Config profile for AppleTV

Hi all,
I have a dozen or so Apple TV's I'm rolling out for our school, and they need configuring with a profile to attach them to our wifi network. I've run into a wall though - I need to give the profile a certificate, but I can't figure out how to add the certificate to the profile, or make it available. It is the highlighted section in the attached pic....
Where do I put the certificate?
Which certificate should I use?
How do I make this menu actually available? (It is greyed out at the moment).
Cheers,
James

If you scroll down in the left pane there is a certificate payload as well. You need to add them into that payload, then they will be an option for your certificates.

Similar Messages

JSPM: Error while detecting start profile for instance with ID _c.

Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AM

Hi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu

MMS not working in iPhone4S when installing config profile with APN

When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This means we could not send or receive MMS messages. And this is MMS going over the MMS protocol (and not iMessage). We had not seen this before. We routinely do config profiles with APN info and have done for all iPhone models and iOS version before the new iPhone4S. Never had a problem with MMS or anything else. This is for iPhone4S devices in the AT&T network. It is easy to reproduce and you don't need an enterprise APN for that. In fact just a config profile with AT&T's APN settings will still break MMS when installed (other than the MMS, everything else works fine).
It does not appear an iOS 5 issue. iPhone4 (or iPhone3GS) with iOS 5 do not have this problem. It appears to be tied to the new iPhone4S hardware. The same configuration profile (with the APN info) works fine on iPhone4 with iOS 5 (MMS works fine), but when you put the very same configuration profile to an iPhone4S, MMS quits working.
Doing a network reset does not solve the problem. Only removing the profile fixes the MMS
Any ideas, explanations or workarounds?

I called the Apple care line, and eventually got to 4th tier support, where they declared that there must be an issue with the APN I'm using, regardless of the fact that none of the iPhone 3G, 3GS', and 4's in our office are experiencing this issue while using the same APN. I guess I shouldn't be surprised about this, afterall who'd expect Apple to actually admit there's a "bug" in one of their products, especially since this is hapenning to a very small number of users on the 4S. Getting to 4th tier support was free, but to be able to talk to someone who can actually investigate this issue will cost $700.
I offered to give them access to our private APN for testing, but they were "unable to do that sort of testing". Additionally, we have tested using a public APN from AT&T (wap.cingular), and still experience the same issue.
Lastly, I did some further digging, and I think it has something to do with PDP Context 2 not getting an IP address. As a disclaimer, I have no clue what a PDP Context is, what it does, what it's for, but obviously MMS needs it. Going into field test mode on the phone will allow you to see the PDP Contexts, and is where I got this info from.
On the iPhone 4S, without an APN profile installed, the PDP Contexts are listed 0-3. These 4 contexts have values for an APN, and an IPv4 address, although context 0 and 2 are the only ones that have values in them.
When an APN profile isnt installed, MMS' can be sent, cellular internet doesn't work., the values are:
Context 0
IPv4:    ip is blank
APN:   phone (this is the default APN for the iphone 4s on att).
Context 2
IPv4:     has a valid public IP address
APN:     wap.cingular
When an APN profile is installed, MMS's can't be sent, but cellular internet does work, the values are:
Context 0:
IPv4:     Valid public IP address is present
APN:     Our enterprise APN
Context 2:
IPv4:     ip is blank.
APN:     wap.cingular
It appears that when Context 2 has an IP address, MMS' are able to be sent. One other interesting fact, on the iPhone 4, only 1 PDP Context is listed, while the 4S has 4 listed.
Hopefully this issue will be resolved in the 5.1 update, as this update contains a baseband update for the 4S, updating it from 1.0.14 to 1.2.01-1. Unfortunately I don't have access to a 5.1 beta, otherwise I'd test this my self. If anyone has access to the beta, and wants to test APN profiles/MMS send status, we'd greatly appreciate it!

Need the instance profile for a java dialog instance

Hi!
Please help provide the instance profile for a java dialog instance (java only).
Thanks a lot!

SAPSYSTEMNAME = <SID>
INSTANCE_NAME = <INSTANCE_NAME>
SAPSYSTEM = <INST_NUMBER OF JAVA INSTANCE>
DIR_GLOBAL = <DRIVE>:\usr\sap\<SID>\SYS\global
DIR_PROFILE = <DRIVE>:\usr\sap\<SID>\SYS\profile
DIR_EXECUTABLE = <DRIVE>:\usr\sap\<SID>\<INSTANCE_NAME>\exe
SAPGLOBALHOST = <NAME OF THE SERVER>
DIR_CT_RUN = C:\usr\sap\J2E\SYS\exe\run
enque/process_location = REMOTESA
enque/serverhost = <NAME OF THE SERVER>
enque/serverinst = <SYSTEM NO. OF SCS>
enque/encni/port = 3200+enque/serverinst
jstartup/trimming_properties = off
jstartup/protocol = on
exe/jlaunch = $(DIR_INSTANCE)/j2ee/os_libs/jlaunch.exe
jstartup/vm/home = <DRIVE>:\j2sdk1.4.2_12
INSTANCE_PROPERTIES = $(DIR_INSTANCE)/j2ee/cluster/instance.properties
SDM_PROPERTIES = $(DIR_INSTANCE)/SDM/program/config/sdm_jstartup.properties
jstartup/instance_properties = $(INSTANCE_PROPERTIES);$(SDM_PROPERTIES)

