Config write key outputs data in Notepad++ with equal to sign
Hi,
I have a situation where I am trying to write data in Notepad++ using Write key VI in labview library.
THe data which I get is in the following format
but what i want want the output to be is this way
The probelm here is when we wire something to "value", it writes it with double quotes and if is it blank than it writes with =" ". Just to clear it "Class" and "Jammer Input MB/HB BPF" goes to the "key" wire.
I dont understand how to get rid of those quotes and equal sign.
Yamaeda wrote:
Strings are usually written with citation marks to handle spaces. You can deactivate that by wiring True to "write raw string".
/Y
I forgot all about that, since I haven't ever cared how it went in or came out. Nice.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Similar Messages
-
How to download output data into Excel with all Column Headings
Hi Experts,
Please tell me How to download output data of ALV Grid into Excel file with all Column Headings and I want to do this using coding,
please send me if any solution is available.
Thanks & Regards,
YogeshVERSION CONTROL (Most recent on top): *
DATE(mm.dd.yyyy) AUTHOR *
06.25.2007 Pattan Naveen *
Hi yogesh,,
Go through this in this u find ur solution.
report ZTEst_programe no standard page heading
line-size 100
line-count 50(5)
message-id zz.
*--alv type declaration
type-pools: slis.
*--Tables:
tables: anla,
anlz,
anlh,
anlb,
anlc.
data: v_pos type i.
data: v_ndjar type i.
data: v_ndper type i,
v_ndperndabp type i,
v_ndjarndabp1 type i,
v_ndjarndabp type i,
value type i,
date(10) type c value '2006.12.04'.
data: c_0000(4) type c value '0000'.
data: begin of it_final occurs 0,
anlkl(8),
bukrs(4),
anln1 like anla-anln1,
anln2 like anla-anln2,
txt50 like anla-txt50,
txa50 like anla-txa50,
anlhtxt like anlh-anlhtxt,
sernr like anla-sernr,
invnr like anla-invnr,
menge like anla-menge,
meins like anla-meins,
inken like anla-inken,
ivdat like anla-ivdat,
aktiv like anla-aktiv,
gsber like anlz-gsber,
kostl like anlz-kostl,
kostlv like anlz-kostlv,
werks like anlz-werks,
stort like anlz-stort,
raumn like anlz-raumn,
txjcd like anlz-txjcd,
ord41 like anla-ord41,
ord44 like anla-ord44,
gdlgrp like anla-gdlgrp,
anlue like anla-anlue,
lifnr like anla-lifnr,
typbz like anla-typbz,
aibn1 like anla-aibn1,
aibn2 like anla-aibn2,
aibdt like anla-aibdt,
posnr like anla-posnr,
vmgli like anla-vmgli,
invzu like anla-invzu,
ernam like anla-ernam,
erdat like anla-erdat,
afabe like anlb-afabe,
afasl like anlb-afasl,
ndjar like anlb-ndjar,
ndper like anlb-ndper,
afabg like anlb-afabg,
ndabj like anlc-ndabj,
ndabp like anlc-ndabp,
andsj like anlc-andsj,
andsp like anlc-andsp,
safbg like anlb-safbg,
umjar like anlb-umjar,
inbda like anlb-inbda,
kansw like anlc-kansw,
knafa like anlc-knafa,
kaafa like anlc-kaafa,
deakt like anla-deakt,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final.
data: begin of it_final_as91 occurs 0,
anlkl(8),
bukrs(4),
anln1 like anla-anln1,
anln2 like anla-anln2,
txt50 like anla-txt50,
txa50 like anla-txa50,
anlhtxt like anlh-anlhtxt,
sernr like anla-sernr,
invnr like anla-invnr,
menge like anla-menge,
meins like anla-meins,
inken like anla-inken,
ivdat like anla-ivdat,
aktiv like anla-aktiv,
gsber like anlz-gsber,
kostl like anlz-kostl,
kostlv like anlz-kostlv,
werks like anlz-werks,
stort like anlz-stort,
raumn like anlz-raumn,
txjcd like anlz-txjcd,
ord41 like anla-ord41,
ord44 like anla-ord44,
gdlgrp like anla-gdlgrp,
anlue like anla-anlue,
lifnr(10),
typbz(15),
aibn1 like anla-aibn1,
aibn2 like anla-aibn2,
aibdt like anla-aibdt,
posnr like anla-posnr,
vmgli like anla-vmgli,
invzu like anla-invzu,
ernam like anla-ernam,
erdat like anla-erdat,
end of it_final_as91.
data: it_download_as91 like it_final_as91 occurs 0
with header line."#EC NEEDED
data: begin of it_final_as92 occurs 0,
anlkl(8),
bukrs(4),
anln1 like anla-anln1,
anln2 like anla-anln2,
deakt like anla-deakt,
ernam like anla-ernam,
erdat like anla-erdat,
afabe like anlb-afabe,
afasl like anlb-afasl,
ndjar like anlb-ndjar,
ndper like anlb-ndper,
afabg like date,
ndabj(3) type c,
ndabp(3) type c,
kansw like anlc-kansw,
knafa like anlc-knafa,
kaafa like anlc-kaafa,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final_as92.
