Configuração de recebimento de aviso entrega sms

Envio o SMS, e nao recebo o aviso de entrega, qual seria a configuração pra receber a confirmação de entrega?

PELO QUE PESQUISEI, O IPHONE NÃO TEM ESTA OPÇÃO EMBUTIDA NO OS QUANDO SE REFERE A SMS ENVIADO VIA SUA OPERADORA DE CELULAR.
MAIS PARECE QUE VARIOS GRUPOS ACHARAM UMA MANEIRA DE RECEBER AS NOTIFICAÇÕES USANDO CERTOS ARTIFICIOS NO CORPO DA MENSAGEM TIPO:
USANDO A OPERADORA CLARO, DIGITE A MENSSAGEM ASSIM:
*0# PAGUE AS CONTAS AGORAIII
PARECE QUE A INCLUSÃO DO MENCIONADO ARTIFICIO (*0#) NO INICIO DA MENSAGEM ATIVA O ENVIO DA CONFIRMAÇÃO ATRAVES DO SISTEMA DA OPERADORA E NÃO DO IPHONE.
AS INFORMAÇÕES FORAM RETIRADA DOS LINKS ABAIXO E SÃO DE AUTORIA DAS PESSOAS QUE FORMULARAM O TEXTO.
"bastando incluir um pequeno código (asterisco – N – jogo-da-velha) no início do SMS. Eis as operadoras brasileiras compatíveis com o sistema:"
- Claro: *0# Mensagem
- Vivo: *N# Mensagem
- Oi: *N# Mensagem
VISITE O LINK ABAIXO PARA MAIORES INFORMAÇÃO:
http://blogdoiphone.com/2009/09/como-ativar-o-aviso-de-recebimento-de-sms-no-iph one-sem-jailbreak/
http://www.thinkjim.com/2008/07/sms-delivery-reports-on-iphone-3g.html
ESPERO TER AJUDADO.

Similar Messages

N76 SMS center configuration corruption/deadlock

Recently got N76 for my girl friend, for some reason SMSC was not discovered by the phone, she did enter incorrect one. Later, I have created new (additional) SMS center via
"Messaging > Options > Settings >Text message", everything was ok, I was able to send SMS. Then I decided to clean up the mess. I have entered correct phone number in first created message center, and deleted newly created center (which was active at that point of time). For some reason that resulted in SMS configuration corruption.
1. I am not able to send SMS. I am able to receive SMS. That is understandable, as old center was not activated.
2.!!! I am not able to get into SMS Message configuration anymore. When I go "Messaging > Options > Settings >
Text message" it kicks me back to Application menu. Thus I am not able to configure it any more. I still can configure MMS, Email and etc. but not SMS.
3. Any action with SMS now results in phone performance slow down.
4. Cannot create a new SMS or Reply, when I press send, messaging application just closes. No message is saved in outbox or other place.
I have tried to reset phone configuration - did not help.
Any idea how to reset SMS configuration?
Thanks, in advance.

Hi. I did the same thing. Have you found a solution?

How to configure sms

Hi All,
I need to configure SMS in 4.7 where in
1.I need to send a sms from so01.(manually)
2.When a sales order that has been created and been saved, this should trigger an automatic sms confirmation to be sent out.
Wt r the Prerequities to b done.
Should i seperate sms server for this
Wt r steps to b done in scot
Abap code?
Function modules?
How to giv the exact URL in smtp configuration...
The webservice for SMS
Plz expain me clearly ...even though i hav gone thru many forums n notes n sdn notes its confusing
Thanks a lot in advance
Malti

hi,
this note455142 will help u.
regards
ajai

Protocolo de recebimento XML e Email em nuvem

Boa tarde pessoal
Temos aqui na empresa algumas restrições de segurança quanto ao uso dos protocolos POP3 e IMAP. No PI, os protocolos disponíveis para configuração do recebimento do XML NF-e são somente estes. Gostaria de verificar se alguém possui esta mesma restrição e como configuraram o recebimento do XML. Aqui utilizamos o Outlook e estamos também migrando para Office 365 em cloud. Aproveitando, gostaria de saber também se alguém já tem a solução de recebimento XML em servidor cloud.
Obrigada,
Renata

