CONF21 Inbound Idoc - How to Monitor the Error

I have just set up the idoc conf21 - and everything works perfectly well (I ticked "immediate update" via CI41 in order to avoid using CIP2).
I have simulated an error in the ILE01 unit of measurement I putted 'XXX'.
I launched the idoc via we19 and the idoc appears in status 53 green. ( This is normal because the status 53 represents only the fact that function module KK2A_GET_DATA_FROM_IDOC has runned without errors. It does not report errors possibly occuring in PROCESS_CC2_MESSAGES_PARALLEL.)
Obviously due to the 'XXX' the confirmation did not happen. The record disappeared from the table RUECK.
Question : How can I monitor this type of error ?
Thanks
Philippe

Go to CO16
reprocess - change the *** in unit of measurement to H
back - the line shoulb be green now
save
and up this is it !

Similar Messages

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

How to rectify the errors through call transaction metod in bdc

how to rectify the errors through call transaction metod in bdc

Hi ,
View the highlited part of the below code.
REPORT ygfrivat1 NO STANDARD PAGE HEADING
                 LINE-SIZE 165
                 MESSAGE-ID yif_groc.
Program     YGFRIVAT1
Function    Report to Upload the VAT Adjustment File.
Author      ARENAPU
Date        11.05.2007
PMTS        AM12810157
Transport   G6DK937834
Description:
Modification log:
1. Changed by :
   Changed on :
   PMTS        :
   Transport   :
   Tag         :
   Description :
       T A B L E S   D E C L A R A T I O N S
TABLES: edidc, "Control record (IDoc)
        edids, "Status Record (IDoc)
        t001w.
Internal Tables Declaration.
Internal table to hold data from table EDIDS
DATA: BEGIN OF t_edids OCCURS 0,
       docnum LIKE edids-docnum,
       logdat LIKE edids-logdat,
       logtim LIKE edids-logtim,
       countr LIKE edids-countr,
       credat LIKE edids-credat,
       uname LIKE edids-uname,
      END OF t_edids,
Internal table to hold data from table EDIDC
      BEGIN OF t_edidc OCCURS 0,
       docnum LIKE edidc-docnum,
       rcvprt LIKE edidc-rcvprt,
       rcvprn LIKE edidc-rcvprn,
       credat LIKE edidc-credat,
      END OF t_edidc,
Internal table to hold data from upload file
      BEGIN OF t_tab OCCURS 0,
       cust(10),        "site/customer number
       date(10),        "transaction date
       currency(04),    "currency
       extnbr(15),      "external reference number
       pos-cont(05),    "POS controler
       pos-id(25),      "POS id
       cashier(10),     "cashier name
       qualif(04),      "qualifier of the article
       matnr(25),       "article number
       qty(10),         "quantity
       sale(16),        "sale value
       pos-tr(04),      "POS transfert type
       paymeth(04),     "payment method
       final(35),       "final price
       tarcur(04),      "target currency
       assign(35),      "assignment day
       error,
      END OF t_tab,
Internal table for Report display.
      BEGIN OF t_tab1 OCCURS 0,
       cust(10),                    "site/customer number
       date(10),                    "transaction date
       currency(04),                "currency
       extnbr(15),                  "external reference number
       pos-cont(05),                "POS controler
       pos-id(25),                  "POS id
       cashier(10),                 "cashier name
       qualif(04),                  "qualifier of the article
       matnr(25),                   "article number
       qty(16)   TYPE p DECIMALS 2, "quantity
       sale(16) TYPE p DECIMALS 2, "sale value
       pos-tr(04),                  "POS transfert type
       paymeth(04),                 "payment method