data: it_download_as92 like it_final_as92 occurs 0
with header line."#EC NEEDED
data: begin of it_values occurs 0,
anlkl(8),
bukrs(4),
anln1 like anla-anln1,
anln2 like anla-anln2,
deakt like anla-deakt,
afabe like anlb-afabe,
afasl like anlb-afasl,
ndjar like anlb-ndjar,
ndper like anlb-ndper,
afabg like date,
ndabj(3) type c,
ndabp(3) type c,
afabe_02 like anlb-afabe,
afasl_02 like anlb-afasl,
ndjar_02 like anlb-ndjar,
ndper_02 like anlb-ndper,
afabg_02 like date,
ndabj_02 like anlc-ndabj,
ndabp_02 like anlc-ndabp,
kansw01 like anlc-kansw,
knafa01 like anlc-knafa,
kaafa01 like anlc-kaafa,
kansw02 like anlc-kansw,
knafa02 like anlc-knafa,
kaafa02 like anlc-kaafa,
kansw03 like anlc-kansw,
knafa03 like anlc-knafa,
kaafa03 like anlc-kaafa,
kansw04 like anlc-kansw,
knafa04 like anlc-knafa,
kaafa04 like anlc-kaafa,
kansw05 like anlc-kansw,
knafa05 like anlc-knafa,
kaafa05 like anlc-kaafa,
kansw06 like anlc-kansw,
knafa06 like anlc-knafa,
kaafa06 like anlc-kaafa,
kansw07 like anlc-kansw,
knafa07 like anlc-knafa,
kaafa07 like anlc-kaafa,
kansw08 like anlc-kansw,
knafa08 like anlc-knafa,
kaafa08 like anlc-kaafa,
kansw09 like anlc-kansw,
knafa09 like anlc-knafa,
kaafa09 like anlc-kaafa,
kanza01 like anlc-kanza,
kaufw01 like anlc-kaufw,
kinvz01 like anlc-kinvz,
ksafa01 like anlc-ksafa,
kmafa01 like anlc-kmafa,
end of it_values.
data: it_values_xls like it_values occurs 0
with header line."#EC NEEDED
data: begin of it_itab1 occurs 0,
bukrs like anla-bukrs,
anlkl like anla-anlkl,
anln1 like anla-anln1,
anln2 like anla-anln2,
txt50 like anla-txt50,
txa50 like anla-txa50,
invnr like anla-invnr,
ktogr like anla-ktogr,
sernr like anla-sernr,
menge like anla-menge,
meins like anla-meins,
ivdat like anla-ivdat,
inken like anla-inken,
aktiv like anla-aktiv,
deakt like anla-deakt,
zugdt like anla-zugdt,
zujhr like anla-zujhr,
zuper like anla-zuper,
gdlgrp like anla-gdlgrp,
anlue like anla-anlue,
xafabch like anla-xafabch,
aibn1 like anla-aibn1,
aibn2 like anla-aibn2,
aibdt like anla-aibdt,
posnr like anla-posnr,
ord41 like anla-ord41,
ord44 like anla-ord44,
vmgli like anla-vmgli,
invzu like anla-invzu,
typbz like anla-typbz,
lifnr like anla-lifnr,
ernam like anla-ernam,
erdat like anla-erdat,
end of it_itab1.
data: begin of it_itab2 occurs 0,
bukrs like anlz-bukrs,
anln1 like anlz-anln1,
anln2 like anla-anln2,
bdatu like anlz-bdatu,
werks like anlz-werks,
gsber like anlz-gsber,
kostl like anlz-kostl,
kostlv like anlz-kostlv,
stort like anlz-stort,
raumn like anlz-raumn,
txjcd like anlz-txjcd,
ipsnr like anlz-ipsnr,
end of it_itab2.
data: begin of it_itab3 occurs 0,
bukrs like anlh-bukrs,
anln1 like anlh-anln1,
anlhtxt like anlh-anlhtxt,
end of it_itab3.
data: begin of it_itab4 occurs 0,
bukrs like anlb-bukrs,
anln1 like anlb-anln1,
anln2 like anla-anln2,
afabe like anlb-afabe,
bdatu like anlb-bdatu,
afasl like anlb-afasl,
ndjar like anlb-ndjar,
ndper like anlb-ndper,
afabg like anlb-afabg,
ndurj like anlb-ndurj,
ndurp like anlb-ndurp,
umjar like anlb-umjar,
safbg like anlb-safbg,
zinbg like anlb-zinbg,
inbda like anlb-inbda,
end of it_itab4.
data: begin of it_itab5 occurs 0,
bukrs like anlc-bukrs,
anln1 like anlc-anln1,
anln2 like anla-anln2,
gjahr like anlc-gjahr,
afabe like anlc-afabe,
zujhr like anlc-zujhr,
zucod like anlc-zucod,
ndabj like anlc-ndabj,
ndabp like anlc-ndabp,
kansw like anlc-kansw,
knafa like anlc-knafa,
kaafa like anlc-kaafa,
ksafa like anlc-ksafa,
andsj like anlc-andsj,
andsp like anlc-andsp,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
kmafa like anlc-kmafa,
end of it_itab5.
ALV DECLARATIONS
*--declarations for Xls sheet header field names
data: begin of it_head occurs 0,
column(70).
data: end of it_head.
data: begin of it_head1 occurs 0,
column(70).
data: end of it_head1.
*--type declarations for field catalog for basic report
data: it_fldcat_head type slis_t_fieldcat_alv,
wa_fldcat_head type slis_fieldcat_alv."#EC NEEDED
data : w_field type slis_fieldcat_alv."#EC NEEDED
data: it_fldcat_head1 type slis_t_fieldcat_alv,
wa_fldcat_head1 type slis_fieldcat_alv."#EC NEEDED
*--type declarations for layout design
data: wa_layout type slis_layout_alv.
