Configration steps for subcontracting

Dear All,
Please tell me Configration steps for subcontracting(All IMG Activities)with T-code & Path.
Regards
Pavan

HI,
pls look at this.
http://www.sap-img.com/materials/sub-contracting-cycle.htm
regards

Similar Messages

Cofiguration step for SubContracting Order Cycle (SCO)

Pls,provide me the the configuration steps of SCO(Suncontracting Order Cycle)

Sub Contracting Cycle
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity. (special procurement type should be 30 in material MRP2 view for the mateiral you are getting back from subcontractor)
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product ) 0
(material provided to Vendor is now charged to expense)
(5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Note:: At the Time of GR 543 Mvt is up dated for Raw Material.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to be created for the material(2) calling for material(1)
4. Info record and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
u2013 You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
u2013 If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
u2013 You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.

Configration steps for business area wise balance sheet and p&L accounts

dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Hello
No seperate screen available for BA set up.
Follow the IMG, enterprsie structure, define and assign set ups.
Assign to SO / Plant /
Create cost elements and assign cost centers for each business areas.
Create clearing accounts for readjustments in BS and PL, and execute BA pl and bs adjustment programs for taxes, GRIR and some accounts, where BA is not populated.
Now you would get seperate BS for each BA
Reg
assign points if useful
dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Components are not getting consumed at the time of GRN for Subcontracting P

Dear All,
I hav created a Subcontracting PO and transfered the componenets
At the time of GRN for Finished Product, consumption of componets are not happening and GRN is getting posted
Please help me

Hello,
Have you created the subcontracting Purchase order or not? check , Item category "L" was available in Purchase order not?
I mean you are not getting the 543 movement type in MIGO transaction.
Follow below steps for subcontracting
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Please check these steps are their in your PO or not?
Regards
Mahesh Naik.

Account postings in GR & IR for Subcontracting

Hi Experts,
I need to know the account postings for both GR & IR during Sub contracting.
Let us take the scenario . .
PO price - 1000(Gross) + 200(Tax) = 1200 (Net) for 1 Qty
GR - PO Net Price due to Moving Average price.
IR - 1200(Gross) + 240 (Tax) = 1440
Please explain the accounting entries during Goods Receipt and Invoice Receipt.
By
Prabhu

If Material has Price Control as "V" (MAP)
(BSX) Stock A/c of Assembly - Dr
(BSV) Change in Subcon Stock - Cr
(FRL) Subcontracting Charges - Dr
(WRX) GR/IR Clearing A/c - Cr
(BSX) Stock A/c of Components - Cr
(GBB-VBO) Consumption A/c of Components - Dr
If Material has Price Control as "S" (Std. Price)
If Material is having Price Control as "S" then Price Difference A/c will also in picture.
This depends on configuration; SPRO > MM > Inventory Management and Physical Inventory > Goods Receipt > Price Differences for Subcontract Orders at Goods Receipt
Price Differences for Subcontract Orders at Goods Receipt
In this step, you configure for each valuation area whether price differences are generated for a Subcontract order at the time of a goods receipt if the manufactured material is managed at standard price and the standard price varies from the receipt value (externally performed service + value of components + delivery costs).
Example
Finished product: $400 (value at standard price)
Subcontract order:
o Ext. service : $250
o Components : $100
Posting schema without price differences:
Stock account FERT : 400 +
Stock change : 400 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
Posting schema with price differences:
Stock account FERT : 400 +
Stock change : 350 -
Price difference : 50 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
hope it help

How to desable ok check for subcontracting child parts in MIGO

Dear SAP Experts,
my client is having one issue regarding disable OK check for subcontracting child parts in MIGO transaction ,In MIGO subcomponenets are attached to main component , my client is asking for disable that OK check box user shouldnot remove that check box tick mark when system showing message deficiate of subcomponents at subcontractor because some times users removing that check box tick mark and proceeding further, with that they are not able to reconcile the sub challans.
Plz let me know how disable OK check for child parts in MIGO

chandu
while making the po we are explode the BOM and we defined the parant and child mateirlas in bom.
system will show the same in migo . i think there is no standard configration to block the option.
Regards
laxman

Steps in Subcontracting Process

Dear Experts,
In Subcontracting process if the subcontracting period of 180 days is completed and if material is still with Vendor, how to complete the process.
Also how to reverse the Cenvat Credit.And how cmplete/reconcile the challan.
Please explain detail steps and Tcode.
Thanks and Regards,
Sapmm user

Sub Contracting Cycle
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity.
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product ) 0
(material provided to Vendor is now charged to expense)
(5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Note:: At the Time of GR 543 Mvt is up dated for Raw Material.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to be created for the material(2) calling for material(1)
4. Info record and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
u2013 You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
u2013 If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
u2013 You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.

