Config settings for making Inbound delivery instead of TR

Hi,
Scenario- Plant to plant stock transfer from Non WM plant to WM enabled Plant. Material document is posted and quant lies in st type 920.
In the current system settings it creates TR automatically (Path - WM-interfaces-IM-define MVT - LE WM interface to IM - field Create TR)
Question - Instead of system creating TR, I want Inbound dely to be created. What are the config settings to be done?
Regards.

First, you need to work against Stock Transfer Purchase Orders with confirmation control 0004 - Inbound delivery for every item in the STO.
So the process steps are:
1. Create STO for plant to plant with confirmation control 0004 at item level (assuming that relevant configuration is available in MM-Purchasing)
2. Create outbound delivery from issuing plant and issue the goods.
3. Create Inbound delivery using transaction VL31N (you can automate this if you have SAP ECC 6.0)
HTH
Baseer

Similar Messages

  • Error while posting MIGO for HU-Inbound Delivery

    Hi All
    When am trying to post the MIGO for HU Inbound Delivery Creation, am getting an error saying "Required parameters missing when calling up module MARV_SINGLE_READ". 
    Following areas I have verifed:
    The posting periods in MMRV shows current period.
    The Number range for HU ID and Delivery type HID is maintained.
    Now am looking for your expert opinion to resolve this issue.
    Regards
    K. Viswanathan

    Are you getting the same error in  transaction MB1C to create the delivery.Try in MB1C

  • Error : Pre Settings for IDoc inbound processing are missing error

    Hi Experts,
    There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
    Thanks in advance.
    Madhurima.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    [iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

  • BDC for MIGO-inbound delivery

    Dear Gurus,
    I want to create a BDC for GR-INBOUND DELIVERY.Is there any process that we have to upload two text files one at header level & one at item level.Pls suggest if there is any other method. 
    Regards,
    Prasad.

    1)Create a recording of inbound delivery creation if u want to create in mass.
    2) Make a note of all the filds recorded and make a excel sheet then convert it in notepad.
    3) Upload it by LSMW.

  • Best Settings for making a Secure, Reliable Disk Image?

    Hi guys!
    Can anybody direct me to the best settings that can be used to make a secure Disk image using the MacOS X disc utility?
    I wish to make my computer family friendly, yet keep my proffessional and private files secure/private and innaccesible to children and unautorized individuals. I have heard that files saved inside encrypted images (password protected) are also not indexed in the finder wich is perfect for the privacy I seek (this is true right?).
    I know how to access the tools, but the right settings for making a trustworthy image remain elusive. Already tried with some of the formats and information placed inside...started becoming glitchy and unreliable, even after removing the files and making them unencrypted again.I'm abaout to try with the HFS+ format.
    I cannot lose the files I wish to protect. But I need to secure them and if anything, be capable of backing up the image by copying it into a HFS+ formated external hard drive every once in a while. Can this be done?
    Is there a risk of data loss in the encryption process? One of my external drives (FAT 32) even started to make unrelated neighboring folders "disappear" after making an image inside ( I though I could make an image anywhere and save stuff securely at that point...but nearly losing the entire cashe of info made me backtrack and simply avoid the process until i'm sure of what I'm setting up---so many compatibility problems!)
    • Don't know what settings to use.
    • Some say there is a small chance of a disk image being damaged or corrupted (for no reason whatsoever)...but having trouble right off the bat, with a brand new image worries me. WHAT ARE THE RISKS? Is the system unrefined and unrealiable?
    I plan to make the Image a sparse file,using the HMS+ format, 400GB....regular encryption. I plan to copy all my sensitive stuff inside and delete unprotected copies. Risky? Are images unreliable in general? or where my glitches abnormalities?---Can the images hold collections of files or do they become more unrealiable the bigger they get (what I fear). I don't wan't to have to make dozens of images to protect my files.
    Can a external drive be formated to HMS+ and accept  a drag and dropped copy of a 400GB image? FAT32 will just not accept it. Would there be risk of the image being damaged in the transfer? NOTE that copying the data into an external drive would be to have a secure backup of the data. If I can't trust the backup to be carbon copy intact...it isn't a backup.
    Securing files is really proving to be bothersome, despite having "refined" tools at my disposal.
    Thanks for your help!

