Config EWA in SolMan 7.1

Gurus,
How do you config Earlywatch Alert in SolMan 7.1?
There's no DSWP or SMSY anymore.
Regards,

Hi Lori,
It is very easy once you know how to do it, and here is the way to do it properly, with no being quick, as the first respondent is indicating?
You start Solman_workcenter > System Monitoring Tab > Setup Link > EarlWatch Alert configuration.
Here you can select for one solution or all solutions.
This will basically take you to what you may be familiar with as the screen in solman_ewa_admin.
If you select by Solution , the view in that screen is just for the one solution, and if you select for all solutions will give you the view you were accustomed to before, all the solutions.
Regards,
Paul

Similar Messages

Setup EWA in Solman - Service Cannot be Reached

Hi,
I was trying to setup EWA in solman for my satellite system. In Dswp-> Solution->Operation Setup->Setup EarlyWatch Alert, I got the following error:
Service cannot be reached
What has happened?
URL http://serverxxx:port/sap/bc/webdynpro/sap/dswp_earlywatch_admin call was terminated because the corresponding service is not available.
Note
The termination occurred in system SMN with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:ACMSAPD02_MNR_03-v:0-s:403-r:Forbidden
May I know how to rectify this? Thank you.
regards,
zl

Hi,
Please check if the service is activated.
Transaction SICF.
Hierarchy Type: Service and execute it.
default_host-> sap-> bc-> webdynpro-> sap-> dswp_earlywatch_admin check if this is activated, If it snsot activated, activate it and test the service by using right mouse option. While testing the service it will ask for a userid and password, enter your user id and password. and login it should allow you to login and check the service successfully.
If you are not able to login due to authorization issues, please use transaction SU53, there you will find any missing authorizations. After you add those authorization objects you should be successfully open the service.
If possible perform the IMG activity SAP Solution Manager-> Basic Settings-> HTTP Services-> Activate Solution Manager service.
Hope this helps.
Thanks & Best Regards,
Raghavendra.

EWA via solman for SQL Server

Hi,
I'm trying to configure EWA via solman for an ECC 6.0 system on MS SQL 2005.
I've completed all the necessary steps i.e. all the RFC's are working fine, RTCCTOLL is ok, the report is getting generated in SDCCN on the satellite system...however it doesnt seem to get transfered to solman.
RSCOLL00 gives a weird "database system not supported " message although it shows finished successfully.
Is there some other program for SQL Server or maybe something that I'm missing...
Pls. help.
Thanks a lot,
Saba.

Hi Saba,
you can't schedule EWA for Solution manager sessions in SDCCN of the satellite. The only kind you can schedule in the satellite is the kind you send directly to SAP, that's why SDCC_OSS appears as the RFC connetion. You have to fetch EWA for Solution Manager sessions from the solution manager using a refresh sessions task. Does anything happen when you perform a refresh sessions task in SDCCN on the satellite (when you pick the RFC to Solution Manager as the destination)?
You should also check that the service definitions are current in both satellite and solution manager systems. Note 727998 explains how to delete and replace them. (Often the only way of being totally sure that the service defintions are correct.)
best regards,
-David.
Edited by: David Murphy on Nov 20, 2008 4:26 PM

Average Response Time Different in SLR/EWA (in solman) and ST03 (in satelli

Hi All,
We find that the average dialog response time shown in SLR and EWA reports of Solman is much lower (250 ms) whereas the dialog response time shown in ST03 transaction of the system (XI instance) is high 2000 ms.
Which one is correct and how can I correlate these two values if both are right in their own way.
regards

Hello,
The data source is ST03, therefore unless there is an issue with the collectors, you should assume the ST03 data is correct.
Pleae run RTCCTOOL on the managed system and ensure ST-PI and ST-A/PI are current.. Also make sure your SAPOSCOL is current.
There is a possibility that there was an error during preparing the transport to send the data back to Solution Manager, so scan the SDCCN task logs for any errors/warnings on the managed system. You can also check the transport to see what vaues are being returned to Solman's service session. If the have the same value as ST03 at this point, then there is an issue witht eh EWA/SLR provcessing. If the data is not the same here as ST03 then there was an issue with the SDCCN tasks.
If the data collection is not at issue and the transfering of that data to Solution Manager service session had no errors, then Please follow Jared's recommendation, as this would then be an issue processing the service sessions, and this could be due to outstanding Service Content updates. This can be checked with transaction code AGS_UPDATE.
Regards,
Paul

