ConfigMgr 2007 Management Point Health: State

I am getting this, how to fix this issue. SCOM 2012
Any body knows the triage to fix this issue
Manjish

Hi,
Verify that the SMS Agent service is running.
Check the MPControl.log file and component status for MP_CONTROL_MANAGER for more details.
ConfigMgr 2007 Management Point Health: State Rule
http://mpwiki.viacode.com/default.aspx?g=posts&t=119435
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

SCCM 2007 Management Point

Hello ,
With example :
There are 10 clients reporting to ABC management point and I was change to XYZ management point ....!
I removed the Site IP Subnets from ABD and registered into XYZ
I removed System Management Container for the ABC Name
But I am getting updates from ABC only
I want to get from XYZ ....For this anything I need to do help me on the same
Thanks
Best Regard's Krishna

Is XYZ a new MP that is part of the primary site or part of a child secondary site?
A little bit of background and more detail will help us help you.
Jason | http://blog.configmgrftw.com

WEBLOGIC MANGED SERVER HEALTH STATE IS UNKNOWN

Dear Team,
I am working as support engineer in a production environment.
I am facing some issue described below:
1. One of Weblogic managed server health state is WARNING. I have checked in managed server log and found below error:
<Jun 22, 2014 5:13:37 AM IST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "7,222" seconds working on the request "Workmanager: nlsi/wm/MarshallerWorkManager, Version: 0, Scheduled=true, Started=true, Started time: 7222299 ms
", which is more than the configured time (StuckThreadMaxTime) of "7,200" seconds. Stack trace:
As the Health is in warning state managed server become fully unresponsive.
Now I have following query:
1. What is the risk if managed server health state is WARNING?
2. Is Stuck thread will make the server go into an Unknown state?
3. If managed server state in UNKNOWN then what is the risk?
3. Could you please provide any solution so that in future we should not face this WARNING health state.
4. Could you please investigate why this health state WARNING occur?
Please help me.
Regards,
Maity

Dear Team,
I am working as support engineer in a production environment.
I am facing some issue described below:
1. One of Weblogic managed server health state is WARNING. I have checked in managed server log and found below error:
<Jun 22, 2014 5:13:37 AM IST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "7,222" seconds working on the request "Workmanager: nlsi/wm/MarshallerWorkManager, Version: 0, Scheduled=true, Started=true, Started time: 7222299 ms
", which is more than the configured time (StuckThreadMaxTime) of "7,200" seconds. Stack trace:
As the Health is in warning state managed server become fully unresponsive.
Now I have following query:
1. What is the risk if managed server health state is WARNING?
2. Is Stuck thread will make the server go into an Unknown state?
3. If managed server state in UNKNOWN then what is the risk?
3. Could you please provide any solution so that in future we should not face this WARNING health state.
4. Could you please investigate why this health state WARNING occur?
Please help me.
Regards,
Maity

Outboxes/Stat.box backlog on Management Points

I have an SCCM infrastructure with a number of management points. I am having a problem where clients are not reporting the status of their software distribution back to the primary site. The software seems to install properly, but the deployment
has no status messages after the deployment was originally created. Under Deployment Status, they all read "Status information is currently unavailable for this deployment". I have tried to "Run Summarization" but no change.
I looked closed at my management points and I see that the outboxes/stat.box folder is filled with MTMP files. If I open the files with Notepad it looks like these are related to the deployments as they have a package ID and a program name in them.
I do not see any errors in my log files for the MP though. Everything looks like it is churning properly, but these files just keep stacking up.
I am having a lot of trouble finding any documentation on this particular outbox or the files themselves. Can anyone point me to a flowchart that depicts what this process looks like and the associated log files? Any assistance would be appreciated.

There is only one entry in the view where the FeatureType = 2 (software deployment I believe) where there are success or inProcess values. Everything else shows NumberUnknown = NumberTotal. Other deployments for OSD (FeatureType = 7) show properly
and Software Updates (I think, FeatureType = 5) are showing numbers for Success and In Process. It looks like the problem may just be with status messages on software deployments.

