Configurate the integration engine of an R/3

hi experts!
I need to configurate the integration engine of an R/3  receiver .... ( R3 SENDER>XI-->R3 RECEIVER  )....in order to be able to see aynchronous messages (corrects an incorrects) and asynchronous messages (corrects), and honestly speaking i don't know hot to do it or the values that i have to chose.
the parameters that I have, are this:
ARCHIVE----
PERSIST_ARCH_MANUAL_CHANGES
ARCHIVE--PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
SYNC
DELETION-----PERSIST_DURATION_ERROR--
SYNC
DELETION-----RELATED_OBJECTS--
ASYNC
DELETION-----RELATED_OBJECTS--
ROWS
DELETION-------ROWS_PER_LOOP
HTTP_PLAIN----SUPPRESS_URL_PARAMETER
IDOC----
EXTERNAL_MAPPER
IDOC----
SYNTAX_CHECK
IDOC----
XML_CONVERSION
MONITOR----
CCMS_MONITORING
MONITOR----
QRFC_RESTART_ALLOWED
PERF----
DAYS_TO_KEEP_DATA - -
AGGREGATION_ITEM
PERF----DAY_KEEP_DATA -
MEASUREMNT_ITEMS
PERF----
MAX_ENTRIES
PERF----
MEASUREMENT_LEVEL
PERF----
MEASUREMENT_PERSIST
RFCADAPTER----LOGGING
RUNTIME-------ACK_SYSTEM_FAILURE
RUNTIME-------CACHE_DIRTY_READ
RUNTIME-------ENGINE_TYPE
RUNTIME-------ENTRY_LOCK
TUNING----
EO_OUTBOUND_PARALLEL
TUNING----
EO_OUTBOUND_PARALLEL_SPLIT
TUNING----
IS_RETRY_LIMIT
and my actually configuration is this:
ARCHIVE    PERSIST_DURATION          ASYNC   2        1
DELETION   PERSIST_DURATION          ASYNC   2        1
DELETION   PERSIST_DRATION            SYNC     2        0
DELETION   PERSIST_DURATION_ER    SYNC     2        1
MONITOR    CCMS_MONITORING                        1        0
MONITOR    QRFC_RESTART_ALLOWED             1        0
RUNTIME    ENGINE_TYPE                         LOC UNDEFNED
RUNTIME    IS_URL                                        des:/XID
THANKS...

Hi,
What you are searching for is only about RUNTIME category parameters. Try changing parameters LOGGING (for async) and LOGGING_SYNC from default to 1. You can also try some other parameters, you can search for the documentation for each one or just changing and testing.
ACK_SYSTEM_FAILURE
ACL_CHECK
CACHE_DIRTY_READ
CACHE_REFRESH_PACKAGE_SIZE
ENGINE_TYPE
ENTRY_LOCK
ERROR_ON_NO_RECV_FOUND
HTTP_TIMEOUT
IS_RFC_DESTINATION
IS_URL
LOCK_MESSAGE
LOGGING
LOGGING_AMF_ERR
LOGGING_PROPAGATION
LOGGING_SYNC
PACKAGING
QUEUE_COUPLING
RFC_DEST_QUEUE_COUPLING
TRACE_LEVEL
TRACE_LEVEL_PROPAGATION
regards.
roberti

Similar Messages

  • Auto Cancellation of Messages in the Integration Engine.

    Dear all,
    Issue: Auto Cancellation of Messages in the Integration Engine.
    Description: Actually Today, I'm facing Problem in message mapping and its showing error "JCO_SYSTEM_FAILURE". Finally the message is Auto Canceled and showing the status in the Message Monitoring as Canceled with Errors.
    I have doubt here how the messages are Auto Canceled with Error? Is there any system or ABAP program which cancelling these messages?
    Waiting for yours valuable reply on the above issueu2026
    Edited by: BhavinPatel on Oct 7, 2010 8:15 AM

    Hi Bhavin,
      Two report program are there to cancel error msgs automatically..
    1) RSQIWKEX
    2) RSXMB_CANCEL_MESSAGES
    Regds,
    Pinangshuk.

