ConfigMgr 2012 Distribution Point - adjust drive reserve space after installation
When installing a SCCM 2012 DP, we get the option for drive settings where you can set the drive reserve space - pretty straight forward. However I can't seem to find where to re-configure this after it is initially configured. Any ideas? I don't
really want to remove and re-add the DP role just so I can adjust that setting!
My Microsoft Core Infrastructure & Systems Management blog -
blog.danovich.com.au
Sorry, but I can't find it. I've installed a DP with a random reserve number in hopes that I'd find it in the registry, but no such luck. Hopefully, someone else has an answer.
Nicholas Jones, MCITP® | Core Infrastructure Consultant | Sparkhound | https://www.mcpvirtualbusinesscard.com/VBCServer/nicholas.jones/profile
Similar Messages
-
ConfigMgr 2012 Distribution Point Schedule - UTC or Local?
When setting the replication schedule for a distribution point in ConfigMgr 2012, is the schedule represented as UTC time or local time?
Unfortunately not, but google translate usually does a great job (I can read and unterstand the translated version ;-) )
Torsten Meringer | http://www.mssccmfaq.de -
Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points.
Please help and share configuration steps.
Thank you.This is not anything ConfigMgr is doing. The cases I've seen similar to this have had a GPO responsible for this behavior from which the site systems needed to be excluded.
Jason | http://blog.configmgrftw.com | @jasonsandys -
IIS Admin Service Disabled on all SCCM 2012 Distribution Points Automatically After few Hours
Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points after few Hours.
Please help and share configuration steps.
Thank you.
Regards,
Faisal Alvi
Regards, Faisal Alvi PPLThat's not something ConfigMgr does. Examine eventlog and see if there are GPOs or whatever is disabling it.
Torsten Meringer | http://www.mssccmfaq.de -
SCCM 2012 distribution point install failes with faild to verify disk drive
I am trying to install remote distribution point on new Windows Server 2012 standard but getting failures. here is the code:
Failed to find a valid drive on the distribution point
Failed to install DP files on the remote DP. Error code = 15
I can created files and folder manually on the server fine on the drive specified during the deployment wizard. I need to know what process SCCM 2012 goes through to verify a disk drive for usage as a remote distribution pointHi,
Did you ever get this fixed?
In my case, it's a physical server with a 2x 500GB in RAID1.
Server OS is 2012. SCCM Version is 2012 SP1 cu2
The disk has been partitioned into 2 logical drives: C-Drive and D-drive
The distmgr.log states:
failed to find a valid drive on the Distribution Point
Failed to install DP Files on the remote DP. Error Code = 15
Drive D: is not valid. Error = 15
Do you have any ideas of how SCCM evaluates drives to be correct?
I've ran a WMI Query and the partition shows as a Local Hard Disk.
Do you have any more ideas what I can check?
Thanks!
Filip -
SCCM 2012 Distribution Point without IIS
Hello. My environment is SCCM 2012 SP1. I need to set up distribution points on several Windows Server 2003 machines. These machines have certain security requirements. One of which is no IIS. In SCCM 2007, I was able to create DPs without installing IIS.
This prevented the use of BITS extensions but was acceptable. I cannot seemed to do the same with SCCM 2012.
As a test, I performed three steps to test a DP without IIS on a Windows Server 2003 machine 1) Made the primary server a local administrator on the Windows Server 2003 machine, 2) Installed RDC using the msrdcoob_x86.exe file, 3) in the admin console, I
created a new site system server with the distribution point role. I did not check allow it to install IIS to install/configure during the setup. The distribution point reports a successful installation status but I get three errors when I try to distribute
a package. The first error message is Failed to create virtual directory on the defined share or volume of the distribution point. The second error is Distribution Manager failed to connect the the distribution point. The third error is Distribution Manager
failed to process package "Package Name". I know that installing IIS with BITS extensions and WebDav support would fix this problem. However, I would like to use the DP without IIS like I did in SCCM 2007.
Looking at the supported configurations, I see the below. This leads me to below that it is possible. Does anyone know if this is possible? If so, what I am missing in my steps.
With System Center 2012 Configuration Manager, the distribution point site system role does not require Background Intelligent Transfer Service (BITS). When BITS is configured on the distribution point computer, BITS on the distribution
point computer is not used to facilitate the download of content by clients that use BITSBITS is a client side technology and has nothing to do with the server side of a DP or IIS and thus is irrelevant.
WebDAV was built into the relevant components of ConfigMgr obviating the need for the Windows Server WebDAV component so that's not needed for 2012 at all and thus N/A.
Ultimately, no, this is not possible. IIS is required on a DP in ConfigMgr 2012. This is clearly listed at http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs.