*--type declarations for list header on grid
*data: top_of_page type slis_t_listheader.
*--declaration of variables
data : w_repid like sy-repid.
**selection-screen
select-options: s_bukrs for anla-bukrs,
s_anln1 for anla-anln1.
select-options: s_deakt for anla-deakt,
s_gjahr for anlc-gjahr obligatory,
s_anlkl for anla-anlkl,
s_date for anla-aktiv.
*selection-screen
selection-screen begin of block blk1 with frame title text-022.
selection-screen begin of line.
parameters : r1 radiobutton group g1 default 'X'.
selection-screen comment 20(50) text-020.
selection-screen end of line.
selection-screen begin of line.
parameters : r2 radiobutton group g1.
selection-screen comment 20(50) text-021.
selection-screen end of line.
selection-screen end of block blk1.
selection-screen begin of block blk2 with frame title text-023.
select-options: s_ernam for anla-ernam,
s_erdat for anla-erdat .
selection-screen end of block blk2.
*--INITIALIZATION
initialization.
w_repid = sy-repid.
at selection-screen.
if r1 = 'X'.
perform selection_screen_validation.
endif.
if r2 = 'X'.
perform selection_screen_validation.
endif.
*--START-OF-SELCTION
start-of-selection.
if r1 = 'X'.
perform populate-data.
perform fill_finaldata.
perform comment_build using top_of_page.
perform xls_output.
perform download.
endif.
if r2 = 'X'.
perform populate-data.
perform fill_finaldata.
perform fill_as92data.
perform putdata_horizontal.
perform xls_output_as92.
perform download_as92.
endif.
*--END-OF-SELCTION
end-of-selection.
if r1 = 'X'.
perform build_layout.
perform build_fieldcatalog.
perform top_of_page.
perform list-display.
endif.
if r2 = 'X'.
perform build_layout.
perform build_fieldcatalog1.
perform list-display1.
endif.
*& Form SELECTION_SCREEN_VALIDATION
text
--> p1 text
<-- p2 text
form selection_screen_validation.
*--validating originating company code
data: l_bukrs like anla-bukrs."#EC NEEDED
if not s_bukrs[] is initial.
select single bukrs from anla
into l_bukrs
where bukrs in s_bukrs.
if sy-subrc <> 0.
message e000 with text-001 .
endif.
endif.
*--validating originating main asset no.
data: l_anln1 like anla-anln1."#EC NEEDED
if not s_anln1[] is initial.
select single anln1 from anla
into l_anln1
where anln1 in s_anln1.
if sy-subrc <> 0.
message e000 with text-002 .
endif.
endif.
*--validating originating Deactivation date
data: l_deakt like anla-deakt."#EC NEEDED
if not s_deakt[] is initial.
select single deakt from anla
into l_deakt
where deakt in s_deakt.
if sy-subrc <> 0.
message e000 with text-004 .
endif.
endif.
*--validating originating asset class.
data: l_anlkl like anla-anlkl."#EC NEEDED
if not s_anlkl[] is initial.
select single anlkl from anla
into l_anlkl
where anlkl in s_anlkl.
if sy-subrc <> 0.
message e000 with text-006 .
endif.
endif.
*--validating originating Date
data: l_date like anla-aktiv."#EC NEEDED
if not s_date[] is initial.
select single aktiv from anla
into l_date
where aktiv in s_date.
if sy-subrc <> 0.
message e000 with text-007 .
endif.
endif.
*--validating originating Fiscal year which first acquisition was posted
data: l_gjahr like anlc-gjahr."#EC NEEDED
if not s_gjahr[] is initial.
select single gjahr from anlc
into l_gjahr
where gjahr in s_gjahr.
if sy-subrc <> 0.
message e000 with text-008.
endif.
endif.
data: l_ernam like anla-ernam."#EC NEEDED
if not s_ernam[] is initial.
select single ernam from anla
into l_ernam
where ernam in s_ernam.
if sy-subrc <> 0.
message e000 with text-009.
endif.
endif.
data: l_erdat like anla-erdat."#EC NEEDED
if not s_erdat[] is initial.
select single erdat from anla
into l_erdat
where erdat in s_erdat.
if sy-subrc <> 0.
message e000 with text-010.
endif.
endif.
endform. " SELECTION_SCREEN_VALIDATION
*& Form POPULATE-DATA
text
--> p1 text
<-- p2 text
form populate-data.
select bukrs
anlkl
anln1
anln2
txt50
txa50
invnr
ktogr
sernr
menge
meins
ivdat
inken
aktiv
deakt
zugdt
zujhr
zuper
gdlgrp
anlue
xafabch
aibn1
aibn2
aibdt
posnr
ord41
ord44
vmgli
invzu
typbz
lifnr
ernam
erdat
from anla
into table it_itab1
where anlkl in s_anlkl and
anln1 in s_anln1 and
deakt in s_deakt and
bukrs in s_bukrs and
aktiv in s_date.
if sy-subrc ne 0.
message e000 with 'Data does not exist'(094).
endif.
if not it_itab1[] is initial.
select bukrs
anln1
anln2
bdatu
werks
gsber
kostl
kostlv
stort
raumn
txjcd
ipsnr
from anlz
into table it_itab2
for all entries in it_itab1
where bukrs = it_itab1-bukrs and
anln1 = it_itab1-anln1 and
anln2 = it_itab1-anln2.
