Conference MCU 3511

Hi,
How I can create a video conference in the MCU 3511?. The MCU 3511 has been agregated than conference bridge, and his status is registered in the call manager, in the Media Resource Group has been agregated the conference bridge 3511. In the Media Resource Group List contains tha MCU. And also I had created the MeetMe number. How I star video conferencing in my thelepne IP with Video Capabilities Enable?. Which is the number the users call for initiate a video conference?

To initiate a multipoint call using an IP/VC 3540 or 3510 MCU, the endpoint dials the appropriateservice prefix followed by a conference ID. (The conference ID can be up to 9 digits long.) If a service on an MCU is 40880 for a 384-kbps call, the user might dial 4088011223, the call would be routed to the MCU using the 40880 service prefix, and the MCU would initiate an ad hoc conference with an ID of 4088011223. Users can also initiate a call and invite the other participants by dialing the conference
ID, the invite string **, and the E.164 address of the another participant.
http://cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf

Similar Messages

  • IPVC 3511 MCU with SIP : Regitration problem with LCS server

    Hello,
    We are trying to make visioConference with H323 and SIP client wuth IPVC MCU3511.
    We use IPVC MCU 3511 version 4.0.31 (i've also tested 3.5.33 it's the same) and Microsoft Live Communication Server (LCS) 2005.
    We are not able to register the 3511 MCU with the LCS server.
    The LSC server refuse the registration because the "Epid" value is not set by the 3511 MCU : the 3511 MCU receive the message "SIP/2.0 400 Epid Not Present"
    Have you any experience with the 3511 MCU and SIP ?
    Thanks for your help,
    Mickaël.
    Below an extract of the 3511MCU logs :
    Request from the MCU the the SIP server :
    16425 INFO Adap Sip |DEBUG - MSGBUILD - TransportTCPSend - TCP message Sent on Connection 2fbe27c, 5060
    16425 INFO Adap Sip |INFO - TRANSPOR - --> REGISTER sip:chu-grenoble.fr;transport=TCP SIP/2.0
    16425 INFO Adap Sip |INFO - TRANSPOR - From: <sip:[email protected]> ;tag=ac1164bf-13c4-425b9e73-2819a-4a5a
    16425 INFO Adap Sip |INFO - TRANSPOR - To: <sip:[email protected]>
    16425 INFO Adap Sip |INFO - TRANSPOR - Call-ID: ac1164bf-13c4-425b9e73-2817c-1a05
    16425 INFO Adap Sip |INFO - TRANSPOR - CSeq: 1 REGISTER
    16425 INFO Adap Sip |INFO - TRANSPOR - Via: SIP/2.0/TCP 172.17.100.191:5060 ;branch=z9hG4bK-425b9e73-2819a-448b
    16425 INFO Adap Sip |INFO - TRANSPOR - Max-Forwards: 70
    16425 INFO Adap Sip |INFO - TRANSPOR - Contact: <sip:172.17.100.191:5060;transport=UDP>
    16425 INFO Adap Sip |INFO - TRANSPOR - Expires: 3600
    16425 INFO Adap Sip |INFO - TRANSPOR - User-Agent: RADVision ViaIp MCU Vers. 3.6
    16425 INFO Adap Sip |INFO - TRANSPOR - Content-Length:0
    Response from the SIP server to the MCU :
    16426 INFO Adap Sip |DEBUG - MSGBUILD - TransportMsgBuilderTcpMakeMsg - TCP message Arrived on Connection 2fbe27c, port 5060
    16426 INFO Adap Sip |INFO - TRANSPOR - <-- SIP/2.0 400 Epid Not Present
    16426 INFO Adap Sip |INFO - TRANSPOR - Via: SIP/2.0/TCP 172.17.100.191:5060 ;branch=z9hG4bK-425b9e73-2819a-448b;ms-received-port=1027;ms-received-cid=c00
    16426 INFO Adap Sip |INFO - TRANSPOR - From: <sip:[email protected]> ;tag=ac1164bf-13c4-425b9e73-2819a-4a5a
    16426 INFO Adap Sip |INFO - TRANSPOR - To: <sip:[email protected]>;tag=BF8BA39117943996592C71550C3E1940
    16426 INFO Adap Sip |INFO - TRANSPOR - Call-ID: ac1164bf-13c4-425b9e73-2817c-1a05
    16426 INFO Adap Sip |INFO - TRANSPOR - CSeq: 1 REGISTER
    16426 INFO Adap Sip |INFO - TRANSPOR - Content-Length: 0

    Figure this out. Just need to put all the info (including SIP domain name, even if you are not running it) into via "Setup Wizard" and it will goes away.

  • IPVC-3511-MCU - Can't see all persions at the same time on conference

    Hello,
    I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
    Does IPVC-3511-MCU support multiple conference with multiple video screen?
    Regards,
    John.

    Hi -
    This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
    You did not mention the release of the 3511 software you are running. Knowing that might help too.
    Ginger

  • 3511 MCU with video Advantage

    1.DOe the 3511 MCU supports cisco Unified video advantage ( PC- USB camer based video product) for 3 or more party video conferencing ?
    2. Does the video advantge endpoint can do video conference with IP phone 7985G ?

