Conf Phone 8831 do not display french locale...

Hi,
This phones do not display the French language.
Can you help me?
Here are the installed versions:
CUCM version : 9.1.1.20000-5
CUCM Locale : cm-locale-fr_FR-9.1.1.1000-1.cop
Firmware : sip8831.9-3-3-5
Thanks a lot,
Best regards,
Christian.

Hi,
Thanks for your answer.
I answered yes to every question, but unfortunately the phones remain in English.
Is there extra parameters different from other phones that I missed, or do those new conf phones have no extra language despite the documentation?....
Thanks !
Ch.

Similar Messages

Phone number does not display in Lync Contct Card on mobile devices

Good day for all!
I faced with strange issue with Lync Contact card on mobile devices.
We have installed Lync Server 2013 (with last CU (December 2014)) and Exchange server 2010 SP3 (Rollup 4)
All lync enabled users have filled AD attribute telephoneNumber - 4-digit internal work phone.
this work phone has shown correctly in Lync Contact card on Lync 2013 desktop client, but it does not display for some users on Lync Mobile clients (Lync for Android, Windows Phone and iOS)
May be someone have an idea why this is happening and what is going wrong for me?
Thanks in advance!
P.S. sorry for my English.
P.P.S I cannot submit screenshot with problem because "Body text cannot contain images or links until we are able to verify your account"

Hi,
It can be the issue caused by the privacy relationship.
Please check if others set the relationship for these issued users to be workgroup. If not, change it. For these issued Lync users, on their desktop client, also make sure the relationship set to be workgroup.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Report layout in french not displaying french characters properly

Hello,
I have a report layout that I have created with a 3rd party tool (j4ldesigner). All it has on it is one label (displaying a couple of french characters as a test
). Within APEX I have created a test report layout and imported it as a named column report layout type. I then created a very simple report query and associated it with the test layout. When I run the test report, the layout launches but the characters éâ appear as Ã©Ã¢.
So I'm thinking this has to do with language somehow. I have other reports which are generic named column reports, but those are manually entered and seem to work fine. The named column layout is imported, and I'm assuming some sort of conversion is happening where those special french language characters are concerned.
The fact is this is a 11.2.0.3 database. I was assuming the language set would use the standard language librariy files which come with 11G (ie $ORACLE_HOME/nls/data) so I wouldn't have an issue. Since it is not working, do I need to use the language files associated with 9idata? Or is there an init.ora parameter I am missing?

Hello,
Within APEX I have created a test report layout and imported it as a named column report layout type.Make sure the Report Layout File is in UTF-8 encoding. Most of the times, the issue is with file encoding type.
If you use text editors like [url http://notepad-plus-plus.org]notepad++ you can see and convert from one encoding to other.
Regards,
Hari

Outlook 2010 ThumbnailPhoto not displayed for local contacts

Hello,
I'm running Exchange 2010 SP2 with Outlook 2010 clients. We are running Lync 2010 and have been using the thumbnail photos for some time now. However, we've found an issue with images showing consistently in Outlook 2010 and are hoping there
is an easy fix for this.
1. The user has a smartphone and decides to search the GAL for a user from the smartphone and then "add to contacts" from there. This adds the contact to the users Outlook contacts WITHOUT the image. From this point on the user won't see that
contact's thumbnail photo in emails.
2. Lync automatically adds "frequent contacts" into the users contact folder WITHOUT the thumpnail photo. From this point on the user won't see that contact's image in emails.
3. A user who is working offline decides to copy a contact from the OAB to their local contacts. From this point on the user won't see that contact's thumbnail photo in emails.
The fix for this is to have the user delete the contacts without thumbnails from their contacts folder and then re-add them from the GAL while connected to AD (i.e. NOT from their smartphone). This isn't a great solution and I'm hoping there is an
easier way to manage this.
Thanks for your help!
--Shaun

Hi ,
In fact, we upload pictures to Active Directory using the
Import-RecipientDataProperty cmdlet. By default, thumbnailPhoto is included in the OAB as an Indicator attribute. This means the value of the attribute isn't copied to the OAB— instead, it simply
indicates the client should get the value from Active Directory. If an Outlook client (including Outlook Anywhere clients connected to Exchange using HTTPS) can access Active Directory, the thumbnail will be downloaded and displayed. When offline, no thumbnail
downloads.
And please check the if lync client chosen Default corporate picture .
The following articles for your reference.
Lync 2010, Exchange 2010, SharePoint 2010, and Office 2010 Integration: Part 1
http://blogs.technet.com/b/drrez/archive/2011/04/26/lync-2010-exchange-2010-sharepoint-2010-and-office-2010-integration-part-1.aspx
GAL Photos in Exchange 2010 and Outlook 2010:
http://blogs.technet.com/b/exchange/archive/2010/03/10/gal-photos-in-exchange-2010-and-outlook-2010.aspx
Wendy Liu
TechNet Community Support

Device phone number does not display on Blackberry

Even though the option is set to yes, display phone number, it shows on the device as unknown. The devices are on a BES. Does anyone have any thoughts on this?
Thanks
Solved!
Go to Solution.

