Config manager client deployment script states the user is not a local admin

Guys I posted here a while back in regards to deploying config manager clients in a wan environment.One of the suggestions was to use Jason Sandy's script. I finally got around to playing around with the script however I ran into some strange problems
while testing.I am deploying this via the user side of group policy not the computer side. The script goes out and installs the client the problem is when our users click on any Citrix application the script pops up a message box stating "the user is
not a local admin". I don't see how that's the case because this group of users all have local admin rights on there systems. If I run this script as a domain admin or under the system account everything works smoothly. Citrix is the only application
that's doing this however this is a big deal because we deliver all of our enterprise apps using Citrix. So has anyone here ran into this before?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Update says another copy is running and does not update if user does not have local admin rights

An update message popped up when opening Firefox 9.1 Accepted the message to update. Got above error each time I open Firefox as a user without local admin rights.

Hi,
Please see [https://support.mozilla.org/en-US/kb/Updates%20reported%20when%20running%20newest%20version#w_delete-update-configuration-files this.]

Config Manager Client issues

Hi,
We are having a problem site wide with the objects.data file for the WMI repository being bloated up by the config manager client. Once the repository is bloated up we are seeing many issues such as slow log on times, group policy failing, high CPU
utilization and eventually corruption of the repository.
To illustrate this I built a machine, and installed all windows updates including the hotfix rollup for domain joined computers.
At this point I recorded the repository size.
I then installed the configuration manager client and waited.
Within an hour this happened;
Periodically from this point CPU utilization would max out.
I then used the tools available and found that there are millions of entries from config manager in the repository.
According to the WMI teams blog, 300mb+ is very large for a repository. We have hundreds of machines now with repositories between 600mb to a gb in size.
My question is this, is this intended behaviour? the performance impact and logon issues caused by this behaviour are forcing us to consider replacing config manager entirely.
Just to add, we are running Config Manager 2012 SP1

OK,
This for anyone else that has the same issue.
CU2 did nothing to improve the problem. I do however, know what's caused it. The problem is related to using Configuration Manager to deploy windows updates. If I disable the update agent and try the same tests on a machine the repository does not bloat.
Another poster mentioned earlier about a large number of policies- we don't have that- unless you include the fact that every update seems to count as its own separate deployment rather than one deployment per update package.
So if Configuration Manager is designed to store information about each update in the objects.data then I'm assuming that's why the repository is so large- a recipe for slow machines and crashes.
Basically using Configuration Manager to deploy windows updates seems like a very bad idea at this point- unless I'm missing something.

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

Wmi script to find out the time when the user was added to local administration group

Hi Friends,
i need a script/query based on wmi/wql that find out the time when the user was added to local administration group on this computer
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

WMI does not keep security information.
Unless you have enabled auditing, this information is not retained in any way.
If auditing is enabled, you can write a powershell script to look for the specific event in the eventlog. More specifically, you should look for all security events with id 4732 containing the group.
this one command does the trick
get-eventlog -logname security -instanceid 4732 -message *administrators*
https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

HT4436 why do i keep getting a message that states "the user name or password for "icloud" is incorrect?

Why do I keep getting a message that states "the user name or password for icloud is incorrect.

Apple are currently trying to get less secure passwords updated. They require that your account passwords are at least eight characters long and contain both alpha and numeric characters and at least one upper case alpha character.
You might try changing your account password to match these requirements.
My Apple ID

The user does not exist or is not unique - workflow problem

I am using Solution Starters Dynamic Management workflow on my Project Server 2010. I was working fine for a year now, but today all workflows were broken when someone tried to submit them to a next stage. "Workflow terminated. An error has occurred
in the workflow."
I tried debbuging the workflow and it seems to be OK, but the problem appears when it needs to assign tasks to the approvers (they are in the Approvers group). When I remove users from the group that represents approvers (and leave that group empty), it
works fine, so I am guessing that users (who need to approve the stage) are the problem. My administrators are saying that there were no updates or changes on AD machine.
I don't have problem with users in any of people picker fields or anywhere else on the site. I am using claims auth.
What could be the reason for this behavior??
These are main errors from the log:
Failed to persist workflow instance: 7dc2e035-cd02-4284-b851-a829e372a809 with error code: 5, instance data size: 29578, internal state: Running, processing id: 1e2211d2-ef7b-4416-90ef-ac041396c200   2f83db27-34da-4275-a42e-0625240af921
The user does not exist or is not unique.
WinWF Internal Error, terminating workflow Id# 7dc2e035-cd02-4284-b851-a829e372a809
System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: additionalNodes     at Microsoft.Office.Workflow.Actions.OfficeTask.ProcessTaskError(Object sender, EventArgs e)
at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)     at System.Workflow.Runtime.Scheduler.Run()

It appears that this isn't the problem with users, but it is a problem with Office Tasks. This is the main error in ULS logs (same as in the previous post):
"Specified argument was out of the range of valid values. Parameter name: additionalNodes"
I noticed that all content types are gone from my pwa site. Is it possible that my workflow is causing problems when adding tasks because somebody deleted all content types??

