Config Reader on E250?

Have installed the SunMC agent on two E250's and cannot get a common config reader to load on either - it does not even show as an option. This appears to leave me without the ability to monitor hardware on these platforms.
Will I get hardware alerts in this situation? Is there something I am simply missing or doing wrong? I do get MIB-II and Kernel Reader (both simple) and other aspects of SunMC appear fine.
Note, am using just the base management capabilities of SunMC.
Thanks in advance.

Have installed the SunMC agent on two E250's and
cannot get a common config reader to load on either -
it does not even show as an option.I think the E250 is covered by the Workgroup Server, and the Sun FIre V250 is covered by the Common Config Reader... but it's been awhile since I checked.
If you have the proper Config Reader specified when es-inst is run, then es-setup should have automatically loaded it for you when the Agent was first started.
Will I get hardware alerts in this situation? Is
there something I am simply missing or doing wrong? Without a Config Reader module loaded you aren't doing any hardware monitoring. Try re-running es-inst and choosing the Workgroup Server option (I think it's last on the list), then let it rerun es-setup.
Regards,
Mike Kirk

Similar Messages

Generic Config reader X86 for Sun Mc 4.0

Hi
What down mean this note for Generic Config reader X86 , and how can I enable it
Note - Only machines with service controllers enabled can display these six new modules. In the absence of a service controller or when the service controller does not support the IPMI tool, the x86 Config Reader will revert to the older output version in the Sun MC 3.6.1 release.
is the service on the client side ?
Thanks

Hi Pegah Garous,
As per http://forums.halcyoninc.com/showthread.php?t=115, I started debugging yesterday and here are the details.
1. I have found menu containing only copy, no vmstat when on right click on module browser ==> Kernel reader ==> CPU statistics.
2. On investigating the logs, i found following in */tmp/probeserver.stderr* file
INFO: Connected to database
cancel timeout
clntEvDispatch: failed to find rtyp key, status (-2021)
eventmgr exiting ...
INFO: Dis-Connected from database
Rest of all log files in /var/opt/SUNWsymon/log seems perfect without any error.
3. I don't have probe settings in agent's /var/opt/SUNWsymon/cfg/domain-config.x file. Do i have to add one to get this vmstat? Can I just add the port settings and restart agent? If I add in agent, do I have to add in server's /var/opt/SUNWsymon/cfg/domain-config.x file also? Because even i want to collect data from agent running on server machine.
4. Regarding how to use it, I have followed all these steps exactly and at the end i found nothing in "Data Availability"
5. I have also checked the steps in http://forums.halcyoninc.com/showthread.php?t=2 and http://forums.halcyoninc.com/showthread.php?t=33. Nothing seems to be working.
Thanks,
Thiru
http://perfhints.blogspot.com/

SunMC 3.5.1 and Netra Config Reader

I have a single netra T1 10x system that when added to sunmc diplays a "Netra t Config Reader Module Status system: Data acquisition error"
Has anyone seen this? I need someone to point me in a direction to resolve this issue.

The problem was with the client code.
The installation was corrupted somehow and after removing from client and deleting entry from the server, both could be re-created cleanly and worked.

Config Reader for v880

Hello,
I'm installing a SUNMC agent onto a v880 and do not have the option to install the ELP config reader during the install. I have used the same install package to install to some V440s and V240s and those worked just fine.
Any Ideas?

The v880 uses the HighEnd Workgroup Server config-reader.

SunMC 3.5 u1(config reader) and SF25K

Hi!
Config Reader (Fin Fire 15K/12K) shows that the SF25K has no Slot0 boards
but actually it has 18 ones. All other parts are shown correctly. SBs has IV++ processors, SMS of the server is 1.5
Where is the problem? whether it's because of SMS version or CPU type?
What should be done in this situation?
Thanks in advance,
Veronika

If you're still seeing this, could you pls. clarify which Config Reader you're seeing this in?
The Platform Config Reader should show all System Boards, but the domain Config Reader will only show boards configured or available to that domain.
What's the configuration of boards/domains?
Also, what does the Platform/Domain State Management (PDSM) module show?
Regards,
-Sean

Config Reader/Kernel Reader Alarm Files

Where are the files located for your Alarm Action? We have several 72+ CPU machines and don't really feel like manually setting alarms via the gui. Can I edit a file?
Thanks