Jason | http://blog.configmgrftw.com -
QUERY TO FIND FREE DISKSPACE IN SCCM 2012 DISTRIBUTION POINT
this is the query to get free disk space on distribution point ,but this is not working for sccm 2012 ,please help
Select
Distinct
SD
.Name0,
SR
.RoleName,
LD
.DeviceID0,
LD
.FreeSpace0
* 100
/ LD.Size0
'Free Disk Space'
From
v_R_System SD
Join
v_Gs_Logical_Disk LD on SD.ResourceId
= LD.ResourceId
Join
v_SystemResourceList SR on SD.Netbios_Name0
= SR.ServerName
Where
LD.DriveType0
= 3
and
SR.RoleName
=
'SMS Distribution Point'
ankithyou're probably getting 0 rows...
v_SystemResourceList.ServerName contains the netbios+domain name, while v_Gs_Logical_Disk.Netbios_Name0 only contains the netbios name (no domain), therefore the join doesn't find any matching rows...
You need to trim the domain name from the field {LEFT(SRL.ServerName,CHARINDEX('.', SRL.ServerName)-1)}
try this query instead:
SELECT DISTINCT
SYS.Name0 As 'Device'
,SRL.RoleName As 'Role'
,LD.DeviceID0 As 'Disk',LD.FreeSpace0,LD.Size0
,LD.FreeSpace0 * 100 / LD.Size0 As 'Free Disk Space'
FROM
v_R_System As SYS
Join v_Gs_Logical_Disk As LD on SYS.ResourceId = LD.ResourceId
Join v_SystemResourceList As SRL on SYS.Netbios_Name0 = LEFT(SRL.ServerName,CHARINDEX('.', SRL.ServerName)-1)
WHERE
LD.DriveType0 = 3
And SRL.RoleName = 'SMS Distribution Point'
Additionally, if you notice that the LD.FreeSpace0 field returns NULL, you need to enable the hardware Inventory collection of this information [ client settings > hardware inventory > Logical Disk (SMS_LogicalDisk) > Free Space (MB) ]... Then initiate
the hardware Inventory cycle action and it should show results...
I don't have this field inventoried, so I cannot confirm the accuracy of the query... -
SCCM 2012 Distribution Point in workgroup
I am trying to install a SCCM 2012 SP1 DP on a Windows 2008 workgroup server.
Some parts are working but during installation I get errors....
The question is: is it supported what I am trying to do, a workgroup (not part of a domain) server using as DP in SCCM 2012 SP1 ?Distribution Points must be domain members
http://eskonr.com/2013/08/sccm-configmgr-2012-manage-workgroup-computers-for-deploymentremote-tools-etc/
You can manage workgroup clients though.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012 Distribution Point not working properly on a Windows 2012 Server
I have an SCCM SP1 site running on a Server 2008 R2 machine. I had a couple of distribution points, also running on 2008 machines. These served as DPs and PXE boot points. I had no problems with these.
I resently added a Server 2012 machine, and set it up as a DP, with a PXE boot point. The servers is part of a boundary group containing about 1500 clients. I distributed all of packages that are included in my main task sequence, and am able
to PXE boot, and image machines successfully.
However, I am having problems deploying other packages and Windows update packages from this DP. It seems like I am only able to deploy packages that have the "Copy the content in the package to a package share on distribution points" enabled.
If this is not enabled, the client will get the deployment policy, but will never download the package. The "In Progress" tab for the deployment status will just say "Waiting for content".
I have checked the rereqs for IIS on the Server 2012 DP, also checked the firewall. Everything that I see seems to be OK. Are there other things that I can check to determine why this DP isn't working right?Hello,
According to the following description, this behavior would be normal:
If you configured the option Run program from distribution point on the
Distribution Points page of the Deploy Software Wizard, do not clear the option
Copy the content in this package to a package share on distribution points, because this will make the package unavailable to run from distribution points.
http://technet.microsoft.com/en-in/library/gg682178.aspx -
Critical Errors SCCM 2012 (Distribution Point and Reporting services point)
Hello,
We are getting errors under the Site Status for the Distribution Point and Reporting services point. Was running fine and have not really made any changes but all of a sudden we have these critical errors.
The report server service is not running on Reporting Service Point server "XXXXXXXXXXX"; start the service to enable reporting.
We have stopped and restarted the SQL 2012 reporting service point with no errors. What else should we look at for this error? And are these related?
Thanks,
BobbyHi,
Have you checked the log file SRSRP.log?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM 2012 Distribution Point server in a workgroup as well as the clients
HI,
It is possible to have a distribution point set up by SCCM 2012 R2 which resides in a workgroup to manage workgroup users.
Basically, SCCM 2012 R2 is setup within a domain and a forest, The clients in the workgroup resides in a DMZ. The server in the DMZ is also within the workgroup.
For some reasons, at this time, it is not possible to add the server to the Active Directory to push it the distribution point role and therefore managing thoses clients within the workgroup.
Is there a way to set up the distribution point role to a server in a workgroup?
Thank you
Ehttps://technet.microsoft.com/en-us/library/gg682077.aspx?f=255&MSPPError=-2147217396#BKMK_SupConfigWorkgroups
Jason | http://blog.configmgrftw.com | @jasonsandys -
Server 2012 Distribution Point - Is BITS Required ?
Hi All,
I have deployed a Distribution Point on Server 2012, i went through the documentation and there was no mention of BITS being a prerequsite...
So my Question is - Do we still need to install BITS as a prereq for the Distribution Point Role on a Server 2012 box.
