Conference layout control with EX60/MX200

Hi all, I'm experiencing some difficult controlling conference layout when using MX200 and EX60s. The user guide demonstrates being able to change the conference layout from the touch pad however I can seem to find this function, is it possible some configuration I’m missing on the endpoint / CUCM / MCU?
I’m using TC7.1.4 on the endpoint, CUCM 9.1.2 and a MCU5320.
I’m also experiencing problems when trying to add video calls in conferences using 9951 with the USB camera. Some participant lose video other lose audio.
Any advice would be gratefully received.
Regards,
Rob

If you have it enabled on your MCU, you should be able to adjust the conference layout using FECC or DTMF.
As per the MCU documentation in the "Changing Layout" section:
Press * to show the in call menu
Press 1. My actions
Press 5. Change layout
Press 2 Next layout view or 8. Previous layout view (repeatedly) to cycle through the available layouts until you find the one that is suitable.  On this menu you can also select which participant occupies the biggest portion og the display.
Wait for the in call menu to hid itself or press 000 to hide it immediately.
I've just tried it here on a 4220 and a 5320 and it works fine from my EX90.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Similar Messages

  • IPhone how to layout controls with a setFrame resize

    In the interface builder there are various settings for "Mode" under "View" category.
    I have a UIScrollView with 5 controls on it like so:
    [UIButton1] [UIButton2]
    [UITableView1]
    [UIButton3][UiButton4]
    What I would like to be able to do is to adjust the UIScrollView size, and have the contents lay out properly with the top buttons at the top, bottom buttons at the bottom, and the table view sizing to take up the middle.
    I just can't find a decent explanation of what the various Mode settings do for layout.
    The method I am using to adjust the scroll view is:
    myScrollView setFrame:CGRectMake(0,0,320,480)
    or
    myScrollView setFrame:CGRectMake(0,0,320,440)

    Your observation is correct, MochaVNC is for local network only
    See Teamviewer for remote control across the internet
    http://www.teamviewer.com/en/index.aspx

  • How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

    Hi All,
    I am using checkbox as an ItemRenderer in spark list.
    I have a query.
    how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
    how to retrieve the selected item label?
    Thank you in advance.

    Hi there, I'll tweak your code a little bit to something like this:
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                    layout="vertical">
        <mx:Script>
            <![CDATA[
                 import mx.events.ListEvent;
                 import mx.controls.CheckBox;
               [Bindable]
               private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
                private function onChange(e:ListEvent):void
                   if(CheckBox(e.itemRenderer).selected){
                             mySelectedIndexes.addItem(e.rowIndex);
                   }else{
                                  mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));     
                   chkList.selectedIndices=mySelectedIndexes.toArray();
            ]]>
        </mx:Script>
    <mx:ArrayCollection id="collection">
            <mx:Object label="Test A"/>
            <mx:Object label="Test B"/>
            <mx:Object label="Test C"/>
            <mx:Object label="Test D"/>
            <mx:Object label="Test E"/>
            <mx:Object label="Test F"/>
            <mx:Object label="Test G"/>
        </mx:ArrayCollection>
    <mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox"  itemClick="onChange(event);" allowMultipleSelection="true"/>
    </mx:Application>

  • Customizing Layout Control

    Hi Experts,
    I want to customize layout controls. Content Management -->User Interface > Mapping>Layout Controllers.
    see the help link is: http://help.sap.com/saphelp_nw04s/helpdata/en/4e/02573d675e910fe10000000a114084/frameset.htm
    In this Five Screen area is  MenuTreeListPreviewLayoutController,  I want List in Left side, i want preview area (no flavor) in right side,  like content area in our portal. how can i do this?
    Layout control property is Java Class, Where it is deployed..
    Please help me regarding this..
    Thanks and Regards,
    Art.

    Hi detlev,
    Thanks for your reply.
    I have modifed the java class. and created layout controller and assigned that controller to customized layout set. In that I have listed the files in left side, file click shows preview in right side.
    when i am assigning the customized layout set to folder through presentation option. It showing files with context menu (not showing size, lock, modified and modifedBy because i have removed these in collection renderer), getting preview in right side. fine.. this is what i expected.
    But I have created KM Navigation iView, I have given customized layout set name in layout set property. When I Preview the iView, It showing the files and folder with context menu, and also size, lock, modified and modifiedBy.
    Why it is showing when i use the layout set in iView property? (but it is not showing when in use the same layout set through presentation) How can i solve this issue..
    Thanks and Regards,
    Art Tech

  • How to delete the row in table control with respect to one field in module pool programming?