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

Error: The user does not exist or is not unique - when setting permission programmatically

Hi,
I am custom Sequential workflow in which I am breaking the permission and setting permission to list item.
I have used the below code for setting Permission:
SPRoleDefinition oSPRoleDefinition = oSPWeb.RoleDefinitions["RoleName"];
//Grant permission to Manager
SPRoleAssignment oSPRoleAssignmentManager = new SPRoleAssignment(strManagerLanID, strManagerEmail, "", "");
oSPRoleAssignmentManager.RoleDefinitionBindings.Add(oSPRoleDefinition);
CurrentListItem.RoleAssignments.Add(oSPRoleAssignmentManager);
I am getting the error as :
Error: The user does not exist or is not unique.
How to fix this?
Thanks

I think you misunderstood the solution proposed by frederic, what he is suggesting is that the error doesn't come from your code but from the user account
have you tried with another account ? (maybe the one you are using to log to your environment)
With this information, it will help us to know if the problem comes from your code or from the user account
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Really? Again? "The user does not have sufficient privileges to install Adobe Flash Player"

My browser is firefox.
"The user does not have sufficient privileges to install Adobe Flash Player" is the incessant problem I've had many times updating Flash.
Come on guys, this is getting beyond ridiculous. The install always stops at 55% exactly, and never completes, leaving me to abandon Firefox for Chrome. I mucked about the last half a dozen times this happened during the update and just by sheer accident it managed to install, but it's been 2 hours of similar mucking about and I'm now getting nowhere.
This has been a persistent problem and affected many firefox users for years now, as I've seen both by my own experience and by searching google. Isn't there a way you all can provide a single SIMPLIFIED solution to this issue, either by coordinating with firefox or by providing a Firefox "unique" installer? Really it's too infuriating.
Anyway, before anyone asks, yes I'm logged on as the admin, and yes I've run the installer "as the admin" by right clicking. I've also gone ahead and completely uninstalled flash (and emptied the folders as requested in other threads here) and reinstalled, only to watch the progress bar halt at 55% as per usual and leave me clicking that stupid Chrome icon to have a working flash program.
Honestly folks, why, after years, does this continue to be a persistent issue? Fix it for the love of God! Are you lot the guys doing the ObamaCare website or what? We firefox folks are loyal to our browser, and installing new versions of flash on this browser is an unnecessary bloody pain in the you know what.
Sorry for the visible frustration, but if someone could please provide a universal working solution I wouldn't need to be on here whinging and moaning.

I have had the same problem, but found that doing it this way, eradicated the issue for me-
I am no computer expert and have experimented over time until i found what has worked for myself.
I hope this helps others to resolve this problem.
                                            If you are unsure, then please get somebody that has an idea what they are doing to prevent any accidental deletion of system files!!!!!!!
This is a Microsoft windows 7 PC, not Apple Mac.
slightly lengthy, but has stopped me pulling hairs out and stopped swearing at the computer.
Allowed for me to open e learning that needed adobe to continue with learning.
Firstly:
Download the current uninstallerUninstaller for Windows
Close all browser windows and run the uninstaller
Restart Windows.
Delete all remaining files and folders located in the following directories. (these directories are probably hidden away from sight)
    (tip: copy and paste ONE of these paths into the path/search bar in an Explorer window)
C:\Windows\system32\Macromed\Flash
C:\Windows\SysWOW64\Macromed\Flash (if you are using a 64-bit system)
which should then display a white page with a top line in bold letters saying something like:-
"Index of C:\Windows\system32\Macromed\Flash\" as shown below:
This INFORMATION is only needed for the location as to where these files are hidden so DO NOT !!!!! click on any of the folders within this browser, as they will download into the download folder and cause more problems.
THIS WILL SHOW WHERE THE FOLDERS ARE HIDING WITHIN THE COMPUTER ITSELF, BUT THEY ARE PROBABLY HIDDEN, UNTIL YOU UNHIDE THE FOLDER(S) THAT YOU NEED.
MINIMIZE THIS SCREEN TO ONE HALF OF THE SCREEN, AND HAVE THE FOLDER OF THE COMPUTER ON THE OTHER SIDE OF THE SCREEN, SO THAT YOU CAN FOLLOW WITHOUT HAVING TO REMEMBER WHAT IS NEEDED TO BE DONE NEXT
Secondly:
Go onto DESKTOP
double click on computer
then double click on "C"
go to organize on top left corner under backwards arrow,
click on "folder and search options"
click on "view" tab,
look for heading "Hidden files and folders"
click on "show hidden files, folders, and drives"
click "Apply"
CLICK "OK"
Most folders will be a bright yellow folder, whereas the hidden folders that you have now made reappear will be a shaded yellow.
You should still have the operating system IDE (C) folder open.
Thirdly:
Look for:
Open folder "Windows"
Open Folder "System32"
Find Folder "Macromed"
Right Click on folder and look down for "Delete" left click which will then put the folder into the waste basket on the computer.
Empty the wastebin if it is on desktop by right clicking and choosing "Empty Recycle Bin"
close all explorer/Google pages.
then repeat the process as near top of page from Computer --> C Drive --> all the way to
Hidden files and folders
Forthly:
THEN !!!!!
click on "DON'T show hidden files, folders, or drives"
click "apply"
click "OK"
                                   THAT WILL HIDE THE SYSTEM FOLDERS
Fifthly:
CLOSE ANY FOLDER OR BROWSER ON THE COMPUTER SO THAT YOU ARE BACK TO THE DESKTOP.
FINALLY:
OPEN BROWSER
YOU SHOULD THEN BE ALLOWED TO INSTALL ADOBE WHEN OPENING A FRESH BROWSER