    Do you place your backups on external disks? Are your external disks formatted HFS+?
    Can HFS+ Disk image be Drag dropped into a HFS+ formatted external disk in order to copy them? or is the process blocked like what happens to large Disk images in FAT 32?
    I'm trying to lock on to the right format to apply to everything. My steps will be:
    Make the image: So far a sparse image in HFS+ format, 400 GB, No partition map.
    Drag sensitive work to Disk image. Once transfer in complete delete originals.
    Format an external disk into the journaled HFS+ format. Drag drop Secure disk image to back it up.
    Do you see any problems with this process? Anything i'm missing?

  • Config settings for AP, AR from SD and MM prospect?.

    Hello Guru's,
    Will anyone share your expertise,  what are the config settings for AP and AR from SD, MM point of view and what are the Integration points for AP and AR with FICO.

    You may check the links to understand the link between SD and FI.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=33768
    http://www.sapscene.com/sapscene/accassg.html
    http://www.sap-img.com/financial/fico-interview-questions.htm
    http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
    http://sap-img.com/financial/integration-of-fico-with-other-modules.htm
    Regards,
    GSL.

  • What are best Mpeg encoder settings for making DVDs?

    In switching from PP1.5 to CS3 the procedure is different for making DVDs and we have to encode mpeg files that later get picked up by Encore DVD build proces. What are the best mpeg encode settings for making the DVDs?
    Thanks,
    Chuck Taylor

    Question:
    If you are doing a video that is small enough that you are not worried about size, what is the absolute best quality encoder settings? Would a Continous Bitrate result in a higher quality file generally? VBR is for trying to make a smaller file I assume.
    I'm frustrated with even white letters on black titles that have some flicker. I just don't seem to get the smooth quality I desire.
    Should I look at a different encoder?
    If you output PP3 to an AVI and then import it into encore, isn't there a reduction of Q. due to the save to the AVI file?
    thanks.

  • What are the best imovie, mpeg4 settings for making dvds?

    What are the best imovie, mpeg4 settings for making dvds?

    • iMovie'08 to 11
    - Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
    iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
    iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
    • DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
    • iDVD does only care about TIME / Duration as
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    • iDVD Does Region = Zero (to be played everywhere)
    • Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
    If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
    One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
    I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
    • NTSC - US etc
    • PAL - EU etc
    Yours Bengt W

  • Finding FM/BAPI/RFC for Create Inbound Delivery(vl31n).

    Hi all,
    i need for a FM/BAPI/RFC for Create Inbound Delivery(vl31n) or ASN
    where in import Parameter i have to pass -
    *vendor no*
    *PO no*
    *External ID no*
    *Delivery date*
    *TransPlanngDate*
    *BillOfLad*
    *GR/GI Slip*
    in Export i need ASN no and in tables we can use ITEM details.
    Regards,
    Sunil sahoo.

    Hi,
    Check the below link
    [https://forums.sdn.sap.com/click.jspa?searchID=16938983&messageID=5780492]
    Regards,
    Surinder

  • How to post good receipt for an inbound delivery with HU in the stock?

    Hello,
    We have an inbound delivery of a purchase order with 10 Handling Units inside on.
    The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
    Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since  the handling units are already in a storage bin.
    Can anyone help me on this matter?
    Thanks

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • Config settings for Closed indicator in PR

    Dera experts ,
    I want the system to automatically set the "closed " indicator in PR "quantity/Dates" tab , once a PO has been generated ( fully/partially ordered)
    Can anyone tell me the settings for the same ??
      Regards
      Anis

    Hi frnd,
    I dont think so that there is any such config for "closed" tick.
    We have to manually set the tick either in ME52N or buyer can set the tick at the time of PO creation.
    In ME21N ( buyer have to goto Item Detail - Delivery Schedule -  Click PR closure tab).
    Or you can Create a BDC and create a Z program and Z t-code and ask user to run the same for bulk PR line item closure.
    I hope this will help.
    lets see what others have to say about it.
    Regards,
    Amit P Hiran
    njoy SAP...
    njoy Lyf....