       final(16) TYPE p DECIMALS 2, "final price
       tarcur(04),                  "target currency
       assign(35),                  "assignment day
      END OF t_tab1,
      t_tab_temp LIKE t_tab OCCURS 0 WITH HEADER LINE,
Internal table to Validate Customer no.
      BEGIN OF t_check OCCURS 0,
       werks LIKE t001w-werks,
       vkorg LIKE t001w-vkorg,
       value(40),
      END OF t_check,
      t_check_temp LIKE t_check OCCURS 0 WITH HEADER LINE.
Internal table to hold data from table ZCS_PARAM.
DATA: BEGIN OF t_zcs_param OCCURS 0.
        INCLUDE STRUCTURE zcs_param.
DATA: vkorg LIKE t001w-vkorg,
      END OF t_zcs_param.
*Internal table to hold Messages.
DATA: BEGIN OF t_message OCCURS 0,
         msgnum TYPE msgnum,
         msgtyp TYPE msgtyp,
         msgtxt TYPE msgtext,
       END OF t_message.
*Work area for table t_message
DATA : w_message LIKE LINE OF t_message.
Internal table to hold BDC data
DATA: t_bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE,
Internal table to collect error messages
      messtab   LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
*Internal table to hold messages from call transaction
DATA: BEGIN OF t_text OCCURS 0,
       desc(150),
       msgtxt(100),
      END OF t_text.
       D A T A   D E C L A R A T I O N S
DATA: n TYPE i,
      gv_status(11) TYPE c, "Shows status, Production or Test
      gv_exit TYPE c, "Exit Flag
      gv_qty(16)   TYPE p DECIMALS 2, "Variable to sum Quantity
      gv_sale(16) TYPE p DECIMALS 2, "Variable to sum Amount
      gv_final(16) TYPE p DECIMALS 2. "Variable to sum Final Amount
DATA: w_text(100),
      gv_mode TYPE c,
      error TYPE c. "Flag to Indicate error.
CONSTANSTS DECLARATION
CONSTANTS : gc_fieldname LIKE dynpread-fieldname VALUE 'P_FNAME',
            gc_seq_no LIKE zcs_param-seq_no VALUE '00110',
            gc_object LIKE zcs_param-object VALUE 'YGFVAT',
            gc_paraname LIKE zcs_param-paraname VALUE 'VKORG',
            gc_back TYPE c VALUE 'N',
            gc_error TYPE c VALUE 'E',
            gc_all TYPE c VALUE 'A'.
           S E L E C T I O N   S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
PARAMETERS : p_fname LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-002 FOR FIELD p_test.
PARAMETERS : p_test AS CHECKBOX.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK a2 WITH FRAME TITLE text-006.
PARAMETERS : rb_back RADIOBUTTON GROUP rb1 DEFAULT 'X',
             rb_error RADIOBUTTON GROUP rb1,
             rb_all RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF BLOCK a2.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
*Subroutine to provide F4 help for file name
PERFORM fr_get_filename.
       I N I T I A L I Z A T I O N
INITIALIZATION.
*Subroutine to check authorization.
PERFORM fr_authority_check.
        T O P - O F - P A G E
TOP-OF-PAGE.
*Subroutine to diplay header
PERFORM fr_display_header.
         S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
*Subroutine to upload data from presentation server.
PERFORM fr_upload_data.
*Subroutine to validate records from uploaded file.
PERFORM fr_validate_data.
*Subroutine to build report internal table.
PERFORM fr_build_rep.
         E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Subroutine to display report.
PERFORM fr_write_report.
        F O R M   S U B R O U T I N E S
*&      Form fr_get_filename
      text
FORM fr_get_filename.
DATA : lv_repid LIKE sy-repid,         " Report id
         lv_file LIKE ibipparms-path.   " File Path
lv_repid = sy-repid.
F4 help for file path.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = lv_repid
            dynpro_number = syst-dynnr
            field_name    = gc_fieldname                    " p_fname1
