Configuration between SAP PI and BPM in SAP PO
Dear Experts,
I am working on SAP PO 7.31 and want to carry out configuration between SAP PI and BPM in SAP PO. I carried the post installation
activities in NWA i.e. CTC.
Helplessly , I could not find any documents and notes to refer the configurations.
Regards
Rebecca
AAEx configuration:
Advanced Adapter Engine Extended (AEX) - Installation and Configuration - III
Configuring SAP BPM and PI runtime:
Configuring Message Processing from PI to BPM - Process Orchestration - SAP Library
Sample BPM
NetWeaver BPM for System-to-System Message Orchestration (Including Migration of ccBPM to NW BPM)
Hope this helps
Similar Messages
-
Differences between SOA Suite and BPM suite
Hi All,
Can any one tell us what are the differences between SOA Suite and BPM suite.
Thanks
parker.Please find the link below.
Difference B/W SOA Suite and BPM Suite
Hope it will help you.
Bibhu -
Configurations required for PME and SCE in SAP-CRM 2007
Hi Friends
How to configure the PME and SCE in SAP-CRM 2007.
If u have any documentation avilable for those two topics regading the implementation of e-Commerce application.
Waiting for ur reponse..
Regards
Satish.Hi Mia,
Authorization group is available in the old versions and basically this help in defining new authorization groups and you can define what can be done with these authorization groups as what can be edited and what cannot be and this is done on SPRO. These authorization groups are entered in the authorization group and the user who has this authorization object will be able to work on the account.
So the business role in CRM 2007 has a PFCG role and the authorization profile that you created are assigned to the business role and users are assigned to the business role.
There are also few authorization objects to maintian the BP relationship and see if you can use these combination to check if it meets your requirement.
Hope it clarifies and if useful please reward points
Thanks
Srini -
SSL Configuration between Web Dispatcher and Portal
Here is the scenario:
INTERNET -
https--> WEB DISPATCHER (decryipts)-https> PORTAL
When a request for portal page is sent to WEB DISPATCHER, it gives the following error in dev_webdisp:
[Thr 1087416640] ERROR in ssl3_get_server_certificate: (9/0x0009) the verification of the server's certificate chain failed
ERROR in af_verify_Certificates: (12851/0x3233) Verification of one certificate of path failed because the CA flag of its basic constraints is set to FALSE
ERROR in check_basicConstraints: (12851/0x3233) Verification of one certificate of path failed because the CA flag of its basic constraints is set to FALSE
I am using SAP's test certificates and there is no documentation for the error as far as I know.
Any ideas ?Hi Cristiano,
I solved the problem.
This error message is being caused by the mismatch between the issuer (SAP Test) and server pse generation strings (for example O and OU values ).
As the documentation suggests:
"For example, if you use the SAP CA, the naming convention is CN=<host_name>, OU=I<installation_number>-<company_name>, OU=SAP Web AS, O=SAP Trust Community, C=DE."
Thanks for the reply,
Best Wishes
Edited by: Yuksel Guney Hanedan on Aug 6, 2010 4:35 PM -
Upload PDF file from SAP Portal and save in SAP
A file in PDF format needs to be uploaded from SAP Portal and the file is to be saved in SAP. Request for help, how to do the same. What are the FM to be used etc..
Thanks,hi
Use FM GUI_UPLOAD with file type as BIN
there are similar threads...pls refer to them for more details:
https://www.sdn.sap.com/irj/sdn/profile?userid=3166533
Upload pdf file to SAP
PDF File
reward if helpful
regards,
madhu -
EtherChannel configuration between Copper interface and fiber Interface
Hi,
Need to check if Giga Etherchannel can be configured between Copper 10/100/1000BaseT and SFP 1000BaseT between two blades on a Cat 6506 with either Sup 720 or Sup32.I have configured etherchannel between two 3560G 48 port switches. Using a combination of 2 sx fiber and 2 1000tx copper interfaces. The resulting layer 2 channel supported upto 4gb. The notes from the cisco site indicate the following:
Configure all LAN ports in an EtherChannel to operate at the same speed and in the same duplex mode.
The following link refers to etherchannel for 6500 series switches:
http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007e6d3.html
This link refers to etherchannel for the 3560 series:
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00801cdea1.html -
Stream Configuration between different 11gr1 and 11gr2
I have oracle downstream set-up between two DBs both are 11gr1, i want to upgrade my my target DB to 11gr2. I want to ask whether my streams set-up would work after this or not.
OR
Is it possible have streaming between two version of oracle.
I shall be V thankful for you guidance.Hi,
Yes it possible to have streams configured between 2 different versions.
Anand -
SRM for customer with some SAP compenies and some non SAP companies
Hello Experts,
I am working on a tender to a customer. This customer wants to have SRM in 5 countries (own company codes).
This customer have SAP in 3 of these companies and some other accountings system in the two others.
Is it possible to set this up in one SRM client where you have 5 orgnanisational nodes under the the top node and each of these nodes are one company code?
And then you assing one backend system to each of these nodes. Classic Scenario for the nodes representing the companies that run SAP and Standalone for the others.
Plan is to set up MDM where all companies can shop from
Are there any pitfalls in a solution like this?
rgds
GARHi,
You need to define 5 organization nodes with SYS and ACS attributes.
Multi backend system configuration is supported in standard. It should not be a problem.
Regards,
Masa -
Mapping between communication channel and bpm
Hello,
is it possible to use a mapping before a message go into the bpm?
The szenario could be as follows:
- An E-Mail with plain text (meta data) comes in
- The meta data should be mapped, so we can use it for correlation
- The meta data go to the bpm
kind regards Thorstenis it possible to use a mapping before a message go into the bpm?