Prezada Renata, espero que tudo esteja correndo bem para você.
Aqui nós tivemos a mesma restrição em relação ao XML. Nós resolvemos criando uma aplicação em Java que recebe e analisa o conteúdo dos emails a partir do IMAP e insere em uma tabela em um banco de dados fora do ECC.
As nossas rotinas de PI, lêem os dados a partir desta tabela com toda a política de segurança aprovada e inserem no ECC os dados gerando os protocolos automaticamente e gravando nesta tabela em um outro servidor.
Esta rotina fica de forma automatizada e concentra as soluções de NF-e e XML deixando o email sempre livre para ser apenas uma especíe de mensageiro dos documentos em XML referentes ao fisco.
Nossa experiência com a auditoria e controles internos foi a melhor possível, uma vez que garante a rastreabilidade de todas as mensagens recebidas em nosso ambiente.
Abraço e boa sorte.

What are the steps to remove SMS Provider traces from a server

Hi,
My client's environment is set up with a standalone primary site. They decided to install a second SMS Provider on a site system also running the Reprting Services Point to provide redundancy in the case the SMS Provider on the primary site
would go down.
They experienced a problem with the server running the second SMS Provider and it went down for about a day. The behavior for SCCM console users was to get an error message preventing them to connect to SCCM; they had to close the console and re-launch it
so it would randomly connect to the SMS provider on the primary site successfully. When a SMS provider is down, it seems the console won't redirect itself automatcally to another provider when trying to connect.
Since it was causing some frustration because console users had to launch it several times before they could connect, someone removed the second SMS Provider using the Site Maintenance wizard on the primary site. The thing is the wizard ran while the second
SMS Provider was down, it removed traces of this SMS Provider from the site configuration, but couldn't remove the actual SMS Provider files and registry entries since the server was down.
Now, only one SMS Provider is active on the primary site server, but we have orphaned SMS Provider files and registry keys on the site system server. Is there a way to remove them cleanly? The site system is still running the Reporting Services Point, so
we cannot remove everything related to SCCM.
Now we prefer to keep a single SMS Provider on the primary site server, since SCCM is not consider critical to the business anyway, and to avoid this issue in the future.
My guess would be to reinstall the SMS Provider from the Site Maintenance wizard and remove it after, but I just want to have feedback from people who might have deal with it in the past.
Tnx for help
Patrick

Hi,
Could you install the SMS Provider from the Site Maintenance wizard while SMS Provider files and registry entries are still there? Please have a look on the thread below, although it is for sccm 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/bb307748-7638-404d-a6a4-982827a051c8/how-do-i-remove-sql-provider-that-was-previously-installed-on-a-remote-sql-server?forum=configmgrsetup
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OpenMarket sms api gives "Connection timed out: connect"