Maintenance of serial number profile for a material

Hi,
We need to maintain serial number profile for a material. Presently there exists stock for this material.
Could you please let us know the prerequisites for maintaining the serial number profile for a material where stock exists.
System should not allow to update the material with serial number profile if stock exists, since for the existing stock serial numbers are not available. But in our case, system is allowing to update the profile for the material where stock exists. Could you suggest if any setting/config is missing to throw an error.
Regards,
Srinivas

I have the solution below.
- Don't change Serial no. profile
- Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
- Change Serial no. profile in material master
- Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
Hope this solution can help you.
Edited by: Saiyaman on Dec 9, 2009 5:33 PM

Profile for CAT2 Tcode

HI all,
How to create Profile for CAT2 Tcode.
when we execute the CAT2 tcode, we have a field Data Entry Profile.
if we select F4 option for that it will display list of Profile..
i want to create a new profile..
how can we create

Hi,
Follow this steps without back end config may be your issue may resolve partially?
Step 1: Use transaction code CAC1 to create the Data entry profile
Step 2: To Control the time sheet entry screen with Data entry profile use transaction code CAC2 .
Step 3: Posting time sheet document with transaction code CAT2
Step 4: Transfer working hours cost to Internal order with transaction code CATA
Thanks
Vibin

Profile for Client Copy

Hi all,
I have to do a local client copy but i am confused as to what profile to be used. we have two clients 200 & 210 with master data in both. now we want to overwrite 200 client with the config, user-profiles and all but no master data of 210 so that 200 will be cleaned as far as Master data is concerned and we can upload new Master data. but it shouldn't be overwritten by 20 Master data. Can you please help me with what profile to use? Is SAP_UCUS ok? or do i need to choose some other profile?
Thanks & Regards,
Priya

Hi Priya,
Taking into account that:
Application Data = Master Data + Transaction Data
And that you can not copy Application data without transaction data using client copy, maybe you can to either create a production client (SCCL) or take a export of client (SCC8) before creating transaction data .You can
either use SAP_ALL or SAP_APPL profile for this. See the notes 24853 and 19574 about it..
Nevertheless, It seems to me you want to copy customizing but not application data so best option is probably SAP_CUST.
SAP_CUST
Client-dependent Customizing, including authorization profiles, are
copied. The application data is deleted and the user data is retained.
User Data -> NO
Customizing -> YES
Application Data -> No (deleted)
SAP_UCUS
Corresponds to SAP_CUST with user master data.
User Data -> YES
Customizing -> YES
Application Data -> No (deleted)\
Br,
Javier

Lens Profile for Ricoh GRIII

I created my first profile, it's for the Ricoh GRDIII. Lightroom users can find it at http://rapidshare.com/files/410020877/G ... W.lcp.html
I have taken sets at 30cm and 150 cm, both at F/1.9 and f/4.0 I haven't gone beyond f/4.0 as I normally don't use the GRIII beyond this aperture. It's my first profile, so if you try it out and see something is incorrect, please let me know.
Good luck,
Tom

Nope, the settings has config info. The downloaded profiles for ACR6.1 are located at the first path, and are the same as for CS5 lens correction. I followed this process for both my 16-85VR and 55-200VR profiles, later deleted them, and then re-downloaded in an attempt to figure out the vignetting problem. I did not see a 18-105 profile listed.
Richard Southworth
P.S. I'm also running W7 64.

Lens Profile for Nikon Coolpix P330

Hi,
I see that lens profile is available for P330 from the release notes of ACR 8.1 beta. Is there a way to obtain/add that lens profile to LR 4.4? I don't have any CS6 products and so cannot try and install ACR 8.1 Beta myself.
Thanks!
Devendra

Nope, the settings has config info. The downloaded profiles for ACR6.1 are located at the first path, and are the same as for CS5 lens correction. I followed this process for both my 16-85VR and 55-200VR profiles, later deleted them, and then re-downloaded in an attempt to figure out the vignetting problem. I did not see a 18-105 profile listed.
Richard Southworth
P.S. I'm also running W7 64.

Interface design in config profile

Hi
After creation of interface design in config profile and I have assigned new tab in cu50 .
But after I have created one sale order , then I removed interface design object from config profile again I maintained same as like before .
But once I changed interface design even though I maintain again which is not updating as like before.
Can you tell me wt should I do for the same?
Regards
Ishikesh

pls close this issue

Adobe Standard profile for 5D mark II includes tone curve?

In ACR, I see a "Point" tone curve with the "Adobe Standard" profile on Canon 5d Mark II files.
I've never seen a tone curve before on standard profiles for other cameras. I understand that tone curves are included in the camera standard, faithful, portrait and landscape profiles in attempt to match the in-camera jpegs. But I thought the Adobe Standard profiles were supposed to target only color (hue/sat) and leave tone up to the user.
Can someone verify that your system includes a point tone curve on 5D2 raws. Maybe my config is messed up.

