Configuration BIW system in SAP ECC 5
Hi Expert
How to configure BIW system in SAP ECC 5 any notes for support configuration BIW system in SAP ECC 5
Regards,
Rahul
most of it is not a Basis jobs. you need to configure source systems in RSA1, this is directly linked to SM59.
for the rest, you might need to install Plug-ins, but the rest is the job of the BW functional.
Similar Messages
-
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy -
File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2
Hello,
We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
If anyone able to help me with required Solaris file system. it will be great help.
Please let me know if there is any query.
Thanks.> All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
> But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
> Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
So you'd need to read the installation guides
Markus -
External system calling SAP ECC enterprise service.
Hi Experts,
We have an external system(out of the client network) which needs to call the Enterprise service ExchangeRateByExchangeRateQueryResponse_In in ECC.
As we don't want to open the ECC port to the external systems we thought of using SAP PI in between.
I can develop a SOAP to SOAP scenario between External system and ECC using PI.
I want to check whether there is any better way of doing it without developing the interface.
Thanks in advance
Regards,
Rajesh.AHi Rajesh,
If the requirement is to fully decouple the ECC system from the external caller system, then configuration of mediated scenario utilizing PI would be a good solution here. But if it is only necessary to ensure that the external system doesn't have direct connectivity to application servers of ECC, then you may consider installing SAP Web Dispatcher, connecting ECC as a backend system to the installed Web Dispatcher and using Web Dispatcher as an endpoint in the caller system. In this way, the caller system doesn't need to have network access to application servers of ECC and will only communicate with Web Dispatcher, all communication between Web Dispatcher and backend (here, ECC) will be transparent for the caller system.
Regards,
Vadim -
File system for SAP Ecc 6.0 with db2 on AIX
Hello Everyone
Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
Thanksfind this
PRD
df -M
Filesystem Mounted on 512-blocks Free %Used Iused %Iused
/dev/hd4 / 4194304 2008384 53% 2438 2%
/dev/hd2 /usr 33554432 24364192 28% 48662 2%
/dev/hd9var /var 8388608 7880328 7% 580 1%
/dev/hd3 /tmp 8388608 8342704 1% 123 1%
/dev/fwdump /var/adm/ras/platform 262144 261448 1% 4 1%
/dev/hd1 /home 2097152 1928856 9% 131 1%
/proc /proc - - - - -
/dev/hd10opt /opt 4194304 2851592 33% 6285 2%
/dev/fslv12 /instcd1 41943040 9293200 78% 15850 2%
/dev/fslv00 /sapmnt/P11 10485760 8752544 17% 5955 1%
/dev/fslv01 /usr/sap/P11 10485760 8244400 22% 1319 1%
/dev/fslv02 /db2/db2p11 4194304 3100248 27% 3941 2%
/dev/fslv03 /db2/P11/log_dir 20971520 18346264 13% 26 1%
/dev/fslv04 /db2/P11/log_dir2 20971520 18346424 13% 26 1%
/dev/fslv05 /db2/P11/db2dump 4194304 3422024 19% 23 1%
/dev/fslv06 /db2/P11/sapdata1 272629760 220914312 19% 106 1%
/dev/fslv07 /db2/P11/sapdata2 272629760 220914000 19% 106 1%
/dev/fslv08 /db2/P11/sapdata3 272629760 220914304 19% 106 1%
/dev/fslv09 /db2/P11/sapdata4 272629760 220914280 19% 106 1%
/dev/fslv10 /db2/P11/saptemp1 10485760 10483352 1% 47 1%
/dev/fslv11 /db2/P11/mirrlog 20971520 20967456 1% 7 1%
/dev/fslv13 /db2/P11/archlog 94371840 46774984 51% 380 1%
/dev/fslv14 /sap/auditlog 12582912 12311392 3% 51 1%
*****rpd11:/usr/sap/trans /usr/sap/trans 33554432 11883968 65% 5738 -
External System Handling Units to SAP ECC System and Pack Outbound DO
Hi Guru
Packing Is done in External System for SAP ECC Sales Order Before Outbound Delivery Creation.
How to capture External System Handling Units in to SAP ECC System and Pack Outbound Delivery Line Items.
Please help
Thanks In Advance
SRBit of a cart-before-the-horse situation here.
Lets assume that your business process goes ahead and creates a delivery note, but leaves it unpicked and unpacked. Picking and packing will occur with the inbound IDoc from your external system.
Map the external system data into a basic IDoc type DELVRY0X. I think the current one is DELVRY07.
Use an inbound IDoc message type SHPCON to carry the external system data into your ECC system.