    Answer is 'Yes' for both questions.
    You can configure 3511 to use either Skinny or H323 protocol. If configure as Skinny, then it is just another CFB in CM; CM will allocate it as per MRG and MRGL configuration. If configured as H323, then you have to configure 3511 as H323 gateway in callmanager and have a RP to point to the gateway. Typically, the RP will be your conference ID number.
    7985 is just another video phone like VTA with an IP Phone; and they do support same type of codecs. Hence you can use 7985 to do video call with VTA as well to do conference with an MCU.

  • How to create a video only conference at MCU 5320 .. ?

    How to create a video only conference at MCU 5320 .. ?

    Hi,
    This community is for Cisco Webex Meetings Server and Cisco Unified MeetingPlace products. For questions about Telepresence MCU, I would advise you post this question under Telepresence community to get a TP expert answer it.
    I hope this helps.
    -Dejan

  • How to create a audio only conference at MCU 5320 .. ?

    How to create a audio only conference at MCU 5320 .. ?

    Hi Hermanus,
    Please, post this question to Telepresence support community as this community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products and is not being observed by TP experts. Hence, you will not be able to get an answer to your questions.
    I hope this helps.
    -Dejan

  • Restricting Ad-Hoc Conferences on 4501 MCU

    Does any one know how to restrict Ad-Hoc conferences on MCU 4501 running 4.3(2.18).  I don't want just anyone to have the ability to create an Ad-Hoc conference from the Auto Attendant on the MCU.

    I don't believe so. Fundamentally there is not much difference between scheduling a conference and then joining it, as opposed to doing an ad-hoc conference on a conversation. Ad-hoc conferences have an 8 hour expiry so you can match that in your
    ConferenceScheduleInformation, along with your other settings, and then join it immediately after scheduling it.

  • MCU Ad Hoc Conference Auto-Disconnect

    Dear all,
    Is it possible to disconnect all remaning participants from a multiway-created ad hoc conference after person, who create, leave the conference?
    Scenario is a person create a multiway conference between 3 conference rooms and after a while leave conference.
    I need to auto disconnect other 2 participants.
    Is it possible?
    Used MCU : 5310 - version 4.4(3.67)
    Best Regards,
    Mesut

    Mesut,
    The only way you could do this is by associating the conference creator as the chairperson and the additional participants as guests. Distinguishing between Chairperson and Guests in multiway is not possible.
    If you add Conductor this may be possible in the next version with the use of different PINs for chairperson and guests.
    Adam

  • "Time Remaining" counter on MCU Conferences page

    Hello!
    When scheduling a conference in TMS involving a MCU, after the conference starts the remaining time as expressed in the MCU is around 15 minutes longer than what you scheduled. 
    Is this some sort of padding that TMS sends to the MCU, kind of like TMS considering an endpoint in an ad hoc call as being busy for the next 5 minutes?
    This is seen in the following combinations: TMS14.3 (beta)/MCU 4.4(3.54) & TMS13.0/MCU 4.3(2.32)
    Thanks!

    Hi Kjetil,
    If that is the case... then when will the "Audio notifications" from the MCU play indicating that the Conference is about to end in X minutes. Because as far as the MCU is concerned then the conference will only end 15mins after it is scheduled to end by the TMS. Therefore the MCU will not get a chance to play the  "Audio notifications" as the TMS will tear down the conference 15 minutes prior. Hence if we have an Audio only participant in the conference they will never hear the "Audio notifications" that the conference is scheduled to end soon.
    Below is the definition of the Audio notifications Home > Settings > Conferences from the MCU (MCU 4501) help file  
    Audio notifications
    Audio notifications Allows various audible in-conference features to be enabled or disabled.
    The options are:
    Conference timing: audible messages to indicate when the conference's scheduled end time is approaching.
    Join and leave indications: audible messages indicating when other participants join and leave the conference.
    Conference status: audible status messages for example indicating to a participant that he is the only participant in a conference.
    Regards,
    Mayank