    Hi,
    Can I know the way to delete the row in table control with respect to one field in module pool programming
    Regards
    Darshan MS

    HI,
    I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
    I have written this code,
    module USER_COMMAND_9000 input.
    DATA OK_CODE TYPE SY-UCOMM.
    OK_CODE = SY-UCOMM.
    CASE OK_CODE.
         WHEN 'DELETE'.
            LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
                APPEND LS_SOURCE TO LT_RESTORE.
                DELETE TABLE LT_SOURCE FROM LS_SOURCE.
                SOURCE-LINES = SOURCE-LINES - 1.
            ENDLOOP.
    But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
    So I thought of doing with respect to the field.

  • How Do You Populate A Spark List Control With An Array?

    Hello, all,
    Sorry to come accross so frustrated, but how in the name of God do you populate a Spark list control with the data in an array?  You used to be able to do this with the mx:List control, but the guys developing Flex just had to make things more difficult than they need to be!  I am more of a code purist and prefer doing things the way they have been done for decades, but apparently nothing can ever stay simple!
    I simply want to populate a list control with an array and this shouldn't be rocket science!  I found out that I must use a "collection" element, so I decided that an arrayCollection would be best.  However, after searching Adobe's documentation about arrayCollections, I am lost in a black hole of data binding, extra lines of code just to add a new element, the need to sort it, etc...!
    Here is my code:
    var pendingArray:ArrayCollection = new ArrayCollection();
    for ( var i:int = 0 ; i < queue.length ; i++ )
         var item:UserQueueItem = queue[i] as UserQueueItem ;
         if ( item.status == UserQueueItem.STATUS_PENDING )
         pendingArray.addItem({label:item.descriptor.displayName,descriptor:item.descriptor});
    Here is the relevant MXML:
    <s:VGroup>
         <s:List id="knockingList" width="110" height="100"/>              
    </s:VGroup>
    I'm not getting any errors, but the list is not populating.
    I have seen several examples where the arrayCollection is declared and populated in MXML:
            <mx:ArrayCollection id="myAC">
                <!-- Use an fx:Array tag to associate an id with the array. -->
                <fx:Array id="myArray">
                    <fx:Object label="MI" data="Lansing"/>
                    <fx:Object label="MO" data="Jefferson City"/>
                    <fx:Object label="MA" data="Boston"/>
                    etc...
               </fx:Array>
            </mx:ArrayCollection>
    That may be fine for an example, but I think this is a rare situation.  Most of the time I would image that the arrayCollection would be created and populated on the fly in ActionScript!  How can I do this?
    Thanks in advance for any help or advice anyone can give!
    Matt

    In your post it seemed like you were trying to take care of many considerations at once: optimization, design, architecture.  I would suggest you get something up and running and then worry about everything else.
    If I use data binding, then I will probably have to declare the  arrayCollection as a global variable and then I'll have to write 100 or  so extra lines of code to addItem(), removeItem(), sort(), etc...  It  just seems like too much overhead.
    I believe you may have some misconceptions about databinding in general.  You won't have to make it a global variable and you certainly won't need an extra 100 lines of code.  If you did this forum would be a very , very quiet place.
    I don't want to use data binding because the original array is refreshed  often and there is one function called by an event that re-declares the  arrayCollection each time, populates it with the array, and then sets  it as the list's dataprovider.
    That is the beauty of the ArrayCollection, it can handle the updates to its source Array. I don't know if you need to redeclare the ArrayCollection, resetting the source to the new Array allows everyone involved to keep their references so you don't have to worry about any "spooky" stuff going on.

  • Jabber and deskphone control with video

    Hi all,
    one of our clients has IM and presence 9.1 and jabber on windows 9.1.X and is integrating with Active directory for user synchronization and authentication.
    Q.
    why when we use deskphone control with jaber users have an audio in hardware phones but video in Jabber clients not working ?
    Note that the media service interface file  is installed.
    Help needed.
    Thanks in advance.

    you might want to have a look at this post 
    https://supportforums.cisco.com/thread/2160363
    =============================
    Please remember to rate useful posts, by clicking on the stars below. 
    =============================

  • Windows Phone - Cannot bind custom user controll with listview item source property