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Cleanup disk space on SCCM Management point server

Hi all
I have a SCCM 2007 infrastructure with 1 primary site and three secondary sites.
The disk data D of a sccm management point of one secondary site is full.
Is it possible cleanup data from a sccm tool??
Regards
Christian

if you have other drives with enough space,you can create no_sms_on_drive.SMS and place it on the root folder to avoid storing the packages.
couple of posts on how to deal with PCK Files:
http://eskonr.com/2012/10/how-to-move-pck-files-to-different-drive/
http://eskonr.com/2013/09/sccm-2007-script-to-delete-old-pck-files-from-smspkg-folder-avoid-disk-space-issues/
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Management Point will not install

Hi,
I am using Windows Server 2012, SQL 2012 with cu2 and SCCM 2012 sp1, and I have one Primary site which will host all site roles.
I am trying to install the Management Point (using HTTPS for client connections) but it fails.
I did have the SCCM 2007 client install on this server which was delivering windows updates and FEP 2010 to the server, so after seeing a similar proplem reported and looking throught the msisetup log which said a previous version was detected, I used ccmsetup
/uninstall to remove the client (which gets rid of it from control panel), and then removed the MP, rebooted and tried to install the MP again. However, the MP still wont install
mpmsi log as below:
[9:53:33] Failed to compile 'D:\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\CCMVDI.mof'
[9:53:33] Compiled 'D:\SMS_CCM\ccmauthmessagehook.mof'
[9:53:33] Compiled 'D:\SMS_CCM\LocationServices.mof'
[9:53:33] Compiled 'D:\SMS_CCM\NetworkConfig.mof'
[9:53:33] Failed to compile 'D:\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\PolicyAgentEvents.mof'
[9:53:33] Failed to compile 'D:\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[9:53:33] Failed to compile 'D:\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\CcmExec_MPFramework.mof'
[9:53:33] Compiled 'D:\SMS_CCM\SmsCommon.mof'
[9:53:33] Compiled 'D:\SMS_CCM\XmlStore.mof'
[9:53:33] Compiled 'D:\SMS_CCM\InventoryAgentEvents.mof'
[9:53:33] Compiled 'D:\SMS_CCM\SWMtrEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SWDistEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SrcUpdateEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\PatchMgmtEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SMSNapEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\MpStatusForwarderDefaults.mof'
[9:53:34] Failed to compile 'D:\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
[9:53:34] Compiled 'D:\SMS_CCM\mp_pss.mof'
[9:53:34] Compiled 'D:\SMS_CCM\mp_ccmConfig.mof'
[9:53:34] Compiled 'D:\SMS_CCM\mp_ccmConfig_Defaults.mof'
[9:53:34] Compiled 'D:\SMS_CCM\MpEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\OSDEventClasses.mof'
[9:53:34] Compiled 'D:\SMS_CCM\DPStatus.mof'
[9:53:34] Compiled 'D:\SMS_CCM\ImgDeployEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\DCMClientEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\SUMEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\OOBMgmtEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\PwrEvents.mof'
[9:53:35] @@ERR:25140
MSI (s) (8C!1C) [09:53:35:212]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (8C:70) [09:53:35:241]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (8C:70) [09:53:35:248]: User policy value 'DisableRollback' is 0
MSI (s) (8C:70) [09:53:35:248]: Machine policy value 'DisableRollback' is 0
Action ended 09:53:35: InstallFinalize. Return value 3.
MPsetup.log is below:
<01/17/13 09:52:54> SMSMP Setup Started....
<01/17/13 09:52:54> Parameters: D:\SCCM\bin\x64\rolesetup.exe /install /siteserver:SCCM01 SMSMP 0
<01/17/13 09:52:54> Installing Pre Reqs for SMSMP
<01/17/13 09:52:54> ======== Installing Pre Reqs for Role SMSMP ========
<01/17/13 09:52:54> Found 2 Pre Reqs for Role SMSMP
<01/17/13 09:52:54> Pre Req MSXML60 found.
<01/17/13 09:52:54> No versions of MSXML60 are installed. Would install new MSXML60.
<01/17/13 09:52:54> Enabling MSI logging. msxml6_x64.msi will log to D:\SCCM\logs\msxml6_x64MSI.log
<01/17/13 09:52:54> Installing D:\SCCM\bin\x64\00000409\msxml6_x64.msi
<01/17/13 09:52:54> msxml6_x64.msi exited with return code: 0
<01/17/13 09:52:54> msxml6_x64.msi Installation was successful.
<01/17/13 09:52:54> Pre Req SqlNativeClient found.
<01/17/13 09:52:54> SqlNativeClient already installed (Product Code: {D9DDE0F8-0CFD-4C0F-8A07-C815DE47FF4D}). Would not install again.
<01/17/13 09:52:55> Pre Req SqlNativeClient is already installed. Skipping it.
<01/17/13 09:52:55> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<01/17/13 09:52:55> Installing the SMSMP
<01/17/13 09:52:55> Passed OS version check.
<01/17/13 09:52:55> IIS Service is installed.
<01/17/13 09:52:55> No versions of SMSMP are installed. Installing new SMSMP.
<01/17/13 09:52:55> Enabling MSI logging. mp.msi will log to D:\SCCM\logs\mpMSI.log
<01/17/13 09:52:55> Installing D:\SCCM\bin\x64\mp.msi CCMINSTALLDIR="D:\SMS_CCM" CCMSERVERDATAROOT="D:\SCCM" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=63 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/17/13 09:55:52> mp.msi exited with return code: 1603
<01/17/13 09:55:52> Backing up D:\SCCM\logs\mpMSI.log to D:\SCCM\logs\mpMSI.log.LastError
<01/17/13 09:55:52> Fatal MSI Error - mp.msi could not be installed.
<01/17/13 09:55:52> ~RoleSetup().
<01/17/13 09:59:03> ====================================================================
Has anyone seen this problem before and could advise me on a fix? The DP has installed fine.
Thanks
Jaz

