Configurat​ion of color in LED notificati​ons

It is missing the possibility to configure color of the LEDs!!!

@Ereeamazing Why search on Google when BlackBerry have a searchable apps world on the phone?
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Similar Messages

  • BB Z10 on AT&T: LED Notificati​ons

    My BB Z10 on the AT&T network has historically used the LED light to notify me of emails, texts, BBMs, etc when in "Phone Calls Only" notifications mode. Recently it stopped using the LED light in Phone Calls Only mode and I cannot figure out why. After some googling, I discovered that several BB10 users have had this problem with their device from the beginning. I have owned my device for roughly 9 months and the aforementioned issue did not start until last week. Something I may have done different is switch notification profiles via the volume keys on the side, I don't normally do this and noticed the LED stopped working in "Phone Calls Only" mode after I did this. Does anyone have any idea how to get LED notifications for texts, BBMs, emails, etc to work in phone call only notifications mode? I want the phone to be silent and not-vibrate for anything but a phone call while blinking at me for new messages. I understand I can go through and customize the "Normal" notification setting to do this but I like to be able to quickly switch from "Normal" to "Phone Call Only." Just to remove all doubt, I haven't installed an unauthorized OS or side loaded anything onto the Z10. There were not changes to the OS (e.g. updates) that coincided with the start of the issue.

    OK, the 1st question would be....how exactly are you switching your "Notification profile" with the volume key??? For  me, that only increases / decreases the media volume regardless where I`m within "Notification"
    It is possible that something may have changed in your settings under "Phone calls only". So go to the "Notification" > "Mode: Phone calls only" and see if everything is turned "ON". If it is, then scroll down and tap on "Applications". You will see a list of "Core Applications". You`ll need to open the apps in question to see which one has its notifications turned "OFF" and turn it back "ON"
    Bob4186 wrote:
    My BB Z10 on the AT&T network has historically used the LED light to notify me of emails, texts, BBMs, etc when in "Phone Calls Only" notifications mode. Recently it stopped using the LED light in Phone Calls Only mode and I cannot figure out why. After some googling, I discovered that several BB10 users have had this problem with their device from the beginning. I have owned my device for roughly 9 months and the aforementioned issue did not start until last week. Something I may have done different is switch notification profiles via the volume keys on the side, I don't normally do this and noticed the LED stopped working in "Phone Calls Only" mode after I did this. Does anyone have any idea how to get LED notifications for texts, BBMs, emails, etc to work in phone call only notifications mode? I want the phone to be silent and not-vibrate for anything but a phone call while blinking at me for new messages. I understand I can go through and customize the "Normal" notification setting to do this but I like to be able to quickly switch from "Normal" to "Phone Call Only." Just to remove all doubt, I haven't installed an unauthorized OS or side loaded anything onto the Z10. There were not changes to the OS (e.g. updates) that coincided with the start of the issue.

  • Seven segment led display with arduino pin configurat​ions

    iam new here.. i am trying to dipaly a numbers on led seven segment display. but i dont know how to cinfigure pin numbers with arduino examples...
    can anyon eexplain the pin configuration in sevensegment led.

    Hi anilkun,
    in the linked example you see that picture. It shows all the needed wires to connect Arduino with 7segment LED.
    What else do you need?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • The color of led when missing a phonecall

    my balckberry is 8700g, and the edition of ROM is 4.2.114
    i found the led color became green automaticaly if i missed a phonecall (it should be always red color unless i recall that missed incoming call, or delete, )
    i 've tried to change the setting as following path profiles--advanced--active--edit and choosed this selection "flashing Led" as Repeat notification
    but it still green when i missed phonecall
    who can help me?

    If you miss a phone call but the caller doesn't leave a voicemail, the indicator doesn't turn red.  It will only blink red while the phone is ringing, but then turn back to green when it stops.  That's how the system works.
    If you get a voicemail or an email, the indicator changes to red. 

  • Color Schemes for Add-Ons

    Hi All
    I have made some form for our client. when our client select the color in general settings other than Classic then that color doesnt effect our add ons. it always appear in Classic color. is there any way to resolve this issue.
    if my SAP Application is green color than i want my add-on's forms also in green color.
    Thanks
    Rupinder

    Hello Rupinder
    This sounds like a bug.
    I would recommand you to open a customer message to the support.
    Have a great day
    Miki

  • . FF Ver 4 is very slow and does perform as well as 3.6. I uninstalled 4 after downloading ver 3.6.16 and that is causing colorfultabs not to color and the Add-ons page is freezing making it unable to use it. Ver 4 runs very slow. Please help.

