Configuration - "advanced receiver determination"

Hi,
Has anyone ever come across something called "advanced receiver determination" in Integration Builder: Configuration (Integration Directory).
I am even trying to figure out where it is seen in Integration Directory.
If anyone is aware of it then can please let me know what it is and the situation where it is used?
Regards,
Mateen.

> Thanks a ton. It was my first post and the response
> time was awesome...
> SDN Rocks!!!
Hope you spread the word
Regards
Bhavesh

Similar Messages

  • Context object not visible in configuration (for receiver determination)

    Hi,
    I've created a context object and depending on that I want to forward the message to a specific receiver. But when in that pop-up window for the receiver determination I cannot find the context object. I can only find the technical context objects defined by SAP.
    Do you have a solution for that?
    Regards
    Volker

    Hi Volker,
    you can solve your task by using a <a href="/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16 Receiver Determination</a>
    Regards,
    Udo

  • Receiver determination not found for one interface

    Hi,
    I am receiving the message via SOAP and then sending to SAP as IDOC.
    The communication is party o partyless communication.
    I have configured 2 receiver determination for the same sender and receiver but with 2 different interfaces.
    When i test the scenario via SOAP tool only one gets  executed and the second one neither throws an error nor getting executed.
    I think i have a error in the configuration that i did for the 2nd interface since i am using the 1st receiver determination which has been created already ?
    but in the Quick Test tool and Test tool in ID both the receiver determination is working fine.please provide the inputs
    Thanks in advance,
    Rgds,
    Vasanth.

    Hi All,
    Thanks for all of your replies.
    I have activated all the objects and checked it again once.
    As i said earlier the sender and receiver are same and that's why i have been pushed to create 2 receiver determinations for the same file(not IDOC as i said above) to be dropped in to two different locations.
    Also the configuration is party in sender to partyless in receiver.
    To give a clear explantion:
    All the objetcs are activated and works fine when i test in the test tool in ID by specifying the inetrface and namespace.
    Sender1 - Int1 - sap1.com - SA - RD - ID - RA -Receiver1  = working fine when tested by ID test tool
    Sender1 - Int2 - sap2.com -SA- RD - ID - RA Receiver2  = working fine  when tested by ID test tool
    RD = Receiver determination / SA = Sender Agreement
    It is not working when i send the same file thru SOAP client tool and only one receiver determination is working and another is not.
    Any idea ?
    Thanks,
    RGds,
    Vasanth.
    Message was edited by:
            Vasanthakumar Balasubramani
    Message was edited by:
            Vasanthakumar Balasubramani

  • Enhanced Receiver determination - for Integration Process

    Hi,
    Just wanted to confirm that if it is possible to have more than one Receivers, with Enhanced Receiver Determination and one of the Receiver happens to be Integration Process. I know with Enhanced Receiver Determinations you can find more than one Receivers at Run time, however the key question is, if in addition to normal Receiver Systems (like SAP R/3 or Web Services etc), if we can also kickoff Integration Process within Enhanced Receiver Determination.
    Thanking in advance.

    as said by Udo Martens
    Assumedly the different receivers are using different Inbound Interfaces (a BP is using an Abstract Interface). Therefore you would need for each different receiver a own Interface Determination referring a own mapping.
    refer this wiki  http://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=131760630&version=5 to Know how to  configure Enhanced receiver determination  and Interface determination for each receiver .
    In your case one of the receiver will be Integration process

  • Q? Receiver determination error ????

    Hi all.
    I wana transfer from R3 IDOC to XML with FTP service.
    Although I think configuration completely was finished, happens error.
    How can i correct?
    It's results from test configuration.
        Receiver Determination  <Not found>
           Internal Error
           HTTP connection to ABAP Runtime failed.
           Error: 403 Forbidden
           URL: http://R3:8000/sap/xi/simulation?sap-client=
           User: XIDIRUSER Check
    =======================================================
    Scenario : R3 IDOC -> FTP XML (import Ext Definition DTD)
    1) create Business Service System     : R3, FTP
    2) create Message Interface about FTP : MI_FTP_in
    3) create Interface Mapping R3 & FTP  : IM_R3_to_FTP
    4) import business system about FTP server : FTP
    5) create Receiver Determination : |R3|IDOC_inf
         sender : R3
               - interface : IDOC interface
         configured Receivers
               - Service   : FTP
               - Receiver  : FTP
               - interface : MI_FTP_in
               - Mapping   : IM_R3_to_FTP
               - Receiver Agreement: FTP_file_adapter
    6) create Interface Determination: |R3|IDOC_inf||FTP
         Sender   : R3
               - interface : IDOC interface
         receiver : FTP
         Configured Inbound Interface
               - Inbound interface  : MI_FTP_in
               - interface Mapping  : IM_R3_to_FTP
    7) create Receiver  Agreement : |R3|IDOC_inf|MI_FTP_in
         Sender   : R3
         Receiver : FTP
               - interface : MI_FTP_in
               - Receiver Channel : FTP_File_Adapter
    ========================================================

    Hi,
      Please can you check you Cache is updated or not.If cache is succesfull then check the Port & RFC Destination and Partner profiles  R/3 side and XI side.
    R u testing this scenario using WE19.
    If using we 19 then check the your sender information and receiver information (I mean to say Port,Parner...with outbound parameters )
    Regards,
    Venu.