anln2 = '0000'.
if sy-subrc ne 0.
message e000 with 'Data does not exist'(094).
endif.
endif.
if not it_itab2[] is initial.
select bukrs
anln1
anlhtxt
from anlh
into table it_itab3
for all entries in it_itab2
where bukrs = it_itab2-bukrs and
anln1 = it_itab2-anln1.
if sy-subrc ne 0.
message e000 with 'Data does not exist'(094).
endif.
endif.
if not it_itab1[] is initial.
select bukrs
anln1
anln2
afabe
bdatu
afasl
ndjar
ndper
afabg
ndurj
ndurp
umjar
safbg
zinbg
inbda
from anlb
into table it_itab4
for all entries in it_itab1
where bukrs = it_itab1-bukrs and
anln1 = it_itab1-anln1 and
anln2 = it_itab1-anln2.
anln2 = '0000'.
if sy-subrc ne 0.
message e000 with 'Data does not exist'(094).
endif.
endif.
sort it_itab4 by bukrs anln1 anln2 afabe.
if not it_itab4[] is initial.
select bukrs
anln1
anln2
gjahr
afabe
zujhr
zucod
ndabj
ndabp
kansw
knafa
kaafa
ksafa
andsj
andsp
kanza
kaufw
kinvz
kmafa
from anlc
into table it_itab5
for all entries in it_itab4
where bukrs = it_itab4-bukrs and
anln1 = it_itab4-anln1 and
anln2 = it_itab4-anln2 and
anln2 = '0000' and
gjahr in s_gjahr.
if sy-subrc ne 0.
message e000 with 'Data does not exist'(094).
endif.
endif.
sort it_itab5 by bukrs anln1 anln2 ndabj ndabp.
endform. " POPULATE-DATA
*& Form FILL_FINALDATA
text
--> p1 text
<-- p2 text
form fill_finaldata.
loop at it_itab5.
loop at it_itab4 where bukrs = it_itab5-bukrs and
anln1 = it_itab5-anln1 and
anln2 = it_itab5-anln2 and
afabe = it_itab5-afabe.
it_final-afabe = it_itab4-afabe.
it_final-afasl = it_itab4-afasl.
it_final-ndjar = it_itab4-ndjar.
it_final-ndper = it_itab4-ndper.
it_final-afabg = it_itab4-afabg.
it_final-umjar = it_itab4-umjar.
it_final-safbg = it_itab4-safbg.
it_final-inbda = it_itab4-inbda.
it_final-ndabj = it_itab5-ndabj.
it_final-ndabp = it_itab5-ndabp.
it_final-kansw = it_itab5-kansw.
it_final-knafa = it_itab5-knafa.
it_final-kaafa = it_itab5-kaafa.
it_final-andsj = it_itab5-andsj.
it_final-andsp = it_itab5-andsp.
it_final-kanza = it_itab5-kanza.
it_final-kaufw = it_itab5-kaufw.
it_final-kinvz = it_itab5-kinvz.
it_final-ksafa = it_itab5-ksafa.
it_final-kmafa = it_itab5-kmafa.
read table it_itab1 with key bukrs = it_itab5-bukrs
anln1 = it_itab5-anln1
anln2 = it_itab5-anln2.
if sy-subrc = 0.
it_final-anlkl = it_itab1-anlkl.
it_final-anln1 = it_itab1-anln1.
it_final-anln2 = it_itab1-anln2.
it_final-bukrs = it_itab1-bukrs.
it_final-txt50 = it_itab1-txt50.
it_final-txa50 = it_itab1-txa50.
it_final-invnr = it_itab1-invnr.
it_final-sernr = it_itab1-sernr.
it_final-menge = it_itab1-menge.
it_final-meins = it_itab1-meins.
it_final-ivdat = it_itab1-ivdat.
it_final-inken = it_itab1-inken.
it_final-aktiv = it_itab1-aktiv.
it_final-deakt = it_itab1-deakt.
it_final-gdlgrp = it_itab1-gdlgrp.
it_final-anlue = it_itab1-anlue.
it_final-aibn1 = it_itab1-aibn1.
it_final-aibn2 = it_itab1-aibn2.
it_final-aibdt = it_itab1-aibdt.
it_final-ord41 = it_itab1-ord41.
it_final-ord44 = it_itab1-ord44.
it_final-vmgli = it_itab1-vmgli.
it_final-typbz = it_itab1-typbz.
it_final-lifnr = it_itab1-lifnr.
it_final-posnr = it_itab1-posnr.
it_final-invzu = it_itab1-invzu.
endif.
read table it_itab2 with key bukrs = it_itab5-bukrs
anln1 = it_itab5-anln1
anln2 = it_itab5-anln2.
if sy-subrc = 0.
it_final-werks = it_itab2-werks.
it_final-gsber = it_itab2-gsber.
it_final-kostl = it_itab2-kostl.
it_final-kostlv = it_itab2-kostlv.
it_final-stort = it_itab2-stort.
it_final-raumn = it_itab2-raumn.
it_final-txjcd = it_itab2-txjcd.
endif.
read table it_itab3 with key bukrs = it_itab5-bukrs
anln1 = it_itab5-anln1.
if sy-subrc = 0.
it_final-anlhtxt = it_itab3-anlhtxt.
endif.
