 9.2 and that gave me the opportunity to check on the memory. Well, what I found out is that the RAM-disk was turned OFF (for both HDs). At the same time I remember that in OS 10.3 I had a problem with time/date reset, something that always would occur after unplugging the power cable. I always assumed it was a dead battery but today I had the battery checked and it's still ok, so I figure it must be something else. Perhaps the RAM disc that is turned off? Shouldn't it be on?

Installing Dreamweaver CS3 with Windows Xp Sp2

Hi, I'm having trouble installing the Dreamweaver CS3 trial
in my Windows XP SP2 machine.
I dont know if I have an adecuate processor, that seems to me
its the only one of the requirements I might not complete.
I have an AMD Athlon 2500+ processor with 1Gig of ram... the
last Dreamweaver runs smoothly.
Can someone tell me if this processor is P4 compatible, Xeon,
CoreDuo, etc. compatible.
If so, whats the problem with the installation, because it
begins but shuts down automatically.

quote:
Originally posted by:
JUANSEBORUCO
quote:
Originally posted by:
SnakEyez02
What stage is the installer closing at?
Just like danglyfury said, it decompresses, then a progress
bar appears, and suddenly it disappears and that's it.
You guys aren't the only ones having problems. I'm having the
same exact problems myself. If you take a look at this forum
thread,
http://www.adobeforums.com/cgi-bin/webx?14@@.3bc3b755/57
they offer possible solutions for Photoshop CS3 - because the
installer is the same, the solution works for dreamweaver as well.
Unfortunately for me, I've tried all of their possible solutions,
no luck. It baffles me why Adobe would package all their new
software with such a buggy installer. Anyhow, if anyone has any
other suggestions, I'd appreciate it.

Lightroom 5 upgrade won't install on PC with Windows Vista

I seemed to download the Lightroom 5 upgrade just fine to my PC. But nothing happens when I double-click the application in my downloads folder. And there's no LR5 icon on my desktop. Is there a trick to it?

Please check the system requirement.
Lightrrom 5 is only supported on Microsoft® Windows® 7 with Service Pack 1 or Windows 8.
http://www.adobe.com/products/photoshop-lightroom/tech-specs.edu.html

Satellite L50-A00V Notebook missing compatible High Def Audio Device Driver

Hi
I bought a Toshiba Satellite 15.6" L50-A00V Notebook
Features
PROCESSOR: 2.4GHz Intel Core i7-4700MQ Quad Core Processor
SCREEN SIZE: 15.6" Display
RAM: 8GB RAM
HDD: 750GB HDD
GRAPHICS: nVIDIA GeForce GT 740M 2GB With Optimus + Intel HD 4600 Graphics
OS: Genuine Windows 8 (64Bit)
Bluetooth: Toshiba Bluetooth V4.0 (High Speed)
LAN: 1Gbps LAN
Wireless Connectivity: Intel 802.11 b?g?n
Connector: HDMI?USB3.0
Running windows 8 now upgraded to 8.1
since the minute I brought this notebook home a couple days ago its had driver issues and toshiba service station was nothing but a PITA it did work and nor did any of the other bloated software that came with it.. later when upgrading to 8.1 hoping that would fix a few probs, it made my driver situation worse..
anyways i have removed everything via a clean install (but left the recovery partitions etc for safe keep, and made a recover disc) anyways even after clean install i am still missing the High Definition Audio Device driver.. in device manager I get a exclamation mark next to it..
the other drivers that were missing i had downloaded their drivers from the manufacture and they all were fixed accept this driver.. i bekieve its a realtek driver, which I went to the site and their latest driver didnt help..
can anyone please help find a working driver please, im trying my best not to send it back, but if i cant get its drivers working, then the hell with it, im send it back monday morning and claiming a refund...
so please if anyone can save me the hassle of claiming a refund, i would really appreciate it..
thanks