Im having the same issue in our LAB's...
Install is a Win 2012 + SCCM 2012 SP1 + MSSQL 2008R2 SP2
In this environment I had Win 2008R2 SP1 + SCCM 2012 + MSSQL 2008R2 SP2 previously without any issues but have blown it all away as we are going the Win2012 and SCCM 2012 SP1 way.. Running inside the environment is a SCCM 2007R3 instance.. Currently testing
migration.
Win2012 doesn't have the agent from SCCM 2007 R3 installed
mpMSI.log
MSI (s) (1C!5C) [17:52:23:024]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried the ccmclean and UAC has been disabled from the start..
Any help would be awesome

How Do I create a health state dashboard for a group of servers in SCOM 2012 R2

I am aiming to create a health state dashboard which would show the agent health for a particular group of server. But unable to find the option for the appropriate widget. Can somebody suggest how should I proceed on this?

There is state widget for show status of computer health or warning or critical
http://blogs.technet.com/b/antoni/archive/2013/05/13/operations-manager-2012-dashboard-widgets.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Operations Manager powershell health check on specific items

Hello,
I am trying to write up a Operations Manager PowerShell script that runs automatically and checks the current health status of a group object but only the health status of certain columns listed in the Operations Manager such as "Agent" or "Windows
Server 2008 Logical Disk". I have written up the following after setting the group object whose health I wish to check in Operations Manager to "$gp". Also note I am only looking for systems in that group object that show an unhealthy state
hence I put in the "Where-Object" to look for anything that is not showing a healthy status.
Get-SCOMMonitoringObject -Group $gp | select HealthState,Displayname | Where-Object {$_.HealthState -notlike "Success"}
This brings back the overall health state of each system in the group object but I do not want the overall health. I wish to only see the health status of say the "Windows Server 2003 Operating System" column in Operations Manager for those systems.
I would like to know if there is a simple way to accomplish this using the built in Powershell cmdlets which come with Operations Manager when it installs. If I could also get an example of what the syntax of this would look like that would be a great help.
Thanks!

Thank you for the responses!
I am currently running the 2012 edition of System Center Operations Manager.
The above code posted by
Alexey Zhuravlev runs for me but it does not seem to be passing anything through for the health state. All I get is a list of the system names but no health state. I believe this is because the Get-SCOMClass cmdlet does not have a "HealthState"
field to pass. It does have a "Status" field which I am wondering if that might work for me if I pipe in maybe the name of the system I would like to view.
I will continue on and play around with what I have so far.
Any further help would be greatly appreciated!

Internet based management of SCCM clients and management points ?

We have an SCCM backend infrastructure which is used to manage what is in affect multiple external organizations over the internet. Currently each SCCM client is managed by the primary server directly over the internet.
Am I right that we could place a configmgr management point on the internal networks and for the clients to talk to this server when connected to the company network instead of all clients getting patched across the internet connection ? Meaning that
just the MP would communicate with our backend infrastructure ?

