Configration changes

Hi
I have done configration for OBYC in that Tkey PRD in this
Valuatin class 1120 GL 40011200
after that i change the GL from 40011200 to 40011300
how i can find out chages i made in configration OBYC PRD Key
Regards

Hi,
When u r changing the G/L account corresponding to a valuation class, then the new GL account will be hit.
When u do Production Version:Mass Processing in T code C223, it will be updated in the new GL Account.
Also while doing MIGO/MIRO, u can check.
You can check the new GL account balances in the report S_ALR_87012277 - G/L Account Balances .
Thanks,
Prithwiraj.
Edited by: PRITHWIRAJ SEN SARMA on Feb 2, 2009 11:10 AM

Similar Messages

  • Oracle 8i Intelligent Agent Service problem

    Hi!
    We successfully installed Oracle 8i (8.1.7 ee) on Intel P-IV (Xeon) server running Windows 2000 Advanced server (Service Pack 2). It was working properly until now. There was no problem in implementing the tricks useful in installation. After that, database service "OracleService<DBName>" presented problem by not automatically starting on computer startup but it was tamed by "Oradim" command added to startup folder.
    All was going smoothly for about a month now but when I rebooted the server PC yesterday, the service "Oracle<HomeName>Agent" failed to start. Along with it the DataGatherer and TNSListener services also failed (Only db service OracleService<DBName> starts but very very slowly). The Windows Event Viewer descriped the problme for Agent service as ,"The Oracle<HomeName>Agent service terminated with the following error: %%3221356551 ". The Event ID is always 7023 for this error. The rest of services just don't give any error codes. It is also stated that nothing has been installed/Uninstalled on this PC in the last several days and no configration changes, in tnsnames.ora, sqlnet.ora, listener.ora, win registry has been made. The TCP/IP configration are intact and NTFS folder and file rights are properly defined.
    Starting the service using "Net Start <service_name>" also failed with the message,"System error 7 has occured, Storage control blocks will be destroyed".
    Searching online, I also performed some steps in correcting the problem like backup and delete all *.q, snmp_ro.ora, snmp_rw.ora, services.ora files. But to no help. The log files in Oracle_Home\network\logs also dont record the problem even after setting the trace level to Admin or 16. The Agent service simply refuses to start...
    Reinstalling Oracle (over existing one, not first removing it altogether. We simply cann't do this now for data loss!!!) or just the Intelligent Agent itsself using univeral installer also fails at the end when it tries to start the intellegent Agent Service Oracle<HomeName>Agent. This time the error described is "O/S error in starting service".
    Is this something to do with Xeon server coz the same Oracle 8i is installed much before than this on another P-IV server (not xeon) running the same Op system and it never presented us this problem todate. Its also worth mentioning that this problem occured before as well, on the second day we installed Oracle 8i the first time on Xeon. Since there was no data then, we simply removed oracle, cleared registry and started all over again BUT now it cann't be done.
    Any help shall be highly appreciated.
    With Regards, Rashid.
    SeaBird505 at yahoo.com

    Thanks for stopping by this thread. Problem has been resolved from another forum. Actually c:\oracle folder was accessable to administrator only, when I added 'Everyone' to the permission list as well, everything started fine. Allowing 'Everyone' to this folder is dangerous but its working for now :)

  • How to improve jdbc 4 connection and Transact-SQL

    I am using a jdbc 4 connection to connect to Database.
    With code
    Class.forName("org.postgresql.Driver");
    String url = "jdbc:msql://athens.imaginary.com:4333/db_web";
    username = �mycon�;
    password = �mycon�;
    Connection  conn = DriverManager.getConnection(url, username, password);And quering and updating with database with TSQL
    Sample code
    Statement select = con.createStatement();
    ResultSet result = select.executeQuery("SELECT key, val FROM t_test"); I am able to get the result
    But i want to improve it.
    Whether i should use any other api or any other configrational changes I need to imporove the rilibility and increase the speed.
    Any suggestions?

    Please don't cross-post. You have a thread for this in the JDBC forum (which is where it belongs, if anywhere), so keep the discussion there, please.

