Config iPhone 4s for wpa2-enterprise

How to configure an iPhone 4s for wpa2-enterprise

I've recently upgraded my iPhone 4 to ios 5.0.1 and it exhibits exactly the same problem at the Office where we use WPA2-Enterprise which basically means the Cisco Jabber app is useless when moving around the complex and in and out of sleep mode.
What's odd is this wasn't a problem on ios 4.3.3

Similar Messages

  • Installation of certificates for WPA2-Enterprise?

    Can someone please tell me where I can find the instructions on how to install certificates required for WPA2-Enterprise WLAN support?
    Thanks.
    --Philip

    Hi,
    I dont know what yo want but first you must install library for ASMlib
    there is link to libraries
    http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html
    Regards,
    Tom
    http://oracledba.cz

  • IPhone 3GS (au) support for WPA2 Enterprise

    Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?
    Also, whether it depends on the version of iOS as well.
    Thanks.

    Enterprise networking is now supported I believe.
    It's not something I know much about, but the following article(s) may help you.
    Installing a Profile
    Configuring the Apple TV

  • WPA2 Enterprise with netctl

    Hi,
    I'm trying to connect to my university wifi which I believe is WPA2 Enterprise protected. I read the wiki about using the Eduroam netctl profile example for WPA2 Enterprise networks but it doesn't seem to work for me. This is what I have:
    Connection='wireless'
    Interface=wlp4s0b1
    Security='wpa-configsection'
    Description="nyu wpa2 network"
    IP='dhcp'
    TimeoutWPA=30
    WPAConfigSection=(
    'ssid="nyu"'
    'key_mgmt=WPA-EAP'
    'eap=PEAP'
    'proto=WPA2'
    'phase2="auth=PAP"' #maybe MSCHAPv2
    'auth_alg=OPEN' #maybe
    'anonymous_identity="anonymous"' # ex: tu-dresden.de
    'identity="myusername"' # ex: [email protected]
    'password="mypassword"'
    'ca_cert="/usr/share/ca-certificates/trust-source/mozilla.trust.crt"'
    Can someone point me to related info or correct my profile? Thanks.

    Does your university have a site with some information/guidance for using eduroam?
    Have you tried other example profiles from here, such as this one and  this one? The wiki refers to this AUR package, which seems to be where you got the profile you've tried. Perhaps try the other example profiles.

  • TS1398 Does IOS 6.1.1 support WPA2-Enterprise?

    Does IOS 6.1.1 on iPhone 4s support WPA2-Enterprise?  If I choose other under Wi-Fi I can enter domain credentials and password, but as soon as the phone goes to sleep it no longer can connect to Wireless APs with WPA2-Enterprise authentication.

    works fine here.  Have you reset the network settings on the phone

  • WAP4410N WPA2-Enterprise - reconnect failed

    We have a WAP4410N wireless ap configured for WPA2-Enterprise. Initially everything works. Issue the user the proper certificate and they sign on correctly but once they disconnect and try to reconnect later it get stuck on "Validating Identity". The request never get to RADIUS server (no success/failure log entry, no radius traffic). Once I reboot the access point everyone can connect again but as soon as they disconnect the problem happen again.
    We testing other security settings (WPA-ENT, RADIUS(!), WPA2-Personal etc) and no problems. With older firmware have the same issue.
    Operating system: XP SP3, RADIUS server: IAS. Firmware: 2.0.1.0
    Anyone have any ideas?
    thx
    rokai

    I tried everything without result. Nobody have same problem? The hardware version is WAP4410N-E V01. Is it possible, that v02 units resolve this issue?
    Thanks in advance.

  • Can we still use PEAP-MSCHAPV2 for authenticating to a WPA2-Enterprise network?

    L.S,
    For authenticating to a BYOD wireless network a lot of companies use WPA2-Enterprise connected to a Microsoft IAS/NPS server to authenticate against Active Directory. There seems to be a way to intercept this wireless traffic using a roque accesspoint using the same (company) SSID-name and tools like freeradius-WPE and cloudcracker.
    If the BYOD client doesn't check the certificate provided by the fake radius server, the MSCHAPv2-negotiation can be discovered and the hacker will get the username AND hashed password which can be lookup'd by rainbow tables sites like cloudcracker.
    Is there still a safe way to deploy AD-authentication to BYOD clients?
    Kind Regards,
    Arjen