Configuration EWA in SOLman

Hello
I need to configurate the EWA in my solman (SP12), and I need to monitori the all system, to active the connections external to support from OSS marcket place, and maintinacer oioptimaze configuration.
Please I need the guides for these configuration
Where can I find these guide??
Do I need update the high stack o no???
Any suggestion.
Thanks
Danny
Edited by: Danny Sanchez on Jan 29, 2010 12:08 AM

Hi,
Hav a look at the SAP Tutor file which provides the steps for EWA.
https://service.sap.com/~sapidb/011000358700006936042005E.sim
Also, chk the below thread.
How to generate Early Watch Report from SAP SOLUTION MANAGER
Re: Configuration EWA in solution manager for systems in the landscape
For Mopz, chk the SMP
https://websmp110.sap-ag.de/mopz
https://websmp110.sap-ag.de/~sapdownload/011000358700000422572009E
~Waseem.

How to configer EWA?

Hello all,
How to set up the EWA ?
How to find for which system alerts are processed?
Please let me know how to use EWA process step by step.
Regards,
Swaroop

Hello Swaroop
Use this very good link for Solman activities
http://service.sap.com/rkt
http://service.sap.com/rkt >Solution Manager>solution manager 7.0-->Technology Consultants &
System Administrators -->It will open the following page:
SAP Solution Manager 7.0: Learning Map for Technology Consultants & System Administrators
there you have to open the tree for EWA, Service level and solutoin reporting, there you will get .sim files
for EW configuration (excellent step by step guide)
https://websmp201.sap-ag.de/~sapidb/011000358700006936042005E.sim
thanks
Bhudev

Setting up EWA Alert configuration in Solman for Sattelite system

I have followed the sap tutor for setting up EWA in solman which i got from market place, I have done the configuration step by step accordingly but when i see in DSWP i see Red flagged report that it throwed some error and not able to generate report i have activated SDCCN in satllite and all the basic steps but still its not working. Pleaase give some step by step configuration if available to you it ll be a great help.

Hi Rahul,
Please check if the following links help you:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bc0cb290-0201-0010-3b90-8f3b6bb841ed
http://help.sap.com/saphelp_nw04/helpdata/en/45/cb27429d16db2ce10000000a1550b0/frameset.htm
Hope this helps!
Regards,
Saumya

EWA report problem

Dear Experts,
I have done with the configuration of EWA in solman 4.0 with one of the satellite system in our landscape.
i can see early watch reports are in red color and Dates for this session are overdue,when i checked the background job(SM:EXEC SERVICES) it is getting cancelled with SYNTAX_ERROR.please find the below log for the same
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant &0000000000069, user ID CGSOLMAN)
RDSMOPBACK_AUTOSESSIONS : MemSize Begin = 1379040
Solution CGMOPZ is being edited (Operations)
Solution CGMOPZ is being edited (Setup)
Solution Development Landscape is being edited (Operations)
Solution Development Landscape is being edited (Setup)
Solution Quality Landscape is being edited (Operations)
Trying to perform session 0010000000018
ABAP/4 processor: SYNTAX_ERROR
Job cancelled.
and also find the dump log
Error analysis
    The following syntax error was found in the program
     RDSVASAEA_ROOT_____________050 :
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found"
Information on where terminated
    Termination occurred in the ABAP program "SAPLDSVAS_PROC" - in "EXECUTE".
    The main program was "RDSMOPBACK_AUTOSESSIONS ".
    In the source code you have the termination point in line 2153
    of the (Include) program "LDSVAS_PROCCD0".
    The program "SAPLDSVAS_PROC" was started as a background job.
    Job Name....... "SM:EXEC SERVICES 000000002100100"
    Job Initiator.. "CGSOLMAN"
    Job Number..... 16013500
Please let me know how to sort of this issue.
Points will be awarded without fail!!
Waiitng for your turn!!
Regards,
Laxman
Edited by: Laxman Challa on May 20, 2008 2:56 PM

Please replace the Service Definitions in your SAP Solution Manager
system as described in SAP Note 727998.
As of SAP Solution Manager 7.0 (= 4.0) Support Package Stack 15 (which
includes ST-PI 700_2005_1 SP06) you can trigger the required steps
within transaction SDCCN:
Menu Utilities -> Maintain Service Definitions ->
Select 'Delete and Replace Service Definitions -> Confirm this
selection-> Confirm that you want to delete the definitions -> Confirm
that a new task 'Service Definition Refresh' was created
Take a note of the task id -> Review the log for this task id when it
is completed. You should not see any errors for either the update
of a Service Definitions table or the generation of any re-import
include.
Reschedule SM:EXEC SERVICES and the reported dump will no longer
occur.