Hi lmd,
Where are the files located for your Alarm Action? We
have several 72+ CPU machines and don't really feel
like manually setting alarms via the gui. Can I edit
a file?SunMC's "Managed Jobs" feature (Tools --> Managed Jobs) lets you automate this type of thing 2 ways:
-a "Data Property" Task lets you set all those thresholds once on the Server, then you just pick what Agents to apply it to. And those tasks are stored so you can run them over and over
-a "Configuration" Task lets you set up one Agent the way you want and template it's configuration and save it on your SunMC Server. Then you can apply that template to other Agents.
Data Property tasks are good when you want to go tweak a few things on a lot of systems. Configuration tasks are better to grab the entire config of an Agent as a template or backup (i.e. you can make a "web server" template, and "Oracle" template etc and apply them as you need them).
If you really want to edit files, the thresholds you set are stored on the Agent in <module>.dat or <module>+<instance>.dat files in /var/opt/SUNWsymon/cfg. i.e. if you edit thresholds in the Kernel Reader module, they will be saved into kernel-reader.dat.
You can set your thresholds once, then copy the resulting file to another (stopped) Agent and start it up. The syntax of the file is simple, so you could also edit it and put in the thresholds you want.
Note: Configuration Tasks are actually moving files around under-the-hood just like you asked about (using the SunMC web server to store and retrieve them). Hint: after making a Configuration task go look in /var/opt/SUNWsymon/mcp on your SunMC Server... it will contain the relevent .dat files from the Agent you templated.
Regards,
[email protected]
http://www.HalcyonInc.com

Ssh with two or more private keys using ~/.ssh/config read the wrong private key

Hi,
I have created a config file in ~/.ssh/ to be able to connect to remote sites using different private keys per site.
The problem is when I try to connect to any of them ssh reads the wrong private key dispite of the configuration in ~/.ssh/config file.
For example:
Host vps
Hostname x.x.x.x
User guesswho
IdentityFile vps.pk
Host home
Hostname y.y.y.y
User home
IdentityFile home.pk
>ssh -v vps ( connects using home.pk)
>ssh -v -i ~/.ssh/vps.pk ( connects using home.pk)
I tried it on a Ubuntu 10.04.3 LTS using same config file and keys (openssh-server 1:5.3p1-3ubuntu7) and it worked as expected.
Any help would be appreciated.
zcookie

My question is do I have to create a separate private key from my imac or can I just copy the private key from my macbook?
Do you have to create separate private keys? No, but there are reasons why you might want to.
The biggest one is the fact that if any key is compromised, they are all compromised (since they are the same). Say, for example, your MacBook is lost or stolen. You really should consider disabling the MacBook's key from authorized_keys to prevent the finder/thief from getting into your server. If that one key is shared by multiple hosts, though, you're going to lock out all the other hosts as well, even though they haven't been affected.
Having separate keys per client lets you nix just the key for the MacBook (or whichever machine) without impacting the other machines' ability to connect.
Other than the trivial amount of work it takes to create a private key there's really no overhead in having unique keys per client machine. If, however, you really want them to be the same, knock yourself out