    It seems my machine does not like your ver4 and 3.6.16. I want the ver prior to 3.6.16. . Since the last 2 updates have not been able to use FF to browse or play Webkinz. It is way too slow. Following the install of 3.6.16 the Colorfultabs is not working and I can't fix it or adjust it because the Add-ons list/page freezes. I have removed/disabled several add-ons and extensions and nothing seems to help. If it were not for IE I would not be able to use my machine. I have 2.5 GB of memory and 30 percent plus of free space on my hard drive. I use Windows XP SP3 if that makes a difference. I don't think I need a lot of add-ons but need to know what I can remove. The feature to open FF without any add-ons is gone for some reason. Please give me back my simple smooth operating FF. Thank you.

    I had all the dot nets in add/remove but discovered they were not installed. Got all up to date. Puter is 2005, I have all that U listed except Win7. I just don't know if I need that or not. Did U say that I need more than the 2.5 GB
    memory that I have? Please tell me why Win7 is better than WinXP.
    FF is running much better now but Webkinz accounts are still loading slower than in IE. I am wondering if maybe I should totally remove all of FF including customizations and personal info and start over fresh with a clean install of ver 4. I am still using ver 3.6.16. Is it possible that this is reason for Webkinz (a flash, java and Unity game) not loading good? Also, are there some of the Plug-ins that I can remove? What Audio players do I need? I have wmp, real player, aol media playback, realarcade, realjukebox, also is Zylom usable? Thank you so much for your help.

  • IMAP Notificati​ons broken after 1.3.5 for read messages

    After updating my Sprint Palm Pre to 1.3.5, my email notifications do not automatically update their status after messages have been read elsewhere.
    For example, prior to 1.3.5, if I recedived 2 new messages on my IMAP account, the Pre would show the notifications for those two messages at the bottom of the screen.  If I then went to a desktop email client and read the two messages on the desktop client, the message status would change to 'Read' on the IMAP server, and the Pre would get rid of the notification for each read message almost instantaneously.   Now, the Pre retains the notification until you actually go into the email app on the phone.
    Anyone else experience this?  
    Rick
    Post relates to: Pre p100eww (Sprint)

    There was really only one thing I was hoping that 1.4.0 would fix and it was this incredibly annoying bug that was introduced with 1.3.5. It is still present in 1.4.0! Now with LED notifications finally officially supported (which I'm really very thankful for btw) this issue has become more irritating than ever, the phone will continue blinking for emails that have long been read elsewhere.
    When can we finally expect a fix for this?

  • T42 Restore factory configurat​ion impossible - but recovery part exist

    Hello,
    I have a T42 (IBM bought in my business school)
    When  I bought it the PC had 4 part in the Hard Drive
    2 part visible
    - C: SYSTEM
    - E: USER DATA
    1 part hidden
    - IBM_Service W:  (the recovery part) - all the program and a 2 drive partition C and D or E
    + BIOS
    To be able to restore the factory configuation I had in the menu to start Windows Two choices
    - Start Windows normally
    - Restore factory configuration
    Due to a problem on the laptop I had to restore the factory configuration 2 or 3 times in the last two yearss. It worked well two times.
    But  Last time the Laptop did not recognize after the restoration the E: DRIVE. It was on the computer but with no name and no possibility to access it.
    I uses TESTDISK to regive a name E to this part and be able to use it and restore the data in it but during the process the Recovery part (Drive W which was hidden appeared on the System list 
    On the same time the choice "Restore factory configuration " on the list of the start of Windows disappear. I use my friend computer to put back on the list the name of the choice but this link can't restore the Factory configuration because it is no longer configurate for it.
    Is there a possibility to boot the PC on the Recovery part in order to restore the factory configuration?
    does this manipulation will keep my 2 drive configuration C: + USER DATA drive (E with all the data saved in it? That works the first two times
    Thanks in advance for your help
    This will help me very much
    Thieum
    Sorry for the english I did my best