append it_final.
clear it_final.
endloop.
endloop.
loop at it_final.
move-corresponding it_final to it_final_as91.
append it_final_as91.
clear it_final_as91.
endloop.
delete adjacent duplicates from it_final_as91 comparing anlkl bukrs
anln1 anln2.
it_download_as91[] = it_final_as91[].
endform. " FILL_FINALDATA
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form build_layout.
wa_layout-zebra = 'X'.
endform. " BUILD_LAYOUT
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
form build_fieldcatalog.
if it_fldcat_head is initial.
v_pos = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ANLKL'.
wa_fldcat_head-seltext_l = 'Asset Class'(093).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'BUKRS'.
wa_fldcat_head-seltext_l = 'Company'(092).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ANLN1'.
wa_fldcat_head-seltext_l = 'Asset No'(091).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ANLN2'.
wa_fldcat_head-seltext_l = 'Asset Sub No'(090).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'TXT50'.
wa_fldcat_head-seltext_l = 'Asset Des.'(089).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'TXA50'.
wa_fldcat_head-seltext_l = 'Asset Des.'(088).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ANLHTXT'.
wa_fldcat_head-seltext_l = 'Asset main no txt'(087).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'SERNR'.
wa_fldcat_head-seltext_l = 's.no/Expl no.'(086).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'INVNR'.
wa_fldcat_head-seltext_l = 'Inv No'(085).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'MENGE'.
wa_fldcat_head-seltext_l = 'Qtty'(084).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'MEINS'.
wa_fldcat_head-seltext_l = 'Units'(083).
append wa_fldcat_head to it_fldcat_head.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'INKEN'.
wa_fldcat_head-seltext_l = 'Inv indi.'(082).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'IVDAT'.
wa_fldcat_head-seltext_l = 'Last inv date'(081).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'AKTIV'.
wa_fldcat_head-seltext_l = 'Asset Capital date'(080).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'GSBER'.
wa_fldcat_head-seltext_l = 'Busin. Area'(079).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'KOSTL'.
wa_fldcat_head-seltext_l = 'cost centre'(078).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'KOSTLV'.
wa_fldcat_head-seltext_l = 'CC respon.for asset'(077).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'WERKS'.
wa_fldcat_head-seltext_l = 'Plant'(076).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'STORT'.
wa_fldcat_head-seltext_l = 'Asset location'(075).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'RAUMN'.
wa_fldcat_head-seltext_l = 'Room'(074).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'TXJCD'.
wa_fldcat_head-seltext_l = 'Tax. Jur.'(073).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ORD41'.
wa_fldcat_head-seltext_l = 'Evaluation Grp 1'(072).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ORD44'.
wa_fldcat_head-seltext_l = 'Evaluation Grp 4'(071).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'GDLGRP'.
wa_fldcat_head-seltext_l = 'Evalu. group 5'(070).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'ANLUE'.
wa_fldcat_head-seltext_l = 'Asset Super No'(069).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'LIFNR'.
wa_fldcat_head-seltext_l = 'Vendor Acct. No.'(068).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'TYPBZ'.
wa_fldcat_head-seltext_l = 'Reference no'(067).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'AIBN1'.
wa_fldcat_head-seltext_l = 'Original Asset Trans.'(066).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'AIBN2'.
wa_fldcat_head-seltext_l = 'Original Asset Trans.'(065).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'AIBDT'.
wa_fldcat_head-seltext_l = 'Trans. Asset'(064).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'POSNR'.
wa_fldcat_head-seltext_l = 'WBS Elt. Invt. Proj.'(063).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'VMGLI'.
wa_fldcat_head-seltext_l = 'Property clas.key'(062).
append wa_fldcat_head to it_fldcat_head.
V_POS = 0.
v_pos = v_pos + 1.
w_field-col_pos = v_pos.
wa_fldcat_head-tabname = 'it_FINAL_AS91'.
wa_fldcat_head-fieldname = 'INVZU'.
wa_fldcat_head-seltext_l = 'suppl.inv spec.'(061).
append wa_fldcat_head to it_fldcat_head.
endif.
endform. " BUILD_FIELDCATALOG
*& Form COMMENT_BUILD
text
-->P_TOP_OF_PAGE text
*form comment_build using top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
****Header
clear : ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'ASSET MASTER DATA LIST'.
append ls_line to top_of_page.
****Selection
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'Asset Records'.
append ls_line to top_of_page.
****Action
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'for AS91'.
append ls_line to top_of_page.
*endform. "comment_build
FORM top_of_page *
*form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = top_of_page.
*endform. "top_of_page
*& Form LIST-DISPLAY
text
--> p1 text
<-- p2 text
form list-display.
wa_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = wa_layout
it_fieldcat = it_fldcat_head
i_background_id = 'ALV_BACKGROUND'
tables
t_outtab = it_final_as91
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
write:/'No Top of Page'(098).
endif.
endform. " LIST-DISPLAY
*& Form DOWNLOAD
text
--> p1 text
<-- p2 text
form download.
perform setup_header.
call function 'DOWNLOAD'
exporting
filetype = 'DAT'
tables
data_tab = it_download_as91
fieldnames = it_head
exceptions
invalid_filesize = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
customer_error = 7
others = 8.
if sy-subrc <> 0.
write:/'Error in file Type'(097).
endif.
endform. " DOWNLOAD
*& Form setup_header
text -
Read Key and Write Key not working as expected with paths on RT
The configuration file VIs Read Key (Path) and Write Key (Path) don't seem to work as expected (at least not as I was expecting them to) on an RT target.