I cannot start bridge (Mac 10.8.2) CS6. States "the operation could not be completed"

I cannot start bridge (Mac 10.8.2) CS6. States "the operation could not be completed" but if I use another user account it works fine. I have uninstalled and re-installed Creative Suite but no differene.
Are there some logs or cache's that I need to delete or something??
Please help

but if I use another user account it works fine. I have uninstalled and re-installed Creative Suite but no differene.
Are there some logs or cache's that I need to delete or something??
There are a few things to try but it means the problem is in the account itself. un- and reinstall the Suite will not help if you are not also using the Adobe cleaner tool for this job:
http://www.adobe.com/support/contact/cscleanertool.html
Check this and read the instructions carefully and most important, have a back up of your important settings (in Photoshop your custom actions, tool presets, brushes and workspaces and for Bridge the custom output templates and keyword list, to name the most important for me).
If you check your user library (by default hidden per OSX 10.7, use menu Go and press option to reveal this library) Inhere is a folder called Application support and most of those settings are here - User/Library/Application Support/Adobe.
If you copy this folder to a back up location you can always use this to copy the certain wanted parts to the new installed folder.
Also use a check and repair permissions on your start up disk with Apple disk utility or third party software like Cocktail.
And finally since your still on 10.8.2 they just recently released 10.8.3
Usually the update procedure is using the App Store and check software update. BUt in this case it might be useful to find the 10.8.3 Combo Update on the Apple Support section.
You have to download this yourself and then it is a normal update procedure. The combo update does a bit more refreshing for the user account then the normal update.
And if all this is not helping you then you can use the Apple recovery disk to reinstall your system, this is what before was known as an Archive and Install procedure. This creates a new user library while all your custom settings and files are being kept.
But you have to find info for yourself for this and also make sure you have a proper back up of all your important files, but as a wise person you already had done so I believe ?

Error statement - "the disk was not ejected properly."

Error statement - "the disk was not ejected properly." I have my back disk pluged into my computer and when goes to sleep at night it gives me this error, how can I fix it.

I've been following this issue for a long time on one of the other Apple forum discussions. A suggestion was made to install an app called Jettison (by St. Clair Software). Since doing this two days ago, I have not seen the infamous "improper ejection" error message. Jettison seems to do, automatically without any effort on my part, exactly what the developer says: "Jettison eliminates the hassle of manually ejecting external drives before you put your MacBook to sleep and remounting them when it wakes."
By automatically unmounting my two external USB drives when the computer goes to sleep, Jettison is eliminating the opportunity for Apple's faulty USB power management system to improperly eject my external drives. As soon as my computer wakes up, Jettison quickly remounts the external drives. And, most importantly, Jettison has NOT caused any conflict with my Time Machine backups or my SuperDuper clone backups (three of which are scheduled to run automatically at 1:00am every night.
See: <http://stclairsoft.com/Jettison/index.html>

Getting error The user could not be registered at this time due to an internal error in R11