    Thumper wrote:
    I also have a T42, but it’s a different model. I once tried my disks
    on a T41 that I was trying to revive, and they didn’t work...
    and was later told by IBM that each machine has unique disks.
    Whoever told you this was mistaken.  With the exception of hardware changes (eg modem from T41 to T42) the disks within a series should work just fine (I've just recovered aT41 with my T42 CDs).  The only difference in using early T42 recovery with a later T42 is the fingerprint reader.  Later T42 disks should work just fine with an early T42.  Go ahead and use your T42 disks on her machine.
    Keith
    Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
    Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

  • Default configurat​ion Report

    Hello
    I hope I'm not creating a dump. anyway.
    One big quesiton about diadem: I use always the same display type: 2D graph with several curves and axes. The default font size is 3 (too big), the default curve thickness is minimum (too thin), no marker on cureves and so on and so on.
    Is there any way of changing the default values for that?
    Best regards,
    Brice
    Solved!
    Go to Solution.

    Hi bricem 13,
    Please see the DIAdem Help for predefined settings:
    "Changing Standard Layouts in DIAdem REPORT
    Use the default function to specify standard layouts in the function groups for tables and axis systems. To assign a user-defined 2D axis system to a button in the 2D axis system function group, complete the following steps:
    1. Select the DIAdem REPORT panel.
    2. Click the 2D Axis Systems group bar.
    3. Right-click a button in the function group.
    4. Select Predefined Setting from the shortcut menu.
    5. Select Yellow as the background color.
    6. Click Change.  DIAdem makes the change. If you click the button in the function group again and position the new axis system in the worksheet, the new axis system has a yellow background."
    Thanks,
    cheggers
    Sascha E.
    Group Leader Applications Engineering
    National Instruments Switzerland
    Attachments:
    Predefine Setting.JPG ‏49 KB

  • How keep BlackBerry Q10 led notificati​on blink longer for third apps ?

    How keep BlackBerry Q10 led notification blink longer for third apps ?

    Use a configurable third party app such as Hub++ or BeBuzzPro
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Impossible to access BIOS configurat​ion and boot options

    I changed the hard disk after a HDD failure in my Z61m and I'm trying to reinstall Win XP but I cannot boot from CD/DVD. I'm trying to access the BIOS to check if the boot otpion from CD/DVD is enabled. I turn on the PC, hit F1, on the screen appears 'Entering BIOS Setup Utility' but after few seconds the screen becomes black and nothing happens. I tried to hit ESC instead of F1 and a boot screen appears: I can see the RAM check, the HDD is recognized and identified, but then the screen becomes black again. If I hit F1 while the RAM check is running, it appears 'Entering Setup...' but again nothing happens. With F12, it appears 'Preparing Boot Device List' for about 15 seconds and then the screen becomes black as well. The only thing I can do is turn off the PC. So, the situation is: 1) The original HDD failed: I tried it in an external SATA case and it doesn't work. 2) The new hard disk seems to be correctly recognized and identified during initial system checks. 3) The Win XP CD works: I tried it in another notebook and I was able to boot and launch Windows set up. 4) The CD/DVD player spins, its LED lights, it makes the regular sound. Thank you in advance for your suggestions.

    I tried external monitor but it doesn't work, neither directly connected to VGA on board nor to docking station port. I mean that no images are displayed on external monitor, it stays in stand by mode without receiving any signal. Frankly I remember that on the second monitor the screen appears after Windows boot, but this is the typical thing that you see every days for years but don't care enough to remember exactly when needed

  • Lock screen notificati​ons missing after update to 10.3

    Hello. 
    After update I have issue with my z30 phone. When i got email/sms/norification it not appear in lock screen. Led notify me correctly, i have "star" mark on bb hub app and when i open app, and when i open app, and start closing it, notification icons show on the left side of screen. If i finish closing app, they are missing to. I have turn on "notification on lock screen" option in lock screen options. 
    Anyone can help me with this issue?

    we are waiting for a fix.
    they are working on it http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do;jsessionid=2C91D1A432834B2F4D143A5654B83034?​...

  • The "write key" configurat​ion file vi use of "trim string" prior to writing the data can modify any string data written.