  • Using the SOAP inbound channel of the Integration Engine

    Hi,
    I am following the blog of Stefan Grube.
    /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
    However I have difficulties.
    Is this blog still relevant for SAP PI7.10?
    I have set this up as a test for a scenario I have.
    Current Scenario NOT using your Blog and working perfectly.
    SandBox PI       Development PI
    File > SOAP  >   SOAP > ABAP Proxy
    What I am attempting now is.
    SandBox PI      Development PI
    File > SOAP  >  Integration Engine > ABAP Proxy
    I am using our SAP PI Sandbox to push a SOAP message using a Receiver SOAP adapter channel.
    Transport Protocol: u201CHTTPu201D
    Message Protocol: u201CSOAPu201D
    Conversion Parameters:      u201CDo not Use SOAP Envelopeu201D
    Target URL: u201Chttp://<Integratio Server Host Development PI>:<Port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=FigmentD&Interface=urn:figment-co-za:fleetcard:efuel_50ppm^oa_Msg50ppm&QualityOfService=ExactlyOnce&sap-user=<PIAPPLUSER>&sap-password=<PASSWORD>u201D
    SOAP Action: u201Chttp://sap.com/xi/WebService/soap1.1u201D
    I am however getting the following error on the SandBox Pi AE.
    u201CSOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 MOVED TEMPORARILYu201D
    Please can you assist in this matter.
    Regards
    Willie Hugo

    Hi williem,
    Stefans weblog works great. The error you are getting is some wrong data you are sending. Please verify the data you are sending is correct. Also check this threads for the same errror:
    ADAPTER.HTTP_EXCEPTION / HTTP 302 Moved Temporarily
    Re: SOAP client receives HTTP 302 Found
    Re: Synchronous RFC-XI-Web Service with no request method
    HTTP Error (302) Found when calling Web Service on XI
    Regards,
    ---Satish

  • Change status for 18 million messages in the Integration Engine

    Hello there!
    I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
    The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
    What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
    Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
    Thanks a lot in advance.
    Carlos

    Raghu.
    I've done the following:
    1. I've executed SE38 tx code.
    2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
    3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
    4. There are no available variants, so I clicked on the "Execute immed." button.
    5. The job starts. I can monitor it on the SM37 tx code.
    6. It only deleted 20 messages.
    What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
    what do you think of it??
    regards
    Carlos.

  • How to call the integration engine not the remote function.

    Hi!
    I want to get the data from the client 000 with an rfc call through the xi (client 001). But when I call the function via rfc, the funciton is executed in the client 001, instead of forwarding the call to the integration engine.
    How can I forwarded to the engine this call?
    I only made a sender communication channel in the DI which is an sener adapter type RFC.

    Thanks for the reply.
    But I have no receiver channel yet. so i can't even reach any server if my call would be catched by the intergration engine.
    But unfortunately I can reach the target system without the engine.
    I use java connector to connect the external system to my intergration server.
    Please help.

  • Registration of Business system for the Integration Engine Java in the SLD issue

    Hi,
    We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
    - Configuration Wizard: PI-AEX initial setup
    - Configuration Wizard: PI Self Test for AEX
    However when we were Checking the AEX Configuration as per help.sap.com
    Check the registration of a business system for the Integration Engine Java in the SLD:
        Enter https://<host>:<port>/sld .
        Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
        The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
    More information: SAP Note 1435392
    for us the Pipeline URL is as below
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    and the rest " ?ximessage=true "  is not there.
    Also we ran the below wizard
    Configuration Wizard: PI Self Test for AEX
    and it finished successfully without any issue.
    Any Suggestions what could be missing.
    Thanks,
    Regard
    Ahmed Mohammed

    Hi,
    I found the below SAPNOTE which confirms that the Pipeline URL should be
    http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
    1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
    However on help.sap.com it is different.
    Any one experienced the same ?
    Regards
    Ahmed Mohammed

  • Atack interface directly in the integration engine

    Hi guys.
    Id like to know how to make to consume a sender interfece directly attacking the integration engine.
    We work with an EDI enterprise and we only provide them the interface XSD, inteface name, interface namespace, remote user and password and they achive to consume this inteface but I don't know how.
    There isn't any sender channel assoicate to this sender interface...
    How could they get this? Java?
    Thanks a lot!!!