So your internal clients are now connecting over the internet to the local MP? How does this setup look like exactly? How were the clients installed (parameters)?
Torsten Meringer | http://www.mssccmfaq.de

MBAM 2.5 integration broke my Primary Site Server - Managment Point http status code 404, not found

I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem.
Though, situation now is that my site is now out of order because of Management Point cannot connect to IIS or something like that.
In status messages I see "MP Control Manager detected management point is not responding to HTTP requests. The HTTP status code and text is 404, Not Found. Message ID 5436".
In mpcontrol.log I see Call to HttpSendRequestSync failed for port 80 with status code 404, text: Not Found
I have tried:
Bindings checked, that http uses port 80
MP component is uninstalled and reinstalled succsessfully
Primary site server has restarted several times
In IIS, Default Site -> SMS_MP->Basic Settings I did "Test Settings". With pass-through authentification it cannot Access the D:\SMS_CCM path, I changed to the domain admin, and it succseed. I have no idea, does this have something to do
with it.

I have experienced all the above problems also and they can be a pain to fix. I guess the moral of the story is (as Andy says) leave the ConfigMgr server alone. If you want an MBAM server then build an MBAM server.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Hmm, I guess ConfMgr integration will not be the problem if your MP is using http(80) and MBAM will use https(443). If you then set spn to https, it will use 443 as-is, right? But other custom ports might be the problem?

Management Point created using Powershell will error CM Console when viewing properties

Greetings,
We have an established ConfigMgr 2012 R2 CU3 environment with several Primaries and management points already active. These were all installed manually using the CM Console.
I am now trying to add additional Management Points using Powershell using the command:
Add-CMManagementPoint -enablessl -sitecode "ABC" -sitesystemservername "MPservername.domain.com" -allowdevice -clientconnectiontype internetandintranet -generatealert -verbose
The PS completes without error, the MPSetup.log and MPControl.log indicate all is well once the setup completes
The MP appears as a component under the Server when viewing in the console
The IIS logs show clients communicating fine and the CM component Status monitor is all green with no errors showing in the status message
A Get-CMManagementPoint returns fine showing all the same details as other working MP's
However if I try to view the properties of the Management Point from the console, the console will error
If I click Continue it will open the properties but they don't appear correctly. The "sitedatabase" tab is missing and the mobile device and generate alert boxes aren't selected. If I click Quit the then console crashes.
So everything appears to be working, except for being able to view the actual properties through the console.

It doesn't appear to give a specific error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.ManagementPointConnectionsControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnLoad(EventArgs e)
at System.Windows.Forms.UserControl.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.TabPageCollection.Add(TabPage value)
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.AddTabs()
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.OnLoad(EventArgs e)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
Followed by lots of entries of the loaded dll's and finished off with
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Error adding Management Point over Win2008 SP2 x86

Hi,
I am using SCCM 2012 R2.
I am trying to install an additional management point over Windows 2008 Enterprise SP2 x86. The prerequisites was installed based on the following article: http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
The error is the following:
Site Component Manager detected that the site server does not contain the binary files for the platform (processor architecture) of site system "\\SERVER2.MYDOMAIN.COM". Possible cause: When installing this site, you did not specify that the binary
files for this site system's platform should be installed on the site server.
Solution: Use Configuration Manager Setup to modify the configuration of this site. When asked to select the server platforms for this site, select this site system's platform
The following article http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSiteRoleReqs states that a MP can be installed over a Windows 2008 SP2 x86,x64 server (Standard, Enterprise or Datacenter).
The first SCCM server is local admin at Win2008 Server (server I need to be second MP).
The question is:
What is the procedure to install a MP over Windows 2008 SP2 x86 server?
Thanks in advance!

Hi,
Your MP's have the right ports open and the right pre-reqs installed?
Have you checked the log files MP*.log?
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_MPLog
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Service WDS on management point ?

Hi,
We have only one Management point and some DP.
Does service WDS must be working on the management point in order to using operating system deployment ?
Or this service must be work only on distribution point ?
Thanks,
TixTix.

WDS is only required on the Distribution Point.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Installing New management Point

Hi All,
We want to install a new Management Point in one of our site and remove the existing one.
could any one please help me what all the steps needs to follow or is there any document available for the same.
Prashanth Kumar System Center Administrator

Some good info.
http://gerryhampsoncm.blogspot.co.uk/2014/05/configmgr-2012-additional-management.html
https://social.technet.microsoft.com/Forums/en-US/8cd50831-7d1f-4876-acfe-5897dd8cbb96/remove-and-reinstall-management-point?forum=configmanagerdeployment

ConfigMgr 2007 Management Point Health: State

Similar Messages

Maybe you are looking for