Config template for CE7.1 connect BI to Portal

Hi Friends,
in netweaver 7.0 I have a template to connect a BI system to the Portal.
Is there the same available in CE 7.1?
Thanks
Jimbob
Edited by: jimbob on Nov 19, 2009 10:51 PM

Hi,
The answer is Yes and No.
In the portal part of CE you can create a BI system with template like you did in NetWeaver 7.0. You can even transport your system created in NetWeaver 7.0 into CE.
If you plan to use Visual Composer, you'll have to create also your system in NWA.
Regards, Gilles.
Edited by: Gilles Godart on Nov 22, 2009 10:35 AM

Similar Messages

[b]Config JDBC for JSP to connect to OracleDB[/b]

I use iWS6.0 and JDK1.2 to enable JSP.
To use JDBC Driver to connect to OracleDB, I simply set CLASSPATH to the location of classes12.zip, and I have tested in java command-line, it worked fine.
To let JSP work with JDBC, I edit file jvm12.conf so that the jvm.classpath to location of classes12.zip, but it doesn't work.
Could someone guide me to the solution, or some document to read.

Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");Modify these lines as this, checking whtr the driver is available in the correspopnding package...
Class.forName("COM.ibm.db2.jdbc.net.DB2Driver");
i suppose that this works out well.

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

How to crate a page template for multiple page instances?

Hello,
When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I can use use it as a template for many page instances in one portal?
I'm using Portal 8.1.6.
Regards,
Eirik

Hey Dave, See the image below:

Install sharepoint 2013 project templates for VS 2012 without connecting to internet - offline install

HI,
is there any way i can install thE sharepoint developer tools in my dev machine for woirking with SP 2013 AND VS 2012?
i am not getting the sharepoint project templates when i went to VS 2012.
so the link says that i need to connect to internet and install web platform installer 6.0.
but my machine cant connect to net .
if anyone has done the offline installation of sp 2013 project templates for VS 2012 , pls provde me the links / ways.
help is highly appreciated!

check this blog
you need to install Microsoft Office Developer Tools for Visual Studio 2012 to get the project templete
http://blogs.msdn.com/b/timquin/archive/2013/01/22/setting-up-visual-studio-2012-for-sharepoint-2013-development-offline.aspx

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Oracle Sesame Adaptater - missing template for creation of a new SAIL repo.

Hi,
I'm trying to deploy the Sesame Adaptater on my TOMCAT server.
At the point 8.9 of the doc ( http://docs.oracle.com/cd/E18283_01/appdev.112/e11828/sem_sesame.htm#BABFFEFA) I'm suppose to type in the sesame console the following comand :
"create oracle."
I got this error :
ERROR : No template called Oracle found in C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates
By reading the Sesame doc and according to this page (http://www.openrdf.org/doc/sesame2/users/ch07.html) I suppose that I have to add in the "C:\Users\<Username>\AppData\Roaming\Aduna\OpenRDF Sesame Console\templates" directory a file based on this template :
# Sesame configuration template for a main-memory repository
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.
@prefix rep: <http://www.openrdf.org/config/repository#>.
@prefix sr: <http://www.openrdf.org/config/repository/sail#>.
@prefix sail: <http://www.openrdf.org/config/sail#>.
@prefix ms: <http://www.openrdf.org/config/sail/memory#>.
[] a rep:Repository ;
rep:repositoryID "{%Repository ID|memory%}" ;
rdfs:label "{%Repository title|Memory store%}" ;
rep:repositoryImpl [
rep:repositoryType "openrdf:SailRepository" ;
sr:sailImpl [
sail:sailType "openrdf:MemoryStore" ;
ms:persist {%Persist|true|false%} ;
ms:syncDelay {%Sync delay|0%}
Do anyone have the correct template ?
I didn't find any other thread about this problem, so I supose it's an easy issue to solve, but the Semantic Technologies are totally new for me.
Arthur

