Config.sh doesn't see my template jar

Running WL Server 8.1.4 on Solaris 8.
I used config.sh to set up a fairly complicated (custom) domain, which seems to run fine. Then, I ran the template builder against that domain and successfully created a template jar. To try out the template, I moved the domain directory aside and re-ran config.sh, in an attempt to restore the original domain from my template. When the Wizard got to the panel to select a configuration template, I browsed to the directory where my template jar was placed by the builder, but config.sh didn't find/display it. I even tried copying my template jar into the directory where the four standard BEA template jars are located, and re-ran config.sh, but only the four BEA templates were displayed.
I did a jar -tvf on my template jar, and it seems to contain the same sorts of items that the smaller BEA templates have.
What would cause config.sh to reject or ignore a template jar?
GD

Hi!
The domain template is a jar file that contains several XML files. Check that it has template information file called template-info.xml with content like the one below:
<domain-template-info>
<identification
version="8.1.2.0"
type="Domain Template"
name="MySuperDomain"
author="John Doe"
description="Create a basic WebLogic Workshop domain, without installing sample applications. Domains created from this template will support the WebLogic Server and WebLogic Workshop runtime functionality, including support for J2EE applications, Web applications, Web Services and custom controls. Use domains created from this template for development of WebLogic Workshop applications."
iconName="workshop.gif"/>
<category>JDoe</category>
</domain-template-info>
If the file is not there it is not likely that the template will be accepted. (It should be in the root of your JAR file.)
Good luck,
-SM

Similar Messages

Dreamweaver doesn't see my template anymore

I honestly searched this forum for my issue but not having
any luck. I need to edit a Dreamweaver site. I created it using a
template (.dwt) and it has never given me any trouble until now.
For some reason when I edit the template and save the file,
Dreamweaver doesn't ask if I want to update the pages anymore. It
used let me know about updating my pages in the past and I sure
don't recall ever telling Dreamweaver to not update.
Anyway, in order to get around this, I tried to reapply the
template, but when I make the attempt, Dreamweaver doesn't
acknowledge that my site has any templates.
(Modify>Template>Apply Template to Page> I see a "no
templates" message) So I cannot apply my template or any template.
Furthermore, if I try to edit the actual page, DW won't let me edit
the template regions. The preview shows the name of the template in
the upper right corner of my HTML pages. What can I do? to fix
this? Right now, I'm locked out of my pages. Thanks.

Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pcgs" <[email protected]> wrote in message
news:[email protected]...
>I honestly searched this forum for my issue but not
having any luck. I need
>to
> edit a Dreamweaver site. I created it using a template
(.dwt) and it has
> never
> given me any trouble until now. For some reason when I
edit the template
> and
> save the file, Dreamweaver doesn't ask if I want to
update the pages
> anymore.
> It used let me know about updating my pages in the past
and I sure don't
> recall
> ever telling Dreamweaver to not update.
>
> Anyway, in order to get around this, I tried to reapply
the template, but
> when
> I make the attempt, Dreamweaver doesn't acknowledge that
my site has any
> templates. (Modify>Template>Apply Template to
Page> I see a "no templates"
> message) So I cannot apply my template or any template.
Furthermore, if I
> try
> to edit the actual page, DW won't let me edit the
template regions. The
> preview
> shows the name of the template in the upper right corner
of my HTML pages.
> What
> can I do? to fix this? Right now, I'm locked out of my
pages. Thanks.
>

Not Able to see Workflow Template in 4.6c

Hello Experts,
I am working on 4.6C version. I have a strange problem, when i use the transaction SWDD, i am not able to insert the workflow template say WFXXXXX but in the pop up if i press WF Definition then i am able to see the template.If i directly press enter(Insert) in the pop up screen then it is saying Workflow Template doesn't exist.
Can any one of you please help me in this. One more doubt, is it possible to Retrieve WF Template if it is deleted by mistake in 4.6C??.
Thanks a lot in advance....
Rgds,
Mohan

Hi Jagan,
The workflow template is by naming convension WSxxxxxxxx. Please try using this and check if you find the template.
Also you can trace the workflow template in t-code PFTC. Select WS Workflow Template and give your workflow template ID. It would give you the details of your workflow.
Hope this helps!
Regards,
Saumya

ITunes 7 doesn't see my iPod but it is in My Compueter!