  • Step for creating inbound delivery in case of customer return.

    Hi,
    When I start vl31N I can create with reference to vendor or PO an inbound delivery.
    How to create inbound delivery with reference to a customer return?
    What to do?
    Thank you in advance,
    Eric van Zundert.

    Hi,
    You can try to create a copy control for return sales order to inbound delivery document. Depending on business requirements like combining vendor PO and returns sales orders, you can try to use VL31N.
    If it is only returns sales orders that needs to be processed, then SAP standard document types and its associated copy control would help.
    Regards
    P.S: Does your scenario relate to import process? I am in the same boat.
    Edited by: Shiva Ram on Jan 22, 2008 2:17 PM

  • Not able to post GR for an Inbound delivery

    Hello Experts,
    We are into support project. We have an issue with GR for inbound delivery. The issue detail is below.
    1. Purchase Order created for a material for 100 qty
    2. Inbound delivery created for the same
    3. GR done for the same quantity
    4. GR document got updated in the inbound delivery as well as PO history
    5. Reversed 50 qty using MB01 with movement type 102.
    6. Reversal qty and document got updated in the PO history where it is not updated in the inbound document flow.
    Now when we do the GR for balance qty 50 which we have reversed, we are not able to do the GR.
    The error message is "Qty to be posted is greater than maximum postable quantity" and message number is VLA 308.
    We are not able to cancel the material document which we have reversed nor able to post goods receipt.
    Could anybody tell me how to resolve this issue?
    Thanks
    Bala

    Hi,
    Please check SAP note 1050944
    Regarding this issue

  • How to create HUs and input SNs for a Inbound Delivery by BDC or Function?

    I need to create HUs and input SNs for Inbound Delivery Order as VL32N.
    At first, I create a BDC program using T-code VL32N, it does work for a few HUs in one Order, but when there are more than 5 HUs in one order, the later can't be input by this program, because the table control of HUs only display 5 records in my screen, so it need page down during BDC process, while in Ttl content, there 16 rows displayed, it need page down after 8 records. But different user have different screen size, so my program doesn't work for all user.
    What should we do for turn page in BDC program?
    OR
    Is there any function can be used for creating HUs and input SNs for Inbound Delivery?

    How did you solve this issue, Can you give me some clue?
    Regards,
    Mohan

  • Pending GR no for existing inbound delivery

    We create inbound delivey using VL31n. after that Goods receipt ( Migo ) is done.
    is it possible to display the list of pending GR's  whose corresponding inbound delivery's are
    done but Gr's are pending ? 
    Already gone through sdn .

    Hi Explore,
    if you want to display inbound deliveries without GR postings, please see the previous answers where the colleagues mentioned couple of transactions.
    Please also note: they can only help if you post your goods receipts with transaction VL32N. "The functional things that links the inbound delivery and Goods reciept number in migo" is the document flow, otherwise known as table VBFA. As I said before, to populate that table with the material document you have to post the GR in the aforementioned VL32N. If you post the GR in MIGO, even if you choose inbound delivery as a reference, VBFA will NOT be updated, thus there will not be a link between the delivery and the material document. The inbound delivery is used merely as a reference to find the purchase order.
    I wrote about the field MKPF-XBLNR. It gets filled automatically only if you post the GR over VL32N. If you post over MIGO, you're out of luck unless you enter it manually. Of course, you can make the field a required entry to ensure it's populated by the user. Then you can "manually" link to the LIKP/LIPS tables in ABAP for example.
    Regards,
    Attila

Maybe you are looking for