    I have tested the WPA2-enterprise/PEAP-MSCHAPv2 exploit this week placing a laptop in my car on the company parking lot with a Kali image, using hostap and freeradius-wpe configured with the company SSID. It was very easy to find out the mschapv2 challenge/responses of a number of android/windows phones that there just walking past my car. Also iPhone has a bad WPA2-enterprise implementation (see: http://research.edm.uhasselt.be/~bbonne/docs/robyns14wpa2enterprise.pdf), so bye bye WPA2-enterprise/PEAP-MSCHAPv2.
    Wonder what other (large) companies are using for their BYOD wireless networks! EAP-TLS using certificate sounds like the only feasible option, however, we are afraid that the enrolment of certificates to the BYOD-clients will be a total disaster. I heard stories that some android phones lose their client certificate after a reboot :(

  • Creating a Configurator profile for ATV on WPA2 Enterprise?

    Alright, so I have a couple of Apple TVs (latest version) which I want to get up and running on our wireless network here at work. We have a WPA/WPA2 Enterprise network. Our access point is simply an Airport Extreme and the RADIUS server is running on OS X Server 10.6.
    I understand that I have to load the Apple TV with a profile to get it to connect to the wireless network but I can't for the life of me figure out what the correct settings are for my network. I'd ask our IT department but the problem is that I am the IT department.
    When I try to connect using the profiles I've created I get the error "There was a problem connecting to the network. Check your settings and try again. (-369033215).
    The first issue (I believe) is that I might not be choosing the right EAP types. In configurator I can choose TLS. TTLS, LEAP, PEAP, EAP-FAST, EAP-SIM, or EAP-AKA. I have no idea which one I should be choosing or how to figure out which types my network supports. Also some of them want me to enter an outer identity which again, I have no idea what to put there.
    The second issue may be the trusted certificates - I may not have the correct one(s). When I check the RADIUS server settings, it shows that I'm using a self-signed certificate that I generated quite a while ago (we don't have any actual certs, just self-signed ones - small office, not my area of expertise so I didn't want to waste company money without knowing what I was doing). So, what I did was I opened up Keychain Access, found that certificate, exported it, and imported it into Configurator. I imported it into Trusted Certificates but I didn't put anything in for Trusted Server Certificate Names - should I put anything in there?
    Any help is appreciated.

    Ok that part I put above would go in your SQL, not in the report properties - you also want to replace p.product_image with whatever your BLOB column is, and p.product_id with your employee_id column.
    The apex_util.get_blob_file_src basically does the same thing that you were doing but should be a little simpler to manage.
    http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_util.htm#CHDICGDA
    So:
    1) Edit your sql and try using this function instead of just calling the BLOB column.
    2) Edit the column properties and put #PHOTO# as the link, and #EMPLOYEE_ID# (or whatever your primary key is called) as the Value.
    3) If that long string is still in the number/character format field, clear it out.
    4) If that still doesn't work, install the demo application that comes with Apex and look at Page 3. That is all I did.

  • Support for WPA-Enterprise, WPA2-Enterprise wifi s...

    hi all
    I try to connect my phone to corporate wifi but failed because the phones hangs. my company uses WPA2-Enterprise wifi. my phone clearly works with WPA2-Personal wifi security at home. will these profiles of security be supported in future update?

    Although this is the right section for this question, let us continue with your original post …

  • After IOS 5 upgrading Iphone we set up wireless network each time (WPA2 Enterprise)

    Our company is connecting to wpa2 enterprise.
    when we used IOS 4.XX we could connect wpa2 enterprise
    but after upgrading IOS 5.0, it occured some problem.
    Our staff should change a password per 3 month, at that time we should delete a network
    but SSID set it up again each time and put a userID / Password when we connect wifi
    i read other comment that user sloved problem using iPhone Configuration Utility in apple support communites but it bother our staff.
    is there another sloution?

    Has anyone tried it? I would like to have an answer, I'm trying since Friday and is working properly.

  • Wireless WPA2-Enterprise + 802.1x (EAP-PEAP/MSCHAPv2) config

    Hello,
    We're in the process of moving all of our wireless from WPA-PSK to WPA2-Enterprise with 802.1x EAP-MSCHAPv2 (PEAP). All workstations are Windows 7 with the 2SP3 IR2 client. What we'd like is for the 802.1x SSO functionality to work so users do not have to sign in computer only first and then use the novell login after connecting. I've followed the documentation for enabling 802.1x that Novell provides with no success. I'm hoping someone has done this or can point me in the direction of documentation that can use to better understand what configuration is needed to make this work.