  • Suppress Output for Closed PO

    Hi,
    actuallly the requirement suppress out put for closed po.
    when delivery completed and final invoice indicator is  checked the output shouldnt take place.
    po out put should be suppress.
    The following fields needs to be cleared to suppress PO output:
    -  EKPO-ELIKZ Delivery Completed Indicator
    -  EKPO-EREKZ Final Invoice Indicator
    Standard program MEDRUCK can be used as a reference.
    exactly i want to know is there any configration changes
    where i can go head and do the changes, so that when the po in change mode when  delivery completed and final invocie indicator is checked.out put shouldnot  take place.
    kindly help in rectifying the issue,

    Hi,
    I would advice you to check the following:
    Please kindly review notes 46842 and 28869 for the SAP standard                     
    behaviour.                                                                               
    28869 Printout of changes although field not print-relevant                        
    46842 Change not relvt to printing generates chng mesg.                                                                               
    When a field is changed in a purchase order, a change message is                   
    generated (created automatically by ME22, please refer to note 28869).             
    However, if the change is not relevant for printing, this message                  
    can neither be displayed nor printed (Please refer to note 46842).     
    Regards,
    Edit

  • Activate Global Funds Management Functions (PSM-FM)

    IMG Path: -
    Public Sector management – Fund Management Government – Basic settings – Activate Global Funds Management Functions (PSM-FM)
    When I am activating the Fund management function (PSM-FM) in ECC 6 version, I am getting the error " Activation of Household management not permitted)
    Moreover, when I am activating Fund management in the following IMG path
    Path: - SPRO- Public sector management – Funds management government – Actual and Commitment Update/Integration – Activate/Deactivate Funds Management
    When tried to activate Funds management the system throws the message "Read Access only". Message number SV044.
    I am not able to do any configrational changes in this customization step.
    Kindly advise.
    Regards
    V.Krishnan

    Hi All
    I am also facing the same problem. Has anyone found the solution for this? I have gone through all the relevant actions for activating FM.
    The steps i took are :
    a) Create a Funds management area
    b) Assign the FM Area to company code
    c) Activate Global FM Function
    d) Activate Global FM Budgetory control check
    e) To a FM area assign the currency,Budget profile,Fund profile ,Fiscal year variant
    f) The master data to be created
    1. Fund centre
    2. Commitment item
    Funds are not relevant at my scenario so it is not relevant.
    g) Made budget entry for a FM area at Fund centre,Fund,Commitment item level.
    h) Created derivation rules for the posting.
    i) Assign Commitment item to GL accounts
    j) After checking the postings, I tried to activate FM.
    At this point the FM is giving me the same error:- Read Access Only
    Please Help
    Points will be rewarded.
    Thanks.

  • Activating FM

    when I am activating Fund management in the following IMG path
    Path: - SPRO- Public sector management – Funds management government – Actual and Commitment Update/Integration – Activate/Deactivate Funds Management
    When tried to activate Funds management the system throws the message "Read Access only". Message number SV044.
    I am not able to do any configrational changes in this customization step.
    it is to mention that i checked the company code and the log contains no errors , i also checked the transaction BF11 and IS-PS is checked but dimmed.
    Kindly advise.
    Regards
    N.Abolfettouh

    Hi,
    Please visit these links in the Public Sector Forum:
    [SAP ECC6 IDES;
    [SAP ECC6 IDES Activating Funds Managment]
    Kind regards
    Mar

  • Sale order change problem.-Variant configration

    Dear All,
    After  sale  order  configration and  material transfered  to  sale  order  stock ,  then when i  trying  to  change   mode  in  sale  order  i  am  getting  the  error  "Internal error in communication between  configuration and sales doc.GET_CONFIG_MODE"
    Please  give  the  correct  solution    above  problem
    Regards
    SVR
    Edited by: sunitha p on Apr 30, 2008 9:24 AM

    closed

  • HP laptop update failed, and now it wont stop undoing changes.

    When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?

    You can try getting to Advance Boot Menu by 
    1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
    2.Shift and F8 (When the first options doesn't help at all )
    then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost ) 
    Please update here if there is still any problems

  • Tcode CS02 changed triggers idoc but not CS21 using BD21

    Hi
    when bom is changed using CS02 then when using BD21 triggers IDOC for the message type
    but
    when bom is changed using CS21 then it does not trigger idoc using BD21
    I checked the code for BD21 message type function
    I found that change pointer (bdcp2-object id ) is different for both transaction CS02 and CS21.
    CS02 is updating object id with mast-stlal but this entry is missing for CS21
    I am not able to find how the table (BDCP , BDCP2) for change pointers is updated for bom change.
    Can you please let me know the patof code which i should check for updating  the change pointers entries in BDCP , BDCP2 for bom

    I checked the sap system is creating enteries in cdhdr change pointer usin fm STUE_V_WRITE_DOCUMENT . I checked that when used TCODE CS05 the entry is updated for stlal as
    In CS02  the entry for OBJID hold the value for stlal (Alternative BOM)
    ie 500M0001064220110914  01            20110914
    In CS21  the entry for OBJID does not hold the value for stlal (Alternative BOM)
    ie 500M0001064220110913                20110913 (entry missing for stlal)
    It clears the value of stlal . Is ther any sap note or configration setting for CS21 to get the value for alternative bom .

  • Do i need to reconfigure OEM Database Control when change ip address?

