ConfigTool Settings for 1GB RAM System wanted

Hi,
I have done a standalone J2E SR1 installation. The Central insance doesnot come up after restarting the server. The jcontrol.exe shows "Some processes running" with an yellow flag next to it. I know that the config tool settings have to be changed. Can somebody provide me with these setings for a 1GB RAM system.
It will be much appreciated if there are any docs/ notes on how to set the values in Config Tool.
Cheers,
Siva Maranani.

Hi Siva,
Please go through this link
/people/thomas.jung3/blog/2005/05/31/microsoft-cluster-server-and-netweaver-04
Also make sure loopback adapter is created or network is up.
Cheers,
Vivek

Similar Messages

Error in PB60 "Settings for word processing system are wrong"

Hello Everybody
I am working on recruitment,
i have create applicant activity in SPRO, but when i was going to create applicant activity PB60 maintain and entering the personal number the error display " "Settings for word processing system are wrong"
then i check feature set word processing system.
plz anybody guide me how to resolved this problem
thanks
urvashi

Hi Urvashi,
Please check the following in your system:
- Go to PE03
- feature 'WPROC'
- select 'Attributes'
- press 'Display'
- press 'Struct.'
- there you will find the Basic information 'Passing type'
This must be set to '2' (Table Transfer). If this is set
to '1' i.e. please change this entry.
Hope this help
Sarah

Recruitment: ERROR -- Settings for Word Processing System are wrong

Hi All,
SAP System: 4.7.
In both cases wheteher I configure feature WPROC to return value as :
1) RTF - so that MS Word woulds be used for applicant letters, OR
2) ' ' - so that SAP Script Editor is used for applicant letter.
get the same error while I try to run transaction PB60
<b>ERROR: Settings for word processing system are wrong.</b>
But the very same settings are working in IDES.
Can you tell me where have I possibly gone wrong or what am I overlooking ?
Regards,
Amit

Hi Urvashi,
Please check the following in your system:
- Go to PE03
- feature 'WPROC'
- select 'Attributes'
- press 'Display'
- press 'Struct.'
- there you will find the Basic information 'Passing type'
This must be set to '2' (Table Transfer). If this is set
to '1' i.e. please change this entry.
Hope this help
Sarah

890FXA-GD70 bios settings for my Ram

good day to all, just bought this board and I'm wondering where should i set the base timings for my RAM? where should i put this timings manually 8-8-8-24? i know i have to enter the dram configuration in the bios now i dont know where to continue, sorry just a newbie here , tnx.

How about providing information for your system. It's impossible to say what any RAM settings should be not having a clue what RAM you have. See my signature below for the type of information to provide.
>> Posting Guide <<

Swap space/dump devices for large RAM systems

We are in the process of changing our standards for our server builds and need some input. Currently, we match the swap space on local disk with the size of RAM. I know this isn't necessary for "swap" any more, but we use the swap area as the dump device as well, so we are sure to have enough space there to contain a full memory dump if the server crashes.
Now we have systems coming in with 128 or even 192 GB of ram. They contain only two disks (146GB), which we mirror. Obviously there isn't enough space on these disks for 192GB of swap or a dedicated dump deivce.
We need the ability to capture full dumps when we have a crash, probably with a dedicated dump device. Should we start ordering SCSI disk enclosuers for this purpose? Can we make a SAN volume our dump device?
What is everyone else doing with these larger RAM systems?

Compressed dumps have been supported in UNIX flavors for many years, so you need to dig further into it. It is supported in linux, so I can't imagine why it wouldn't in Solaris. Tru64UNIX, HP-UX, AIX, and others all provide this capability.
True, you can't get internal disks bigger than the 146 on Sparc platforms, but you could attach a "boot array", like a storagetek D240 system, or iScsi or fiber attached storage. The only caveat is whether Solaris, in the throes of a crash, still has the drivers loaded that can address an external disk subsystem. That would have to be investigated with SUN. And these arrays support the new 1TB SATA disk drives. We are deploying 6140 shelves with 16TB per shelf. Simply amazing...

IMac and MacBook Pro: different price for 1GB RAM expansion?

Hey all,
just noticed that a single-stick RAM for iMac costs $100 and for MBP it's $200 although these seem to be the same DDR2 667 chips. Any guesses, may this be a mistake in the Apple Store software? I am about to order the iMac with 1 GB on a single stick so I have one slot free for a future upgrade, but I am not sure if it's really same $100 as for two 512 MB sticks.
Thanks!