Hi
The notebook seems to be released for Australian market.
I did not find the Win 8.1 drivers on the Toshiba Australian driver page but only Windows 8 drivers.
However, it seems that the sound card was made by Realtek and the Realtek HD audio manager should be installed.
Try this driver which was released on Toshiba EU driver page for the similar notebook models: [Realtek Semiconductor Corporation v 6.0.1.7023 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=178&selProduct=7948&selSh ortMod=null&language=13&selOS=46&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=2&ID=88586&OSI D=46&driverLanguage=42]
Generally speaking I would recommend you to download and to install the common Windows 8.1 64bit drivers from the Toshiba EU driver page because such drivers are missing on Australian driver website.
Would recommend you to install the Intel chipset driver as well as the nVidia driver because the HD audio can be related to the nVidia graphic chip too.

New Intel video driver won't install

The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTO

It could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Audio Driver for Compaq Presario SG3670IL Desktop with Windows XP OS

I'm not able to find the Audio Driver for Compaq Presario SG3670IL Desktop with Windows XP OS

Try one of the lower ones on the list at the following Realtek URL
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why won't my printer print with Windows 8?

Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1.     Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2.     Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3.     Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

Why won't Lion file share with windows 7?

Why won't Lion file share with windows 7? Is there going to be a fix?

Verysafety shareing file...

Install error 0X80080001 with Windows 7 RC1

Install error 0X80080001 with Windows 7 RC1

This Error Come when you have Intel Processor or if you dont that also you can solve the problem by getting whole detail.You will see the DVD Work in your friend P.c But show error in your p.c .get the solution from here.Web site: yadvi.com/how-to-install-window-7-in-intel-processor

Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

G60-audio drives won't install

have tried to install drivers for audio on G60-519wm they won't install any help. running win 7 home premium 32 bit
3 gb ram

Hi Stu
The original recovery media can be ordered by authorized Toshiba service partner in your country. If you want to find out more contact them. Addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
By usage of Microsoft full version installations CD you can download all necessary drivers, tools and utilities from Toshiba download site. There are no download limits and all stuff on download page is for everyone.
Toshiba policy is that you buy unit and OS with valid license. Toshiba dont force nobody to use just delivered OS. You can do what you want and install your favorite OS (if delivered with Home you can install Pro version). Because of that all drivers are on download page.

Apple Mobile Device Support won't install, keeps rolling back..

I'm using Windows 7 64bit and i have everything updated. Since I've upgraded my iTunes to version 10.1, I can't sync my iPod Touch with it anymore.
Each time I plug my iPod in,
- the iPod could be detected by windows but not iTunes, and I keep getting the same error message " "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64bit version of iTunes""
- my iPod shows up as "Apple Mobile Device USB Driver" in devices and printers
After searching through the internet, I've tried many fixes but none of them worked. I've tried,
- downloading the latest iTunes and uninstalling it and reinstalling it again and again
- uninstalling step by step and completely removed everything as guided by this website (http://support.apple.com/kb/HT1923)
- extracting the AMDS MSI file from the iTunes64setup and run it separately
- copying the registry files and the whole Apple Mobile Device Support folder from a Vista machine as recommended in some websites
- creating a new user account with admin rights and reinstalling iTunes again after completely removing everything
I've read a post (http://discussions.info.apple.com/thread.jspa?threadID=2531860) in which the user encounters a similar problem as well, and apparently the user solved this problem by replacing the files in C:\Windows\System32\DriverStore\FileRepository\netaapl64.infamd64_neutral26aa9fb28983e9b5
C:\Windows\System32\DriverStore\FileRepository\usbaapl64.infamd64_neutral36363f69e6e22c1b
with files he had extracted from the CAB files within the AMDS MSI installer from the iTunes64Setup download.
But the problem is, whenever I try to extract the netaap164 and usbaap164 files from the AMDS MSI installer, using WinRAR, it says that the archive is corrupted and thus I won't be able to extract these files out.
Can anyone give me any suggestions or teach me what to do? I'm really stucked and lost now. Thanks in advance. =)

