Configurable product pricing issue

hi all,
i am facing an issue with configurable product.
There are two configurable products in my shopping basket.
while i am  adding  the second config product , the price of the first config product is becoming zero.
Help me with your suggestion and solution.
Thanks and Regards
shanto aloor
+91 9620201169

Hello,
Can you let me know what release you are currently on, Maybe have a look at note  [1320824 |https://service.sap.com/sap/support/notes/1320824]
Regards
Mark
Edited by: Mark Foley on Sep 7, 2009 5:53 PM

Similar Messages

  • Variant Configuration - Pricing issue

    Hi,
    Can anybody please help me out with the pricing issue which I am facing?
    How can I increase the price by a certain percentage based on the value of  another pricing condition VA00 and show it as a different pricing condition?
    For example: VA00 for my product price shows 1000. Now on 1000, I want to calculate 30%  and show it with a different pricing condition description such as "Surcharge". I cannot used a fixed price for lets say "Surcharge" because 1000 as product price is not fixed/static and will depend upon variant configuration and the "Surcharge" will also vary with it.
    How can I please implement such a solution?
    With best regards,
    Sunil

    Use the VA01 condition type for this. This is the standard condition type provided by SAP to address this issue. In your pricing procedure against VA01 give the From To as VA00.
    Hope this helps.
    Regards,
    GSL.

  • How to avoid  configuration product downloading from R/3 into CRM

    Hello,
    We have CRM 4.0 connected with R/3 backEnd and configurable products are downloading from R/3 into CRM with the whole characteristics.
    We don´t use this characteristics in CRM to configure this product and the pricing. Is there any way to avoid this information into CRM??
    1.- Though the Middleware???
    2.- Though the Uninstalling IPC(internet pricing configurator)???
    3.- though the item category of the Business Transaction.???
    It´d be grateful to get a way because actually, when we enter the product, this one has to be configurated because of the errors.
    Thanks a lot,
    Luis Angel Fernández

    Hello Luis,
    First of all I am unable to understand how are you getting the characteristic through material download.
    All configuration comes through Knowledge Base and its runtime version.
    If you want to block configurable materials from flowing to CRM then set the filter on Item Category Group.
    I think you must have different item Category group for configurable material.
    Thanks & Regards
    Subhabrata

  • Runtime exception for configurable products

    Hi Gurus,
    I am getting a runtime exception for configurable products on clicking the link You can select more product options in CRM 7 b2c application . But when i login with a registered user and click the same link , it opens up and takes to the page for configuration of products .
    Please find the error from logs :
    [EXCEPTION]
    79823   java.lang.NullPointerException: It was tried to rebuild the connection because of invalidity. It is not allowed because the connection type is not JCoConnectionStateless. You may also check the user authorizations.
    79824   at com.sap.isa.core.eai.sp.jco.BackendBusinessObjectBaseSAP.getDefaultJCoConnection(BackendBusinessObjectBaseSAP.java:55)
    79825   at com.sap.isa.maintenanceobject.backend.crm.DynamicUICRM.readData(DynamicUICRM.java:121)
    79826   at com.sap.isa.maintenanceobject.businessobject.DynamicUI.read(DynamicUI.java:767)
    79827   at com.sap.isa.ipc.ui.jsp.action.InitDynamicUIAction.ecomPerform(InitDynamicUIAction.java:67)
    79828   at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:375)
    79829   at com.sap.isa.core.BaseAction.execute(BaseAction.java:212)
    79830   at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    79831   at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:692)
    79832   at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    79833   at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:409)
    79834   at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    79835   at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    79836   at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    79837   at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    79838   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    79839   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    79840   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    79841   at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    79842   at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    Can anybody help me out to find the issue .
    Thanks and Regards,
    Tony Isaac

    Tony,
    It looks more like an issue with the loading of the JCO properties before the logon. Can you go to XCM and try reentering the password and save the config. Once done do a test connection and restart the application.
    Then set a breakpoint in the BackendBusinessObjectBaseSAP class in the method getDefaultJCoConnection().
    Here when the current connection is invalid it tries to read the config properties from XCM. Just check if it is reading the correct values from the config ISA_COMPLETE which is read on the backend object.
    In case of mismatch, you need to fix that or you could try to build a new JCO connection with your own parameters.
    Pradeep
    Edited by: Pradeep Kumar on Mar 11, 2010 6:20 AM

  • Planning in APO with configurable products

    Dear Gurus
    we would like to use APO DP in order to plan the demand of configurable products managing the demand figures only for a combination of the two main products characteristics (model/version) without having in DP all the complexity of the order configuration.
    Moreover we would like to allocate this forecast to the plants and make a rough capacity planning. The levelled forecast (MPS) should then be used to explode the dependent demand of the critical components at SKU level.
    In order to manage this process I was thinking to introduce u201Cdummy codesu201D that represent the charatteristics combination and u201Cdummy BOMu201D for the explosionu2026. This in order to be albe to use SNP to perform the capacity planning and BOM explosion.
    Other scenario could be to make the capacity planning and BOM explosion only in DP (with planning BOM) but Iu2019m not sure of the feasibilityu2026
    Could you advise on which could be a possible approach and if you had such similar issue to face?  Thanks in advance
    Regards
    Ayan Bishnu

