Conference Phone 8831 with 7.1(3)

Hi,
Is there anyway to add Conference Phone 8831 to CUCM 7.1.3?
in datasheets it is only for CUCM 7.1.5+,

It depends on what CUCM you running whether it is restricted or unrestricted, you can find it with the help of below link. If CUCM is installed as restricted then you must go for restricted version (UCSInstall_UCOS_7.1.5.35901-1.sgn.iso) only.
https://supportforums.cisco.com/discussion/12079741/how-find-installed-cucm-iso-restricted-or-unrestricted
If you plan well, then it is not a difficult activity its like device pack installation just you need to switch the version after new iso installation and you dont need to reconfigure anything except frimware; if you dont want to update the firmwares then you can revert back the firmware names in device default.
Suresh

Similar Messages

How to cancel conference phone 8831 linked mode

I used two conference phones 8831 to setup linked mode in one big meeting room for testing last month.
Now I installed one of them in another small meeting for testing.
the keypad unit screen show me that it trying to config link mode.
I tried to erase the phone setting, but it still occurred....
Does anyone can tell me how to fix this problem? thanks.

Hi Alex,
Please move this to IP telephony Community to get experts in 8831 phones to help you. This community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products.
Kind regards,
-Dejan

DTMF Digits Dialing issue on 8831 Conference Phone

Hi,
anyone had a DTMF digits dialing issue on Cisco 8831 conference phone. If I have to join any external conference bridge, when I trying dial my user id and password its not sending the digit i am dialing. Conference bridge is saying wrong PIN dialed.Please suggest

Hi
Actually this problem was on SIP call,User was dialing shortcode and it was going through their SIP trunk, raised case with TAC and they replied "its expected behavior and documented in the release guides, we do not find any defects filed to fix this. we are hoping, this behavioral change would be included in the future releases"
version of call manager 9.1.2.11900-12
current firmware running on the phone-SIP 9.3.3.5

Conference phone with a wireless phone.

VOIP8551B from Philips looks nice but I need a good conference phone in the base unit together with a wireless phone as well. Is there such a set? I am not looking for a USB connected one. I need a one that do not need a computer (usb) to work.

Hi Matt,
There is known defect about DTMF at FXS of UC320W through FXO. We have a beta image which resolves it. If you would like to use it, please send me an email at [email protected] and let me know your CCO ID. I will post the image for you to download.
Best regards,
Wendy Yang

Code for 8831 Conference Phone

Are the COP files and code available for the new 8831 Conference Phone for Call Manager 8.5?
I can't find them on the download site.

Hi Troy,
Here's the path
Downloads Home
Products
Unified Communications
Call Control
Cisco Unified Communications Manager (CallManager)
Cisco Unified Communications Manager Version 8.5
Unified Communications Manager/CallManager Device Packages-8.5(1.17115)
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen

My cisco conference phone cannot register with my CME router

Hi,
I am trying to configure my conference phone cp8831 on CME 3945 but the phone cannot register.
The status of the phone "phone not registered"
CME version
#sh telephony-service
CONFIG (Version=10.0)
=====================
Version 10.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
IOS version
#sh version
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.4(2)T1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 10:22 by prod_rel_team
Someone can help me with this issue?

Hello,
Is your conference phone getting an ip address? If yes, it is on the correct subnet?
Thanks,

Cp-8831 with uc560?

Client interested in purchasing the wireless conference phone - cp-8831 - for use with a uc560 8.6(2)... that possible?
not seeing it in the type list, but perhaps there's an equivalent that can "fake it"
thx

cp-8831 is not supported....
Below listed are the phones supported in UC560 - 8.6.2
50x-30x
51x
521-524
525
6901-6911
69xx
7906-7911
7914
7915
7916
7921
7925
7931
7936
7937
7940-7960
7941-7961
7942-7962
7945-7965
7970-7971
7975
8961
9951
9971

