Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

Similar Messages

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

Video doesn't start from the beginning

Please tell me there is a setting on the iPod classic to always start a video from the beginning of the video??!?!?! I am using the iPod classic for video projection.
E.g.: I play video #1 until, say, 3:00. I select menu and go to another video or a song, a photo, whatever. I go back to video #1 and it starts at 3:00! WHY?
I want iPod Classic videos to ALWAYS start from the beginning.
Please tell me there is a setting for this.
thank you

I have good news for you, (compared to your other post!).
Select the video in iTunes and click on *File/Get Info* and look on the Options tab. Turn off the tick in *Remember playback position.* You can bulk select some or all your videos to do this.
Phil

HT1533 Help my iMac doesn't start from the white screen and apple and whirring gear icon.

Help! My IMac doesn't boot up ...just a white screen, apple and whirring gear. I tried turning it off and on and then turning it on while holding down the shift key but nothing.

Could be a HD failure. Gina please do 2 things, first is when you post it's imperative for us to know some things about your system so we can diagnose properly. We need to know what iMac you have, some basics about how it's configured and how much RAM is installed and most importantly the version of OS X installed. Without those basics it's very difficult. To get you started though, please carefully read and methodically follow Apple's instructions in Gray screen appears during startup

Firefox apparently doesn't start from the icon, but it says it is active when the computer is shut down.

Apparently Firefox is running, but I can't see any evidence of this on the screen. When I reboot the computer, usually I can call up and use Firefox as usual. This is quite a nuisance, as it happens several times an hour. No notification of a crash is provided, ever.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

Hello there, Elena Lyubina.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

Amol Soni wrote:
As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
Good luck with your appointment.
Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
AC

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please.

I can not resume when I downloaded the application from the Apple Store. If I have to start from the beginning of a solution to this too please. ?

Are you away from your home country?
Settings > General > International > Region Format > set to correct location?
Settings > Phone > Dial Assist > ON

I did this -- Windows 7 and Vista 1. Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. D

When I sign out of FF and want to go back in, I have to go through Task Mgr each time by deleting FF and then signing back in. I followed these directions -- Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. Delete the file xpicleanup.dat. 6. Restart Firefox. --- but I could not find Mozilla Firefox under 'Program Files'.
== This happened ==
Every time Firefox opened
== about a week ago

Where did you find those instructions to delete the '''xpicleanup.dat''' file?

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

In Flash the sound does not play only started from the beginning. Can anyone please help?

In Flash, the sound only plays if the file is started from the beginning. The sound doesn't play if starting from anywhere other than the beginning.
This is very frustrating when trying to sync the animation with the sound as it's not possible to scroll back and forward with the sound playing. The only way the sound works is if it is started from the beginning.
If anyone can help that would be fantastic.
Thanks

Hi Jeromie,
Many thanks for your help. Here is some additional information, which may shed light on the problem.
I am using Flash Professional CC 2014.0 release, Build 14.0.0.110
The computer I'm using is then iMac running OSX version 10.9.3 Build 13D65 2.7 GHz Intel Core i5
I am using Flash, not a web-based editor that leverages Flash Player.
"a direct link to the project or tool would be useful in allowing us to attempt to reproduce the problem" - Not sure how to do this, how can I add the project to the forum?
Many thanks once again for your help, let me know if you need more information.
Cheers
Michael

Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing Some of the application components are missing from the Application directory. Please reinstall the application. I have the pay monthly package and don't

Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.

Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

Config Tool doesn't start from the application list

Similar Messages

Maybe you are looking for