When working on my WinXP PC with these two VIs, paths are translated to what looks like is supposed to be a device-independent format before being written to disk. The path C:\dir\file.txt becomes /C/dir/file.txt when writing and vice versa when reading. On my RT target, however, that same path is written to disk as C:\dir\file.txt, unchanged from the native format.
The translaton of a native path to and from the device-independent format appears to be the responsibility of Specific Path to Common Path and Common Path to Specific Path. These both use the App.TargetOS property to determine the operating system. In the case structure for these two VIs, however, there is no case for PharLap or RTX. (My RT hardware is runnng PharLap; I don't know enough about RTX to comment.) This means that the results of String to Path or Path to String are used without translating between the device-independent format to the native path format.
This isn't a problem if you create a configuration file on one machine and use it on that same machine. I noticed this only when tranferring a config file from my PC to the RT target, where the target would not open the file paths it loaded from the configuration file.
This occurs on 7.1.1 and 8.0. I don't have 8.20 to see if happens there, too.In LV 8.2, this was fixed.
The problem is App.TargetOS returns "Pharlap" on RT systems, and "Pharlap" is handled by the default case ("invalid OS target") in LV 8.0. In LV 8.2 the default case is "Windows 95/NT", however. The reason you could write and read an .ini file on RT in LV 8.0 and earlier is because these two VIs (listed below) were both running the default case of "invalid OS target".
vi.lib\Utility\config.llb\Common Path to Specific Path.vi
vi.lib\Utility\config.llb\Specific Path to Common Path.vi
As you saw, this fails when you perform one operation in Pharlap but the other in Windows. You can fix this by modifying the two VIs listed above. Just go to the case structure and make "Windows 95/NT" the default case. -
Need to output data to TXT with static header and footer but multiple rows
Using APEX 4.0 and 11g - The only way I could find to get data out of APEX in TXT format was to use htp.prn. I load a cursor with the data and this works fine, the problem is that I need to have the file start with a string (*:P9_HEADER_STRING*) but it can only appear once in the output.
Is there a way to add the *:P9_HEADER_STRING* to the output in a single TXT file? or is there another way I should be doing this?
This is what I have now: The *:P9_HEADER_STRING* is in the loop which I know it can't be, but I can't figure out how to concatenate this string to the output from the loop. The rank() is being used because I can only send the selected number of records, ranked from highest. (I will have to do the same thing with a footer too, but that variable isn't in here yet)
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="cra_outgoing.txt"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in CLIENT_TABLE
for x in (select * from (select XREF_NBR
, TOT_AMT
, '' SPOUSE_INFO
, '' PHONES
, NAME
, SURNAME
, '' MARITAL_STATUS
, '' EMPLOYER_INFO
, GENDER
, '' CO_ADDRESS
, '' PREV_ADDRESS
, POSTAL_CODE
, ADDRESS1
, '' FILLER
, rank() over (order by tot_amt desc, rownum asc) rn
from client_table c where c.File_Seq_Nbr is NULL and c.xref_nbr in (select xref_nbr from ticket_table where to_char(ticket_issue_date, 'YYYY-MM-DD') between :P7_START_DATE and :P7_END_DATE))
where rn <= :P7_NUMBER_RECORDS)
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn( *:P9_HEADER_STRING* || '03' || lpad(X.XREF_NBR, 12) || lpad(x.TOT_FINE_AMT, 11, '0') || '0201'|| lpad(x.NAME, 30) || lpad(x.SPOUSE_INFO, 60) || '00000000000000000000'|| x.DATE_OF_BIRTH || '0000000000000000' || x.GENDER || x.MARITAL_STATUS || lpad(x.EMPLOYER_INFO, 60) || lpad(x.CO_ADDRESS, 102) || lpad(x.ADDRESS1, 30) || lpad(x.POSTAL_CODE, 9) || lpad(x.FILLER, 21) );
end loop;
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;Yes, I've already done that, hence this part of the code I pasted above:
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="cra_outgoing.txt"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in CLIENT_TABLE
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;
I've solved my problem by loading the cursor data into a variable (inside the loop) and concatenating the header info to it (outside the loop). This works when there are only a few records but as soon as I get to 32767 bytes it's throwing an error because of the size. So that's a different issue altogether. -
How to auto save instrument output data to Excel with preset file path and names
Hi,
I'm having this auto saving problem. The type of my instrument output is ''1-D array of cluster of two elements''. I tried to use ''Report Generation Toolkit", but it seems the data type doesn't match. Anybody got ideas about the data type conversion? Other possible approaches are also welcome!
Thanks!!What's in the cluster? Can you show us some code?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
I tried to use the config VIs to record some front-panel settings for later restoration, one of which could be a single space character (part of a string parsing system).
I soon discovered that whenever I tried to save that single-space value to an INI file, only a null string was saved.
After doing some digging I discovered that buried in the Write Key vi is a worker vi called Config Data Modify that uses Trim String on the string data before it is written to the file and that's what was eating my string character. I don't know whether this is a bug or a feature but there are at least three ways to fix it.
1) Assuming you want to leave the library VIs alone, you can pre-process any stings sent to "write key" to replace all spaces with "\20" and then post-process all strings read using "read key" to replace all instances of \20 with spaces.
and if you don't mind modifying the library VIs, either to save/use under a different name or to stick back into the library in a modified state (caution - can cause problems when you move code to another machine with an un-modified library) then...