Diagnostics that I ran:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
System manufacturer System Product Name
iTunes 7.0.0.70
iPodService 7.0.0.70 is currently running.
iTunesHelper 7.0.0.70 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskST3300831AS____________________________3.02___, Bus Type ATA, Bus Address [2,0]
IDE\DiskWDCWD740ADFD-00NLR1___________________20.07P20, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller, PCI bus 0, device 2, function 0. Device is working properly.
Standard Enhanced PCI to USB Host Controller, PCI bus 0, device 2, function 1. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: XXXXXXXXXXXXX
I've reinstalled iTunes 7, restarted all the services and had no detection yet.
I re-installed iTunes 6.0.5 and it worked w/out a hitch.
Does this have something to do with my pc not having any firewire ports on it? Or is there a work around ?

Ok, I have been able to fool iTunes and my iPod to at least get it up to firmware version 1.2 BUT still doesn't see my iPod until I kill the iPod service then start iTunes. And this gets better, after it sees it my iPod drops and acts like it's disconnected yet my computer still sees it as connected!
I too don't want to go back to iTunes 6 but it may have to come down to this.
To regain your Library all you have to do is get ride of the xml config files and config folders, just leave your music folder and re-import your music files in 6 and you'll be set.

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

PSE 12 for Mac doesn't see my scanner

PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001

Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William

I have prepared a book on iPhoto, ready to buy book. There is amessage above about half the pages that says "drag photo to place in background" as if it doesn't see the picture there. Its a MAC 08X 10.6.8 and iPhoto '08 7.1.5. I have made iBooks before b

I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!

Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT

Migration Assistant problem? : New iMac's iTunes doesn't see the catalog or playlist of my old Mac's songs on an external drive

So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--Jeff

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

ITunes 9.2.1 doesn't see my iPhone 3G 4.0 on Windows 7 x64

Hi everyone. I'm running Windows 7 x64 and have been having this problem since I updated my iTunes to 9.2. The problem is I plug my phone in, and iTunes doesn't see it. After plugging it in, iTunes seems to struggle a bit, lags, before finally running smoothly again. The phone doesn't appear in iTunes, though my computer detects it and I can browse the photos like I always could. Any help is appreciated!

yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now.

Itunes 10.6 doesn't see my ipad, ipod, or iphone

I reinstalled 10.6 and it worked once and now it doesn't see them again.I rebooted and it still doesn't recognize my iPad. I googled this question and this problem seems common but I haven't heard of one permanent solution. I am about to lose MobileMe, so the only way I will be able to sync is through itunes. Please tell me there is a solution. Thanks.

Do they have airdrop enabled?

ITunes doesn't see PSE7 images

I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?

I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
PC Windows XP

Updated to Itunes 7.0.1, doesn't see my ipod via USB1.1!!

Hi
My itunes/ipod were running fine under USB 1.1 (older computer) until I updated to 7.0.1 - now itunes doesn't see my ipod!! The iPod shows up in device manager, though, and my machine even mapped a drive to it when iTunes timed out (I removed that).
Everything was fine until I updated. sigh.
I found an Apple page that said they don't "support' USB 1.1 - could it be that iTunes 7.0.1 just doesn't?
thanks in advance for any help!
Brian

yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now.

My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

Frozen in "Do Not Disconnect" iTunes doesn't see iPod

I have never had one bit of trouble with my iPod until today. I plugged it in, the Do Not Disconnect comes up, the clock is frozen, no charging happening and iTunes doesn't see the iPod. I tried the "restart" and nothing is working. What do I do?
I haven't upgraded to iTunes 8.1 yet, would that help?
HELP!

OK, so I tried the Reset again. Still didn't work. THEN I saw this:
Tip:
+If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.+
Tried it again and now it's all better.

TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help

I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?

Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M.

Config.sh doesn't see my template jar

Similar Messages

Maybe you are looking for