ConfigLab Installation with CC&B v 2.3.1
Hello,
I need to install and enable the ConfigLab feature on Oracle CC&B version 2.3.1.
On the Admin Menu->I-> Install framwork option -> Accessible Modules, the "remark" column for the module "Configuration lab" is shown as blank. Does this mean it is installed but not enabled?
Alternatively, if this module has to be installed separately, Can anybody tell which installer is needed? On e-delivery there is no installer corresponding to this (either a separate installer or bundled).
Any help would be appreciated.
Thanks
The module is implicitly enabled if an entry does not exist in Feature Configuration 'F1_MODULECFG', for Configuration Lab it's module 'CL'.
Online help is your friend in addition to other KB articles mentioned in the previous post.
Similar Messages
-
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
Multiple independent devices on Single installation with independent monthly rental charges
Hi Experts,
4 Independent single register based devices installed (Tech+ Billing) in a single installation with same time slice. There is only monthly rental charges for each independent meter. No meter reading required and NO consumption charges. I believe we can do this scenario. Can anybody advise for any consequences?
Note: number of devices can change from 2/3/4.Hi,
How are you going to satisfy the meter read orders to make it billable without entering the meter reads? If you do not need any meter read, can't you use any flat rate / time dependent prices? The amount output will be same but you will not be using any settle* variant program. You may use any Lumsum* variant program. If you do not use the devices for entering meter read, do you have any requirement of installing the devices with the utility installation?
Thanks.
Nirmalya -
hi, my software for example games , installation with another apple id and i want to update software but i cant , how can do this change ? i should go to itunes store to do this change or i cant at all?
you can change your apple id or password etc here http://www.apple.com/support/appleid/
Good Luck
Matthew -
Error in installation with NW04S
Hi,
error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
Thanks & Regards
kiran.BHi,
Assign the Role <b>SAP_BC_JSF_COMMUNICATION_RO</b> to the profile of SAPJSF user in production client and restart the installation.
Regards,
Siddhesh -
SAP R-3 IDES 4.71 installation with Oracle9i
Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting... -
[Solved]Can't finish The Hobbit installation with virtual drive
Is there any way that I could combine two iso files into one so that I could finish The Hobbit installation process. I always get stuck at the point where it asks for the second disk and gnome-disk-utility won't unmount the first ISO because it's still in use by the installation process.
I tried doing this
$ sudo mount -t iso9660 -o loop disc1-mountpoint
$ sudo mount -t iso9660 -o loop disc2-mountpoint
$ sudo mkisofs -l -J -R -o dvd.iso disc1-mountpoint disc2-mountpoint
and here's what I got
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using BILBO000.ICO;1 for /bilbo.ico (bilbo.ico)
Using AUTORUN000.INF;1 for /Autorun.inf (Autorun.inf)
genisoimage: Error: '/media/dc/bilbo.ico' and '/media/live/bilbo.ico' have the same Rock Ridge name 'bilbo.ico'.
genisoimage: Error: '/media/dc/Autorun.inf' and '/media/live/Autorun.inf' have the same Rock Ridge name 'Autorun.inf'.
Unable to sort directory
NOTE: multiple source directories have been specified and merged into the root
of the filesystem. Check your program arguments. genisoimage is not tar.
So here's what I'm currently trying right now.
$ cat HobbitCD1.iso > The_Hobbit.iso
$ cat HobbitCD2.iso >> The_Hobbit.iso
Okay, so doing that didn't return any errors, now to see if I can finish the installation with the new ISO file.
Nope it still asks for disk 2. So the real question is how can I force the first disk to unmount so that I can replace it with the second disk?
Last edited by lspci (2012-08-23 22:40:14)progandy wrote:Why don't you try this?
Manually mount the first iso image, begin installation, forcibly unmount old iso, mount new iso, continue installation.
Oh, you can forcibly unmount something?!
(read the manpage for umount)
Oh, whaddaya know, you can.
from umount's manpage
-f Force umount (in case of an unreachable NFS system). (Requires kernel 2.1.116 or later.)
I dunno why I didn't think to check the manpage for umount. Sorry, my bad.
EDIT: Okay, so forcibly unmounting the iso didn't work. I was able to force umount, but I couldn't disassociate the /dev/loop2 from the HobbitCD1.iso file. losetup doesn't seem to support forcing. I think that I better just install this under Windows and then copy and paste the installed files to my external hard drive and then move them onto my laptop from there. =/ Not really what I was looking for, though.
