Config settings for Closed indicator in PR

Dera experts ,
I want the system to automatically set the "closed " indicator in PR "quantity/Dates" tab , once a PO has been generated ( fully/partially ordered)
Can anyone tell me the settings for the same ??
  Regards
  Anis

Hi frnd,
I dont think so that there is any such config for "closed" tick.
We have to manually set the tick either in ME52N or buyer can set the tick at the time of PO creation.
In ME21N ( buyer have to goto Item Detail - Delivery Schedule -  Click PR closure tab).
Or you can Create a BDC and create a Z program and Z t-code and ask user to run the same for bulk PR line item closure.
I hope this will help.
lets see what others have to say about it.
Regards,
Amit P Hiran
njoy SAP...
njoy Lyf....

Similar Messages

  • Config settings for continuous Inv.

    Dear all ,
    I want the settings for Continuous Inventory Buisness Process, So what are the prerequisite & postrequisite
    setting to achieve this buisness processs.
    Please help me out.
    Regards,
    Rock

    If you meant cycle counting, here is text from config.
    Tcode: OMCO
    This is for Inventory managed at Sloc level. If you are using WM, it's more complicated.
    Cycle Counting
    In this step, you complete the system settings for the physical inventory method of cycle counting by defining the individual cycle counting indicators for the given plant.
    The cycle counting indicators are used to group the materials together into individual categories.
    Recommendation
    Normally, the cycle counting indicators are assigned when an ABC analysis is run. However, different indicators can be defined, if necessary.
    Activities
    1. Define the allowed cycle counting indicators in the plant.
    2. Make the required settings for each indicator.
    Remember that the total of the percentages must be 100 if you want to assign the indicator to the individual materials as part of an ABC analysis.

  • Config settings for AP, AR from SD and MM prospect?.

    Hello Guru's,
    Will anyone share your expertise,  what are the config settings for AP and AR from SD, MM point of view and what are the Integration points for AP and AR with FICO.

    You may check the links to understand the link between SD and FI.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=33768
    http://www.sapscene.com/sapscene/accassg.html
    http://www.sap-img.com/financial/fico-interview-questions.htm
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    http://sap-img.com/financial/integration-of-fico-with-other-modules.htm
    Regards,
    GSL.

  • Config settings for making Inbound delivery instead of TR

    Hi,
    Scenario- Plant to plant stock transfer from Non WM plant to WM enabled Plant. Material document is posted and quant lies in st type 920.
    In the current system settings it creates TR automatically (Path - WM-interfaces-IM-define MVT - LE WM interface to IM - field Create TR)
    Question - Instead of system creating TR, I want Inbound dely to be created. What are the config settings to be done?
    Regards.

    First, you need to work against Stock Transfer Purchase Orders with confirmation control 0004 - Inbound delivery for every item in the STO.
    So the process steps are:
    1. Create STO for plant to plant with confirmation control 0004 at item level (assuming that relevant configuration is available in MM-Purchasing)
    2. Create outbound delivery from issuing plant and issue the goods.
    3. Create Inbound delivery using transaction VL31N (you can automate this if you have SAP ECC 6.0)
    HTH
    Baseer

  • Config settings for Decimal places in Master Inspection Characteristics

    Hi,
    can any body tell me where to do the configuration settings for decimal places  in master inspection characteristics
    i want my limits to be 1.234
    i want 3 decimals after point
    Regards,
    Raj

    Hi,
    Please go through the below link.
    http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
    While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
    In that screen you can enter the decimal places, UOM, target, lower limits etc
    Regards
    Hari

  • TR priority (LTBK-TBPRI) - where are the config. settings for this ?

    Because I can't find it !
    Thanks,
    Nick

    As for value for the field:
    Yes, if you check the value range for data type TBPRI you will see that there are neither fixed values nor config table behind it. In this case I think only the data type restricts which values can be inputted into the field.
    In case of TRs you can use this priority for selection e.g. in LB10.
    I guess this indicator might be important e.g. in programs which processes TRs, PCNs, deliveries, TOs in mass (system may take care of the sequence based on this like there are hints in OSS notes 1360335, 312656)
    Mayeb someone who uses this indicator can give more information / explanation.
    (I used it only once to prioritize TRs in connection with PrdOrds)
    Edited by: Csaba Szommer on Aug 5, 2010 3:26 PM

  • Needed config settings for automatic storage location

    hi,
    sap gurus,
    configuration settings needed for automatic storage location at sales order level.
    it is coming by using OVL3 at delivery document level.
    but we need it sales order level.
    regards,
    balaji.t

    Hi Balaji,
    In standard Storage location cannot be defaulted in Sales order. OVL3 is for determining the storage location in Delivery.
    However to map your requirement of having Storage location determination in the Sales order do the following:
    In the Plant Setting IMG> Enterprise Structure> Definition> Logistics - General> Define, copy, delete, check plant. Here select your plant and go to Address for this plant. Here in Search term 2 Maintain some alphabet say "A". Now ask your ABAPer to write a user exit for determining the Storage location if the Sales order has the same Plant used in it with search term as "A" then use table V_TVKOL (storage location determination table) and fetch the correct storage location based on Shipping Point + Plant + Storage conditions.
    Hope the same works for you!!
    Regards,
    Ajinkya

  • Where are the about:config settings for a profile stored?