Dear Eric,
I have Photoshop/Bridge CS3 and Camera Raw Version 4.5.0.175 on Windows XP (SP2).
To "see" tone curves I launch Bridge, navigate to a folder, double-click a raw or DNG file and get the ACR window.
In the ACR window, I click on the "Camera Calibration" tab and navigate through the various Camera Profiles.
For each profile, I click on the "Tone Curve" tab and view both the "Parametric" and "Point" curves.
For canon 5D Mark II DNG files there is always a "Medium Contrast" Point Curve, under every camera profile. I do not have a Canon 1Ds Mark III, but I have downloaded a sample raw file and converted it to DNG. For this DNG I also see a Medium Contrast Point Curve under every profile.
For my Canon 20D and Canon 1Ds raw or DNG files the Point and Parametric curves are flat under every camera profile.
When I downloaded the latest DNG converter and DNG Profile Editor, I'm reasonably confident I also downloaded and installed the most current camera profiles.
For Canon 5D2 files I see the following profiles: Adobe Standard, Camera Faithful, Camera Landscape, Camera Neutral, Camera Portrait, and Camera Standard, in that order.
For the Canon 1DS Mark III image I see all those profiles, plus ACR 4.4 and ACR 4.3
For Canon 20D files I see all those profiles, plus ACR 4.4 and ACR 2.4
To make sure I'm not picking up any presets, I have invoked the pop-up menu in ACR and selected "Reset Camera Raw Defaults". Then, for each file viewed in ACR I checked the pop-up menu again to make sure "Camera Raw Defaults" was checked.
And a reminder, all this was after I had created a number of custom profiles from Macbeth Color Checker images using the DNG Profile Editor. Those custom profiles created a problem with Bridge previews, so I removed all of them before viewing Point Curves as described above. Still hoping to get some feedback on the Bridge preview problem I described in this message:
http://www.adobeforums.com/webx/.3bb6a869.59b790c8

Lens profile for Nikon 18-105 1:3.5-5.6 urgently needed

Does anyone have lens profile for Nikon 18-105 1:3.5-5.6. Currently I don't have that lens, so I'm unable to create a profile on my own. Any help will be appreciated.

Nope, the settings has config info. The downloaded profiles for ACR6.1 are located at the first path, and are the same as for CS5 lens correction. I followed this process for both my 16-85VR and 55-200VR profiles, later deleted them, and then re-downloaded in an attempt to figure out the vignetting problem. I did not see a 18-105 profile listed.
Richard Southworth
P.S. I'm also running W7 64.

Apple configurator and ios 6.1 cannot install config profile

I'm using the Apple Configurator v1.2.1 to install my enterprise app into iPad 2's. First of all, I am unable to upgrade from iOS 6.0.1 to 6.1.2. It either fails or gets stuck and I have to "stop". My work around is to upgrade via the device (which is actually pretty fast). My big problem is that I am also installing provisioning and configuration profiles, which include files for the app. Every things seems to go ok, the app and all the data installs properly, so does the profisioning profile, until the end where the configurator tells me to "tap device to install profile" but the profile prompt never appears on the iPad. The iPad goes into setup as if it's a new iPad and the config profile nevers gets installed. I do get a warning saying it can't install the profile. I'm forced to update the configuration manually. I'm updating about a dozen each time, so it's starting to get tedious as well as error-prone. Any ideas would be greatly appreciated.

Use whatever method you wish to update iOS
Go though,the setup as needed
Then try apple Configurator to install your profiles
From memory updating iOS with apple Configurator
Causes the setup to run like a new device the same if you used iTunes to update
As the complete OS is installed
However it will only download iOS once, providing all your devices are the same
Updating iOS on the device still has a setup but it's only for iCloud
And you'd have to download the (smaller) update each time
I would think it is the iOS update and setup that's causing your profiles etc
to fail there maybe to much going on at the same time

Generate a xml config file for SPA3102

Hi everyone,
I'm trying to create a xml config file for my SPA3102
I tried http://<phone -or- device ip address>/admin/spacfg.xml
to generate the xml but i had a 404 Not Found !
web page so i'm searching a solution to generate a config file from the existing configuration
I don't want to generate 2 html files for voice and router
can you help me ?

Basically, XML config file for this SPA3102 can be generated using SPC tool software (Profile
compiler). However, I think this tool is only available from your Value Added Reseller or from your VoIP.Thanks.

Does any one know how to switch iPhone config profiles remotely ?

I want to send my iPhone's location to the server, and based on the location of the device. I want to switch the device's config profile.
Does any one know how to do it ?

As I understand it, first, there is no way to incrementally update a profile, you must remove one then add another. I've found you can in some situations have multiple profiles on a device, but they can't have conflicting settings. If the profile is unencrypted, you can do it fairly easily with an email attachment or hyperlink. There is info on this in the enterprise deployment guide for IOS devices. If it is an encrypted profile, the only way we have found to make it reliably work is with a USB connection to the IOS device.

Config profile for AppleTV

Similar Messages

Maybe you are looking for