We created new Organization (that had alpha numeric value e.g. 7777A) using Customer Online to be used in iStore i11 version.
The user account and password was also created for the organization. When we tried to login to istore the first time the registration screen (jtftmplh.jsp) was displayed. After filling the needed information and submitting we get the error:
"The user could not be registered at this time due to an internal error Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error."
But if we created new Organization with numbers only e.g. 7777 we don't have the issue. Yet we already have large number of organization with alpha numeric and they work fine. (believe they were pragmatically loaded).
The profiles "HZ: Generate Party Number" and "HZ: Generate Party Site Number" are set to Yes.
==> Here is the error in the page source:
Message: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
Stack:
oracle.apps.jtf.base.resources.FrameworkException: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
    at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:406)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:3961)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:3870)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._jtftmplh._jspService(_jtftmplh.java:2342)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
    at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
    at _oa__html._ibeCRgpBusinessCreate._jspService(_ibeCRgpBusinessCreate.java:1467)
    at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
    at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
    at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
    at oracle.jsp.JspServlet.internalService(JspServlet.java)
    at oracle.jsp.JspServlet.service(JspServlet.java)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
    at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
    at org.apache.jserv.JServConnection.run(JServConnection.java:294)
    at java.lang.Thread.run(Thread.java:680)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: IBE_ERR_UM_REG_USER
    at oracle.apps.ibe.um.RegisterBusiness.handle(RegisterBusiness.java:1157)
    at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:379)
    ... 37 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException
    at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
    at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
    at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
    ... 39 more
The error message is not helpful and not clear of the error. How can we register users with alpha-numeric value (if that is the issue?).
Thanks for your assistance.

Been like this for a couple of days. Is this something that happens from time to time?

Restrict the user should not allow to select No Excise entry tab in MIGO

Hi
how to restrict the user should not allow to select No Excise entry tab in MIGO
if the material Excisable user can bale to select the No Excise entry tab in MIGO . my requirement .... if the Pop come Please enter Excise Invoice number and Excise Invoice Date user should not change the No Excise how to restrict pls advise me
@sakhi

These are the options provided by SAP keeping in mind Indian Scenario. Sometimes, vendor forget to send excise invoice copy with the material, in such case, you can select 'Only Part I'.
Even if you have maintain vendor excise details & material excise details (By mistake) in J1ID, system will throw an error message, excise invoice value is zero. In such case, we can select option 'No excise entry'.
Your requirement can't be fulfilled in standard way. Even if you go for any Z- developement, you will lose the option.

Hr_maintain_masterdata showing an infotype that the user does not have auth

subject: hr_maintain_masterdata showing an infotype that the user does not have authorisation for
Hi all,
I've a user account that's meant to perform staffing, based on the actual HR role. The system is also set up with an infogroup that contains infotypes 0000, 0001, 0006, 0185, XYZ and other infotypes; XYZ representing an actual infotype. The HR role is not supposed to have this infotype XYZ.
When PA40 is used, infotype XYZ will be skipped, as the user account do not have authorisation for it. I could then proceed to create the record.
When the fm: hr_maintain_masterdata is used, I was prompted that I do not have authorisation for infotype XYZ.
I have setup my fm with the mininum amount of values, as indicated below.
I did not populate a table for "proposed_values" so the infotypes called were due to the actions of the infogroup.
fm: hr_maintain_masterdata
pernr = 01234567
massn = 01          (new staff)
actio = INS          (insert record)
tclas = A          (master record)
begda = 01.09.2010
endda = 31.12.9999
werks = myCompanyPlant
dialog_mode = 2     (online)
luw_mode = 1          (commit, if no errors encountered)
no_existance_check = X
Q. Is there any way to let the function module call the infotypes, with authorisation checks, as what PA40 is doing?
Your guidance would be appreciated.
Thank you,
James Wong

A behaviour that has been observed was that, after infotype 0185 was saved, the function module throws me back to infotype 0000, citing, "No authorization to maintain XYZ exists". Data that I had populated to the screen, either via the FM or by manual input were cleared. If I skip the next 4 screens, I'll arrive at the Infotype after XYZ, with the data populated. Subsequent infotypes also have their data filled in.
Once I complete the sequence, the personnel record will be created. Upon examination, the frist 4 screens that were skipped in the 2nd pass contains data that were entered in the 1st pass.
My question, as posted in the original post, is why infotype XYZ is triggered by the function module, as the staffing account does not hae access for it. If I repeat the process using PA40, the infotype is skipped accordingly.
Any help would be appreciated.
Thank you,
James Wong,

Config manager client deployment script states the user is not a local admin

Similar Messages

Maybe you are looking for