  • File to RFC scenario - receiver determination problems

    Hi ,
    Im trying to work out a flat file to RFC scenario, and am facing problems in configuring the receiver determination .
    While creating my receiver determination, in the configured receivers, when i click on the F4 help to select service, i do not see the business system that i configured in SLD .
    This system i have configured as an WAS ABAP system and provided all relevant data. I can also import objects from this system into IR, so i dont think i have set it up wrongly. I have also created RFC destination .
    Is there some setting that has to be made that im missing ? Could somebody point out why im not able to see this system in the list of business services available at receiver configuration time ?
    Thanks,
    Joe
    I also cleared the SLD cache by the way.. that didnt work either .
    Message was edited by:
            Joe Stein

    Thanks a lot for you replies guys , but problems still not solved ;
    1. I looked at the blog given and ive done everything pretty much as given . My problem lies in not finding the business system itself  in the list of services for the configured receiver. How to implement this has not been shown in the blog.
    2. I tried refreshing the cache and checking again, but it still doesnt show me the necessary step.
    SOS !
    I checked in the inbound system , and found that an RFC wasnt created for the XI system . I created that but i still cant see this system as a business system when i try to create the receiver determination . Do i need to recreate the technical system in the landscape to incorporate this change ?
    Any pointers at all ??
    Message was edited by:
            Joe Stein

  • IDoc2FIle:Receiver Determination Error

    Hi all,
    I have done idoc2 file scenario and i got the status as receiver could not be determined in SXMB_MONI.
    Please Can anyone solve this issue?
    Thanks,
    Radhika

    Hi,
    I think you are not configured the receiver determination properly,
    Check you Xi Configuration in ID with the help of this Blog
    Test Your XI Configuration With The New Test Tool
    Regards
    Seshagiri

  • Condition Receiver determination

    Hi,
    I have a input structure something like this...
    RECORD
    HEADER 1..1
       H1
       H2
       H3
    ITEM1  ( 1...Unbounded)     
       I1
       I2
       I3          
    ITEM2 
       I1
       I2
       I3     
    ITEM3
       I1
       I2
       I3          
    I have 2 receivers for this scenario, based on I2 value ( 2nd field of Item segments), I need to by pass this information to corresponding receiver. Something like if I2=A then map the message to Receiver1 and of I2=B then map the message to Receiver2. an we achieve the same in XI. If yes, can you guide the same.
    Note: I have two different mappings for the two receivers.
    -Esha

    Thanks for the quick reply....I have 2 receivers configured in Receiver determination, say R1 and R2.
    I dont have any conditon on R1 system. But for R2, based on some value from input message it should be routed to corresponding interface mappings. I have placed a condition in Interface determination.
    NOte: I have two mappings ( 2 interface determinations) for R2 itself.
    I have tried with the same condition stuff with RD and ID..but still its not working. only my R1 stuff is working...did I miss anything here? Can you help me out.
    -Esha

  • No Receiver Determination

    I am working on a JDBC-XI-File Scenario. I have multiple file receivers.
    When I tried testing the scenario giving <TEST> in the update query option in jdbc adapter, I am getting an error saying no receiver determination.
    I could see my message sent successfully in the RWB and all my adapters are also functioning. Can anyone please suggest a solution for this?

    Linsy,
    Would suggest a relook,
    Look into the message in MONI. What is the sender service, what is the sender interface name and what is the interface namespace. Is this the values for which you have configured the Receiver Determination?
    Check if your receiver determination is active in the ID and make sure that all cache Notifications are in green.
    Regards
    Bhavesh

  • Error while creating Enhanced Receiver Determination

    Hi,
    My Scenario is File to File and in my scenario i am using Extended Receiver Determination as  per requirement.
    In  Receiver Determination(Extended) even though i am entering Operation Mapping ..an error occured
    Checking advanced receiver determination...
      Enter a mapping
    I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same  error...
    Can anyone please tell me where i went wrong??and How to fix this issue??

    I thought it is because of Cache refresh ..and i have done it ..But no use..Gettig the same error...
    did you perform a full cache refresh also? If you have Operation Mapping defined with receiverDetermination as target and if it is activated then there should not be any problem in selecting the same in Receiver Determination?