    I am setting up a custom firefox profile and would like to tweak some of the options that are accessed via about:config.
    I would like to know where this information is stored and whether I am able to modify these options outside of the browser.

    Thanks, I was modifying the prefs.js file the whole time but didn't realize these were the same settings from about:config. The user.js file is also useful to know.

  • How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

    When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • Output type settings for Goods receipt  slip form

    Hi gurus,
            I am new to SAP and i am trying to write a functional spec based on a Goods receipt slip template the company has given me.
    can anyone tell me the standard forms and programs associated with the Goods Receipt form.also i would appreciate if someone can help me do config settings for this.
    thanks and look for ward for suggestionas and help.
    Chris

    Dear Chris ,
    You can get all data needed into tcode NACU !
    Choose Application ME and messages WE01 until WE03. Inside this customizing you can see all details that you need.
    best regards,
    Carlos Moçatto

  • When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs..

    When closing Firefox windows, I would like a warning before the last window closes. The about:config settings do nothing. There is a warning for multiple tabs... why not for the last window? I do not use tabs... just windows... I have a mouse button programmed for that. It is really irritating to have to restart Firefox all the time and then open the history window because no warning was issued!

    This is ridiculous. I've had this problems for years now and I'm finally walking away from Firefox. I use my keyboards more than my mouse, and how many times does your finger slip and hit Command Q instead of W. How come FF can't reset something as trivial as this? So many people are having problems with this?
    Feels like FF has become too big, too slow and just not cooperative anymore. What a shame, I've been using Netscape/Firefox for 13 years. This is silly.

  • Config to Turn Off Indicator for Billing Plan in Header

    Hi,
    anyone knows whether there is a config that is able to turn off (or default as blank) for the indicator for "billing plan in header" that is found in the item's billing plan? This is the indicator that cause the item billing plan dates to copy from header's billing plan.
    I am trying to write a program that create sales order with billing plan using BAPI_SALESORDER_CREATEFROMDAT2. As this BAPI does not allow me to change the item billing plan dates, I am looking at using the stardard program SDFPLA02 after the BAPI is called. However, for the program to work, I need this "Billing Plan in Header" un-tick,
    Or, is  BAPI_SALESORDER_CREATEFROMDAT2 able to un-tick this indicator?
    Regards,
    Norman

    Hi,
    In SPRO> Sales and Distribution> Billing> Billing Plan> Assign Billing Plan type to Sales Document type.
    Remove the assignment.
    Hope this helps.
    Regards,
    Sharan
    Edited by: SharanKumar.S on Oct 3, 2011 11:25 AM

  • HT202157 In Settings on Apple TV2, while looking for Closed Captions, I accidentally changed the default Language to something I cannot decipher. I cannot read the lists to find English. Help?

    Using AppleTV2, in Settings looking for closed caption aoption, I accidently changed the default language from English to something with hieroglyphics. How do I revert to English?

    http://support.apple.com/kb/HT5255
    Settings is the rightmost tab at the top.
    Settings > General is the first choice under it.
    Settings > General > Language should hopefully be the 11th item down, and there you should find English.

  • CONFIG.DOCUMENTS FOR OVERHEAD SETTINGS

    Hi
    Can anyone help me to send the step by step configuration document to do the settings for overhead costs as it has to be added with our semi / finished stocks.
    My maid ID     [email protected]
    Thanks
    G. Jana

    Hi Satya,
    while configuring a system first it is always useful to go through the help.sap.com as Vijay directed you there, thanks Vijay!!
    If you already have a picture of the entire system config in that area you are looking for, go to the IMG with the TA SPRO and check out the documentations for all the nodes you are reuqired to customize.
    In these documentations you will find descriptions, enabled values, etc for that special setting.
    Rock that!
    Best regards,
    Zsolt

  • Cannot change setting in privacy from remember history to use custom settings for history. I can set in to change but on closing with the ok button thus closing the privacy tab, it then reverts back to remember history.

    I have been by a web sit that the cookies are disabled in the browser. on looking at the help on firefox help the instuction as i understand was to change the setting under the privacy tab ref history fromthe default setting of rember hhistory to use custom settings for history. I change the setting click ok but it reverts back to rember history. I just cannot change the setting.This also happend in the prevous version.

    To see History and Cookie settings in Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    You need to make at least one change to make "Use Custom settings" stay selected.
    If all history settings are the default then the History and Cookie setting revert to "Remember history" the next time you open Tools > Options > Privacy.
    So it looks that your cookie setting are already correct.
    * http://kb.mozillazine.org/Cookies
    * http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Maybe you are looking for