Hello All,
I am new to web applications with sms services.
I am trying to send sms from my java application to mobile device. But I am getting below error.
Aug 25, 2010 10:55:58 AM com.eha.sms.ema.EMACMMessageSendProxy init
INFO: Move to send the receiver initialization.
Destination address = +**********
Source addres = +*****
Sending message to Simplewire...
REQUEST XML ==
<?xml version="1.0" ?>
<request version="3.0" protocol="wmp" type="submit">
     <user agent="Java/SMS/2.9.16"/>
     <account id="******************" password="***************"/>
     <option type="production"/>
     <source ton="0" address="+*****"/>
     <destination ton="0" address="+**********"/>
     <message udhi="false" text="Hello World!"/>
</request>
protocol: http
remote host: ******Some site given to us by open market people that opens on browser**********
remote port: 8080
remote file: /wmp
{main} [10:55:58.722] Conn: added module com.simplewire.http.RetryModule
{main} [10:55:58.725] Conn: added module com.simplewire.http.AuthorizationModule
{main} [10:55:58.726] Conn: added module com.simplewire.http.DefaultModule
{main} [10:55:58.747] Conn: Creating Socket: smsc-01.openmarket.com:8080
{main} [10:56:19.759] Conn: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at com.simplewire.http.HTTPConnection$_A.run(Unknown Source)
Message was not sent!
Error Code: 106
Error Description: A connection could not be established with the Simplewire network. Connection timed out: connect
Error Resolution:
The code I am using is as below.
private void config()
          Properties properties = new Properties();
          InputStream smscmReceiver = EMACMMessageSendProxy.class.getClassLoader().getResourceAsStream("sms.properties");
          try
               properties.load(smscmReceiver);
               System.out.println(properties.getProperty("SMS.SubscriberID").trim());
               System.out.println(properties.getProperty("SMS.Password").trim());
               System.out.println(properties.getProperty("SMS.DestinationAddress").trim());
               System.out.println(properties.getProperty("SMS.SourceAddress").trim());
               SMS sms = new SMS();
               // subscriber settings
               sms.setRemoteHost(" ******Some site given to us by open market people that opens on browser**********");
               sms.setDebugMode(true);
               sms.setRemotePort(8080);
               sms.setSubscriberID(properties.getProperty("SMS.SubscriberID").trim());
               sms.setSubscriberPassword(properties.getProperty("SMS.Password").trim());
               // Message Settings
               sms.setDestinationAddr(properties.getProperty("SMS.DestinationAddress").trim());          // recipient of message
               sms.setSourceAddr(properties.getProperty("SMS.SourceAddress").trim());               // originator of message
               sms.setMsgText("Hello World!");
               System.out.println("Sending message to Simplewire...");
               // submit message and check results
               if (sms.submit())
                    System.out.println("Message was sent!");
     System.out.println("Ticket ID: " + sms.getMsgTicketID());
               else
                    System.out.println("Message was not sent!");
                    System.out.println("Error Code: " + sms.getErrorCode());
                    System.out.println("Error Description: " + sms.getErrorDesc());
                    System.out.println("Error Resolution: " + sms.getErrorResolution() + "\n");
          } catch (IOException e)
          log.error("Load profile sms.properties failed to send Move.", e);
I am using windows 7 and the required info from the java code is picked up from a property file.
destination address is a "+" sign followed by cell number of client in US and I am in diff country.
source code I am using is "+" sign followed by a short code given by client.
I am also not aware what short codes are for.
I am also not sure whether I am passing correct parameters.
I just followed a demo code from the api's sample file. (open market api......swsms-2.9.16 is the jar used.).
would like to know If destination address can be my cell number.
The open market people have configured the demo short code for our SMS messaging account.
This feature will allow us to test our platform to send and receive SMS messages
while we are waiting for our dedicated short code.
Mobile Originated messages MUST start with our assigned keyword(s) to be routed to you.
We have a few keywords but don't know how to use them.
Please help!
Thanks in advance.
Edited by: Vish_1x1 on Aug 24, 2010 11:06 PM

I had a same problem.
It was definately URL and SOAP Action Problem.
Also, I didnt configure the Proxy too.
Please dont waste more time in looking inot other configs.
Just give a careful look at Target URL and SOAP Action, again and again.
Sweta , Please make this question Answerd , it will be useful for other users.
And Bahvesh Deserves good points..
Thanks ,
Deo.

Editing Configuration.MOF For Network Printers/Mapped Drives SCCM 2012?

Question is in Configuration Manager 2007 I would edit the SMS Def MOF file and then run Datashift.vbs on all the clients to add a WMI class for mapped drives for inventory. So most of my clients that I upgraded to 2012 already have that class added
to WMI. I just need to figure out what I need to do on the new server and Configuration.MOF (since SMS Def is missing in 2012) to tell it to collect the newly added classes during hardware inventory. I see that you can click on Set Classes in the client settings
but I don't see where you can check mapped drives or network printers there.

There is no out-of-box solution to handle this task.
But try this. This has worked for us really well. We've got 22000 machines inventoried.
http://social.technet.microsoft.com/Forums/en-US/c08c393d-1ea4-4f6b-8f07-affc0f743193/network-printer-inventory-in-system-centre-configuration-manger-sccm-2012?forum=configmanagergeneral#c08c393d-1ea4-4f6b-8f07-affc0f743193

How could I configure Email in output determination

hi
The client wants to send the Output to cusotmers Email , can u pls tell me how could i configure the E mail in output determination
Thanks in advance
Regards
Dinesh