  • Receiver Determination - Configuration Overview for Receiver Determination

    Hi All,
    I was trying on some tutorial for Calling RFC(sender) and creating a File at Receiver site.
    I've configured all the required setting at the Design: Integration Builder.
    As for Configuration: Integration Builder. Until the Step where I required to setup the Receiver Determination, there is this part "Configuration Overview for Receiver Determination". where i have to maintain the "Receiver Service", else i will hit this error "Enter the receiver service".
    The steps which i followed was :
    1. Create 2 Communication Channel for Sender/Receiver in the Business System.
    2. Create a Sender agreement.
    3. Create a Receiver agreement.
    4. Create a Interface determination.
    5. Lastly "Configure the Overview for Receiver Determination"  for   Receiver Determination
    The problem which I'm facing now is I have nothing in the "Configure the Overview for Receiver Determination" at all even i have created the sender/receiver agreement and interface determination.
    While some troubleshooting, under the If No Receiver Is Found, Proceed as Follows: I tried choosing the "Continue Message Processing with the Following Receiver" radio button and choose the Receiver for the Service then hit the save button.
    The error "Enter the receiver service". pop up but now, the Receiver service was shown under the "Configure the Overview for Receiver Determination". When i try choosing back the "Terminate Message Processing with Error (Restart Possible) and hit the Save button. The Receiver service goes missing again.
    Any Idea what happen ? or anything i missed out ? thanks in advance.

    Hello
    Check if you have the issue in the kba #1538009 Error When Executing Open - Object not found.
    Also see note #1466011 Usability Improvements in Directory:
    o Don't show deleted objects in navigation tree
    When you delete an object in Directory the link to this object is not
    automatically deleted from Configuration Scenario. You need to manually
    open every scenario and remove such 'broken' link. In scenario editor
    broken links are displayed in grey font and therefore can be easily
    identified. Unfortunately the navigation tree in 7.1 (in contrast to
    XI3.0) doesn't make difference between existing and broken links and
    shows them as they all leads to existing objects.
    Regards
    Mark

  • Receiver Determination, Configure Receivers, Condition configuration alert

    Hello Colleagues,
    when i try to configure condition area under Configured Receivers at Receiver Determination i get following notification:
    Message Interface does not exist in any software components installed on this business system.
    Could tell me someone where is the problem?
    Many thanks in advanced!
    Regards,
    Jochen

    > Hi Krishna,
    >
    > the message type "INTERNAL_ORDER.INTERNAL_ORDER01"
    > exist under Software Componenten Version\Imported
    > Objects\IDocs at IR and is activated.
    >
    > Regards,
    >
    > Jochen
    Under which SWCV it exists in IR?
    As pointed by Bhavesh, you have to add the product that contains this SWCV to Technical System which contains the Business System you're trying to use that interface with. It's done in SLD.
    When you select the product, make sure you mark the proper SWCV in the left panel, then save it. It'll be added to that Technical System. But you still need to go into the specific Business System and select that SWCV, in order to properly associate it to the BS.
    In the future, as a project best practice, make sure you follow these steps b4 starting IR/ID development.
    1. define your project SLD (Technical/Business Systems);
    2. create/import the Products/SWCVs you're going to work with;
    3. associate the Products/SWCVs to the relevant Technical/Business Systems in SLD.
    Regards,
    Henrique.

  • Configuration Scenario Builder - Receiver Determination Problem.

    Hi  I am Follows  configurates Integration Scenario to SRM-SUS scenario in XI
    In Model Configuration.  when I try create Object Bottom in Simulation Process .  generate the report show the next message for
    Component View Connection
    Receiver Determination light yellow color  SRD_009 | PurchaseOrderRequest_out
    Analisys ; Requiered Communication Component | SRD_009
                    a receiver determination was found for connection
                    Reciever are missing in the receiver determination found
    Results ;  the reuse receiver determination is already assigned to the configuration scenario
                   the missing receivers were inserted into receiver determination found
                   added receiver communication component SRD_008
    Notes;      Check the conditions for all receivers of the receiver determination. the default result value for the generated condition
                    is TRUE:
    thanks.

    Hi,
    Please verify letter by letter if you haven't make a typo here:
    Default Interface Namespace -- http://mtf
    Default Interface Name -- mtf_mi1
    please also make a test of your scenario in integration directory
    please also do not use best efort quality of service
    /wg
    Message was edited by:
            Wojciech Gasiorowski

  • Configuring receiver determination with multiple messages in BPM

    I am configuring a BPM scenario which uses 3 abstract interfaces, one for receiving, 2 for sending. I need 2 abstract interfaces while sending because they use different message types. I have created a Receiver Determination for the 1st interface, but the problem is that when I try to create the second Receiver Determination the 2nd abstract interface is not listed after I select the Integration Process. Just the 1st interface is listed under the Integration Process. What might be the problem?

    Did you try to delete and reimport the BPM with the same name ?
    SKM

  • Problem in receiver rule of configured receivers in receiver determination

    Hi, Experts!
    Can anyone please help me with an issue regarding the receiver determination part of IB? I currently have 2 different receiver rules, each having a different condition but under the same communication component. When I check the message status in the runtime workbench however, both rules are considered and thus 2 messages are sent instead of just 1 from the selection. Please help me send the message according to the selected interface. Thanks!

    Hi Brent,
    You may write the rule as follows:
    if (Receiver='CHDB') OR (Receiver='CIF') then send the incoming message to the relevant Receiver Business Component/System.
    You may use the X Path editor for configuring this rule in the Content based Receiver Determination of your scenario.
    I hope this will help.
    Regards, Gaurav

Maybe you are looking for