    Hi,
    Here you may think of using planning product concept. Inshort you may plan on the basis of one of your critical subassembly
    and this subassembly wud be consumed for most of the order demands.
    Please check if it is suitable for you and revert
    Thanks,
    Mangesh A. Kulkarni

  • How to Display the configurable product in E-Commerce application

    Hi Gurus
    Need the Help
    How to dispay the configurable products in E-commerce application.How can u differenciate the Normal products and Variant configured products,If any one having any idea please respond fast.
    Currently we are using 2007 version of CRM.
    Regards
    Satish

    Hi
    We need to create a configurable material in R/3 the same has to replicated to CRM using middleware.
    In short we require to do the following.
    The SAP tasks for setting up a new KMAT are outlined:
    Routings
    Smart Table
    MVC changes
    MVX changes
    ISA
    Create KMAT
    Create Class
    Create Characteristics
    Create Configuration Profile & add procedures
    Create Super BOM
    Create Pricing rules
    Regards,
    Sumit

  • Configurable Products and Campaign Management

    Hi All,
    In our project we are going for configurable products. We plan to give campaign based discounts on these products in CRM.
    Please let me know how to handle configurable products in Campaign Management.
    Many thanks for your response:
    Keshav

    Hi Keshav,
    I am currently working on setting up discounts related to a campaign. Would you have any information on how to do this? I know I need to select condition types from the discount tab. I guess I will have to create the conditon types in IMG. There are some condition types already exisitng that are being used by the pricing procedure for sales orders. Can i use the same condition types??
    Any input would be highly welcome.
    Thanks,
    Deepak

  • CRM RMA orders for configurable products

    Hi Experts,
    We have configurable products created in ERP. We need the capability to place the configurable products in CRM RMA order. Any guidence on the steps that are needed to bring the configurable products to CRM is greatly appreciated.
    Also Is it possible to place a return order for Configurable product as a whole and individually on a single variant of the product? Serial numbers are associated at both the levels.
    Thank you
    Ram

    Tony,
    It looks more like an issue with the loading of the JCO properties before the logon. Can you go to XCM and try reentering the password and save the config. Once done do a test connection and restart the application.
    Then set a breakpoint in the BackendBusinessObjectBaseSAP class in the method getDefaultJCoConnection().
    Here when the current connection is invalid it tries to read the config properties from XCM. Just check if it is reading the correct values from the config ISA_COMPLETE which is read on the backend object.
    In case of mismatch, you need to fix that or you could try to build a new JCO connection with your own parameters.
    Pradeep
    Edited by: Pradeep Kumar on Mar 11, 2010 6:20 AM

  • Configurable Product - is this possible?

    I have the following requirement. SAP says that it is possible to do this the standard way...I don't know how.
    I have a configurable product with 3 caracteristics. This product is assigned to a bill-of-material that allows me to explode the configurable product with 3 subitems depending on the caracteristics I choose.
    This I can do.
    Now here is the catch....I need to assign an item category to each of the caracteristics, so that when each of the characteristic/product is exploded in a sales order the correct item category is assigned (I need this because of cost allocation).
    Is this possible (without implementing user-exits)?
    PS: I choose the item category to control cost allocation, but any field in the pricing structure (KONP) will do just fine.

    Hi
    I have a done a editable pdf in pro.
    My client needs to put different percentages into the form (different for everyone)
    so 1 pupil might have 25% but next 60% which she wants to change herself and then send to the student.
    I have set it up so she can save it but when she sends it to the pupil, she can fill in the form BUT she can also change the percentage which we do not want.
    My client is using normal acrobat (free one) 6.5 and pupils will probably have just the free reader.
    Thanks

  • Post production support Issues

    Gurus,
    Can anyone provide me with PA/OM production support issues with the solutions..will be obliged
    Regards
    Eliz

    Hi Eliz,
    For the post production issues like,
    1. create new employee sub groups,
    2. create new payroll area
    3. create new wage type( transport allowance) in infotype15
    4. delimit the wagetypes which may allowances will not pay future.
    5. payslip error
    6. employee getting double pay
    7. configure of new nationality
    8. configure of addtional dependents
    9. create new infotypes for schools, dependent visa's etc.
    Hope you cleared
    Vijay

  • Planning "Configure Product Option" using configuration utility

    Hi All,
    I have installed HSS on server1 and Planning, Oracle DB in server 2.
    Done the HSS configuration and i can able to log into HSS successfully. When i tried to configure my planning,
    1. Open the EMP system configurator from planning server
    2. Select Hyperion Foundation ( Configure DB, Common database). Here by default "Previousely configure the DB" was secected and configuration was success.
    3. Next select planning "Configure Product Option" was not success.
    Register with shared service was failed.
    getting following error messages.
    (Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Authentication failed:
    com.hyperion.interop.lib.OperationFailedException: Unable to Authenticate.Unable to Authenticate.
         at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
         at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.Exception: Unable to Authenticate.Unable to Authenticate.
         at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Jul 24, 2011, 00:32:12 PM), com.hyperion.audit.client.exception.AuditLoggingHandler, ERROR, XML-RPC failed
    org.apache.xmlrpc.XmlRpcException: org.apache.xmlrpc.XmlRpcException: null values not supported by XML-RPC
         at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeException(XmlRpcClientResponseProcessor.java:104)
         at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeResponse(XmlRpcClientResponseProcessor.java:71)
         at org.apache.xmlrpc.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:73)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:194)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:185)
         at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:178)
         at com.hyperion.audit.client.AuditXmlRpcClient.pingServerForStartUp(Unknown Source)
         at com.hyperion.audit.client.runtime.PingForServerStartUp.run(Unknown Source)
    Please help me to solve this issue.
    Thanks in Advance,
    GTS.