Hi
SAPconnect provides a standard interface for external communication, which supports sending using telecommunication services, such as FAX, pager (SMS), Internet and X.400, as well as sending to printers and between several SAP Systems. It enables external communication components to be connected to the SAP System.
As of Release 6.10, SAPconnect also provides a direct connection to the Internet using the SMTP plug-in of the Web application server. This enables you to send messages directly to Internet addresses, without using an additional external communication system. As a result, it is also possible to communicate with SMTP-compatible fax gateways or paging gateways, which do not have to be set up specifically for the SAP System, as well as external fax and paging service providers.
See the Useful Note for configuration and setup
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Note 455127 - E-mail (SMTP) in different SAP releases
Note 634006 - ICM messages explanatory note
Note 517484 - Inactive services in the Internet Communication Framework
Note 63480 - R/3 and MS Exchange linking
Note 633265 - SMTP PlugIn: Multi-codepage ability
Regards
Anilsai

SCOT Configuration ECC6

Hi there,
I am using ECC6 on HPUX. Currently within SCOT my default domain is configured and within the SMTP node it states local. Nothing is configured within SICF for SAPCONNECT
I am able to send email - I believe SAP sends the mail to the local HPUX server where ECC resides and sendmail passes the email to the users.
I have 2 problems/questions.
If I have several Finance users which are sending Purchase Orders via email if an incorrect email address is entered for a vendor I would like the end user to be notified to their exchange email account.
If I send an email (SMTP) via SWBP to an incorrect email address I would expect to be notified eventually that the mail was never sent as the address was incorrect, however this does not happen.
If I was to send an email via exchange (NON SAP) this functionality is there.
How can I get this functionality?
Would I be correct in thinking that I need to configure the exchange server details within SCOT and SICF.
The second issue is with the current configuration as it is all the emails remain in scot as in transit.
Any help would be appreciated.
Thanks

Hello,
It sounds like your current configuration does not handle the confirmation of receipt very well.
Your second issue can be fixed by turning the confirmation of receipt off (see http://help.sap.com/saphelp_nw04/helpdata/en/55/609f388b7811d3a33000a0c943858e/frameset.htm)
Regarding your first issue, If you already have an exchange infrastructure in place, I see no reason why you would not want to use it with you SAP servers.
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP gives a very detailed explanation as to how to set this up.
Regards,
Dominik Herzig

CCMS alert notification - sending an SMS on a mobile number.

Hi,
We have set up central CCMS alert monitoring for the systems in our landscape.
Now we want an auto reaction method which can send an SMS to a specific mobile number.
Can it be done using any existing auto reaction method or we need to develop a program in ABAP
specifically to achive this functionality ... ?
We want some reaction method which can respond to the color change in the CCMS alert monitoring attributes .
For eg - as soon as the color value in the alert is set as red , the sms should be triggered.
has anyone achieved this type of functionality .
It would be realy helpful.
Thanks in advance.
Regards
Prince .

SAP Alert Management (ALM) functionality comes into play when business-critical problems occur. Within ALM, conditions for critical situations are predefined. When an alert is triggered in ALM that meets these conditions, responsible or interested parties are determined and informed immediately you need to configure SCOT accrodingly. please check this link:http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Scenario 1)
As of Release 6.20, you can send and receive fax and SMS or paging messages using SMTP. These are packed in e-mails for this purpose. please check Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Scenario 2)
Starting with the SAP Web Application Server 6.20, it is possible to transfer pager and SMS messages via HTTP to a third-party software or to a pager/SMS service provider please check Note 455142 - SAPconnect: Configuration paging/SMS via HTTP.
Note 455127 - E-mail (SMTP) in different SAP releases
Note 455129 - Paging/SMS in different SAP releases
Thank you,
Shyam

Send SMS from SAP

Hi,
I´m very confused with the several threads, and notes about the setting SMS from SAP to Cellulars.
If I want to configure the sending of sms from SAP, I´ve to declare the NODE with HTTP? Or can to setup as SMTP?
If I setting the node with HTTP, I´ve to use my smsprovider, that is not mandatory what my own company mobile,not?

Hello Ruben,
Well its very much possible to sent out sms from SAP System and you need to configure the system according to SAP Setting provided in below 02 SAPnotes.
How it SAP handles outgoing SMS/Paging
Note 455129 - Paging/SMS in different SAP releases
How you need to configure your SAP system.
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
I hope you will get all the information in above 02 SAPnotes.
PS:As of Release 6.20, you can also send and receive fax and SMS or paging messages using SMTP
All the best !!