2) You can yank the trim-string out of the Config Data Modify vi and hope that it does not have any undesirable side effects with regards to the other routines that use Config Data Modify (so far I have not found any in my limited testing)
or
3) You can modify the string pre-processing vi, Remove Unprintable Chars, to add the space character to the list of characters that get swapped out automatically.
Note that both option #1 (as suggested above) and option #3 will produce an INI file data entry that looks like key="\20Hello\20World\20" while option #2 produces an entry that looks like key=" Hello World "
The attached PDF contains screenshots of all this.
Attachments:
Binder1.pdf 2507 KBHi Warren,
there's a 4th option:
Simply set the "write raw string" input of the write key function to TRUE
This option only appears when a string is wired to that function!
Just re-checked:
I think it's a limitation of the config file format. It's text based and (leading) spaces in the value are "overseen" as whitespaces. So your next option would be to use quotes around your string with spaces...
Message Edited by GerdW on 05-02-2009 08:32 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
How to save pictures with the config file "Write Key.vi"
hi all,
On my front panel I've few controls pictures containing photos (JPG type) . The user can select the photo he wants using the classic file dialog box.
Usally I use the config files VI's to save the control values from one run to another one. In the config files VIs, I use the polymorphic "write Key.vi" wich accept only booean, I32, U32, path, and string dada type, but no picture !
I've tried the "flatten to string" fonction (picture --> flatten to string --> writekey.vi) , no broken wire but the conversion is very very too long and to heavy (20Mo a key!).
another way, would be to write in a xml file, I've also tried but I've always get the 1104 error: No end tag was found for an XML start/end tag pair.
can someone help me.
what is the best way for retrieving controls pictures with photosHi GerdW
Many thanks for your quick answer. Always happy to get advises from fellow programmers.
You suggest to use the "path" input of the "write key.vi" (configuration file utilities) to retrieve photos that a user would have selected in a previous run. Could be a good solution in a number of applications but what I would like to do is like in a excel or word file. Once a photo has been embeded in one xls file for ex., I find it back each time i open this xls file, even if the original photo's file has been deleted or if my application runs on another computer.
xml file looks interesting for that purpose (i mean used as config file). I can easily store in a xml file a labview picture (like a colored rectangle e.g.) but when i try with a photo (wich is a also a picture) labview returns always the error 1104.
How to fixe this error, or maybe there is another way to store photos in a config file without passing through xml,
kind regards. -
Problem with write key VIs (config-file)
Hi
My problem is this: when I use the write key VIs to write to an ini-file, the values are not written/updated in the ini-file. Does
anybody has a solution???
thank YOU!!!
Attachments:
writetest.vi 32 KBastroboy wrote:
Hi Dennis, writing key updates or add lines, but the problem is that it also causes all lines to be clumped together, making it unreadable.
What's the better way?
Clement
I was complaining about the poor formatting of the .ini files myself a couple years ago in this thread. http://forums.ni.com/ni/board/message?board.id=170&message.id=273552
I found the offending piece of code was buried pretty deep in the Config File VI hierarchy.
One idea is to go back after the file is written and find where all the section headers are and insert your own blank lines.
Also look at this thread http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=408776
You may also want to add kudoes to the config file idea in the Idea board. http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Comments-in-configuration-file-ini/idi-p/927874#A614
Message Edited by Ravens Fan on 09-17-2009 10:29 PM -
How to read/write data in Notepad?
Hi to all,
Im creating a simple application to write data in notepad using wireless toolkit 2.5. For that i have created a notepad file(raj.txt) manually and saved in the location "D:\WTK25\appdb\DefaultColorPhone\filesystem\root1\raja.txt". When i run in the emulator..Its shows the following exception " java.io.IOException : Root is not accessible". I got struck in this thing. For your convenience i have attached my source code also. Please correct and explain me
1. Where should i store the notepad file in Wireless Toolkit 2.5?
2. If i use wireless toolkit 2.5, What is the link should i give in the method Connector.open("file:///???")?
My source code:
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.io.*;
import javax.microedition.io.*;
public class FileConnection extends MIDlet implements CommandListener
private Display display;
private Form form;
Thread s=new Thread();
public FileConnection ()
display = Display.getDisplay(this);
form = new Form("Write To File");
form.setCommandListener(this);
public void startApp() throws MIDletStateChangeException
try
OutputConnection connection = (OutputConnection)
Connector.open("file://localhost/D:/WTK25/appdb/DefaultColorPhone/filesystem/root1/raj.txt", Connector.WRITE );
OutputStream out = connection.openOutputStream();
PrintStream output = new PrintStream( out );
output.println( "This is a test." );
out.close();
connection.close();
Alert alert = new Alert("Completed", "Data Written", null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
catch( ConnectionNotFoundException error )
Alert alert = new Alert("Error", "Cannot access file.", null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
catch( IOException error )
Alert alert = new Alert("Error", error.toString(), null, null);
alert.setTimeout(Alert.FOREVER);
alert.setType(AlertType.ERROR);
display.setCurrent(alert);
public void pauseApp() {}
public void destroyApp(boolean unconditional) {}
public void commandAction(Command command, Displayable displayable) {}
}Kindly read the below mentioned article links. You'll understand what is going wrong in your present implementation.