Hey all,
just noticed that a single-stick RAM for iMac costs
$100 and for MBP it's $200 although these seem to be
the same DDR2 667 chips. Any guesses, may this be a
mistake in the Apple Store software? I am about to
order the iMac with 1 GB on a single stick so I have
one slot free for a future upgrade, but I am not sure
if it's really same $100 as for two 512 MB sticks.
Thanks!
Pro of one 1GB stick --> easy upgrade in the future by just adding one more 1GB stick
Drawback: using only one 1GB stick does not enable dual-channel memory support (no performance boost)
Pro of two 512MB sticks --> utilize dual-channel memory support that the Core Duo provides if you have identical RAM sticks installed (slight performance boost)
Drawback: upgrading memory in the future will require removal of existing 512MB stick(s) for 1GB stick(s)

KT3V bios settings for Kingston333DDR Ram

Hi all,
I have bought a new RAM Kingston 333 DDR CL2.5 but i do not know the best performance settings from Bios. So can anyone tell me the settings for MSI KT3V bios to increase my performance. I am using a Athlon XP2000+ Cpu.
Thanks all.

Nobody knows? ?(

HTML5 MP4 Codec Settings for Safari 5.1.5

Hello all,
I am having a problem with HTML4 MP4 h.264 videos in Safari 5.1.5 only running under Lion. Does anyone have any exactly specifications for compressing videos that will play in this version of Safari? Also, if you have sucessfully exported videos for 5.1.5 what software are you using to encode? I have tried several options (After Effects, QT7 etc) and not had any luck. Thank you!

Getting mp3 music out of your 4 satelite speakers and center channel requires either enabling the X-Fi CMSS 3D Sorround setting in your Audio Console or, alternately, if using your X-Fi card with an external Decoder, you could (if available on your decoder) enable Dolby PLII Music enhancement or X2 Stereo enhancement. I personally prefer the results from enabling CMSS 3D Surround and then adjusting my center channel for an even sound stage. Crystalizer Mode: In general, 24-bit Crystalizer produces crisper high frequencies, punchier mid-range percussion and note onsets, and stronger kick bass hits. I'm not sure that I would use the Crystalizer Mode as a substitute for good EQ settings but perhaps in conjuction would be the best approach. Depending on the 5. speaker system you have, Base Redirect shouldn't have to be used unless your satelite speakers and center channel are playing Bass frequencies that really should be assigned to the Sub-woofer. Some speaker sets and amplifiers have bass redirection feature i.e. you do not need discrete 5. signal to hear the sound on the subwoofer. Such sets always output bass - even if you connect a normal stereo source. Again, however, it is possible that if you have an analogue speaker set that does not support automatic Bass Redirection via the amplifier, then you would have to enable Bass Redirect at the sound card level in order to redirect the lowest frequencies to the subwoofer. I do not have to conduct a Bass Redirection, however, not all systems are equal in terms of functionality. The best settings for a 5. system are really contigent on the room size, speaker type and placement, room wall materials, amplifier type, content played (movies, music, spoken word., etc.) and, listeners personal preference. Personaly I would run the supplied Speaker Calibration utility and when you have the sound you personally enjoy, stick with it. Best advise I can offer to be perfectly honest. Hope this helped.

Parameter settings for windows - Note

Hi,
Can anyone help me to know the SAP note number for default Parameter settings for windows .
I want to verify all the parameter values.I tried to find out the number, but no luck
We have severe performance issue in our D01 and Q01
Thanks is advance.
Regards,
Prakash

Hi,
Most of the performance parameters are OS independent. You need to check ST02 and check most of the SWAP comings in which area and there you can click on detail analysis menu which will give you parameters for the buffer settings. You need to adjust these parameters in instance profile in RZ10.
Also, if your database is oracle10g then make sure that SAP note 830576 should be implemented.
Thanks
Sunny

Settings for OCZ3OB1600LV6GK on MSI Eclipse SLI (X58) and i7 @ 920??

Hello everybody!
Could anyone suggest me the right settings for the RAM (at 1600MHz), in order to pass memtest (in windows) wih no errors?
I've managed to setup the RAM at 1333 MHz without errors at all and my sytem stable. All the Dimms have been examined one by one and found healthy (via memtest in & out of windows). Thank you in advance!
Here are my computer specs:
MSI Eclipse SLI (MS-7520)
Intel(R) Core(TM) i7 920 @ 2.67 GHz + Noctua NH-U12P SE1366 CPU Cooler
XFX NVIDIA GeForce GTX 285 (1024 Mbytes - GDDR3)
OCZ DDR3 PC3-12800 /1600MHz /Value Series /Obsidian XTC Heatspreader /Core i7 Ready /2GB Module /6GB Triple Channel
WD2500AAKS
Corsair HX620W Modular Power Supply