       IMPORTING
            file_name     = lv_file.
IF NOT lv_file EQ space.
    p_fname = lv_file.
ELSE.
    MESSAGE e999 WITH 'Invalid Path'(005).
ENDIF.
ENDFORM.                    " fr_get_filename
*&      Form fr_upload_data
      text
FORM fr_upload_data.
DATA: lv_fname TYPE string.
CLEAR lv_fname.
lv_fname = p_fname.
Uploading file from PC or presentation server to internal table.
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            filename            = lv_fname
            filetype            = 'ASC'
            has_field_separator = 'X'
       TABLES
            data_tab            = t_tab
       EXCEPTIONS
            file_open_error     = 1.
IF sy-subrc <> 0.
    DESCRIBE TABLE t_message LINES n.
    w_message-msgnum = n + 1.
    w_message-msgtyp = 'E'.
    MOVE text-m01 TO w_message-msgtxt.
    APPEND w_message TO t_message.
Subroutine for writing log.
    PERFORM fr_write_log.
ENDIF.
ENDFORM.                    " fr_upload_data
*&      Form fr_validate_data
      text
FORM fr_validate_data.
DATA : lv_lines1 TYPE i,
         lv_lines2 TYPE i.
*Obtain Status depending on Check box selected.
IF p_test IS INITIAL.
    gv_status = 'PRODUCTION'.
ELSE.
    gv_status = 'TEST RUN'.
ENDIF.
*Batch Mode
CLEAR gv_mode.
IF rb_back EQ 'X'.          "No Display
    MOVE gc_back TO gv_mode.
ELSEIF rb_error EQ 'X'.     "Error Only
    MOVE gc_error TO gv_mode.
ELSEIF rb_all EQ 'X'.       "All Screens
    MOVE gc_all TO gv_mode.
ENDIF.
IF NOT t_tab[] IS INITIAL.
    SORT t_tab BY cust.
    REFRESH t_tab_temp.
    t_tab_temp[] = t_tab[].
    SORT t_tab_temp BY cust.
    DELETE ADJACENT DUPLICATES FROM t_tab_temp COMPARING cust.
    IF NOT t_tab_temp[] IS INITIAL.
      SELECT werks vkorg FROM t001w
                         INTO TABLE t_check
                         FOR ALL ENTRIES IN t_tab_temp
                         WHERE werks = t_tab_temp-cust+0(4).
      IF sy-subrc = 0.
        SORT t_check BY werks.
      ENDIF.
      LOOP AT t_check.
        IF t_check-vkorg <> ' '.
          MOVE t_check-vkorg TO t_check-value.
          MODIFY t_check TRANSPORTING value.
        ENDIF.
      ENDLOOP.
    ENDIF.
    FREE t_tab_temp.
ENDIF.
IF NOT t_check[] IS INITIAL.
    REFRESH t_check_temp.
    t_check_temp[] = t_check[].
    SORT t_check_temp BY value.
    DELETE ADJACENT DUPLICATES FROM t_check_temp COMPARING value.
    IF NOT t_check_temp[] IS INITIAL.
      SELECT * FROM zcs_param INTO TABLE t_zcs_param
               FOR ALL ENTRIES IN t_check_temp
               WHERE seq_no   EQ gc_seq_no
                 AND object   EQ gc_object
                 AND paraname EQ gc_paraname
                 AND value    EQ t_check_temp-value.
      IF sy-subrc = 0.
        SORT t_zcs_param BY value.
      ENDIF.
    ENDIF.
    FREE t_check_temp.
ENDIF.
IF NOT t_tab[] IS INITIAL.
    LOOP AT t_tab.
      READ TABLE t_check WITH KEY werks = t_tab-cust BINARY SEARCH.
      IF sy-subrc <> 0.
        MOVE 'X' TO t_tab-error.
        MODIFY t_tab TRANSPORTING error.
        DESCRIBE TABLE t_message LINES n.
        w_message-msgnum = n + 1.
        w_message-msgtyp = 'E'.
        CONCATENATE t_tab-cust text-030
        INTO w_message-msgtxt SEPARATED BY space.
        APPEND w_message TO t_message.
Subroutine for writing log.
        PERFORM fr_write_log.
        EXIT.
      ELSE.
        READ TABLE t_zcs_param WITH KEY value = t_check-vkorg
                                                     BINARY SEARCH.
        IF sy-subrc <> 0.
          MOVE 'X' TO t_tab-error.
          MODIFY t_tab TRANSPORTING error.
          DESCRIBE TABLE t_message LINES n.
          w_message-msgnum = n + 1.
          w_message-msgtyp = 'E'.
          CONCATENATE text-003 t_tab-cust text-004 t_check-vkorg