Last edited by lspci (2012-07-30 11:53:58) -
Can Packagemaker create installer with content files outside the bundle?
I'm trying to create an installer with Packagemaker, but the content files need to be outside the final bundle because they're shared with a Windows installer.
I thought I could create a symbolic link to the external folder, but instead of linking from the installer, it copied the files into the bundle. Any idea how to do this, or if it's even possible? I need to be able to do this on 10.3+, if that's relevant.
(I can give a more specific scenario if this isn't clear enough)
Thanks!zekel wrote:
The main issue I'd be worried about is that the external files (which are quite large) won't have the appropriate progress bar. The external files are around 1GB, while the internal files are in the 30MB range.
How about installing a secondary installer with progress bar that copies these files from the correct location. Your postflight script can just kick off the newly installed file copier.
How's this sound for a hack...
Have a launcher script copy the installer to /tmp, then modify the package to point my files. (I'm installing from read-only media.) It would then open the modified installer which would pull my files from the DVD. This would probably work better (read: at all) if the files aren't compressed inside the package. Do you know if that's an option?
No, sorry. The internals of a package are quite specific. You need PackageMaker itself to build them.
Things like the receipts are non-essential at this point, only because if I can't get this to work then we will continue to use our terrible installer which leaves none of those things. Those shouldn't be too much trouble if I can get the rest to work.
There are some 3rd party installers like Installer VISE. The sad part is that they tend to make the MacOS X Installer look good.
If the guy responsible for that is interested I'll show him Inno Setup, but we have a working Windows installer, so he probably won't want to mess with it.
I agree, but tell him about it anyway. The next time you have to build a Windows installer, he could use Inno Setup and get it done in a couple of hours and then have time to help with the mess that is software deployment on MacOS X. -
Oracle 11gR2 RAC installation with DNS
Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena -
It is possible to include the jre(not the installer) with the application?
Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
If so please provide me instructions,how to do it.
Thanks
IsmaSee http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html
-
HT5622 how can change apple id that software installation with another apple id?
my software installation with another apple id , i want to update software for expample games, i cant do this , what can i do to change thats apple id?
Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
(94041) -
Problem with NW04s SR2 installation with MS SQL Server 2000 SP4
Im struggling with the NW04s installation with MS SQL Server 2000.
The installation stops at the step Create/modify database schema SAPJ2EDB.
The following error/info from log file,
INFO 2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
showDialog()
Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
INFO 2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
showDialog()
Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:58 [ianxbservi.cpp:697]
CIaNtServices::stop(const map<iastring,iastring>&)
The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:10 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
showDialog()
Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
ERROR 2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
ERROR 2007-06-06 12:03:40
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
showDialog()
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
ERROR 2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Please let me know if you can help or if there is any other way around.
Many Thanks in advance.
Ritin JainHi All,
I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
You have to chhose the following settings while instalation,
Service Account - Select one of the following options:
1) Use the built-in System account for each service and choose Local system or Network Service.
2) Use a domain user account, and enter the user name and password.
Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
Authentication Mode
1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
This mode is required for a Java or ABAP+Java system.
If you choose this mode, you have to set the password for the sa login.
Note: The password for the sa login must comply with the Windows password policy.
Collation Settings
1) Select SQL collations (used for compatibility with previous versions of SQL Server).
2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
I hope this helps! -
Building installer with 8.5
I have built an application with Labview 8.5 and am trying to build an installer with the 8.5 runtime engine for a stand alone program. However the exe builds okay, but when I try to build the installer I get a message saying some components need to be load from real-time module 8.6.1 and it asks for the directory of the nist.id. I am not using any real time in my application. It seems as though this started popping up after I installed Labview 8.6. Anyone have any Ideas.
Regards,
WadeThanks for the Reply and link. I just placed the Labview disk in the disk drive and selected that directory so the installer builder could locate the file it was looking for, and then cached it. However I am curious as to why all of the sudden it needs the real time module 8.6.1. If my only additional installer is RT engine 8.5. Before I upgrade to NI DAQ 8.8 that came with LV 8.6 I hadn't gotten this request for the RT Module components while only requesting the RT engine for an additional installer. Anyways its no big deal now that I have the file cached. It doesn't ask anymore. Thanks.