I finally find the answer to my question. The template used in the tutorial is present in the sesame adapter.
I just had to extract the files into the "sdordfsesame.jar", the template is locate in "sdordfsesame.jar/org/openrdf/console/oracle.ttl".
After adding the "oracle.ttl" to the correct directory, it's work fine.
Arthur

Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

Hello,
I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
1-Unable to refresh data for a data connection in the workbook.
Try again or contact your system administrator. The following connections failed to refresh:
PowerPivot Data
2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
3-01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel
Calculation Services    bccc Medium Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
[0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    f1va Medium CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.09 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    eq3r Medium ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    aysl Medium Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12* w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
Thanks in advance for your help

Hello Challen Fu
I would be so grateful if you could please help me out
I have been trying to find a solution to the same error message
In my case, the power pivot reports were working before on a regular team site , but then two things changed:
a) I created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
b) On the  backend, the database instance was upgrated to SQL Server 2012
     Front end Server VDSP01 remains SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
Scenario recap:
a- Server VDSP01 uses SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
b- On the back end, the database instance name was replaced with SQL 2012 Server:
         from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
           to     SQL Server 2012 ( instance VTSQL01\COTS)
c-  I was told that:
     From VDSP01, they ran
CliConfg.exe to create SQL Server Alias :
       where    BEFORE: vdsharepoint --> DBDEV-COTS\COTS
            and AFTER    : vdsharepoint --> VTSQL01\COTS
I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
  <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
wanda larangeira

I'm looking for a template for making a survey and have the statistics results

guys, I'm about to launch new business and I want to make a market survey to get to know about my future clients, prices for my services, the best place to do it all …. etc. I was wondering if there is a website where I could get a template for that using iWork 09 (Pages or Numbers). If anyone could help me I would appreciate and thanks in advance.
Macmithos.

http://www.iworkcommunity.com may have something.
You are more likely to get this to work in Numbers because it can connect between tables and has things like check boxes for multiple choice.
If you are intending to use this information seriously I recommend you use a relational database to get a much better handle on your work and also to ultimately tie everything together, project details, hours, billing etc.
Peter

How to create custom template for webcenter portal application

Hi,
I created webcenter portal application in my jdev using the webcenter portal application template provided by the webcenter framework.
I tried to create custom template for my application by following steps:
1. Created new application using webcenter portal application template with all default package structure.
2. Right click pagetemplates folder under webcontent package and select new option.
3. New gallery opens up.
4. Selected JSF under webtier and JSF Page Template under items in the right hand side and clicked Ok button.
5. New wizard opens up for creating new JSF page template.
6. Gave template name(file name) and Page Template Name(template def name).
7. Selected checkbox staing start a Quick Start Layout and selected three column layout and selected Ok.
8. Selected checkbox for Create Associated ADFm Page Defination(so that page templates can be changes at run time).
9. Created some Facet Definations (header, footer, content1, content2, LHN, RHN).
10. Clicked Ok button which will create custom template.
11. Added some Panel Group Layout component from Component Palette.
12. Created new page (.jspx) with this template.
Now when I try to add producer portlets created using Producer Portlet application template and connected to the above application using WSRP2.0, I'm facing problem.
The prolem is that I'm not able to add more than one portlet in one single page?
Kindly let me know whether the steps followed by me is wrong some where and needs to corrected and let me know how I can add more than one portlet to page?
Basically I cant see more than one placeholders in my page to add portlets.

Thanks Yannick.
In the step 9 I had mentioned that I created various facet definations (header, footer, content, content1 RHN and LHN).
Is this is not facet you are talking about or should I drop facet ref from the resource palette?
Can't I add moer than one portlet to my page at design time itself?
Annoying since in weblogic portal we do this at design time(.portal).

Need to disable the clearing of browsing history and what is the "about:config" function for it?

