Config Reader for v880

Hello,
I'm installing a SUNMC agent onto a v880 and do not have the option to install the ELP config reader during the install. I have used the same install package to install to some V440s and V240s and those worked just fine.
Any Ideas?

The v880 uses the HighEnd Workgroup Server config-reader.

Similar Messages

Generic Config reader X86 for Sun Mc 4.0

Hi
What down mean this note for Generic Config reader X86 , and how can I enable it
Note - Only machines with service controllers enabled can display these six new modules. In the absence of a service controller or when the service controller does not support the IPMI tool, the x86 Config Reader will revert to the older output version in the Sun MC 3.6.1 release.
is the service on the client side ?
Thanks

Hi Pegah Garous,
As per http://forums.halcyoninc.com/showthread.php?t=115, I started debugging yesterday and here are the details.
1. I have found menu containing only copy, no vmstat when on right click on module browser ==> Kernel reader ==> CPU statistics.
2. On investigating the logs, i found following in */tmp/probeserver.stderr* file
INFO: Connected to database
cancel timeout
clntEvDispatch: failed to find rtyp key, status (-2021)
eventmgr exiting ...
INFO: Dis-Connected from database
Rest of all log files in /var/opt/SUNWsymon/log seems perfect without any error.
3. I don't have probe settings in agent's /var/opt/SUNWsymon/cfg/domain-config.x file. Do i have to add one to get this vmstat? Can I just add the port settings and restart agent? If I add in agent, do I have to add in server's /var/opt/SUNWsymon/cfg/domain-config.x file also? Because even i want to collect data from agent running on server machine.
4. Regarding how to use it, I have followed all these steps exactly and at the end i found nothing in "Data Availability"
5. I have also checked the steps in http://forums.halcyoninc.com/showthread.php?t=2 and http://forums.halcyoninc.com/showthread.php?t=33. Nothing seems to be working.
Thanks,
Thiru
http://perfhints.blogspot.com/

How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

hi,
I beleive your question has been answered in a different post
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
hope this helps
Russ@HP
Say thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
(Although I am employed by HP, I am speaking for myself and not for HP)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

No data read for fiscal year 2011

In ECC6, after posting document in FI, I wan to check balances with T-Code FS10N and Enter GL account in which document entry supposed to be recorded. But when I execute it getting message in Information window " NO data read for fiscal year 2011 (Long text)
what does it mean? Appreciated explanation

I did saved the entry and then got message, when I was trying to display document no?
error message "document no 200000003 sony does not exists in fiscal year 2011"
when I was trying to see display of GL account
Got message " NO data read for fiscal year 2011"
when I was trying to make document reversal of document no: 200000003
Got message "document no 200000003 sony does not exists in fiscal year 2011"
My document type is SA and reversal document type is Ab, No. range for this document is in fiscal year 2011.
I really confused where is my config. went wrong?
suggestion and expert opinion are expected and appreciated.

[svn:bz-trunk] 20873: Update description of class deserialization validators functionality in example services-config .xml for BlazeDS/trunk.

Revision: 20873
Revision: 20873
Author:   [email protected]
Date:     2011-03-16 06:35:10 -0700 (Wed, 16 Mar 2011)
Log Message:
Update description of class deserialization validators functionality in example services-config.xml for BlazeDS/trunk.
Checkintests: Not run. No code changes.
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

Thanks Carlo for your reply.
I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option.

Config settings for AP, AR from SD and MM prospect?.

Hello Guru's,
Will anyone share your expertise, what are the config settings for AP and AR from SD, MM point of view and what are the Integration points for AP and AR with FICO.

You may check the links to understand the link between SD and FI.
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=33768
http://www.sapscene.com/sapscene/accassg.html
http://www.sap-img.com/financial/fico-interview-questions.htm
http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
http://sap-img.com/financial/integration-of-fico-with-other-modules.htm
Regards,
GSL.

Iphone config utility for Mac OS 10.5

Is there an iphone config utility for Mac OS 10.5?