Third party Video conference device conferencing with Cisco SX80

Hi ALL,
We have Cisco BE6K (Call Manager 10.5), CTS-SX80-IPST60-K9, DX650, 7861, 8861 IP phone, Cisco 2901 Voice Getaway, 3750 Switch and ASA. internet was connected on ASA. SIP connectivity (For DID) connected to Cisco 2901 Voice Getaway.
I need to know cisco best practice and implementation guide on below question:-
1. How Third party Video conferencing units (LIFESIZE and Polycom) can conference and call with Call Manager IP Phones and SX80. Third party device will not register on MY CUCM.
2. We have two site. On Sit-1 has own Call Manager 10.5 and Site-2 has own Call Manager 8.X both are reachable. Now How they make a call?
Thanks
Gazi Afzalur Rahman

HI Ayodeji,
Thank you for valuable update.
1. On B2B solution :-
a) Are Third party device needs to register on CUCM or not. What the B2B solution says because that device not register on CUCM?
b) Which connectivity i need Internet and SIP or Only Internet?
c) On other site are they need SIP connectivity or Internet ?
2. Sip trunk between the two clusters are we need SIP connectivity on both site or need only reachability? On this scenario are we need VOICE RT because we have different data connectivity router for both site.
Can You refer any CVD guide of implementation ..
Thanks In Advance
Gazi Afzalur Rahman

Analog conference phone on digital PBX?

It won't work on a DIGITAL line, but most Digital PBX had options for analog ports, and you can swap into that port just like you were hanging a fax line.

pretty much what it says up top, we've got a nortel norstar modular PBX that is (I think) digital, and I've got 2 polycom soundstation 2W conference phones that have apparently been collecting dust for 3 years. I could get one line peeled off and sent to our conference room just for the phones, but it looks like there are adapters that would allow at least SOME of our phone functions to work, but I'm having a bear of a time figuring out what I need. Can I get this phone working with this system, or should I stop fighting and just give it it's own line?
The phone line does come in via RJ11 to each office
Nortel Norstar/Meridian PBX system, and I'm hooking a Polycom Soundstation 2W phone up to it. Thanks for your time spiceheads!
This topic first appeared in the Spiceworks Community

Hello my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3 your answer will be highly appreciated

hello
my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3
your answer will be highly appreciated

Use the links provided.
Recover your AppleID via https://appleid.apple.com/
Reset your password via iforgot.apple.com
If the iPhone is asking for an AppleID you do not recognize, the iPhone
is Activation Locked. Only the person who initiated the Activation Lock
can remove it. There is no workaround for Activation Lock.

HT201363 my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3

my i phone was dropped and i changed its battery now i need to activate it but i forgot my apple id and password who can unlock my i phone 5 with IOS 8.1.3

Use the links provided.
Recover your AppleID via https://appleid.apple.com/
Reset your password via iforgot.apple.com
If the iPhone is asking for an AppleID you do not recognize, the iPhone
is Activation Locked. Only the person who initiated the Activation Lock
can remove it. There is no workaround for Activation Lock.

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem.

How do I find the phone # associated with my dryloop account?

Customer service said they would be open til midnight but they're closed at 11:20. How do I find the phone # associated with my dryloop account so that I can pay online.

Hi, yogaonmain!
I'm sorry we were not available to get that information to you. Your mobile telephone number will be listed on your paper statement. It is also typically listed inside your phone under the Settings/Phone info section.
If you need this information immediately, please call our customer service line at 800-922-0204.
Thank you,
AdamE_VZW
Follow us on Twitter @VZWSupport

How do i remove a device from my apple id on find my phone app with out erasing the device.

How do I remove a device from my apple id on the find my phone app with out erasing it becase it still belongs to my child? I need to remove a iPad mini and a iPod 4th gen.
Thanks

If you haven't already, do Settings > iCloud and turn off Find My iPhone. You will have to supply your Apple ID and password.
Then do Settings > General > Reset > Erase All Content and Settings to make the iPhone appear as if it just came out of the box.

Conference Phone 8831 with 7.1(3)

Similar Messages

Maybe you are looking for