    Originally Posted by djaquays
    I haven't had a chance to play with this yet on IR8, but I'd be curious of your steps to get this working.
    I'm not sure why FreeRadius would make any difference vs ClearPass.. they both speak RADIUS.
    This is the only documentation I can find from Novell: https://www.novell.com/documentation...a/b8jn9w6.html
    It's a couple of years since I did this so my memory is a bit vague... :(
    Did you install the peap plugin on the workstation, if I remeber correctly this was needed?
    http://support.arubanetworks.com/TOO...4/Default.aspx
    Thomas

  • Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise.  We have service through Charter cable.

    Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise.  We have service through Charter cable.
    Thanks for your help!

    Choose the strongest security available on your router, preferably WPA2 using AES encryption and a long complex passphrase with at least 14 characters (the maximum is 63 characters).

  • Free RADIUS/802.1X Service for WPA/WPA2-Enterprise

    Hi, just wanted to let everyone know that I recently started offering a Free Edition of our AuthenticateMyWiFi service, a hosted RADIUS/AAA service offering 802.1X authentication for use with WPA/WPA2-Enterprise encryption.
    The Free Edition features 1 user account, supports 1 AP, and includes: PEAP authentication for wireless and wired connections, web-based control panel, and activity logging.
    This is great for IT professionals wanting to experiment with 802.1X or to get enterprise Wi-Fi security in homes and small offices.
    For more info visit our site:
    http://www.nowiressecurity.com/service.htm
    - Eric Geier

    I recommend contacting Linksys support on the phone and ask them which model router has Radius or Enterprise WPA features. Some home class routers may not have this. Ask and see what is available. 

  • Iphone missing "mode" option in wifi WPA2-Enterprise

    On my iPad 2, when I list the wifi networks and choose our WPA2-Enterprise network, there is a "mode" option to choose either Automatic or EAP-TLS.
    On my iPhone, that option is not there which means I cannot use my Certificate.
    Both devices are running IOS6.
    The iPad 2 has version 6.0 (10A403)
    The iPhone 5 has version 6.0 (10A405)
    I need to connect to my wifi network using a certificate!
    Any and all help is welcomed

    Ok, my bad. I installed the certificate on the iPad and not on the iPhone. Hence, if there is no certificate, the "MODE" option does not come up. iPhones are smarter than me!

  • Airport Express +WPA2 Enterprise, no place to enter username and pass for auth...

    Airport Express version 7.6
    Airport Utility 5.5.3
    I want to use the Airport Express simply to bridge an Ethernet connection to wireless using WPA 2 Enterprise (Wireless network uses RADIUS authentication)
    Wireless mode is set to "Join a wireless network"
    Wireless Security is set to "WPA/WPA2 Enterprise"
    Problem is that there is no place that I can find to enter the username and password for the Enterprise security.
    Thanks

    Airport Express version 7.6
    Airport Utility 5.5.3
    I want to use the Airport Express simply to bridge an Ethernet connection to wireless using WPA 2 Enterprise (Wireless network uses RADIUS authentication)
    Wireless mode is set to "Join a wireless network"
    Wireless Security is set to "WPA/WPA2 Enterprise"
    Problem is that there is no place that I can find to enter the username and password for the Enterprise security.
    Thanks

Maybe you are looking for

  • Is there a way to prevent slash stripping of include parameters in WL7.0sp1?

              We are porting a web application from WL6.1sp2 to WL7.0sp1 and have run into a           strange problem with the JSP include directive. We pass in string values as include           parameters and have noticed that when we have an include

  • Windows 7 64bit Bridge CS3 problem.

    I just purchased a new PC. I am running Windows 7 64 bit Pro. I have installed Adobe Photoshop CS3. One minor annoyance is that whenever I exit Photoshop it won't simply close. It hangs until it says "not responding" and then if I exit again at that

  • Zen is stuck on rebuilding.

    So my zen 2 gb crashed yesterday (like always) it went to the rebuilding screen but it never finishes rebuilding. I reseted the thing like 0 times already and it does the same thing. Same night I just let the battery died and when I charged it up thi

  • How do I get my Itunes on my laptop to sync with my new Ipad?

    I just got a new ipad mini and I want be able to use my itunes that I have on my laptop on it - help please - im not good with technology :/

  • Switch iPod Classic from PC to Mac

    Hi, I recently dowloaded ALL of my music/videos (nearly 33 GB) to my new 80GB Classic iPod using iTunes 7.5 on my Windows Vista. I am now getting rid of the Windows and switching over to a Mac. I know that I must reformat my iPod in order for it to c