Config for Cucle Count method by storage type

Hi All,
We wanted to activate teh cycle counting inevnetory for some storage types. The pre-requisite is that assign the Inventory method ( ST, PZ etc.) to teh storage type. We are in ECC 6.0 and I don't see any indicator which I can assign to teh storage type. We do see only ST, PZ or blank i.e. no inventory.
Can anybody please help that where we can add the inventory method for cycle count so that we can assign it to the storage type?
Tahnks inadvance for any help.
regards,
KHAN

Hi,
Flag the box at the header leval i.e. cycle count
regards

Similar Messages

In GR, T331 entry for warehouse number GVW and storage type 916 not found

Hi friends,
while doing gr, it is giving following error. we are having wm
T331 entry for warehouse number GVW and storage type 916 not found
regards,
william

Hai,
Add the entry 0f 916 storage type to ur warehouse by copying from std i.e 001 in SPRO/Log Exe/WM/Master data/Define str type.
Regards,
BSK

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

Combined TO for multiple deliveries and multiple storage types possible?

Folks,
I would need to have 1 pick TO for a shipment which has multiple deliveries and materials that are stored over several storge type. With stanrd SAP this is not posible. Any ideas wether this can be achieved through a user exit?
Regards,
MdZ

Hello MdZ,
If you can suggest me regarding TO for Group...
Using VL06O (outbound delivery monitor); If I create the TO for outbound delivery, it prints the pick-sheet for each storage type.
But if I attach the delivery to u2018WM groupu2019 and then create the u2018TO for Groupu2019 using VL06O it does not create any pick-sheet.
If you can suggest somethingu2026
Regards,
JPS

U0093Addn to stocku0094 for putaway strategy u0093 u0093 in storage type not working

Hi
It seems that the flag Addn to stock for putaway strategy in the storage type 103 configuration is not working fine as the quantities of the same material with the same batch sent to the same stype 103, and destination bin are not being added. So by running stock report in WM we see several lines with partial quantities instead of only one line with the total quantity in place. Do anybody know how can that be solved? Or what can be the route cause of the issue? Is there any OSS known applicable to fix the problem?
Thx for your help

Hi Alba,
Please check the WM views in MM.
I've checked:
(SAP help pushing F1 when the cursor is set on this thick box)
<i>Indicator: Allow addition to existing stock
Indicator determining whether a material with particular characteristics may be added to existing stock of the same material with the same characteristics in one storage bin.
Dependencies
If the storage type control table does not allow additions to existing stock for this storage type, the indicator set in the material master record is ineffective.</i>
+
(SAP help)
http://help.sap.com/saphelp_46c/helpdata/en/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
I think you have to set this indicator!
BR
Csbaa

Sorting for storage type in LM12

LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
The standard LM12 shows sort order for storage type as numeric storage types first then alpha storage types.
But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
Plz can any one help us to give solution for above issue.

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Any user exit for automatic storage type allocation in Warehouse Management

Hi All,
Please help me to solve this issue,
Currently our ware house process is like this
Goods coms form the production for the put away process storage type they are enering manuvally.
Now for the improvement purpose they want storage type should come dynamically, with out entering manuvally.
Could any body help to solve this (Dynamic storage type allocation) issue.
Regards,
Muralikrsihna Nandigama.

Hi All,
Please help me to solve this issue,
Currently our ware house process is like this
Goods coms form the production for the put away process storage type they are enering manuvally.
Now for the improvement purpose they want storage type should come dynamically, with out entering manuvally.
Could any body help to solve this (Dynamic storage type allocation) issue.
Regards,
Muralikrsihna Nandigama.

Stock removal FIFO in storage types

Hi...
Multiple storage types AB01, AB02, AB03, AB04 (high rack storage types) are there in EWM warehouse.
Putaway completed,
for article A in AB03 storage type having GR date 09.01.2013
for article A in AB04 storage type having GR date 12.02.2013
for article A in AB02 storage type having GR date 20.03.2013
for article A in AB01 storage type having GR date 12.04.2013
As per FIFO stock removal strategy sequence must be as follows
1.     AB03
2.     AB04
3.     AB02
4.     AB01
Currently its going in the sequence AB01, AB02, AB03, AB04.
Can anyone share the FIFO stock removal strategy config
Please suggest how this can be corrected.
SAM

Hello,
I suggest you to Define Storage Type Group and assign your storage types to Storage Type Group. Then, in your search sequence, you assign Storage Type Group instead of Storage Types.
System will follow the search sequence as you mentioned.
Regards,
Sathish

Limiting Inventory Display of Storage Types within LX02

Hello All,
We are using SAP WM and have a situation where we are contracting with a 3rd party warehouse to hold some raw materials for us. We will have a captive user account that will only permit the employee at the 3rd party warehouse to perform certain restricted transaction codes. In one of the transaction codes that displays WM-based inventory, we want to only have transaction code LX02 - STOCK LIST display only the storage type that represents the inventory at that facility. We have a single WM warehouse that has multiple storage types and have allocated one storage type to represent that 3rd party warehouse location (which really is just an extension of the manufacturing plant). For example, if I have storage types A, B, C, and D within a single WM warehouse, and I have made the decision that C represents the 3rd party location, then I only want to setup SAP security to restrict the 3rd party warehouse employee to be able to only see storage type C and not the others. Can this be done with the proper assignment of security authorizations to allow this? If so, what is the authorization object that controls this?
BTW, we do not want to use a separate WM warehouse or plant to control this as that results in solving the above problem but introduces many other issues and problems.
Thanks!!

Hi,
I checked that report and it uses logical database S1L. If you display documentation for this logical DB in SE36 you will find this section
Authorization checks for the warehouse number take place in the database.
Warehouse number
So it does not seem that tit will work for you. What you can try to do is to enhance LX02 to perform additional authorization check. Using implicit enhancement points you can add code to the beginning of any routine. In this case you could enhance routine call_alv.
Cheers

Error during Stock movement between two storage type

Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
Thanks

Dear,
Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

Storage unit types per storage type

Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx

Hi,
Goto SPRO --> Logistics Exection --> Warehouse Management --> Master data --> Define Storage type
In this node for your warehouse number and storage type combination activate the check box SUT check active.
Regards,
DilliB

Storage Type +++ in Storage Type Search Sequence

Hi Everyone,
Can someone please explain me what a '++' signifies in the Storage type Search Sequence. Like for a warehouse, for a storage type indicator, for a stock category etc. one has defined storage type: '++' in the first storage type column. What does this mean. I understand '***' might imply all storage types are equal, try all. But what does +++ mean?

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

HL Physical Inventory: Control data for storage type is missing

Dear experts,
When performing an ad-hoc HL inventory in EWM, I'm facing following issue after I try to save the countet inventory document:
This is how my storage type where the inventory will be performed looks like:
What could be a reason for such a behaviour?
Thank you in advance
BR
Denis

Hi Denis, you need to have the parent object in the counted item list. That means it is necessary to count the HU with parent object as Storage Bin and then you can count HU content with the parent object as HU.
When I deleted the parent object I was able to simulate your error:
Brgds,
Petr

Config for Cucle Count method by storage type

Similar Messages

Maybe you are looking for