Urgent Delivery for Subcontracting

Dear All,
I have a question regarding the delivery. We use VL10d for creating the delivery for STO Purchase orders. We enter shipping location and PO number in VL10D.
Is there anyway similar we can do for the subcontracting PO. In subcontacting PO no shipping tab is generated. Please let me know the way to do the deliveries for subcontracting PO's.
Thanks..
Suraj

Hi,
Basically in ME2O, u can create a delivery for the materials which can be on a single or multiple POs. Once the material is sent to subcontractor, the consumption against particular PO can be identified having different batches for the same.
This delivery doesnot have actual hardcoded reference to PO unlike outbound delivery for STO or SO.
Steps:
ME2O - In initial selection screen, enter PO vendor & execute. Then in subsequent materialwise, you will list of POs under the node "Requirements via SC Orders". Select material & click on Create Delivery button. You can create seperate delivery for the each individual PO qty or single delivery for cumulative PO qty. Go on entering the data requested & continue.
Thanks & Best Regards,
Devendra Gaware
PS - Reward if found useful.

Configration require for Import Purchase

Guru
I need the configration steps required for Import Purchase indetail step wise
Thanks
Sudhir Bilwar

Dear Sudhir,
Please go through the configuration guide of block J83(Imports procurement) through the link below.
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
All the steps are given in chronological sequence.
Trust this helps.
Regards
Venkat

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Delivery for subcontracting

Hi,
Could anyone tell me when the delivery has to be done for subcontracting and when the goods movement 541 should be used. The transaction ME20 doesnt exist when i tried to create delivery for the subcontracting PO.
Thanks in advance
Aparna

hi
the code is ME2O and not ME20
Process Flow
This scenario consists of the following steps on goods delivery:
Purchase order creation based on a scheduled purchase requisition created by last MRP run
Optional: manual purchase order creation
Purchase order approval (if required)
Components of the Material sent to the subcontractor through a Transfer Posting
Creation of Subcontracting Challan
This scenario consists of the following steps on goods receipt:
Goods receipt for purchase order delivered by subcontractor
Component reservations and consumption of component quantities as provision of material
Reconciliation of Challan
Completion of Challan
Invoice receipt by line item
Invoice verification and validation of tax expenses
Outgoing payment
Key Points
BoM explosion triggers follow-on functions such as delivery to subcontractor
Automatic posting of value flow
Automatic posting of stocks into corresponding stock types
Subcontracting info record shows added value
regards
kunal
Edited by: kunal ingale on Aug 14, 2008 7:53 AM

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Step by step for 2.6

So I think im finally ready to make the plundge to the 2.6 kernel.
So I need some help. Ive only compiled a kernel a few times, and I never changed many settings.
So could someone give a step by step for it (being sure to list any arch-specific quirks)? I would greatly appreciate it.
Also, I hear theres a patch that lets you run the Official Nvidia drivers with the 2.6 kerne, has anyone gone through this? I really have no idea how to go about doing this,as i've only ever installed the .run file.
Any help would be appreciated.
Also, its possible to switch between the 2.4 and 2.6 kernel, right? (obviously with a reboot).
Lastly, Is a new release of the 2.6 due out anytime soon? I dont want to download and compile this just to find a new version comes out.

You have to use module-init-tools which supercedes modutils. I made a PKGBUILD for it for my local system simply so I could uninstall it easier if I wanted. However, you still need the old modutils as well.
Here is my hack to get module-init-tools working:
1. Use the PKGBUILD below to compile and install module-init-tools.
2. For each of modprobe, lsmod, rmmod, depmod, and modinfo from modutils, rename those to modprobe.old, lsmod.old, etc. To find where these binaries are, use "pacman -Ql modutils".
3. Create symbolic links from the binaries that modutils used to provide to the new binaries that module-init-tools provides. Again, use "pacman -Ql module-init-tools" to figure out where the new ones are.
Example - modutils provides /sbin/lsmod. Rename that to /sbin/lsmod.old. module-init-tools provides /usr/bin/lsmod. Create a symbolic link as follows:
[root@limbo root]# ln -s /usr/bin/lsmod /sbin/lsmod
If you aren't 100% sure what i am trying to say here, don't try any of it, or you will bork your system. Also, this is more of a hack, and that's why I didn't upload the package to incoming. I only made the PKGBUILD to keep track of where everything was going.
Anyway... hope this helps you on your way to:
[john@limbo john]$ uname -r
2.6.0-test5
[john@limbo john]$
PKGBUILD
pkgname=module-init-tools
pkgver=0.9.13
pkgdesc=""
url="http://www.kernel.org/pub/linux/kernel/people/rusty/modules/"
depends=()
conflicts=()
backup=()
install=
source=(http://www.kernel.org/pub/linux/kernel/people/rusty/modules/$pkgname-$pkgver.tar.gz)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
make prefix=$startdir/pkg/usr install

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

Configration steps for subcontracting

Similar Messages

Maybe you are looking for