After a couple days searching the internet for a solution I pieced togetherwhat my problem was from several forums and fixed it; maybe my solution/problemis similar to all of yours. (NOTE: I’m running Windows XP Professional, 32-bit,with Service Pack 3 – so you’ll have to translate my issue into your Windows 7format because I have no idea how to operate things is that version of Windows.)
I traced the error to the Apple Mobile Device USB Driver under"Universal Serial Bus Controllers" as others have too (everything inthe iTunes installation would install perfectly well except for Apple MobileDevice Support). However, my problem wasn't with the driver itself -- I had amissing .dll file on my computer for the Hardware Update Wizard (whenever Iwould 'right click’ any USB driver and select "Update", HardwareUpdate Wizard would not open; nothing would happen).
So, I went searching for this problem next, and I found this website: http://kf.livejournal.com/208963.html?view=2699587#t2699587
The page suggests that the problem is a missing .dll file called “newdev.dll”that should be located in “C:\WINDOWS\system32\” (again, I don’t know theequivalent folder for Windows 7, so someone else will need to find out where “newdev.dll”belongs) – I did a search of the .dll file on my computer and found it missing.However, I found another copy of it on my computer using “Seach Everything” (foundhere: http://download.cnet.com/Everything/3000-2379_4-10890746.html)– but, you can also use the Windows Search tool. There were copies located in “C:\Windows\system32\dllcache”and “C:\Windows\ServicePackFiles\i386”. (I would suggest searching for itrather than locating it manually in Explorer in case its in a hidden folder.)
I copied one of the preexisting files of “newdev.dll” and pasted it into “C:\WINDOWS\system32\”.Then I tried re-installing Apple Mobile Device Support and it worked (norolling back installation). When I plugged my iPhone back into my USB “AppleMobile Device USB Driver” reappeared under “Universal Serial Bus controllers”in “Computer Management” – all I had to do was “Enable” it again and I hadaccess to my iPhone in iTunes again.
Also, I had copied a preexisting file of AppleMobileDeviceSupport.msi to mydesktop prior to uninstalling everything, so when I tried to reinstall iTunesand Apple Mobile Device Support failed to install all I had to do later when Ifound the solution was reinstall AMDS. If you do not have a copy of “AppleMobileDeviceSupport.msi”try completely uninstalling everything (like so many other forums suggest, asdoes Apple, here: http://support.apple.com/kb/HT1925),and reinstall iTunes with the Hardware Update Wizard .dll file replaced. (I can’tsay if this entire reinstallation will work since I only had to install AMDS.)
Hope my problem was your problem as well.

ATI high definition audio device driver

Same problem as aldwellangel (04-30-2014): failed attempt to install device driver. The error message was preceded by a message box entitled "Installing device driver software" which said it was "Searching preconfigured driver folders ...". Problem started some months ago for no apparent reason, but its only effect seems to be to delay startup. At the same time a similar problem occurred with "IDT High Definition Audio Codec"; this was solved by installing the driver from the hp site.
I downloaded and installed the 64 bit driver in accordance with the posted Solution, but that made no difference. I then downloaded the 32 bit driver. It would not install, the installation program reported "No driver was supported in this driver package".
I am running an hp Pavilion dv7 with Win7 up to date.

Hey hgfr,
Try updating the chipset drivers. You can find these here: Intel Chipset Installation Utility and Driver.
Also, try reinstalling the GPU which controls the HDMI audio: AMD High-Definition Graphics Driver
If the pop-up is more of an annoyance it is possible to disable the popup from showing, but it's still going to search for new drivers each time you boot and will also hide other new hardware from showing up when connected. To do this:
Press Windows Key + R.
Type gpedit.msc and click OK.
Expand the Computer Configuration section on the left.
Expand the Administrative Templates section.
Expand the System section.
Click on Device Installation.
On the right you should see a list of settings. Double click on Turn off "Found New Hardware" balloons during device installation.
Click Enabled in the upper left area. (Yes, enabled. Not disabled. You are enabling the turn off feature.)
Click OK.
Close the Group Policy Editor.
Let me know if updating the chipset or GPU helps or if disabling the popup is OK.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Conexant audio device driver won't install on T510 with windows XP SP2

Similar Messages

Maybe you are looking for