    Hi
    Assuming this is 11.1.2.1 env.For Planning were you able to
    Deploy to app server
    Configure database

  • "Alternate" Sales Order Costing for configurable product

    We are using condition EK02 to record the statistical value of the product cost associated with a make-to-order (configurable) product. Our current accounting system is moving average, so this EK02 value is based on the current moving average of all the components.
    Management has a need to store a second statistical value which would be based on standard cost rather than moving average. This value would be used to assess margins on a fixed rather than moving basis. It would not update accounting in any way.
    I understand that the method used to perform order costing is configured in SD > Basic functions > Accounting & costing > Maintain requirements class for costing and account assignment. But again, I do not want to change the current method, I want to add a second.
    Can anyone suggest a method for doing this?
    Thank you,
    Michele

    Hi
    For getting margin from standard price in material master ,i think u can use VPRS in pricing conditions.
    Use the VPRS and its negative copy  for getting  actaul margin from sales in pricing procedure.
    Regards
    Mandar

  • Configurable products from ECC to CRM 2007

    Hi ,
    I understood from other posts that PME is now replaced by Product assignment block in the new Web GUI.
    My question, is this applies to configurable products downloaded from ECC?, Any special settings needed?
    I have a B2B scenario in Interaction center where in a sales order, diffrent variants of a product should be able to selected!
    How does the pricing handled in this case? Can we still use ECC to maintain the pricing conditions?
    Any info much appreciated.
    Thanks in advance.

    Hi Praveen,
    If you model your confid products in ECC, create variants in ECC, and download it to CRM, you really don't need PME.
    For Product Variants you can specify the Basic Data 2 tab to specify the Config Material name and configure the variant. Download these to CRM along with your KB.
    In CRM Sales Order, when you go to the configuration screen and configure the product, you have a tab on right hand side called as Product Variants. You can choose the appropiate variant from that column and replace the original config product with this one.
    Regarding Pricing, you can have the Pricing Conditions maintaines in ECC and downloaded to CRM. In case you are using variant pricing you can even download variant conditions to CRM.
    Regards,
    Kunal

  • Promotions at configuration option for a configurable product

    Is it possible to apply promotions to a specific configuration options in a Configurable Material?
    For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
    Base Price of Material A:   $1000.00
    Confuguration option X     :       $200.00
    Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
    Net Price of Material A with Config option X should then be:
    $1000 + ($200 - $20) = $1000 + $180 = $1180
    If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
    Thanks in advance
    SCB
    Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

    Hi,
    Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
    If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
    Please let me know  you answer, so that I will try to help you to solve the download issue
    <b>
    Do not forget to reward if it helps,</b>
    Regards,
    Paul Kondaveeti

  • Config missing, ERROR in CRM for a configurable product.....

    Hi friends,
    I have a configurable product in CRM, when i try to create a quotation in CRM with that, im getting error as "Configuration missing".
    I am not sure why this is coming. I checked the same product in ECC, and when i try to create a quote in Ecc with the same product, im getting no errors.
    And more over, in the items, im getting items, like 100, 101, 102, 103.
    I want to solve this error in CRM, and create a qoute successfully.
    Could anyone give me some guidelines or steps to solve this issue.
    I am just an ABAPER, and i dont have any fucntional person at place.
    I really appreciate your help on this regard.
    Thanks in Advance,
    Niraja.

    siddharth,
    thanks for ur help.
    Now in the Qutation item configuration tab, i can see the configuration UI with all the drop downs in that. But it has got a message on top " The configuration contains conflict".
    when i click details, the following msg is there.
    Handle Conflict   
    Conflicting Options To top
    CONFIGURATION NOT ALLOWED
    Due to configuration conditions an option is excluded Hide Explanation
    FOR THIS DEALER CODE (automatically assigned)
    Solve conflict To top
    Retract one of the conflicting options:
    Retract selected option "
    I couldnt understand what is missing.
    what i did is, in the ipc xcm settings, i created a scenario, and  a jco. its working fine. I updated PROP and URL tables with those scenarios and url.
    is there any else i have to do?
    Also i have created user exits for almost all formulas. Few are giving errors in the conditions tab? is this because of this?
    Could anyone help me on how to proceed.I am checking all the settings once again.
    I really appreciate your all help.
    Thanks in advance.
    Niraja.
    Edited by: Niraja on Aug 4, 2008 7:33 AM

Maybe you are looking for