    Hi all.
    Do i need to reconfigure OEM Database Control after a change of ip address?
    I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
    This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
    Regards....!

    myluism wrote:
    Hi all.
    Do i need to reconfigure OEM Database Control after a change of ip address?
    I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
    This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
    Regards....!It depends.
    When you created the dbcontrol, the configuration was put in a directory in ORACLE_HOME named something like 'hostname_sid' and there are also files under that where the hostname is baked into either the file name or a property of a configration defined within a file. If it is truly hostname, you might be ok, but if it is actually IP address instead of host name (I have seen that) then you obviously have a problem.
    Over the years (and across several versions) I've found the OEM repository to be rather "brittle", and Oracle to have a rather cavalier attitude about rebuilding it. As a result, I specifically DO NOT have anything important - and very specifically my backup jobs - in the repository. I still schedule my backups through rman, though I know many people use dbms_scheduler. But even that appears to not be the same as an oem controlled schedule.

  • CFM: change value date in OTC interest instruments

    hello,
    in OTC transaction like: CAP, FLOOR, SWAP, FRA and etcetera.
    there is a possibility to change of the interest (for exmpale flow 1300) in transaction TO02.
    in transaction TO02 the system enable to change the 'amount" of the interest but don't let us th change the "payment date" of the interest.
    is anyone know how i can configre the system so i can change the "payment date" of the interest.
    in CML (loans management)  there is an option to change the "payment date".
    thanks
    meir

    Hi Meir,
    basically you should be able to do this via the interest button or via the condition buttons. There you can find the area payment date which is again based on the update area. In this area it is also possible to chosse between standard and special if you want to define e.g. single dates.
    I hope this will answer your question.
    Regards
    Robert

  • PO Change after Creation

    Dear all;
    In this scenario after creation of PO it is possible to change the PO, but Our client requirement is not to change PO after creation .how this is possible ,is there any special configuration for that ?
    Thanking You;
    Regards;
    Joydeep Mukherjee

    hi,
    in standard their is no that facility for normal p.o but you can restrict that at  enduser level don't give that authorization to that enduser for this you have to consult your basis person.
    other wise you have to restrict through relese startgy for p.o
    for configration of relese startgy go through this link
    http://www.****************/Tutorials/Workflow/POReleaseStrategy/page1.htm
    http://www.sap-basis-abap.com/sapmo017.htm
    Thanking you.

  • How to replicate configuration changes in Felix to publish instance

    Hi,
    I have made some changes in configuration under Felix 'Configration' tab.
    i.e., added few mapping rules in 'Apache Sling JCR Resource Resolver'.
    Now, how do I replicate these changes to a publish instance? I hope I don't need to make the same changes again in publish, one by one?
    Thanks!!

    You should create env specific config and manage it through package.
    http://www.wemblog.com/2012/10/how-to-work-with-configurations-in-cq.html
    Yogesh

  • EDI Outbound sales order change

    Hello,
        I am triggering an EDI outbond sales order change.
    I am useing ORDCHG and ORDERS05.
    While setting up the Outband Partner profile,In the Message conterol tab
    what is the Application,message function and process code.
    Thanks in advance...

    I am triggering an EDI outbond sales order change.
    I am useing ORDCHG and ORDERS05.
    While setting up the Outband Partner profile,In the Message conterol tab
    what is the Application,message function and process code.
    -The application is V1.
    -You should enter in the Messagetype the Outputtype as used in NACE and the Sales Order Output creation. That can be BA00.
    Make sure you make 2 entries in the partner profile: one where in the messagecontrol tab the change message Tab is ticked (in case the order changes) and one where it is not ticked (initial change).
    -Message functionion can be used optionally, to differentiate to make it unique.
    -The Processcode can be SD10 (or ME02 for PO change). You can use the dropdownbox if there is something configred yet.

  • Server 2012 R2 - Change network location from public to private

    I am having an issue with changing Network location to private from Public on Server 2012 R2 X64 .
    Please note all the reference for previous servers for fixing this issue  does not work on 2012 R2.
    I am using Static-IP and "Workgroup" as domain setting.
    In 2012 server by Right  clicking on Network and Turn sharing on or OFF worked but in 2012- R2 Right click is not working not providing turn sharing ON or OFF option.

    Check if you can change from here :
    Run -- Gpedit.msc-- Open Computer configration -->Windows Settings -->Security Settings -->select Network list manager policies
    Arnav Sharma |
    Facebook | Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other
    community members reading the thread.
    NO it did not work I had already tired and rebooted it does not work. Just for other having the same issue please note my Build is 9600 so this may not apply to you,if you have a different Build you might not have this problem.
    I am going back to server2012 rather using R2.

Maybe you are looking for