How can generated EWA for SAP Portal system

Hi Guru there,
Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
How can I generate EWA from solman?
waiting for your kind reply!
best regards,
WEI

Hi Wei,
Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
This SAP Note describes the setup of EWA for NON-ABAP Components.
Please see the description and the attachments.
Best regards,
Ruediger

Troubleshooting EWA, tasks run but sessions not in satellite

I am trying to troubleshoot EWA in SolMan. It has worked for ages and then it stopped. We have now implemented the latest-and-greatest ST-PI and ST-A/PI.
In SDCCN in the satellite system I see a "maintenance package" and a "session refresh", daily, both with the SolMan as their "task system".
This sounds a bit excessive to me, as note 763561 says that a "maintenance package" already contains a "session refresh".
Anyway, when I go to the SolMan, txn DSWP, and I order an "EearlyWatch alert" session for the satellite system, it never shows up in the satellite system. In SolMan it first gets the status "hour-glass" (meaning "waiting for data") and then the status "red flag" (meaning "data overdue").
The RFC-destinations are fine. Moreover, the logs of the SDCCN tasks do not show any problems with the RFC-destination.
I have forced a refresh of the service definitions: first the SolMan got new definitions from O01, and then the satellite systems got them from the SolMan.
Where do I look next?
BTW We are only monitoring ABAP.

Re: check job /??/TASK_PROCESSOR
Thank you. I suppose you mean /BDL/TASK_PROCESSOR? It is running fine (hourly), in the SolMan and in the satellite systems. It doe snot seem to achieve much, though... .
The SolMan also has a number of SM* jobs, some running hourly, some running daily, some weekly.
Anyway, I found that some of them have problem at each run.
SM:GET CSN COMPONENTS runs weekly and always fails with this error:
Step 001 started (program DSWP_GET_CSN_COMPONENTS, variant &0000000000074, user ID ...
Internal error (SOLAR 001)
SM:SYNC SAP SESSIONS runs daily and always fails with:
Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000000512, user ID
Error during call of SAP back end system (see long text) (SOLMAN_SAP_BACKEND 005)
The long text says:
Error during call of SAP back end system (see long text)
Message no. SOLMAN_SAP_BACKEND005
Diagnosis
Error calling SAP backend system: Name or password is incorrect. Please re-enterSAP-OSS via RFC destination
Procedure
Check the configuration of your connection to SAP in the Implementation Guide (IMG).
Use note 320991 to analyze RFC error codes.
Note 982045 contains information about repairing the RFC destination SAP-OSS
I think I have found a clue! As I understand it, it is SolMan having a problem calling SAP SMP over RFC.

Configuration EWA in clien with two solution manager

Hello
I have a question I am activating EWA ¡on SOlman but I have two solman fo the same company, el first is for management r3 system and second is for management xrpm,bw,portal system.
The EWA is running in the first solman, and the saprouter I think is here too. So I want to activate the EWA in the second solman in the guide I have this note 33135 an this talks about connetion with SAP.
Is possible that the EWA in two solman for the same client.
Addionaly the Should the rscctool report run in the satellites systems too?
Thanks
DS

Hello Danny,
There should be no conflicts providing you keep a few things in mind.
On the Satellite, in SDCCN > Setting> Task>Specific> RFC Destination
Please make sure that you define one Solution Manager system as the Master. This will be the Solution Manger system that will schedule an SDCCN EarlyWatch Allert task automatically on the Satellite, throught the Maintenance Package, so it needs tol be the one specificed in the Mainatence Package task. In other words you set up the recommended EWA Activation as documented at http://service.sap.com/ewa for one Solution Manager system.
Then for additional Solutioin Manager systems you would create an SDCCN Task in the same way you would generate an ad hoc EWA report, only you would choose the RFC Destination for the second ( and/or subsequent) Solution Manager systems, and you would specify it as a periodic task so it would reschedule itself each week, so to affect automation of the sending of the SDNNC session data to the other Solution Manager Systems.
This way you will not have conflicts between the solution manager systems.
Regards,
Paul