          INTO w_message-msgtxt SEPARATED BY space.
          APPEND w_message TO t_message.
Subroutine for writing log.
          PERFORM fr_write_log.
          EXIT.
        ELSE.
          PERFORM fr_format_tab.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
DESCRIBE TABLE t_tab LINES lv_lines1.
IF lv_lines1 <> 0.
    DELETE t_tab WHERE error EQ 'X'.
ENDIF.
DESCRIBE TABLE t_tab LINES lv_lines2.
IF lv_lines2 <> 0.
    IF lv_lines2 <> lv_lines1.
      EXIT.
    ELSE.
      IF p_test IS INITIAL.
        LOOP AT t_tab.
*Subroutine to build BDC table
          PERFORM fr_fill_bdctab.
*Subroutine to Post Data into SAP.
          PERFORM fr_data_posting.
        ENDLOOP.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " fr_validate_data
*&      Form fr_write_log
      text
FORM fr_write_log.
CLEAR error.
error = 'X'.
WRITE:/1 'Msg No'(027), 10 'Type'(028), 20 'Text'(029).
ULINE:/1(120).
FORMAT RESET.
LOOP AT t_message.
    IF t_message-msgtyp = 'E'.
      FORMAT COLOR 6 INTENSIFIED .
    ELSEIF t_message-msgtyp = 'W'.
      FORMAT COLOR 3 INTENSIFIED .
    ELSEIF t_message-msgtyp = 'I'.
      FORMAT COLOR 5 INTENSIFIED .
    ENDIF.
    WRITE:/1 t_message-msgnum,
          10 t_message-msgtyp,
          20 t_message-msgtxt.
    FORMAT RESET.
ENDLOOP.
ULINE:/1(120).
ENDFORM.                    " fr_write_log
*&      Form fr_write_report
      text
FORM fr_write_report.
CLEAR gv_exit.
LOOP AT t_message.
    IF t_message-msgtyp = 'E'.
      gv_exit = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
IF NOT gv_exit IS INITIAL.
    EXIT.
ELSE.
    PERFORM fr_display_report.
    IF NOT t_text[] IS INITIAL.
Subroutine for Display Call Transaction messages.
      PERFORM fr_write_msg.
    ENDIF.
ENDIF.
ENDFORM.                    " fr_write_report
*&      Form fr_display_report
      text
FORM fr_display_report.
IF NOT t_tab1[] IS INITIAL.
    CLEAR: gv_qty, gv_sale, gv_final.
    LOOP AT t_tab1.
      WRITE:/1(10) t_tab1-cust,
            13(10) t_tab1-date,
            25(05) t_tab1-currency,
            32(14) t_tab1-extnbr,
            48(09) t_tab1-pos-cont,
            60(18) t_tab1-matnr,
            80(16) t_tab1-qty RIGHT-JUSTIFIED ,
            98(16) t_tab1-sale RIGHT-JUSTIFIED ,
           116(07) t_tab1-paymeth,
           125(16) t_tab1-final RIGHT-JUSTIFIED,
           143(06) t_tab1-tarcur,
           152(12) t_tab1-assign.
      gv_qty   = t_tab1-qty   + gv_qty.
      gv_sale = t_tab1-sale + gv_sale.
      gv_final = t_tab1-final + gv_final.
    ENDLOOP.
    FORMAT COLOR 3.
    ULINE: /(164).
    WRITE:/ 'TOTALS',
      80(16) gv_qty RIGHT-JUSTIFIED,
      98(16) gv_sale RIGHT-JUSTIFIED,
     125(16) gv_final RIGHT-JUSTIFIED,
     182 ''.
    ULINE: /(164).
    FORMAT RESET.
ENDIF.
ENDFORM.                    " fr_display_report
*&      Form FR_DISPLAY_HEADER
      text
FORM fr_display_header.
IF error IS INITIAL.
    FORMAT COLOR 1.
    WRITE:/ 'Date upload           :'(007),   25 sy-datum, 38 ''.
    WRITE:/ 'Production or Test Run:'(008),   25 gv_status, 38 ''.
    WRITE:/ 'Upload User Logon     :'(009),   25 sy-uname, 38 ''.
    ULINE: /(164).
    WRITE:/1(04) 'Site'(010),
          13(10) 'Date'(011),
          25(05) 'Curr.'(012),
          32(14) 'Receipt'(013),
          48(09) 'Cashier'(014),
          60(18) 'Article'(015),
          92     'Qty'(016),
          102    'Item Amount'(017),
          116(7) 'M.o.P.'(018),
          128    'Tender Amount'(019),
          143(6) 'T.Curr'(020),
         152(12) 'Assignment'(021).
    ULINE:/(164).
    FORMAT RESET.
ENDIF.
ENDFORM.                    " FR_DISPLAY_HEADER
*&      Form fr_newdynpro
      text
FORM fr_newdynpro USING program LIKE bdcdata-program