    It is Windows Phone 8.1 (runtime)
    I have some problem of binding custom user controll with list of data. I'll make it simple as I can.
    My problem is that somehow if I use DataBind {Binding Something} inside my custom controll it will not work.
    I need to transfer binded data (string) to custom controll.
    It is strange that if I do not use DataBind, it will work normally. Eg MyCustomControllParameter = "some string" (in my example 'BindingTextValue' property)
    Does anyone Know how to bind custom user controll with inside ListView with DataTemplate.
    Assume this:
    XAML Test-Main page
    <Grid  Background="Black">        <ListView x:Name="TestList" Background="#FFEAEAEA">                    <ListView.ItemTemplate>                <DataTemplate>                    <Grid Background="#FF727272">                        <local:TextBoxS BindingTextValue="{Binding Tag, FallbackValue='aSource'}" local:TextBoxS>                    </Grid>                </DataTemplate>            </ListView.ItemTemplate>        </ListView>    </Grid>
    XAML Test-Main page c#
    public sealed partial class MainPage : Page    {        List<TTag> tags = new List<TTag>();        public MainPage()        {            this.InitializeComponent();            this.NavigationCacheMode = NavigationCacheMode.Required;        }        public class TTag        {            public string Tag { get; set; }        }        private void InitializeAppData()        {            TTag tag = new TTag() { Tag = "hello world" };            tags.Add(tag);            tags.Add(tag);            tags.Add(tag);            TestList.ItemsSource = tags;        }             protected override void OnNavigatedTo(NavigationEventArgs e)        {            InitializeAppData();        }           }
    User Control XAML:
      <UserControl    x:Class="CustomControllTest.TextBoxS"    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"    xmlns:local="using:CustomControllTest"    xmlns:d="http://schemas.microsoft.com/expression/blend/2008"    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"    mc:Ignorable="d"    d:DesignHeight="300"    d:DesignWidth="400">      <Grid x:Name="LayoutRoot" Background="#FF4F4F4F"   >        <RichTextBlock x:Name="MyTestBlock">        </RichTextBlock>    </Grid></UserControl>
    User Control c#
    public TextBoxS()       {            this.InitializeComponent();            LayoutRoot.DataContext = this;        }        public static readonly DependencyProperty BindingTextValueProperty = DependencyProperty.Register(                                         "BindingTextValue",                                         typeof(string),                                         typeof(TextBoxS),                                         new PropertyMetadata(default(string)));        public string BindingTextValue        {            get            {                return GetValue(BindingTextValueProperty) as string;            }            set            {                SetValue(BindingTextValueProperty, value);                //This method adds some custom logic into RichTextBlock, pointed correctly                SetupBox(value);            }        }
    Thanks for helping ;)

    If you use a built-in control rather than your custom control, does binding work? You should verify that first.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • WP8 Map control with custom tiles

    I'm trying to display a map control in my app targeting Windows Phone 8 but I want to use custom tiles from open street map.
    I'm using this line :
    mapControl.TileSources.Add(new TileSource("http://a.tile.openstreetmap.org/{zoomLevel}/{x}/{y}.png"));
    When I launch the app the custom tiles are properly displayed, but there's still the default map tiles underneath them.
    I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.
    I would like to know how I can remove those default tiles when loading custom tiles.
    I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.

    Hi MakanWG,
    You have solved your question in here:
    http://stackoverflow.com/questions/27948331/wp8-map-control-with-custom-tiles .
    Good!
    Vote if help you

  • Can I use, and how can I use voice control with my iPad 2?

    Is it possible to use the voice control with my iPad 2? If so, how can I use it? Since there is no siri for iPad yet, I'd like to use something similar to it and I've seen this built in voice control before but I was not sure if it's possible with the iPad.

    Not yet, however you can download the new google app. This offers voice seeking on the net.

  • Layout issue with af:tree component

    I am using af:tree component but I am finding layout issue with it. I have a requirement where in I need the tree to stretch to the available space but a horizontal and a vertical scrollbar comes up automatically. Is there a way to handle this issue?

    User, without your jdev version it's hard to help.
    Have you embedded the tree component in a stretch layout?
    Timo

  • How can i distinguish two controls with the same name?

    I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
    In that web application it is possible to enter data in something looking like a list.
    There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
    Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
    When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
    In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
    Unfortunately the controls have no ID.
    Is there a way to distinguish controls with the same name?
    Thanks in advance!

    Hi Patrick Pirzer,
    >>Is there a way to distinguish controls with the same name?
    Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
    so if two controls have the same property, please use other unique property as the search property would be better.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "Source not found" Error creating URL Data control with query parameters

    Hi,
    I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
    As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
    Just dont know what could be the issue. Please help
    Thanks

    Hi,
    xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
    Frank

  • TS1382 Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

  • Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Can my iPod Classic 160GB model MB565LL version 2.0.1 Mac be controlled with my Apple Remote if it is connected to the universal dock and connected to my stereo system

    Read this Apple Support Article on Apple REMOTE
    Good luck!

Maybe you are looking for