Mail configuration for core hosted mail servers

Hi,
We have configured scot to send emails from SAP to the domain ids in XXXXX.com.
For testing the port condition :-
We checked if port 25 was open on the smtp server. This was the check. devassp1:devadm> telnet 202.162.244.10 25 Trying... Connected to 202.162.244.10. Escape character is '^]'. 220 ESMTP Is this a succesful check to see if the port is open?
Core hosted mail server
Also, the smtp server is co-hosted and the provider is not willing to add the SAP server IP address to the list of authenticated servers on the smtp server. Is there a work around?
In SAP after configuring scot, we get the error message that Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 5.7.1 <mailid>: Relay a Message no. XS829 Diagnosis An error occurred in program CL_SMTP_RESPONSE Error text: ESMTP error code is not known. Additional information: 554 554 5.7.1 mailid: Relay a System Response Message processing terminated. Procedure
Please suggest what needs to be done.
Thanks
Vijay

Hi
Looks to me some SMTP server configuration issue, Please have look at below SAP notes
Please check you have defined the below entries in your system profile
icm/server_port_1 = PROT=SMTP,PORT=25,TIMEOUT=300,PROCTIMEOUT=600
Then follow below itmes to further troubleshoot if still issue persists
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP.Also check
Note 552616 - FAQ: SAPoffice - Sending to external recipients
Note 402907 - SAPconnect: Sending via ESMTP terminates with a dump
Note 751332 - Error sending mails with several recipients
Otherwise, In general you just do the following configuration and nothing else you have to do in SAP application.
First of all check port 25 is open from SAP server to SMtp server
Also check sap server is define as realay agent in SMTP server.
Do the follwoing step.
1. Use transaction SCOT
2. From tope menu: View -> System Status
3. Double Click on SMTP
4. You will get a window and fill in description
5. Tick the "Node in use" box
6. Enter the hostname of the email exchange server
7. Mail port will be 25
8. Click on the button next to Internet called "Set"
9. You will get another window, in the "address area" box, enter *
10. Click the green check button to exit the second window
11. Click the green check button to exit the main window
12. From top menu: Settings -> Default Domain
13. in the small box that appears enter the domain name which is the last part after the email id ,The domain name would be for e.g company.com
14. You need to define a job to process the email, from top menu: View -> Jobs
15. From top menu: Job -> Create
16. Enter a name
17. Click on "INT" in the list then "Schedule job" button
18. Enter start date and time, then click on "Schedule Periodically" button
19. Enter something like every 10 minutes.
20. the configuraton is now complete. To test it, you need to have an email defined in your user id properties. Use SU01 for that.
21. Use transaction SO00
22. Put Title, and text in the body, then enter your email address below, the recepient type would be "internet address"
23. After a maximum of 10 minutes you should get the email address.
I hope this helps you.
Regards
Sekhar
Edited by: sekhar on Jan 4, 2010 4:01 PM
Edited by: sekhar on Jan 4, 2010 4:05 PM

Configure e-mail key on E51 ?

I have 2 E51's and on one I get sms menu when pressing the e-mail (envelope) key and on the other phone it directly switches to Windows Live Hotmail ... ?
How can I configure the key to start the standard sms menu (and by holding the key starting a new sms)??

Never mind..... answer to my own question 5 min ago :
settings -> one touch keys ...

E72 - receiving SMS's

Can the e72 be configured to display the sms senders number on the main screen upon notification that an sms has arrived? If so, how to configure this? Thanks!

The standard sms client on your phone will only display the number if the senders number is not in the contacts list or if there is a duplication of that number. There is no setting to change this. However, they may be 3rd party applications that may allow you to do this.

SMS configuratios

Hi ALL,
While sending SMS from SAP iam getting error http_communication_failure.
This message iam getting from the methods
system-call ict
did
ihttp_scid_get_header_field
parameters
m_c_msg " > c handle
name " > header field name
value " < header field value
m_last_error. " < return code
system-call ict
did
ihttp_scid_get_status
parameters
m_c_msg " > c handle
code " < status code
reason " < status reason
m_last_error. " < return code
Here iam getting error code as 400. and SMS is not sending to customers.
Here i checked SICF configurations, are Active.
Please suggest me if iam missing any configurations.
Thanks and regards,
Kumar

Hello,
Did you check the following SAP Note ?
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Before you can send SMS messages you need to setup things in SAP via tcode SCOT, you can also perform some tests there.
Success
Wim

Configuração de recebimento de aviso entrega sms

Similar Messages

Maybe you are looking for