Problem: Just got a new IMAC with System 10.5.4, now my Cisco VPN doesn't work. I had my files professionally transferred, vpn worked on my other IMAC, now it doesn't (Error 51). I downloaded vpnclient-darwin-4.9.01.0100-universal-k9.dmg, this version didn't work either (Error 51).
I have tried everything from repairing permissions to entering code in my terminal and still get the error. Any solutions to this frustrating problem? I have spent hours looking for solutions and rely on my VPN for work, so I need help fast!
Thanks to anyone with advice.

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

Config Reader on E250?

Have installed the SunMC agent on two E250's and cannot get a common config reader to load on either - it does not even show as an option. This appears to leave me without the ability to monitor hardware on these platforms.
Will I get hardware alerts in this situation? Is there something I am simply missing or doing wrong? I do get MIB-II and Kernel Reader (both simple) and other aspects of SunMC appear fine.
Note, am using just the base management capabilities of SunMC.
Thanks in advance.

Have installed the SunMC agent on two E250's and
cannot get a common config reader to load on either -
it does not even show as an option.I think the E250 is covered by the Workgroup Server, and the Sun FIre V250 is covered by the Common Config Reader... but it's been awhile since I checked.
If you have the proper Config Reader specified when es-inst is run, then es-setup should have automatically loaded it for you when the Agent was first started.
Will I get hardware alerts in this situation? Is
there something I am simply missing or doing wrong? Without a Config Reader module loaded you aren't doing any hardware monitoring. Try re-running es-inst and choosing the Workgroup Server option (I think it's last on the list), then let it rerun es-setup.
Regards,
Mike Kirk

How can I install and config Jolt for IIS so that I can call the services advertised by tuxedo?

How can I install and config Jolt for IIS so that I can call the services advertised
by tuxedo?

It appears that you have apps that need updating that were pruchased from more than one account
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

[svn:bz-trunk] 18928: fixing the sample service-config. xml for max-object-nest-level setting

Revision: 18928
Revision: 18928
Author:   [email protected]
Date:     2010-12-01 14:16:56 -0800 (Wed, 01 Dec 2010)
Log Message:
fixing the sample service-config.xml for max-object-nest-level setting
Modified Paths:
    blazeds/trunk/resources/config/services-config.xml

you have your driver jar in Tomcat\common\lib?
if so, check your classpath, it could be that.

[svn:osmf:] 13604: Update build-config files for sample plugins.

Revision: 13604
Revision: 13604
Author:   [email protected]
Date:     2010-01-18 17:09:32 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for sample plugins.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/apps/samples/plugins/MASTSample/MASTSample-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

[svn:osmf:] 13606: Update build-config files for framework projects.

Revision: 13606
Revision: 13606
Author:   [email protected]
Date:     2010-01-18 17:20:00 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for framework projects.
Modified Paths:
    osmf/trunk/framework/OSMF/readme.txt
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTestHeadless.mxml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/OSMFTestHeadless.mxml
Added Paths:
    osmf/trunk/framework/OSMF/osmf-build-config.flex
    osmf/trunk/framework/OSMF/osmf-build-config.flexcov
    osmf/trunk/framework/OSMF/osmf-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/OSMFIntegrationTests.as
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.flex
    osmf/trunk/framework/OSMFTest/OSMFTest.flexcov
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml
Removed Paths:
    osmf/trunk/framework/OSMF/mediaframework-build-config.flex
    osmf/trunk/framework/OSMF/mediaframework-build-config.flexcov
    osmf/trunk/framework/OSMF/mediaframework-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/MediaFrameworkAirTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/mediaframeworkintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/MediaFrameworkIntegrationTests.as
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flex
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flex
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.xml
    osmf/trunk/framework/OSMFTest/org/osmf/MediaFrameworkTests.as

What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
Please send the .log to [email protected]

[svn:osmf:] 13605: Update build-config files for libs.

Revision: 13605
Revision: 13605
Author:   [email protected]
Date:     2010-01-18 17:10:01 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for libs.
Modified Paths:
    osmf/trunk/libs/VAST/vast-build-config.flex
    osmf/trunk/libs/VAST/vast-build-config.flexcov
    osmf/trunk/libs/VAST/vast-build-config.xml
    osmf/trunk/libs/adobe/NetMocker/netmocker-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

Config Reader for v880

Similar Messages

Maybe you are looking for