Configurable products from ECC to CRM 2007

Hi ,
I understood from other posts that PME is now replaced by Product assignment block in the new Web GUI.
My question, is this applies to configurable products downloaded from ECC?, Any special settings needed?
I have a B2B scenario in Interaction center where in a sales order, diffrent variants of a product should be able to selected!
How does the pricing handled in this case? Can we still use ECC to maintain the pricing conditions?
Any info much appreciated.
Thanks in advance.

Hi Praveen,
If you model your confid products in ECC, create variants in ECC, and download it to CRM, you really don't need PME.
For Product Variants you can specify the Basic Data 2 tab to specify the Config Material name and configure the variant. Download these to CRM along with your KB.
In CRM Sales Order, when you go to the configuration screen and configure the product, you have a tab on right hand side called as Product Variants. You can choose the appropiate variant from that column and replace the original config product with this one.
Regarding Pricing, you can have the Pricing Conditions maintaines in ECC and downloaded to CRM. In case you are using variant pricing you can even download variant conditions to CRM.
Regards,
Kunal

Similar Messages

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

Error in Initial Load of Products from ECC to CRM

Hi ,
Im getting below errors In initial load of MATERIAL from ECC to CRM.
Data cannot be maintained for set type COMM_PR_MAT
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT
My Analysis is
I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
Required Solution
Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
Regards,
Prasad
Message was edited by:
SAP CRM

Hi there,
Try to attach the Set Types:
"COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
to the Category "MAT_" and then run the Initial load again.
It should work now unless you have some other issues.
Best regards,
Pankaj S.

Sales area missing after Product download --ECC to CRM

Dear SDN team,
Im facing a issue after downloading few products from ECC to CRM using Middleware .
The Products have been download successfully , but the Sales area for Product is missing in CRM system .
I have correctly mapped the ECC sales area to CRM in txn PPOMA_CRM and also enabled the u201CObj permitted for distributionu201D for the Sale Org in CRM
I have also downloaded all customizing settings related to Products and Sales areas.
Can someone please help me here ? Is there any customizing settings I need to make in CRM or change the Products in ECC??
Please help here
Regards,
Dinesh Rao

Hi Shalini,
Thansk again , but the problem is not resolved yet .
I creating a dummy product in ECC with correct Sales area details ( as mainatianed in CRM as well) and downloaded this product from ECC to CRM.
But still the sales area is missing for the Product !!
I checked the BDocs as well and there are no errors here as well
What could be the problem ??
Please help
Regards
Dinesh

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

How to transfer data from ECC to CRM via IDocs (Clfmas01),

Hi all,
how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.
Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
Edited by: khaja fareed on Jan 11, 2010 12:44 PM

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

When transferring HR data from ECC to CRM via change pointers

When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advance

Hi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik

Integrating Data From ECC to CRM

Hi Experts,
My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
Problem: to map the data from ecc to CRM , I am supposed to call this RFC Fm ( existed in CRM side) from ECC using RFC Destination.
to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
Thanks & Regards.
Naga Priyanka. T
Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Material Updates from ECC to CRM

Hi Experts,
We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
Regards
Charitha

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Errors in Pricing replication ECC to CRM 2007.

Hello,
When loading the price customizing from ECC to CRM I run into problems. I have loaded the object DNL_CUST_CNDALL.
When I check the application log in transaction SLG1 (Object COND_EXCHANGE, Subobject CUSTOMIZING), I see the following error messages:
Table PRCC_COND_PPD has been posted in the database with errors
Message no. CND_MAP155
Table PRCC_COND_PP has been posted in the database with errors
Message no. CND_MAP155
Table /SAPCND/CTLISTI has been posted in the database with errors
Message no. CND_MAP155
Table FGDC_COND_P has been posted in the database with errors
Message no. CND_MAP155
Table /SAPCND/T685 has been posted in the database with errors
Message no. CND_MAP155
Table PRCC_COND_CT has been posted in the database with errors
Message no. CND_MAP155
The following error message repeats for several hundred condition types:
Error converting field FIELD_TIMESTAMP into /SAPCND/T685 for condition type BI00.
Message no. CND_MAP181
I have reviewed OSS-notes relevant to these error messages and implemented:
- Note 905554 - Error in the initial download of DNL_CUST_CNDALL
I then loaded DNL_CUST_CNDALL again. This did not solve the issue.
I then checked:
- Note 314588 - Errors during correction of /SAPCND/T685-FIELD_TIMESTAMP
I ran report /SAPCND/RV12N001 for some of my condition tables, for example:
Application: CRM
Usage: PR
Table Number: CUS908
I then got the following error message:
Condition table CNCCRMPRCUS908 has a field with initial name
Message no. /SAPCND/GENERATOR040
I then checked:
- Note 514952 - Download of customer-specific tables
I followed the steps in the note, but with no result.
I can see that the entry in table /SAPCND/T681 for
KAPPL            CRM
KVEWE            PR
KOTABNR          CUS908
is incomplete.
Any help much appreciated.

Hi Ashwini
How to download pricng records from ECC to CRM system
I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_PRD
But pricing condition msater data is not showing in CRM system.
Kindly help me in resolving the issue
Best regards
Raghu ram

Configurable products from ECC to CRM 2007

Similar Messages

Maybe you are looking for