    Hi,
    You can directly post to integration engine from your EDI using the below URL if thats what you are looking for.
    http://<host>:8000/sap/xi/adapter_plain?namespace=<ns>&interface=<intface>&service=<BS>&QOS=<EO>&sap-client=<003>&sap-language=<EN>&sap-user=<user>&sap-password=<password>
    This would be a direct HTTP communication and no sender channel is required. its served by the integration engine itself.
    please check
    http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
    regards,
    francis

  • Messages "to be delivered" at the integration Engine

    Hi
    Since Yesterday, we have a lot of messages with the status "to be delivered".
    I have checked the SMQ1, the SMQ2 and nothing is there, but I saw 2 entries in SM58, blocked.
    I deleted those entries but the system is still not working.
    SMQR is showing the process as "inactive", and if I do not start it manually, it does not start automatically, but even starting it manually, nothing seems to happen.
    I am unable to delete the firtst message that stays "to be delivered" its status is Cancelable No, Repeatable No.
    The messages are in the Integration Engine.
    I checked with no luck:
    - Register Queues and Activate again the Queues
    - Transaction SLDCHECK shows everything Ok
    - AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER  and INTEGRATION_DIRECTORY_HMI seem to be Ok
    - Stop and Start the SAP
    - Refreshing the Cache
    what else to check?
    many thanks

    Status: TO_BE_DELIVERED
    Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
    TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
    Solution:
    This is done via the Messaging System receive servlet:
    http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
    /<PROTOCOL>
    Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
    1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
    to see if they are blocked
    2. We can check the messages:
    AdapterFramework
    com.sap.aii.adapterframework.serviceuser.language
    com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
    com.sap.aii.adapterframework.serviceuser.pwd
    ApplicationSystem
    com.sap.aii.applicationsystem.serviceuser.language
    com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
    com.sap.aii.applicationsystem.serviceuser.pwd
    in the exchange profile to make sure the right passwords

  • What messages does it shows the integration engine(sycn/ asyn)?

    What messages does it shows the integration engine(sycn/ asyn)?

    Status: TO_BE_DELIVERED
    Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
    TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
    Solution:
    This is done via the Messaging System receive servlet:
    http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
    /<PROTOCOL>
    Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
    1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
    to see if they are blocked
    2. We can check the messages:
    AdapterFramework
    com.sap.aii.adapterframework.serviceuser.language
    com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
    com.sap.aii.adapterframework.serviceuser.pwd
    ApplicationSystem
    com.sap.aii.applicationsystem.serviceuser.language
    com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
    com.sap.aii.applicationsystem.serviceuser.pwd
    in the exchange profile to make sure the right passwords

  • Regarding  error in the INTEGRATION ENGINE URL

    hai guys pls go thru this question carefully,.
    when i click on INTEGRATION ENGINE  and  BUSINESS PROCESS ENGINE IN RWB ,integration engine is in yellow colour status instead of green colour and th result of SELF TEST IN RWB is: Is WEBSERVICE security available? what it mean how can i have my I.E in green colour status?
    and the result of self test for  BPE is : check the entries from HR control tables? what it mean?
    as a result of above errors am not able to test the msg BY SPECIFYING THE url OF I.E and am getting error as:HTTP-404 -not found
    hope u understand t he problem pls revert me back with suitable answers

    hi
    Check this
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Re: ERROR HTTP 404

  • Undesrtanding Proxy communication with the Integration Engine

    I want to understand all the process in a client proxy communication. I know that the Local integration engine sends a PI-SOAP to the Central Integration Engine, and the local integration engine makes the communication with the ICM in the SAP PI side. My question are the next:
    1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
    2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
    Thanks in advance.