I am working on an Group Policy Administrative template for Wetdog.exe, and it's awesome by the way. Just want to know what function to use (listed in "about:config" url) so i can turn this feature off entirely.
I don't want my users deleting browsing history, or have any ability to view it either.
Still, i want the browser to keep at least 30 days of history.
This is EASILY accomplished in Internet Explorer via GPO, but not so much in Mozilla with wetdog.exe and it's admin templates. I am using Windows Server 2003 enterprise edition R2 on 2 domain controllers, and Windows XP Professional SP3 client workstations with Mozilla 3.6.3 and the latest version of Wetdog.exe and it's admin templates.
Any help would be much appreciated!!!
== This happened ==
Every time Firefox opened
== My boss decided that we need to keep browsing history locked out of our existing 700+ workstations ==
== Troubleshooting information ==
just need to disable the "history" button, the "tools\clear recent history" button, and "tools\options\privacy tab\history"

It can be annoying, but I think their motivation is good. They are trying to make things better for their customers and I think they have, even though sometimes it is annoying. I think it would be nice if they would advise us when the pages are going to be down for maintenance, In the mean time, you could have another E mail account so you can always get access to your E mail.

How to create bulk configuration files from a template for staging?

Hello,
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
Thanks in Advance,
Best Regards,

Hi,
Try this one http://www.gen-it.net
Regards,
Stuart

(nQSError:10018) Access for the requested connection is refused

Hi Techies,
Good Afternoon!!!
Recently I faced a problem when I tried to view the data of my table in PHYSICAL LAYER
(nQSError:10018) Access for the requested connection is refused
(nQSError: 43037) Invalid Catalog, SupplierSales, specified.
I did check my config file, every thing is proper. Even in NQSERVER log file it is showing that Finished Loading with out error.
Same with the case of Answers. When I tried to login with administrator, it is throwing the same error as in RPD.
I am unable to figure out the problem.

Check you System DSN , ODBC > System DSN > AnalyticsWeb
Make sure you have NOT enabled the "Change default repository to" or "Change default catalog to" as SupplierSales in either.
Hope this helps.
Thanks,
-VS

Multiple port opened for one db connection.

My java standalone server connects to sql server via MS sql JDBC driver(v 2.2). I saw so many port in Time_wait state to the db server in netstat. I did some search on the internet, found that this the nature of TCP/IP protocol. and we can live with it without modifying Windows config.
however, I noticed on my side, there are two ports involved for each database connection. I think this is one of the reasons I have so many ports in Time_wait state.
To me, it seems like the request to db server is done on one port, the response from db server is done on another port. is this implemented on JDBC driver layer or on sql server?
please help !!!

I saw so many port in Time_wait state to the db server in netstat. This suggests that you are not using any type of connection pooling, but instead are opening and closing connections pretty quickly, although it depends on what you mean by "many"; 10 or 100 might be a good number for a busy system, depending on your application. On some operating systems under high load, it could potentially be a problem if you are getting into many hundreds or thousands, but other issues usually drive people to using connection pools long before this issue would.
however, I noticed on my side, there are two ports involved for each database
connection. I think this is one of the reasons I have so many ports in Time_wait state.Not really. That might double the number, but the real reason is a lot of connection closes (real connection closes, not closes on a pooled connection).
To me, it seems like the request to db server is done on one port,
the response from db server is done on another port.
is this implemented on JDBC driver layer or on sql server?That is totally up to the driver vendor; there's nothing you can do about it.
please help !!!I'm not sure what you're problem really is - you might be worrying about something that isn't a problem. Is something bad happening that you're trying to fix, or did you just notice these expiring ports and start worrying about them?

Template for exciseable items in dtw

Hi,
where can we find template for exciseable items in dtw?we are on 8.8.
Thanks,
Mansoor

Hi Revathy,
I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
If it is one time effort you may just map them manually.
I hope I am making sense to you.
If you want us to try it out, give the name of the template, the content in the template may be few lines.

Config template for CE7.1 connect BI to Portal

Similar Messages

Maybe you are looking for