On excel sheet upload read the workbook and populate data to sharepoint list

Requirement in my current project:
In a document library when I upload an excel sheet, a specific workbook has to be read and the contents have to be uploaded to a sharepoint custom list.
The approach followed was create an event receiver and register as a feature. Following is the code for event receiver.
public override void ItemAdded(SPItemEventProperties properties)
            base.ItemAdded(properties);
            var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
            SPListItem doc = properties.ListItem;
            doc["Msg"] = "items deleted from req list";
            doc.Update();
            string excelname=doc.File.Name;
            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "calling read excel");
            string filepath = doc.File.Url.ToString();
            doc["Msg"] = "excel name" + excelname + filepath;
            doc.Update();
            readExcel(excelname,filepath);
        private static SPList getSPList(String SPListGuid)
           // SPSite Site = SPContext.Current.Site;
            SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD");
            SPWeb web = Site.OpenWeb();
            Guid listid = new Guid(SPListGuid);
            web.AllowUnsafeUpdates = true;
            SPList List = web.Lists[listid];
            return List;
        private void readExcel(string excelname,string filepath)
            try
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    using (SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD"))
                        SPWeb web = Site.OpenWeb();
                        string workbookpath = web.Url + "/" + filepath;
                        web.AllowUnsafeUpdates = true;
                        var _excelApp = new Microsoft.Office.Interop.Excel.Application();
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "iside read excel");
    //my code breaks or fails when cursor reaches this statement. I am not able to open the excel sheet, there is no    //problem related to the permission. same code snippet works in a console application. but when tried as an
event    //handler in sharepoint it breaks. can anyone help me to resolve the problem
                        workBook = _excelApp.Workbooks.Open(workbookpath, Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing,
Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing);
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "after excel open");
                            int numSheets = workBook.Sheets.Count;
                            // Iterate through the sheets. They are indexed starting at 1.
                            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", numSheets.ToString());
                            for (int sheetNum = 12; sheetNum < 13; sheetNum++)
                                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "inside first for
loop");
                                Worksheet sheet = (Microsoft.Office.Interop.Excel.Worksheet)workBook.Sheets[sheetNum];
                                Microsoft.Office.Interop.Excel.Range excelRange = sheet.get_Range("A13",
"P89") as Microsoft.Office.Interop.Excel.Range;
                                object[,] valueArray = (object[,])excelRange.get_Value(
                                    Microsoft.Office.Interop.Excel.XlRangeValueDataType.xlRangeValueDefault);
                                var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
                                for (int L = 1; L <= excelRange.Rows.Count; L++)
                                    string stringVal = valueArray[L, 1] as string;
                                    if ((valueArray[L, 1] != null) && (!string.IsNullOrEmpty(stringVal)))
                                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload",
"inside second for loop");
                                        SPListItemCollection
listItems = list.Items;
                                        SPListItem item = listItems.Add();
                                        item["Product"] = valueArray[L,
1];
                                        item["App"] = valueArray[L,
2];
                                        web.AllowUnsafeUpdates
= true;
                                        item.Update();
                            web.AllowUnsafeUpdates = false;
                            //Or Another Method with valueArray Object like "ProcessObjects(valueArray);"
                            _excelApp.Workbooks.Close();
                //workBook.Close(false, excelname, null);
                //Marshal.ReleaseComObject(workBook);
            catch (Exception e)
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", e.Message.ToString());
            finally
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "finally block");
Is this the only approach to meet this requirement or is there any other way to crack it. sharepoint techies please help me.

as you described the scenario of the event that it should happen when user upload excel to a document library. Event Receiver is your best bet. However if you would have a requirement that users can send excel files any time to a network file location and
you want to pick it, read it and create list items etc. You would write a sharepoint timer job that would run every 10 minute to check for file and if available on the network drive, perform the operation etc. so that users who send excel file does not need
to come to the sharepoint etc. You can see that you have Event Receivcer option or Timer job option OR you would write a console application to trigger the code at a scheduled time on sharepoint server etc. so you are using the event receiver in the correct
scenario.
Moonis Tahir MVP, MCPD, MCSD.net, MCTS BizTalk 2006/SQL 2005/SharePoint Server 2007 (Dev & Config)

Problem w.r.t. JSF 2.0 with faces-config.xml

Hi All,
I am trying to evaluate the features of JSF2.0.
For that, I have created a very simple application with "JSF 2.0.2".
There is a page that displays a composite component and some other form related components (inputtext, commandbutton).
When I deploy my application without any faces-config.xml file, everything renders perfectly fine.
When I deploy the app with faces-config.xml (even an empty one without any configuration), none of the components get rendered.
Only the html elements get displayed.
I need to define some navigation-rules in my config file. I am not sure how to go further from here.
The app server I am using for deploying my app is GlassFish(v3).
Any help or pointers towards solving my problem are highly appreciated.
You can find the xhtml file, etc of my project below.
Thank you,
With best regards,
Praveen
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5">
     <context-param>
          <param-name>javax.faces.DEFAULT_SUFFIX</param-name>
          <param-value>.xhtml</param-value>
     </context-param>
     <servlet>
          <servlet-name>Faces Servlet</servlet-name>
          <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
</web-app>
faces-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN" "http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
</faces-config>
resources->acicomp->namesection.xhtml
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:ui="http://java.sun.com/jsf/facelets"
      xmlns:f="http://java.sun.com/jsf/core"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:composite="http://java.sun.com/jsf/composite">
<composite:interface>
</composite:interface>
<composite:implementation>
     <h:panelGroup>
     <h:panelGrid columns="2">
          <h:outputText value="Name: "/>
          <h:inputText value="myName"/>
          <h:outputText value="Company: "/>
          <h:inputText value="myComp"/>
     </h:panelGrid>
     </h:panelGroup>
</composite:implementation>
</html>
index.xhtml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:aci="http://java.sun.com/jsf/composite/acicomp">
<h:head>
     <title>JSF Test Program</title>
</h:head>
<h:body>
     <p>My Simple Test Program</p>
        <h:form id="testForm" >
            <p>TEST</p>
            <aci:namesection></aci:namesection>
            <h:inputText id="username" value="John" />
            <h:commandButton id="submit" action="response" value="Submit"/>
        </h:form>
</h:body>
</html>