                        dynpro LIKE bdcdata-dynpro.
t_bdcdata-program = program .
t_bdcdata-dynpro = dynpro.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " fr_newdynpro
*&      Form fr_loadfield
      text
FORM fr_loadfield USING field LIKE bdcdata-fnam
                        value.
t_bdcdata-fnam = field.
t_bdcdata-fval = value.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " fr_loadfield
*&      Form fr_fill_bdctab
      text
FORM fr_fill_bdctab.
REFRESH t_bdcdata.
PERFORM fr_newdynpro USING 'SAPMWPUK' '100'.
PERFORM fr_loadfield USING 'G_FILIALE' t_tab-cust.
PERFORM fr_loadfield USING 'G_DATUM'   t_tab-date.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BON'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '500'.
PERFORM fr_loadfield USING 'WPSCB01-POSKREIS'   t_tab-pos-cont.
PERFORM fr_loadfield USING 'WPSCB01-KASSID'     t_tab-pos-id.
PERFORM fr_loadfield USING 'WPSCB01-BELEGWAERS' t_tab-currency.
PERFORM fr_loadfield USING 'WPSCB01-CSHNAME'    t_tab-cashier.
PERFORM fr_loadfield USING 'WPSCB01-BONNUMMER' t_tab-extnbr.
PERFORM fr_loadfield USING 'E1WPB02-QUALARTNR(01)' t_tab-qualif.
PERFORM fr_loadfield USING 'E1WPB02-ARTNR(01)'      t_tab-matnr.
PERFORM fr_loadfield USING 'E1WPB02-MENGE(01)'      t_tab-qty.
PERFORM fr_loadfield USING 'WPSCB03-KONDVALUE(01)' t_tab-sale.
PERFORM fr_loadfield USING 'E1WPB02-VORGANGART(01)' t_tab-pos-tr.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'ZAHL'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '530'.
PERFORM fr_loadfield USING 'WPSCB06-ZAHLART' t_tab-paymeth.
PERFORM fr_loadfield USING 'WPSCB06-SUMME'    t_tab-final.
PERFORM fr_loadfield USING 'WPSCB06-WAEHRUNG' t_tab-tarcur.
PERFORM fr_loadfield USING 'WPSCB06-ZUONR'    t_tab-assign.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'SAVE'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '530'.
PERFORM fr_loadfield USING 'WPSCB06-ZAHLART' t_tab-paymeth.
PERFORM fr_loadfield USING 'WPSCB06-SUMME'    t_tab-final.
PERFORM fr_loadfield USING 'WPSCB06-WAEHRUNG' t_tab-tarcur.
PERFORM fr_loadfield USING 'WPSCB06-ZUONR'    t_tab-assign.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BACK'.
PERFORM fr_newdynpro USING 'SAPLSPO1' '0200'.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'YES'.
PERFORM fr_newdynpro USING 'SAPMWPUK' '100'.
PERFORM fr_loadfield USING 'G_FILIALE' t_tab-cust.
PERFORM fr_loadfield USING 'G_DATUM'   t_tab-date.
PERFORM fr_loadfield USING 'BDC_OKCODE' 'BACK'.
ENDFORM.                    " fr_fill_bdctab
*&      Form fr_data_posting
      text
FORM fr_data_posting.
IF NOT t_bdcdata[] IS INITIAL.
    REFRESH messtab.
    CALL TRANSACTION 'WPUK' USING t_bdcdata
                            MODE gv_mode
                            UPDATE 'S'
                            MESSAGES INTO messtab.
    IF sy-subrc = 0 .
      CLEAR w_text.
      LOOP AT messtab.
        CALL FUNCTION 'FORMAT_MESSAGE'
             EXPORTING
                  id        = messtab-msgid
                  lang      = sy-langu
                  no        = messtab-msgnr
                  v1        = messtab-msgv1
                  v2        = messtab-msgv2
                  v3        = messtab-msgv3
                  v4        = messtab-msgv4
             IMPORTING
                  msg       = w_text
             EXCEPTIONS
                  not_found = 1
                  OTHERS    = 2.
        MOVE w_text TO t_text-msgtxt.
        CONCATENATE 'Site:'(031)    t_tab-cust
                    'Article:'(024) t_tab-matnr
                    'Posted Sucessfully'(032)
          INTO t_text-desc SEPARATED BY space.
        APPEND t_text.
        CLEAR t_text.
      ENDLOOP.
    ELSE.
      CLEAR w_text.
      LOOP AT messtab.