Yes. And it should be done as far as possible.
It can be used between
Sender -> BPM or
BPM -> Receiver
Regards,
Prateek -
SAP Roles and Access for SAP Implementation team members
Hi,
Is it correct practice to give SAP_ALL role access for all SAP Implementation team members in Dev and QA?
If not, what is the correct practice?
Kindly let me knowMadhu,
It is NOT correct practice to give anyone SAP_ALL in any of the systems; not DEV, not QAS, and certainly not PRD. However, many implementation teams (and particularly consultants from SIs) insist that they cannot possibly do their jobs without it. This is completely incorrect as there are specific roles for them to use for that purpose. The only circumstance where it could be justified is if you require a special "firefighter" role - and even then, I would still be a bit doubtful.
You should also consider that once you have given someone SAP_ALL, they will fight tooth and nail to keep it. It also means that they probably are not testing the user roles correctly. Most of those that insist they need it simply do not understand the security issues and probably don't care.
Just think; if they have access to do soemthing that they shouldn't and then cause a big problem, are they the ones that will have to fix it or are they going to expect you to do it? If they expect you to clear up after them, then you have the right to insist on restricting their access to cause issues in the first place.
But I know just how demanding they can be....
Best of luck
Tony -
We are migrating from one data center to another and want to keep 100% uptime during the process. The two data centers are on separate networks but in the same city. I want to migrate the Master and the Backup to the new data center with zero downtime.
Hi Harvey,
Tuxedo machines just need TCP/IP connectivity. So machines can be in different subnets, different Ethernets, etc. I know of one customer that has a 13 machine MP configuration that is distributed across the entire country. So as long as there is a route between the machines, you should be fine. Here's an old but probably useful white paper on bridges, multiple networks, etc., from Aurora Information Systems: "Exploring High Availability Issues with BEA Tuxedo and Third Party High Availability Software". While it's a pretty old white paper, from what I can see most of it is still applicable.
Regards,
Todd Little
Oracle Tuxedo Chief Architect
PS You should write some articles about what you've been up to and how you've accomplished it! -
Scenario for interface between a non sap system and a SAP erp
Hello,
I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
- At first regarding the interface from the non sap system and a SAP ERP :
the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database with a flag that means that the records have been sent to the SAP erp.
- Regarding the interface SAP erp to non SAP system:
the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
Is this scenario possible ?
Do we need any adaptator between the non sap system and the XI ?
Thank you for your help
ChristopheHi Bontron,
Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
Scenario1: Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
Scenrio2: Pickup form Database tables (Jdbc Adapter) -- xi -- RFC Adapter ---> This is synchronous call.
Regarding the interface SAP erp to non SAP system
You can send idoc to xi and from there use File adapter to send to the receiving system.
These blogs may help you to some extent:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario (your scenario will be opposite to this)
Regards,
---Satish -
Integration between SAP HR and PS (Project System)
Hi Guys,
Is there any integration between Project System and HR in SAP. My client is service oriented company.
Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
So is there any integration between PS & HR
Regards
PrasadHi Vikram Patil,
In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
If is there any documents on PS and HR integration please forward to my mail ID
[email protected]
Regards
Prasad -
Difference between sap xi and xMII
Hi all,
Can any body provide the information on SAP xMII and compare with SAP XI. Please help to find out scenario's based on the SAP XI and xMII.Hi Deviprasad,
Did your question get solved? If yes, then please close the thread.
If you have any query, then do ask.
Bye
Ankur
Do reward points for helpful as well as solved answers!! -
Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Starting with this new release, the application SAP Portfolio and Project Management 5.0
replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
Collaboration Projects (cProjects) application.
Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
of ramp-up is currently scheduled for 19th of October, 2010.
Functional Innovations And New Features
A detailed description of all new and/or enhanced functional innovations and features can
be found in the Release Notes:
[http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
-> SAP Solutions
-> Release Notes SAP Portfolio and Project Management
There are some SAP Notes which are in general very important for SAP Portfolio and Project
Management 5.0 and which also serve as central points of entry to find import information:
SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104] FAQs - SAP Portfolio and Project Management 5.0
SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912] PPM 5.0: Supported Browsers, Java versions, etc.
SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953] PPM 5.0: Configuration Content
SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778] SAP Portfolio and Project Management 5.0: Restrictions
Kind regards,
FlorianThanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.
Maybe you are looking for
-
Time Capsule Network Turned to Junk
I give up. This TC and new Expresses really are pieces of garbage. All of a sudden my TC WDS network has collapsed. While it will allow my PowerPC G5 to connect no problems with an nQuicky, it has suddenly started to either refuse connections from my
-
How to set the SOAP Header while publishing to Queue in the mediator
Hi, I am trying to publish the message to a JMS AQ, from the Mediator service in the 11g Soa Suite. I want to add some properties as SOAP Header to the message and send it to the JMS AQ. I have seen the mediator process calling BPEL process, passing
-
Was using my macbook as normal, then poof screen went black thought battery was dead but it is 65% also noticed on restarting I can faintly see my log in screen at the right angle. Any opinions as to what is wrong. Of course my apple protection plan
-
Enterprise service in Visual Composer
When i click on Search Task Panel toolbar and select service registry as the search criterion,I get a pop up stating... unable to receive classifications from UDDI registry,Please change UDDI server settings. Have ne one of u come across a similar si
-
I am having BDC upload problem . 2 transaction upload in one pgm.
Hi , I am having problems .In one BDC program that i have written. The data is plopulating the first tcode screens i.e of T Code KL01 but its not populating screen of TCode KP26. Please can you let me the reason why the screen of t code KP26 is no