I found the problem.
The dtd location of the faces-config.xml had to be changed. It was pointing to the schema of 1.1.
With the following faces-config.xml, my application worked perfectly fine.
<?xml version="1.0"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
              version="2.0">
</faces-config>

Problems with config nodemanage SSL setings weblogic10.3

Hi,
I am new to build weblogic cluster. But I got some problems when I build it.
I tried to build a simple architecture as a demo to understand the cluster.
I have two PCs with XP
PC1 and PC2
I defined machine0 to PC1 and machine1 to PC2 in the weblogic.
pc1 IP:192.168.1.102
pc2 IP:192.168.1.103
I created a domain on the PC1 testDomain
I created a admin server and one node on the PC1(machine0):testAdmin, testNode1
I created another node on the PC2(machine1):testNode2
Cluter: testCluster, testNode1, testNode2 added
Cluster Address:192.168.1.102
I launch the nodeManager menully.
I wanted to start testNode1 in the admin console(web page)
It's seems working, I can see the status changed to "RUNNING". But I got the message in the console
Invalid/unknown SSL header was received from peer localhost - 127.0.0.1 during SSL handshake
It seems there is something wrong with the SSL handshanke, this message will appeared when I enter the
testDomain->Environment->Server page in the admin console.
I launched the nodeManager with the SecureListener=false
and the setting in the testAdmin, testNode1, testNode2 is SSL Listen Port Enabled UNCHECKED
keystores setting is "Dome identity and Demo Trust"
In the machine0 the node manger tab Type is Plain.
My question is:
1. I didn't setting the SSL why the server will use SSL to communitate each othe.
2. If I want to use Nodemanager to control the node server, is the SSL must be setting?
3. What cause the message I got, is between nodemanager and testAdmin or testAdmin and testNode1? Is there any way to solve it?
4. I found weblogic tool utils.CertGen can generate SSL certificates, how to use it to recreate the DemoIdentity.jks and DemoTrust.jks, is it possible?
My operations are all focus on the PC1 I believe the SSL setting is the cause, please give me some advise.
Thanks

Make sure you restart the nodemanger service or script when you make changes to the nodemananger.properties file. They don't usually pick up on the fly. Previous post was correct in that the errors are probably within the cert. Turn off SSL and test and it will confirm. If still getting issues turn off the hostname verifier on the admin server (on keystore page or SSL under the admin server config).

Reader 10.1.1 / AcroQTP / Win Vista / QTP10 - objects not recognised

Hi there,
I get the same behavior problem with my config: Reader 10.1.1 / AcroQTP / Win Vista / QTP10
According the comments found on others posts here, that is supposed to run.
Vista settings are done to avoid any problems (security on users desabled, everything is made on admin account,...).
PDF Reader has been reinstalled, and other versions has been tried too ( 9 and 10.1.4).
Only the latest version of AcroQTP has been used (business restriction for only PDF v10 or higher).
As other users, I can see the add-in ein my list, the "pdf items" in the tool>object identification but:
- no way QTP recognises the pdf content items, but only one global object.
- the test script that is provided with AcroQTP stops because the first item is not found (smart identifiction on and off, same behavior) --> which excludes pdf problems (as it is supposed to be interactive and not locked).
Any idea what I may have missed?
Thanks for your help
KR
C.

I unistalled and reinstalled everything. I still get the issue:
Config:
QTP 10.0 with Patch HP QTP_00626, on Vista and Browser IE7
All plugins (AcroPDF, Flex, etc) appear in the QTP active Plugins window.
Tested versions:
Reader 10.1.1 (not in compatible list but Adobe recommends it anyway, see "http://forums.adobe.com/message/3956025?tstart=0#3956025") -> No go
10.1.2 (ideal with the latest AcroPDF plugin) -> no go
10.1.4 (known issues, see the same link above) -> No go
remark: I only focus on the second version of the plugin (see "http://labs.adobe.com/downloads/aptt.html"), as the old one is compatible with 9.x versions, which are out of my scope. There is a rumour about an hypothetical third version, but nothing concrete here.
Problem:
I always get "Failed to find object: Failed to find Acrobat" when I run the AcroPDF test which is in the tool package. No acrobat installed.
The user manual says "An unsupported version of Acrobat is being used or both Acrobat and Reader are installed." But my configuration definitely fits with these criterias.
A record in QTP only sees AVPageView item.
-> According the AcroPDF documentation, it is supposed to only happen with QTP 9, but it appears with QTP 10 as well...
Does anyone have a clue how I could fix my issue?