        CALL FUNCTION 'FORMAT_MESSAGE'
             EXPORTING
                  id        = messtab-msgid
                  lang      = sy-langu
                  no        = messtab-msgnr
                  v1        = messtab-msgv1
                  v2        = messtab-msgv2
                  v3        = messtab-msgv3
                  v4        = messtab-msgv4
             IMPORTING
                  msg       = w_text
             EXCEPTIONS
                  not_found = 1
                  OTHERS    = 2.
        MOVE w_text TO t_text-msgtxt.
        IF messtab-msgnr EQ '213'.
          CONCATENATE 'Site:'(031)    t_tab-cust
                      'Article:'(024) t_tab-matnr
                      'Posted Sucessfully'(032)
           INTO t_text-desc SEPARATED BY space.
          APPEND t_text.
          CLEAR t_text.
          EXIT.        ELSE.
          CONCATENATE 'Site:'(031)    t_tab-cust
                      'Article:'(024) t_tab-matnr
                      'Not Posted'(033)
           INTO t_text-desc SEPARATED BY space.
          APPEND t_text.
          CLEAR t_text.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDFORM.                    " fr_data_posting
*&      Form fr_authority_check
      text
FORM fr_authority_check.
AUTHORITY-CHECK OBJECT 'Y_VATADJ'
           ID 'VKORG' FIELD t001w-vkorg
           ID 'TCD'   FIELD 'YGFVAT'.
IF sy-subrc NE 0.
    MESSAGE e999 WITH text-m02.
ENDIF.
ENDFORM.                    " fr_authority_check
*&      Form fr_write_msg
      text
FORM fr_write_msg.
SKIP.
ULINE:/(164).
WRITE:/
'Messages encountered while Calling Transaction WPUK'(025),
      90 'Message Text'(026).
ULINE:/1(164).
LOOP AT t_text.
    WRITE:/1 t_text-desc,
          90 t_text-msgtxt,
          164 ''.
ENDLOOP.
ULINE:/1(164).
ENDFORM.                    " fr_write_msg
*&      Form FR_BUILD_REP
      text
FORM fr_build_rep.
IF error IS INITIAL.
    IF NOT t_tab[] IS INITIAL.
      LOOP AT t_tab.
        MOVE:
          t_tab-cust     TO t_tab1-cust,        "site/customer number
          t_tab-date     TO t_tab1-date,        "transaction date
          t_tab-currency TO t_tab1-currency,    "currency
        t_tab-extnbr   TO t_tab1-extnbr,      "external reference number
          t_tab-pos-cont TO t_tab1-pos-cont,    "POS controler
          t_tab-pos-id   TO t_tab1-pos-id,      "POS id
          t_tab-cashier TO t_tab1-cashier,     "cashier name
         t_tab-qualif   TO t_tab1-qualif,      "qualifier of the article
          t_tab-matnr    TO t_tab1-matnr,       "article number
          t_tab-pos-tr   TO t_tab1-pos-tr,      "POS transfert type
          t_tab-paymeth TO t_tab1-paymeth,     "payment method
          t_tab-tarcur   TO t_tab1-tarcur,      "target currency
          t_tab-assign   TO t_tab1-assign.
        REPLACE ',' WITH '.' INTO t_tab-qty.
        CONDENSE t_tab-qty NO-GAPS.
        MOVE t_tab-qty TO t_tab1-qty.
        REPLACE ',' WITH '.' INTO t_tab-sale.
        CONDENSE t_tab-sale NO-GAPS.
        MOVE t_tab-sale TO t_tab1-sale.
        REPLACE ',' WITH '.' INTO t_tab-final.
        CONDENSE t_tab-final NO-GAPS.
        MOVE t_tab-final TO t_tab1-final.
        APPEND t_tab1.
        CLEAR t_tab1.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDFORM.                    " FR_BUILD_REP
*&      Form fr_format_tab
      text
FORM fr_format_tab.
DATA : lv_qty TYPE string.
IF NOT t_tab-qty IS INITIAL.
    IF t_tab-qty+0(1) EQ '-'.
      CLEAR lv_qty.
      MOVE t_tab-qty TO lv_qty.
      CLEAR t_tab-qty.
      SHIFT lv_qty LEFT CIRCULAR.
      CONDENSE lv_qty NO-GAPS.
      MOVE lv_qty TO t_tab-qty.
      MODIFY t_tab TRANSPORTING qty.
    ENDIF.
ENDIF.
ENDFORM.                    " fr_format_tab