http://developers.sun.com/techtopics/mobility/apis/articles/fileconnection/
http://today.java.net/pub/a/today/2007/03/29/working-with-java-me-fileconnection-on-physical-devices.html
~Mohan -
Output data to txt file with full length of the field as in database
Hi
I have a problem related to output data I ntxt file on server
for eg
CONCATENATE
wa_sagadr_outtab-seqno
wa_sagadr_outtab-bpext
wa_sagadr_outtab-name_org1
wa_sagadr_outtab-country INTO wa_sagadr_text SEPARATED BY ''.
the output is separated by single space irrespective of database length of the field , I want to display all the lenth of the database field eventhough the remaining space is blank ie if a field is 20 char in dtabase and only filled with 6 char the whole 20 char lenth should be displayed in the output file
ouput as below
required format ie space equvalent to as in database lenght
000001 700006 C4 Plant AMD Export Sdn.Bhd.so on.
my format as coming single space in between only
000001 700006 C4 Plant AMD Export Sdn.Bhd
pls suggestFor this maintain an work area with the fields and structure same as the one which you want.
ten populate the work are and write to file.
concatenate will not work.
e.g.
DATA: begin of wa_sagadr_text,
seqno like wa_sagadr_outtab-seqno,
bpext like wa_sagadr_outtab-bpext,
name_org1 like wa_sagadr_outtab-name_org1,
country like wa_sagadr_outtab-country
end of wa_sagadr_text,
clear wa_sagadr_text.
wa_sagadr_text-seqno = wa_sagadr_outtab-seqno.
wa_sagadr_text-bpext= wa_sagadr_outtab-bpext.
wa_sagadr_text-name_org1 = wa_sagadr_outtab-name_org1.
wa_sagadr_text-country = wa_sagadr_outtab-country INTO wa_sagadr_text.
transfer wa_sagadr_text to outputfile
or write:/ your fields. -
Convert Script output data to Text(.txt) file & send mail with attachment.
Hi All,
Requirement: I shulb be able to conver th Script output data to Text(.text) file & send a maill with attachment with this text file. Formant of text file should be like output of Print priview.
Plese sugget with Function modules to cover as Text file.
I am able to converting the Script output data to PDF and sending mail with attachment. So I don't want PDF file now.
Thanks in advance.Hi, Thanks for responst.
We can convert the Scirpt output to PDF file by using OTF function module and the PDF file looks like Print Privew output.
Same like this I want Script out in NOTEPAD (.txt). Is that possible, Plz sugget with relavent Function Modules.
Thanks. -
Copy Key figure data between two planning area with different storage bucket profile
Hi,
I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil -
Using ini-files with write-key/read-key (double) and defined accurarcy
Hello,
in a popup the user can insert a numeric-double-value.
This value is saved in a ini-file using the Write-key-vi with Type = double. Works fine.
What do i have to do to set the values after the comma?
So if user inserts 1,532 i want to round to two digits after comma and save it. (-> 1,53)
Thx
Solved!
Go to Solution.I don't know how LV deals with different decimal seperators (e.g. comma instead of point), I guess it 'just works' depending on the system locale.
A few different options are available as follows...
The Write Key function has a 'precision' input which will set the number of decimal places to save the DBL to (in your case, set this to 2):
If you are using a numeric field, you can set the 'increment' property with 'coerce to nearest' to prevent them from entering more precision than is available:
The obvious method for post-rounding the input is to scale up the number, round to the nearest integer and then divide again to limit the precision:
I couldn't see anything in the numeric/math palettes that does this.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Is there a translator for garageband-output-data available to numerical data to postprocess these data with mathematical tools like Fourier decomposition.
I'm not sure I understand what you want to do - but if you want to analyze the composite audio signal, just share the GB project to an audio file on your hard disk and keep working on the resulting AIFF.
-
Use of Write Key VI with an array of cluster
Hi,
I wanted to use an array of clusters to define some configuration parameters for an application. Unfortunately, "Write Key VI" doesn't support the cluster type. Has anybody modified this function ("Write Key VI") to support cluster and array of cluster? If not, any clue to keep it as simple as possible?
My clusters include boolean, path, U32 and string.
Thank you,
Olivier
Solved!
Go to Solution.OD wrote:
Couldn't log to this website. Any alternative ?
Sure see this Nugget.
I have links for other methods included but the Nugget does exactly what you are asking to do. I wrote th Nugget to entertain other developers, but in the end is serves as an example why you may want to find another approach. You'll understand what I mean once you look at that Nugget.
Parapharisng from Jurrasic Park "Just because could do something does not mean we should."
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Maybe you are looking for
-
My printouts from web pages using the previous firefox and internet explorer products work.
-
Does LiceCycle Designer support different languages
We would like to roll out a US based form to other non english speaking countries. Is it possible to design a form in different languages ? if so, where can I find more information on it ? Thanks Aditya
-
hi all, I need to know abt customer workplace.......... i means : Customer Workplace (CWP) allows customers access to a clients SAP System. ....... Can anybody help me with the material on the same or any place i can find them Rgds Thnaks in adv.
-
Hello, Can anyone tell me how I can create a transport for and ABAP Program. It is currently in DEV but needs to go to test. Thanks
-
Signed up to CC Photography program. Photoshop asking for serial number
Signed up to Photoshop photography program.Lightroom installed and is working fine but photoshop is not, itkeepsasking me for a serial number even after I have signed into my account. I was using photoshop trial before I subscribed so I thought maybe