EWA-Email Notification

Hi All,
we are configured EWA in solman system also enable to view the weekly report in solman
Issue is :
We are not able to recieve EWA report through auto matic email
Note :i am bale to send manually the report to email outlook address and also dswp>edit>emial address are maintained(No use)
Any one please suggest how to get EWA automatically.
Thanks,
Raju

Hi,
Thnaks for quick reply .
I have configured Scot setting also i am able to send message manually but issue seems like we are not able to get EWA for auto-matic mail Notification.
Thanks,
Raju

7.1 EWA Reports

My systems EWA reports are running in my new 7.1 system, but where are they in SOLMAN and how do I setup the email feature?

Hello,
Similarly for EWA email -
Solman work center --> system monitoring work center --> Configure Automatic reports Emailing --> select the solution --> Edit --> Email recipient
Thanks

[Problem] Service Report - SAP EWA - Download Problem

Hi Gurus
I managed to create and activate EWA for Solman 4.0
but I got problem with the result generated by Solman. Below is the quote from the EWA report
Download Problem
We were unable to perform a correct analysis because essential parts of the download data are missing. This is most likely due to a problem with data collection or transfer.
Recommendation: Check the log for this session in the Service Data Control Center (execute transaction SDCC or the new SDCCN in your system). If an error is listed, perform the Service Preparation Check.
Implementation: To perform the Service Preparation Check, execute transaction SDCC and choose Information -> Service prep. check, or if you are using SDCCN, create a new "Service Preparation Check" task.
i've already run the service preparation check and follow all the recommendation.
and from report RTCCTOOL, i didnt get any recommendation to follow
can anyone help me with this ? thanks
below is my Solution Manager component
SAP_BASIS - 700 - 0011
SAP_ABA - 700 - 0011
PI_BASIS - 2005_1_700 - 0011
ST-PI - 2005_1_700 - 0004
ST - 400 - 0010
ST-A/PI - 01K_CRM560 - 0000
ST-ICO - 150_700 - 0007
ST-SER - 700_2005_2 - 0002
below is the satellite system (SAP server that i try to collect the data for EWA report) component
SAP ECC 6.0
SAP_BASIS - 700 - 0005
SAP_ABA - 700 - 0005
PI_BASIS - 2005_1_700 - 0005
ST-PI - 2005_1_700 - 0001
ST-A/PI - 01K_ECC600 - 0000
SAP_BW - 700 - 0005
SAP_AP - 700 - 0002

Hi Didik,
have you run RTCCTOOL in both systems (SolMan, ECC)?
ST-A/PI level is OK
ST-PI - 2005_1_700 is not on latest Support Package (SolMan, ECC).
RTCCTOOL will check Support Package Level as well as the availability of important statistical data (for example Workload Statistics, tx ST03N).
Which parts of the EWA do not contain data?
Best regards,
Ruediger
Edited by: Ruediger Stoecker on Mar 19, 2008 8:00 AM

EWA Session does not appear

Hi all,
I've installed SolMan 7.0 EHP1 and complete the initial and basic configuration using SOLMAN_SETUP tcode.
Then I connect a satellite system with SMSY tcode and setup the EWA configuration.
Now I want to create a EWA Report manually but when I run the REFRESH_SESSION from SDCCN tcode on satellite system the EarlyWatch Alert for Solution Manager Session does not appear.
Could you please help me?
Thanks in advanced
Moreno

1. Did you setuo EWA in SOLMAN for that satelitte System? DSWP->Select the solution->Operations Setup->Solution Monitoring->Early Watch Alert->Setup Early Watch Alert.
2. If you have done this, then goto DSWP->Select the solution->Operations->Solution Monitoring->Early Watch Alert->Just click on the scheduled EWA. It will tell you why the session data is not collected from satelitte system though you ran REFRESH_SESSION at satelitte system.
OR
3. Check whether EWA is active at solman for that solution(Satelitte System).
DSWP->Settings->Solution Monitoring->Early Watch Alert
4. Check maintenace package and EWA is scheduled after you ran REFRESH_SESSION at satellite system(SDCCN), if so, then select the maintance package->click on details button(right side of the screen). Make sure that "Target RFC Destination" under Target System should be Back RFC of Solution Manager.
Hope this may help you.
Regards
Sanjai

Config EWA in SolMan 7.1

Similar Messages

Maybe you are looking for