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How i fix the error 1015 for my iphone3g coz my phone i opining

how i fix the error 1015 for my iphone3g coz my phone i opining and also i can use since i face that problem

Yes, if it has been jailbroken, then there is probably nothing that you can do and you will never be able to use it, so ditch it and buy a new phone.
If it's an iPhone 3g, then it is a very old phone anyway and you shoud consider buying a new one.

How to handle the #error in ssrs expression

hi
Please any one help me to resolve this #error ,
I have a calculated filed in that expression i given a if condition like below
data of column is coming like this 0 , 0.0
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/( Fields!Column1.Value)))
how to handle the #error
Please let me know any one

Hi deepuk23,
According to your description, when you use the IIF() function in the report you got some error,right?
The issue can be caused by the column1 and column2 have different datatype, I assumed that one is integer and another is float, when the Column1 is 0 or null, because IIF() function always evaluates both the true part and the false part, even
though it returns only one of them, it will throw out the error.
To resolve the issue, you should use a nested IIF() function to avoid the zero-divisor in any rate like below:
=IIF(Fields!Column1.Value=0,0,((Fields!Column2.Value - Fields!Column1.Value)/(IIF(Fields!Column1.Value=0,1,Fields!Column1.Value))))
For more information, please refer to this article:
FAQ: Why does the “Attempted to divide by zero” error still happen?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

how to fix the error message itunes can't sync apps because it can't determine what apps are installed

Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567

How to rectify the error message " duplicate data records found"

Hi,
How to rectify the error "duplicate data records found" , PSA is not there.
and give me brief description about RSRV
Thanks in advance,
Ravi Alakunlta

Hi Ravi,
In the Info Package screen...Processing tab...check the option Do not allow Duplicate records.
RSRV is used for Repair and Analysis purpose.
If you found Duplicate records in the F fact table...Compress it then Duplicate records will be summarized in the Cube.
Hope this helps.

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to rectify the errors in master data loads & transactional data loads?

hy,
please any one tell me
How to rectify the errors in master data loads & transactional data loads?
thnQ
Ravi

Hi,
Please post specific questions in the forum.
Please explain the error you are getting.
-Vikram

How to monitor the database growth?

Dear All,
How to monitor the database growth in SAP.
Is there any t.code available to check the same.
advance thanks,
Sundar C
Note: suitable answers will get maximum reward points.

Hai,
You can check the database growth using tcode -db02.
and also use tcode-db02old(if the SAP is Netweaver2004s version) and click on space statistics for monitoring the datbase growth,
Thanks and Regards,

How to catch the error code thrown by Oracle client installation?

Hi everyone,
Recently, I'm writing a bat file to install Oracle 11g client for windows, I know the command line should be below, but how to find the error code it return? like the command line I want to run in Windows, the errorlevel will return 0 if the command line is pass, otherwise it will return no-zero:
oui.exe -silent -waitforcompletion -nowait -force -responseFile ...\response\clientruntime.rsp
BTW, I know I can find the error info under the path ...\Oracle\Inventory\logs, but I think it is better if you can tell me another way to catch the error in command line. I just wish that I can determine whether the Oracle provider installation is pass......
Thanks
Lindsay
Edited by: lindsaywang on Oct 6, 2008 1:28 PM

I got it.
Thanks,
TD

Inbound idoc fdccp02 to populate the data into segments

hello,
can anybody send me sample data populating to inbound idoc fidccp02.
thanks
Anant

check the below test data that I've used in my project.
E1FIKPF
BUKRS     1000
BLART     DT
BLDAT     20080908
BUDAT     20080908
WWERT     20080908
BKTXT     2205/033/01W
WAERS     GBP
GLVOR     RFBU
E1FISEG
BUZEI     001
BSCHL     01
KOART     D
SHKZG     S
WRBTR     280.00
SGTXT     Q8/Pace
E1FINBU
KUNNR     KU0002
E1FISEG
BUZEI     002
BSCHL     50
KOART     S
SHKZG     H
MWSKZ     A0
WRBTR     280.00
SGTXT     Effluent Charge
KOSTL     L6111
HKONT     0000321030
PRCTR     L6111
PRCTR     L6111

CONF21 Inbound Idoc - How to Monitor the Error

Similar Messages

Maybe you are looking for