If you go under Options | Advanced Options | SIM Card, does it show the phone number there?
Also in this screen if you hit the menu button go into Edit SIM Phone Number and type in the device's phone number. If the number still isn't showing up try resetting the device by removing the battery for 1 minute and replacing it.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Dialer not displaying incoming / outgoing contact ...

Hello Guys,
On my Lumia 920, the phone dialer will not display the name of the incoming or outgoing contacts if they are saved in international format.
So if my country code is for example +961 and X number is saved as +961-x-xxxyyy, when X calls me from x-xxx-yyy, his name is not shown !!
I keep my contacts in international format since I travel a lot but when I'm home, none of the local country number saved on my phone are recognized.
Kindly advise.
Thanks.

Hi I'm facing the same problem with my Lumia 920; the caller's name does not show when saved in international format. I never faced this issue with other phones. What's the solution? N.B. I have set my country in the regions settings and have international call assist ON

Phone numbers are not recognized in contacts when i am in roaming

Let me expain this in detail: all my contacts are saved in a format:
+country_mobile operator prefix with contact number. When in roaming and receive a phone call, phone number is not displayed at all but exists in exactly the same format as it is in my contact details. The only difference is that displayed number in roaming does not contain space after country code. I hope this can be fixed somehow!?

I agree that this is an answer for issue but the space is assigned by iOS in contacts, not myself and the phone call in roaming either from operater and software, but software must be able to match it or not to save it on contact details with space after country code.

Masking not displaying correctly

Recently upgraded system to 9.1.2. I have a couple dozen phones when dialing an outside line there phone masking is not displaying. The masking is showing up with the Bill To Number of the PRI's. I have had numerous Cisco TAC show me and tell me that when calls leaving the gateways they are leaving with all digits, and when the same call enters our gateways they are being changed to this BTN. However this literally happens every other call. The first call will show all correct 10 digit masking and the second call with have the BTN.
I spent weeks with Verizon and they added these numbers to a switch screening table so they can identify the numbers correctly coming in. After weeks waiting for them to make these changes it still does NOT work. Please any suggestions at all will help. Im at a loss in what to do. I can not find this phantom number anywhere and to the best of my knowledge this masking number that shows up is just the BTN of our PRI's.

Do you have multiple PRIs? Maybe the route list is configured for a different hunting algorithm and sending calls out a different PRI? Can you run debug isdn q931 on the gateway you think calls are going out on and see if both the calls that have the right and wrong masks go out the same gateway and you are seeing the masks correctly. If you are seeing the correct masks on both calls, then its a provider issue.

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7

Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

How do I download a movie to my phone? when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'. I have activated icloud, but this has not helped.

How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.

I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

100% Width Slideshow Not Displaying Images Correctly In Phone Version...

Hi all... Again.
2nd issue encountered tonight since working on the mobile version of my current project. Having copied, pasted and resized the 100% width slideshow from the homepage of my Desktop version to my Phone version and after having applied different resolution images and published successfully, I made some edits to a different page (the main "About" page, nothing to do with the Homepage) and published only to find that the images in the slideshow are now not displaying correctly...
After the first (of eight) image, it seems to skip the next one entirely and apply the text for the 2nd image to the 3rd image, the text for the 3rd image to the 4th image and so on... Additional to that, it seems to also randomly use the Desktop resolution images for four of the images... WHY?!
I made NO changes to the slideshow since the last publish so WHY has it changed?
I've tried re-applying the correct images and re-uploading; no change. I've tried doing a full-upload; no change. I've tried closing down Muse and trying again; no change. My only option left really is to either update to the October 27th edition of Muse (which I was deliberately holding off on, until I completed this project, which aside from the mobile version is done!), or to revert back to the previous version of Muse in the hopes either of these will resolve the issue. Only problem with that is I've started using the text sync features and the new contact form features (such as ReCaptcha, which is a pain in and of itself if you want to use two forms on one page!! Heaven forbid!)... So I'd really rather not have to revert back but I also don't really want to risk screwing anything up further with the latest update, as has happened on more than one occasion for me when in the middle - or near the end - of projects!
Is anyone else encountering this? Anyone able to replicate it? Anyone know how to fix it? I'm really reluctant to continue on with the Phone version of this project until I know I won't keep encountering this sort of thing...
Any help would be appreciated.
Thanks.

In the words of Gomer Pyle, "Well Golly!"
Thanks. lol

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Why is the map not displaying correctly on "find my phone" I am getting large grid squares on the map

why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

Conf Phone 8831 do not display french locale...

Similar Messages

Maybe you are looking for