  • 3511 MCU not booting

    I have a 3511 MCU in my lab which will not boot. I suspect it may be a hardware problem but I don't have much experience with this device.
    Here's what I get when it boots:
    ==============================================================================
    CPU : MPC755
    VxWorks Version : 5.5
    BSP version : 1.86.1D
    Created : Aug 15 2004, 17:59:05
    WDB : Not included
    ==============================================================================
    -> Boot line: motfcc(0,0)rvhost: e=10.2.30.99:FFFFFF00 g=10.2.30.254 o=±
    ViaIP MPC755_MPC8260.
    BSP version VER_2_0_1REV 1.0
    Memory Size: 128 MBytes.
    HW Version:0x3
    bspSetRoutingTable: Error in routeAdd.
    BSP_EXC: Exception hook added
    calling Pre Startup ...
    MEMORY OK (address: 0x0 - 0x3000)
    calling Main Application ...
    ==============================================================================
    The last MCU config burn operation wrong: WARNING
    Retrieved old volume params with %75 confidence:
    Volume Parameters: FAT type: FAT16, sectors per cluster 255
    255 FAT copies, 0 clusters, 65535 sectors per FAT
    Sectors reserved -1, hidden -1, FAT sectors 16711425
    Root dir entries -1, sysId (null) , serial number ffffffff
    Label:" " ...
    Disk with 512 sectors of 512 bytes will be formatted with:
    Volume Parameters: FAT type: FAT12, sectors per cluster 1
    2 FAT copies, 500 clusters, 2 sectors per FAT
    Sectors reserved 1, hidden 0, FAT sectors 4
    Root dir entries 112, sysId VXDOS12 , serial number ffffffff
    Label:" " ...
    ************* LOGGER VERSION: 1.21 *************
    Initializing RVLogger System...
    VxWorks (for ViaIP MPC755_MPC8260) version 5.5.
    Kernel: WIND version 2.6.
    Made on Aug 15 2004, 17:59:05.
    Boot line:
    motfcc(0,0)rvhost: e=10.2.30.99:FFFFFF00 g=10.2.30.254 o=±

    try the things in this article http://www.macworld.com/article/2018853/when-good-macs-go-bad-steps-to-take-when -your-mac-wont-start-up.html

  • MCU 3515 conference control

    Hi, i have an mcu 3515 12 ports, i have already configured the IP adresses of the MC and EMP..etc.
    I configured a service that use SCCP, but in the Conference control i can't use this service to create a conference. Does Conference Control of mcu support creation of SCCP conference?

    On entering the MCU web page there is an option to enter a conference id in order to view the conference details.
    This is not operational.
    Workaround:
    Log in as administrator or operator. Select the Conference Control button on the left hand side of the page. A new page with a list of the current conferences is displayed. Select the conference of choice to view the conference details.
    Try the bug - CSCsh68946

  • MCU Conference Dial out failing

    Hi Everyone
    We have a MCU 5320 running software 4.5(1.45) with TMS 14.4.1. If we schedule a conference in TMS with  hte MCU and a number of our endpoints the conference is created on the MCU but it never dials the endpoints. There's an error "Particaipants not called: awaiting DSP resource". Endpoints can call in to the meeting fine. Has anyone seen this?
    Thanks
    John

    Potentially yes, you might have to do some SIP profile and stuff but I havent seen a config readily available. This *might* get you started where you use MCU in place of the xlite.
    http://www.netcraftsmen.net/blogs/entry/sip-endpoints-in-cisco-communications-manager-call-manager-express-x-lite.html

  • MCU 4501 does not show active conference

    Hi All,
    I have MCU 4501 and it has stopped showing active conferences on auto attendant while the conference visibility is set to PUBLIC, can any one help what can be the reason

    It could be that your auto attendant is set to only show selected conferences under "Accessible scheduled conferences" in the specific auto attendant options under Conferences > Auto Attendants.
    Is it only select conferences, or all conferencing that aren't appearing?

  • MCU 4501 personalize Conference Room.

    Hi there,
    Is there any way to personalize a Conference Room, like when a participant conect to one room, instead of the default wallpaper, display a personalized one.
    The point is to have diferent wallpaper for each Conferecen Rooms.
    Software version 4.3(1.68) 
    Build 6.18(1.68)
    Thanks in advance

    It could be that your auto attendant is set to only show selected conferences under "Accessible scheduled conferences" in the specific auto attendant options under Conferences > Auto Attendants.
    Is it only select conferences, or all conferencing that aren't appearing?

  • 3640 MCU - Conferences Created via the web interface

    When a conference is created via the 3640 web interface, it will timeout in 30 minutes if no one joins the conference. Can and if so, how can you change that timeout value?

    I don't think there's an adjustment for this. You should probably call Cisco and see.

Maybe you are looking for

  • Data Federator - BO Universe

    Hi All, Can anyone please explain me the benefit of using Data Federator as a connector between BO universe and BW system? Apart from getting the live data from the BW systems, does the Data Federator has any advantage? Thanks in advance.

  • A query with respect to creation of the  shared Objects.

    Hi , I am having a query with respect to creation of the  shared Objects. I have seen a example where the Author is creatining Shared Object as shown below : SharedObj = null; sharedObj = SharedObject.getLocal("myTasks"); and there is nothing related

  • How to update a text file?

    I am doing an assignment about a bank account. A text file stores the accounts. Account Text file: User1|Password1|Balance1 User2|Password2|Balance2 When user wants to deposit or withdraw the account, then how can update the balance. The problem is t

  • HP 1810G-8 vlan tagged port

    Hello, friends! I have some issue on HP ProCurve 1810G. My HP switch is uplinked to Netgear GSM7248 6 port. Some machine1 is connected to Netgear untagged port with PVID 11. I needed machine2 connected to HP to get reachable from machine1. So, on HP

  • N95 Problem

    Hello people, i have encountered recently a problem with my N95, like 1 month ago suddenly the "menu" button stopped working...i thought the button itself had a problem...so i kept pressing it over and over and after few hours i could hear the button