LOL, great bug with faces-config.xml

Ok, its third time that I reinstall these stuff called JDeveloper.
Im tired of this! Unfortunately I cant work with Eclipse cauz it doesnt works with OC4J embed....
Image as follows shows these freakin' bug... LOL
http://img154.imageshack.us/img154/6268/jsfbugjn1.jpg

xml as follows:
there is no error! OMG... =/
<?xml version="1.0" encoding="windows-1252"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<managed-bean>
<managed-bean-name>ProcessoCompraInit</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.processocompra.backbean.ProcessoCompraInit</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>ProcessoCompraSelecaoHoteis</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.processocompra.backbean.ProcessoCompraSelecaoHoteis</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>DestinosInit</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.destinos.backbean.DestinosInit</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>BuscaInit</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.busca.backbean.BuscaInit</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>TematicasInit</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.tematicas.backbean.TematicasInit</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>WebServiceConteudoBackBean</managed-bean-name>
<managed-bean-class>com.seedts.cvc.webservices.WebServiceConteudoBackBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>ProcessoCompra</managed-bean-name>
<managed-bean-class>com.seedts.cvc.site.processocompra.backbean.ProcessoCompra</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<application>
<locale-config>
<default-locale>pt_BR</default-locale>
</locale-config>
<message-bundle>com.seedts.cvc.site.messageresource.MessageResources</message-bundle>
</application>
</faces-config>

Apache2 config issue with CFMX8 on Ubuntu

hi there -
I have a new Ubuntu laptop I purchased from Zareason, (great
deal, nice people). They were cool to install CFMX8 developer
version on my laptop before shipping.
My issue is this:
The cfadmin works fine, so I know CF is at least up and
running, and connected to the web server thru port 8500.
so,
http://localhost:8500/CFIDE/administrator/
works just dandy.
http://localhost/test.cfm
(with some simple code) outputs to the browser the literal code
The problem I have is that when I put a simple test .cfm page
in my documentroot for apache (mine is /var/www), the CF code
outputs straight to the browser. I know that SOME scripts execute
from this directory, since I can run PHP scripts.
Most of my config options for Apache2 seem to be in the
/etc/apache2/apache2.conf and /etc/apache2/sites-available/default.
I cant for the life of me figure out how to get a simple
script to run from this dir. I've looked at permissions,
configurations, etc and have come up empty.
any ideas folks? Thanks in advance.
hogan

Well found the issue. Adapter config needs to have a parent config tag. It was missing in my case.
<?xml version="1.0" ?>
*<config>*
<adapter type="scs" default="true" name="myadapter">
<config>
<property name="port">4444</property>
<property name="host">161.222.84.128</property>
<property name="type">socket</property>
</config>
<beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/>
</adapter>
*</config>*

Default Cost element pick up despite there is no setting in config.defined

Hi,
During external services(control key PM03), system picks up default cost element in maintenance order. Irony is that I have set no default cost element in "External procurement service in Config". I have also checked there is no default user data, despite this default cost element system picks up.
Please suggest me what to do.
Thanks & Regards
D.Singh

Once you enter the control key PM03, you will get pop up for maintaining material group. If you have defined the material group in config, cost element will be picked up from that.
Cost element will be picked up from the Material group which you mentioned in Order or in config.

Critical: Adding session-config to web.xml cause application NOT to start

I added the <session-config> element under <web-app> in web.xml:
<session-config>
<session-timeout>30</session-timeout>
</session-config>
Now the app won't start!
The reason: the built-in sun app server removes context-root attribute from <web-module> element in domain.xml when the app tries to start!
Please fix this ASAP, guys!

I placed it in the wrong place. After following the instructions contained in the Technical FAQ (below), it worked.
Add the following element in your web.xml file, placing it after the mapping for the error servlet and before the welcome file list:
<session-config>

<session-timeout> 60 </session-timeout>
</session-config>

Config Reader on E250?

Similar Messages

Maybe you are looking for