CheersThere still seems to be some contradictions on whether you are supposed to install BITS or not when setting up a Distribution Point.
http://technet.microsoft.com/en-us/library/gg712264.aspx under the section
"To install Internet Information Services (IIS) on Windows Server 2008 and Windows Server 2008 R2 computers"
clearly shows for Windows Server 2008 R2, select the
Background Intelligent Transfer Services (BITS) check box.
If you look at http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs under the Distribution Point prerequisites, there
is no mention of installing BITS unless we are to assume the statement "You can use the default IIS configuration" means to select BITS as described above?
Plus the following note under Additional prerequisites is as clear as mud.
Note
With System Center 2012 Configuration Manager, the distribution point site system role does not require Background Intelligent Transfer Service (BITS). When BITS is configured on the distribution point computer, BITS on the distribution point
computer is not used to facilitate the download of content by clients that use BITS.
Most of us understand the client facilitates the BITS downloads but is there still a need for the
BITS Server Extensions and the only way to get those on a Server 2008 R2 box is to select the
Background Intelligent Transfer Services (BITS) check box? -
Question about locking down IIS on an SCCM 2012 distribution point on a Windows Server 2003
Hello. My environment is SCCM 2012 SP1. I will be setting up several distribution points on Windows Server 2003 machines. This summer I have a project to configure SCCM to use our PKI infrastructure. Unfortunately, this will not be in place before I need
to set the Windows Server 2003 machines up as distribution points. I am not an IIS expert. When I set the DPs up, I am only 1)Installing IIS, 2)Enabling BITS extensions, and 3)Enabling WebDav. Is there anything I should do to ensure they are as secured as
possible?I would say that installing Windows Server 2003 is not "as secure as possible" due to it's end of support coming soon.
http://support.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=3198&x=10&y=12
And I would say that we need more information about your scenario to tell you how it is as secure "as possible". Since that would be shutoff at the bottom of the ocean. But that wouldn't be that useful server.
Im guessing that you will run these servers for internal
clients ONLY. And that you have a decent edge protection as well as physical protection. Then I would start by having the lastest secrutiy patches, running antivirus software and having the firewall turned ON. I would make sure that
only necessary logons would be possible and that the servers wouldn't cache any credentials. Typically a DP NEVER holds sensitive data so no real need to secure them more than that in a normal scenario if you ask me.
A final notice, this is a baseline
for a common scenario. You would need to scale and change that
in order to apply for your scenario.
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa -
Ports Required for SCCM 2012 Distribution point
I think below are the port need to open for distribution point instalaltion
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
my question here is for install Distribution point instalaltion , only
Site Server -- > Distribution Point one way port open is enough? or do we need to open both ways?One way is enough for a standard Distribution Point. All distribution is initiated by your Primary site server by the Package Transfer Manager.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja -
SCCM 2012 Distribution Point Issue
Dear Team,
Hi, we deploy another Distribution point on other server on same subnet/LAN. but it show errors and progress run daily but not successful.
durranifaisalHi, did have some issues before when installing remote distribution points. More about that can be found here:
http://henkhoogendoorn.blogspot.nl/2014/07/installing-remote-distribution-point.html
It mentions: I did choose "Install and configure II if required by Configuration Manager" during installation, but IIS was installed already on servers. I did install BITS on servers also, because this seems to be needed (installation can be failing
otherwise). Strange thing, because BITS is no prerequisite at all? What I did NOT however is installing RDC as a prerequisite. Therefore files couldn't be replicated after all.
The issue described above where you can only add 2 roles is not known to me. Maybe server must be restarted or prerequisites are not in place? Like to hear the answer as well..
My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn
Maybe you are looking for
-
System Not Calculating Taxes for Slab-Men.
Hi, Before Applying the note i created entry for men in T7INT1, although system created a work bench request but the entry for MEN was not reflecting in T7INT1, i am not able to locate it, now the Note is applied & the entries are present.but i want
-
Overdrive Media Console app for old ipod touch with ios 4.2.1
A friend recently gave me an "old" ipod touch. According to my itunes software, Its os is now up to date with version 4.2.1. I want to download the app for Overdrive Media Console, but current version 4.6.2 of Overdrive requires requires ios 4.3. Is
-
SSO implemention in distributed environment / BO SDK
Hi All, I am working on Single Sign On (SSO) implementation. I have Jboss Application Server which my web application resides and Business objects is resides on other Server SSO is implemented in the Business Objects Server. I can open the CMC from
-
Passing values to parameters in Documents using se61..
Hi Experts/Gurus, Can we define parameters in SE61 under type "Document class: General Text" for a document? If so can any one please tell the steps? Regards, Yugesh Edited by: Yugesh Reddy on Nov 6, 2009 8:39 AM
-
Crashing issue with dual cards not in SLI mode
Running CS6 on a HPZ820 with 64GB RAM and TWO Nividia Quadro4000s... having some crashing issues - DisplaySurface.dll error. I am NOT running cards in SLI mode. Any ideas? I have some NewBlueFX plug-ins that I disabled the GPU - that helped. But now