    I tried to use the config VIs to record some front-panel settings for later restoration, one of which could be a single space character (part of a string parsing system).
    I soon discovered that whenever I tried to save that single-space value to an INI file, only a null string was saved.
    After doing some digging I discovered that buried in the Write Key vi is a worker vi called Config Data Modify that uses Trim String on the string data before it is written to the file and that's what was eating my string character. I don't know whether this is a bug or a feature but there are at least three ways to fix it.
    1) Assuming you want to leave the library VIs alone, you can pre-process any stings sent to "write key" to replace all spaces with "\20" and then post-process all strings read using "read key" to replace all instances of \20 with spaces.
      and if you don't mind modifying the library VIs, either to save/use under a different name or to stick back into the library in a modified state (caution - can cause problems when you move code to another machine with an un-modified library) then...
    2) You can yank the trim-string out of the Config Data Modify vi and hope that it does not have any undesirable side effects with regards to the other routines that use Config Data Modify (so far I have not found any in my limited testing)
    or
    3)  You can modify the string pre-processing vi, Remove Unprintable Chars, to add the space character to the list of characters that get swapped out automatically.
    Note that both option #1 (as suggested above) and option #3 will produce an INI file data entry that looks like    key="\20Hello\20World\20"   while option #2 produces an entry that looks like   key=" Hello World "
    The attached PDF contains screenshots of all this.
    Attachments:
    Binder1.pdf ‏2507 KB

    Hi Warren,
    there's a 4th option:
    Simply set the "write raw string" input of the write key function to TRUE
    This option only appears when a string is wired to that function!
    Just re-checked:
    I think it's a limitation of the config file format. It's text based and (leading) spaces in the value are "overseen" as whitespaces. So your next option would be to use quotes around your string with spaces...
    Message Edited by GerdW on 05-02-2009 08:32 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • "Display cannot switch to secondary landscape with this configurat​ion" Error on x201 T

    Hi, I've just bought x201 for 2 weeks. Today I tried to rotate the screen in tablet mode  so I can get the battery with my hand when I read documents but after rotation  and after just 1-2 second it automatically get back to primary landsacpe view and gives me this error. I wonder what is the problem and more importantly what is the solution?
    thanks

    More info: I turned off auto-login, and was able to log in to my test account. Then, I was able to use fast user switching to switch to my main account. I will try again restarting into my main account and see if I can switch to Test. This failed consistently before I posted here. Perhaps the "sense Mac guru" circuit kicked in and cured the problem. I'm about ready to turn in so won't post a follow-up until tomorrow. Right now, I need to use my two accounts to get the job done (a writing job with screen shots of a new unaltered account). Then, I'll go back to trying to see if the problem still exists when I log in to the main account first.

  • How to open a configurat​ion file with a relative path?

    I want to open a configuration file during the initialization of my application (first "state," u can say) and I am using "Open Config file.vi" and tried to pass the config file's path as "data\myconfig.ini" and the "File exists?" vi didn't give any error (simply, the output was "false") but the Open config File gave an error.
    If I pass an absolute path "D:\xyz\xyz\myconfig.ini" it works fine. Isn't it allowed to use "relative path" as I remember using it before for other tasks?
    I actually prefer to have this file in the "data" folder that my application's setup will create in the destination directory while installing the application, because it will be easy when I want to ask the user to open and edit it. Or, I would just put it in "C:\" which exists on all the windows computers, but then it would be too much open.
    Thanks ahead!
    Vaibhav
    Solved!
    Go to Solution.

    Relative paths have sometimes a meaning for command line tools (where a relative path gets appended to the current path, which usually is the executables directory).
    But for Windows GUI applications that makes not much sense. Windows also maintains a per process current path, but that path gets updated by several Windows APIs, one of them being the File Dialog. So whatever your user has last selected in any file dialog inside your application will from then on be the applciations current path. It should be clear that with such a braindamaged current path implementation it has basically no useful meaning, and LabVIEW consequently does not do path expansion, where relative paths are expanded by prepending them with the applications current path.
    Also LabVIEW uses mostly the Windows 32 Bit API, which does provide the current path implementation but does almost not use it in any of its file operations. The use of that feature is mostly reserved for the Windows shell API, which is a higher level API that can as best be described as a collection of various APIs that have been thrown together by whatever some MS developer felt at the moment. You can not by any means call it a designed API at all, and LabVIEW makes almost no use of it, as it needs lower level access, to make its operation similar in its working across all the platforms, LabVIEW can run on.
    So while you can work with relative paths inside your application (and actually should as much as possible to make your application not depend on a particular location) you should make that path absolute whenever you pass it to a function that actually accesses a file somewhere.
    Rolf Kalbermatter
    Message Edited by rolfk on 09-08-2009 11:31 PM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

Maybe you are looking for