    HI,
    1. SAP documentation mentions that the XI Adapter is necessary. Where is it located?, after or before of the ICM in the SAP PI side. What is it function?, because the message is already in PI-SOAP format.
    2. How does the local integration engine send the PI-SOAP message? Does it need an XI-Adapter ?.
    -->XI Adapter is necessary only at the receiver side not at the sender side, by using proxy pre-configuration steps and proxy framework message from the sender system(Client proxy) will reach PI system. So, in this case XI adapter is not necessary(adapterless communication).
    Proxy Framework which consists of Proxy Generator and Proxy Runtime:
    Proxy Generator- Converts ABAP corresponding elements to WSDL corresponding elements and viceversa and by using Proxy Runtime, local Integration will be connected to Central Integration.
    When a request is sent form client proxy-->ABAP corresponding elements will be converted to WSDL elements and local integration engine will be connected to central integration engine and whole process will be done.
    If the receiver system is SAP, and since there can be many SAP systems connected to PI, to send data from PI to that particular receiver SAP system, PI needs the receiver system details like business system name etc. So, XI adapter is manadatory only at the receiver side.
    check out this blog for more info:
    [http://www.****************/Tutorials/XI/ABAPProxy/page1.htm]
    Regards,
    Sunitha

  • Doubt in Configuring the Integration Engine

    Hi,
    We maintained the Integration server URL in SLD in the Business System part which points to ABAP stack...
    But in SXMB_ADM we didnt configured the IS, we just have the parameter of IE as HUB. thats it.
    Do we need to Configure the IS also in the SXMB_ADM????
    Regards
    Suman

    Hi,
    On the Integration Server:
    In sxmb_adm -> IE Configuration, you need to maintain the role of the system as 'Integration Server'. Do not enter any URL for the IS.
    We did This as u said adn we have the info. like u said only
    our basis configured like that only before u said
    On the Application System
    In sxmb_adm -> IE Configuration, you need to maintain the role of the system as 'Application System'. Enter the URL to the entry pipeline of the integration server (http://<PI_Server>:<port>/sap/xi/engine?type=entry).
    This we didnt maintained any thing in the Application server.
    Even though we are able to get process the Files. we are able to see all the pipeline steps in MONI.
    This is IDOC----File Scenario
    Regards
    Suman

  • MTOM support in the integration engine

    Hi,
    Short description of the process.
    3rd party application -> PI WSDL -> SAP ERP
    A 3rd party application sents a request to our WSDL on PI and the PI
    starts a process (BPM). After the process is finished, PI sents the
    result to SAP ERP over XI adapter.
    Because the 3rd party application cannot add authentication parameters
    for our Web Service we changed our URL to a service in SICF.
    sap->xi->engine and added default authentication parameters. So that when the 3rd party application sents a request to PI, PI will not ask for
    authentication.
    (this
    thread explains the problem with authentication and why we did used the
    SICF solution. first entry by Michal Krawczyk)
    Now, when the 3rd party sent a message (SOAP message with MTOM) with
    attachment it is recognized by PI as a Multipart message.
    The Service in SICF which gets executed when the message comes calls a
    class inside. (cl_xms_http_handler) This class gets an exception while
    parsing the MTOM enabled message. And it does not sent the message to the
    PI engine.
    Is the MTOM feature supported by this class? If yes, what may be the problem.
    Thanks.
    Sample MTOM Message:
    --MIMEBoundaryurn_uuid_B7A0A8F29AF9AF0E5F1285180614419
    content-type: application/xopxml; charset=UTF-8; type="application/soapxml"
    content-transfer-encoding: binary
    content-id: ïş
    ¢Sr ñ Fu02C6...
    MIMEBoundaryurn_uuid_B7A0A8F29AF9AF0E5F1285180614419

    Moved to Axis adapter which solved our problem

  • What are default adpters in  ABAP stack  in the Integration engine

    Hi, May I  know the what are the default adapters in  ABAP stack and in Intergation engine.  One I know is IDOC,  which we dont need to configure as outbound, whats others.
    Thanks

    Hi,
    also sender http adapter can be found on abap stack
    all the rest have to be configured on the java stack
    Regards,
    michal

  • Bypassing integration engine in pi 7.0

    Hi
    Am supposed to work on bypassing the integration engine in case of file to Jdbc. Am working on version pi 7.0. How can I bypass integration engine ?

    hi,
    Am supposed to work on bypassing the integration engine in case of file to Jdbc. Am working on version pi 7.0. How can I bypass integration engine ?
    as per my knowledge(bypassing the integration engine in case of file to Jdbc) that is possiable from pi 7.1 by using ICO(AAE) concept only .
    thanks,

Maybe you are looking for