Wade -
SAP ECC6.0 installation with Oracle RAC
Hi Expert,
Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
#./sapinst SAPINST_USE_HOSTNAME=ascs00
But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP? Please advice.
Regards.And then I'd continue with the documentation at:
SAP on Oracle => SAP on Oracle Real Application Clusters (RAC)
There you can find several installation guides for windows/UNIX/Linux -
Problem in building an Eclipse installation with oomph
Hallo,
I am setting up an Eclipse distribution with several plugins needed to have a proper IDE for an Eclipse Project (GEF).
When adding the plugins to Eclipse everything is Ok, until I install the Oomph Version Management Tool plugin.
After installing the Oomph VMT Plugin, from the next startup I see the below error:
Plugins contained in the Eclipse distribution.
As specified in the GEF contributor guide, the GEF-IDE consists of
Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
Oomph Version Management Tool, from Oomph update site
After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
An internal error occurred during: "Setup check".
USER_HOME
I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see bug 473599.
Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core , but only for a small "delta"
I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the bug 473599.
So, I have two questions:
how to perform a Complete IDE Update ?
how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
Thank you very much for the time you're spending on my question.
I hope my question does not seem impolite or excessively complex.
Regards.Hi Patrik,
The p2f file that you mentioned in https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599 seems totally useless to me. It
locks in specific versions of the listed IUs, no matter whether the identified repositories will provide those versions
in the future or not. For example:
<iu id='org.eclipse.oomph.setup.feature.group' name='Oomph Setup' version='1.2.0.v20150720-0925'>
<repositories size='2'>
<repository location='http://download.eclipse.org/oomph/updates'/>
<repository location='http://download.eclipse.org/oomph/updates/latest'/>
</repositories>
</iu>
A P2Director task in an Oomph setup model for GEF seems like a better alternative.
More comments below...
Cheers
/Eike
http://www.esc-net.de
http://thegordian.blogspot.com
http://twitter.com/eikestepper
Am 27.07.2015 um 22:44 schrieb Patrik Suzzi:
> Hallo,
>
> I am trying to build a complex eclipse installation needed for development of the Eclipse GEF project.
>
>
>
> As specified in the GEF contributor guide, the GEF-IDE consists of
>
> Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
> API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
> e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
> m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
> Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
> Oomph Version Management Tool, from http://download.eclipse.org/oomph/updates
>
>
> During the installation everything is Ok, until I install the last plugin: the Oomph Version Management Tool.
>
> After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
>
> An internal error occurred during: "Setup check".
> USER_HOME
>
>
>
> I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core .
>
>
>
> I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> So, I have two questions:
>
>
> how to perform a Complete IDE Update ?
I'm not 100% sure but I think you can't easily get out of this inconsistent state because the plugins that would do that
for you are also impacted. I would recommend that you create a new installation with Oomph's Eclipse Installer.
> how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
I would suggest that you put pressure on the GEF people to provide a GEF project setup model, so that you can just add
it to your install.
Maybe you are looking for
-
"Waiting for RAID Controller F/W to become ready..."
Hello Lately I have been getting this message more often than not -- before Windows 7 (not) booting: "Waiting for RAID Controller F/W to become ready..." Any suggestions? I have a Areca ARC-1680D-IX 12-ports SAS RAID Thanks Rowby
-
Order by decode statement with Union all
Hi I use Database Version: Oracle 9.2.0.1.0 OCI version 9.2 I try to use order by decode while i have a select base on union and I get en error: ORA-01785: ORDER BY item must be the number of a SELECT-list expression Here is my code: select catalog_t
-
How do I set pages up so that I can type a script for a radio play
here we go, that is if I'm not driven mad by the process of trying to work out how to use this help thing. how do I set pages up so that I can type a script for a radio play ie the character then as an indented bit what they say
-
I am trying to download the free trial Adobe Acrobat XL Pro.
It looks like it's downloading and then it does nothing. I have tried many times to do this and it simply will not continue to download. I am using Vista Home. Any help will be greatly appreciated. Tom Ruffen
-
I don't know what to do! ibook G4 slowness issues
I have had my ibook for a little less than 2 years and recently started experiencing the computer running very slowly. It boots at about half speed, and takes about twice as long for webpages to load, and I cannot have more than one program open or n