Henry thank u for answering!
First image settings (in bios): 9-9-9-24 (1T), Memory Ratio 1333Mhz - Uncore Ratio 2666Mhz, DRAM Voltage -Auto (1.50V), Spead Spectrum Disasbled. PASSES MEMTEST
Second image settings (in Bios): 9-9-9-24 (1T), Memory Ratio 1600Mhz - Uncore Ratio 3200Mhz, DRAM Voltage 1.65V, Spead Spectrum Disasbled. FAILS MEMTEST
I have tried a lot of different timings to stabilize at 1600Mhz but no luck I tried also to icrease the QPI Voltage at 1.35V (as i was suggested by a friend) but i can't read anywhere the default voltage in order to increase it
The CPU-Z SPD tab 1st and 2nd image shows some sets of timings which are the same. They differ a lot than the manufacturer's settings (9-9-9-24 1.65v). Which of these should i use? Could you help me a little by being more specific?
p.s: Hope you can see the images as they are my first (pic) uploads!
(Click images to enlarge)
I made your images clickable.
-- Mark

Suggested K8T Neo BIOS settings for CL 3 Kingston Value RAM

G'evening!
I'll be putting together a system with the Athlon 64 3000 and K8T Neo board and had a question about optimal BIOS settings for paired Kingston non-ECC DDR 3200 RAM (2x512mb) that's CAS 3. Should have gotten some CAS 2.5 probably but this is what I have for now so in it goes. I'm reading the quick users guide and noticed that you can manipulate the CAS, TCRD, TRAS, and TRP.
First question: Will the board's auto detect do a good job in picking out a stable configuration?
2nd question: If you had to or wanted to make manual settings, what would you suggest? The CAS value is rather easy since I guess it should be set to 3 but what settings would one pick for the others?
And if I still have your attention...
The other things that will be going in the system are the infamous Maxtor 120 gig SATA HD, a XFX 5900FX video card, Lite-On combo burner. Powersupply is an Antec Solution Series 400W PS. After reading the forums for a bit I get the impression that you shouldn't forget to load the SATA Promise drivers so the HD will get recognized. My SATA drive will be the only drive in the system and will of course be the boot drive. Any other possible pitfalls or problems I should know about with the Maxtor SATA's and the K8T Neo board?
Also, I had thought I read from a review that the Zalman Al-Cu CPU heatsink/fan will fit on this board. Of course after seeing it in my hands for the first time I thought that it was a pretty damn big heatsink. Anyone else using this heatsink? (haven't taken it out of the packaging yet so that's why I wanted some impressions).
Thanks for any advice you can give me. It's been a bit of time since I built a computer and I'm sure there's alot of basic things I'm relearning along with the fact that the Athlon 64 is fairly new technology. On the other hand, when it's running smoothly...

Cant offer anything on the Timing, (sorry as I am Intel Fodder ), But I can assure you that the Zalman 7000-AlCu, Will Indeed Fit onto your Motherboard (With Room To Spare!) :biggthumbsup:I can attest to this because My buddy just installed the Zalman 7000-AlCu on his K8T ....And He loves it! As do I ....It's about the only thing that we have in common as far as PC'S Go .........Sean REILLY875

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

Welcome to Apple Support Communities
If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019

How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius.

How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius. Still nothing has worked. I'm still stuck with Genius offering the same apps to me. Mind you, once I click on the App Store there is nothing I can do but swipe left and right. There's absolutely nothing at the bottom of the screen like a features tab, nothing. There is, however, a categories button at the top, but that's it. Irrelevant.

FWIW, I just got off the phone with Apple technical support about this. I use Genuis for creating playlists, so I don't want to disable it, but Apple support confirmed that there is no way to avoid syncing Genius data without disabling Genius altogether. I'd read somewhere else that subscribing to iTunes Match might allow you to avoid this, but that is NOT the case, as I've confirmed, and Apple support has confirmed. For me, it routinely syncs thousands genius of items, so I have to allow a lot of time for my manual syncs.

I want to set Firefox to never remember history. When I do this using the tools tab and click okay, it goes right back to "Use Custom Settings for History". I don't want that.

I know how to manage privacy using the tools tab at the top of the address bar, or so I thought. I want to choose "Never Remember History". When I do that, and click "OK", the next time I check the privacy settings, the history is right back to "Use custom settings for history". I don't want this. Also, I don't want to use autocomplete for forms, but I can't get those settings to stay, either. I basically don't want info. stored on this computer. My system was hacked several months ago, by some joker who named all my system folders a racist slur (I reported it to Norton, and a technician had a look at it). Anyway, I want to keep things as safe as possible. Please allow me to delete all my history when I close Firefox. I don't really like Google, either, because they have a reputation for not respecting people's privacy. I don't like that I didn't have an option to uncheck google's toolbar when I installed Firefox.
Thank you.

That is probably OK.<br />
You may have changed one of the other history or cookie settings.
If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were made.

How can I change the settings for being timed out (I don't want to be timed out ever)

How can I change the settings for being timed out (I don't want to be timed out ever)?

I am sorry but this isn't something that you can set. The system has timeouts built into the code.
Andrew

ConfigTool Settings for 1GB RAM System wanted

Similar Messages

Maybe you are looking for