The process code DELV works well with DELVRY0X inbounds. It has lots of user exits. You will need them because you will need a determination process to know which delivery note to update with the external system data.
When you map the handling unit data correctly into the IDoc, the process code will create the handling units on your delivery. The external handling unit numbers should end up in VEKP- EXIDV.
Regards,
zKen -
Sender Port Error in SAP ECC for IDoc
Hi,
I am creating scenario IDOC -> XI -> JDBC with Customer Master IDoc.
After sending it with we19 he said "IDoc sent to SAP system or external program".
In we02 and we05 the IDOC it says "Data passed to port OK".
But in SM58, the IDoc ends in error saying
Transaction IDX1: Port SAPIDST100, client 600, RFC destination contains error.
What I identified that the port SAPIDST100 is the sender port in the IDoc being send. However, for PI we do not need to maintain sender port.
Business Systems:
Sender : SAP ECC
Receiver: SAPPID
Kindly provide your inputs.
Thanks
RahulHi Rahul,
thanks for the information that your scenario is working fine.
But i want to clarify some points:
- If you send out an IDoc from an ECC system, the senderport is filled with SAP+<system-id> by the SAP IDOC API,
i.e. if your system id is "ABC", the senderport is "SAPABC"
=> your senderport SAPIDST does not match this template, so i assume you entered the value for the senderport
manually in the idoc test utility WE19
- if you send out an idoc, only the receiver port must be created in transaction WE21, it is not necessary to create
the senderport in WE21, this is not necessary and did not solve your problem
- the idoc was send from ECC (application system with application IDoc metadata) to an XI/PI system (basis system
without application idoc metadata
The IDoc adapter on the pi system must analyze the IDoc segments and must know the idoc application metadata,
but this is not known. So the idoc adapter on PI side looks at the senderport to identify the sender.
In transaction IDX1 an rfc-destination can be configured to point to the sendersystem with that senderport
With this rfc-destination the IDoc adapter tries to read the idoc aplication metadata from the ECC system and stores it on PI side.
If there is no rfc-destination configured in transaction IDX1 on PI side you get the error mentioned in your request.
I assume that in transaction IDX1 somebody configured the correct RFC-Destination.
I hope this clarification helps you to understand the error and the solution.
Kind regards,
Andreas Dahl -
ESS - SAP ECC 6.0/EP7 - Personal Info/Control Record
Hi,
During configuration for ESS on SAP ECC 6.0/EP7 , I received an error for 'Control Record XX not found' when selecting the Address and Personal Data services under Personal Information area on the portal side. This occurred for one of our countries not on SAP Payroll. I created a control record for that country and the error went away.
Does anyone know why it is checking for a control record on version SAP ECC 6.0/EP7? We did not have this issue on SAP ECC5.0.
Regards,
BrianThanks Siddharth - applied the note and issue resolved.
Regards,
Brian -
SAP ECC 6.0 installed on Solaris Container
hello All,
we want install a production system of SAP ECC 6.0 on a solaris 10 container, the DB is oracle 10.
Have any recommendations, suggestion with this?
Thanks
Hernandohello
when we were installing the ECC on solaris 10 container the following error
ERROR 2009-08-26 22:14:46.730 [iaxxinscbk.cpp:260]
CJS-00091 Unable to create the tablespaces. DIAGNOSIS: There is not enough free disk space: Mount point | space required | space available | SAPDATA directories
/oracle/CMD/sapdata1 | 281050 | 54186.6 | 1
. SOLUTION: Make more disk space available.
ERROR 2009-08-26 22:14:46.735
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall:
/oracle/CMD/sapdata1 | 281050 | 54186.6 | 1
ERROR 2009-08-26 22:14:46.932 [sixxcstepexecute.cpp:951]
FCO-00011 The step checkFreeDiskSpace with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraTablespace2|ind|ind|ind|ind|6|0|checkFreeDiskSpace was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall:
/oracle/CMD/sapdata1 | 281050 | 54186.6 | 1
How we can fix this error?
thanks
Hernando -
Error while registering SAP ECC system in UWL systems
hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '132.147.0.112:sapgw00' not reached
TIME Thu Nov 27 16:12:05 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER 2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi. -
SAP ECC 6.0 System Performance
Gentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is: SAP ECC 6.0
Database System: Oracle 10.2.0.2.0.
Server Configuration: Power 6
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6
Processor Version: PV_6_Compat
Number Of Processors: 6
Processor Clock Speed: 3503 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 2 PRODUCTION
Memory Size: 47104 MB
Good Memory Size: 47104 MB
Platform Firmware level: EL340_039
Firmware Version: IBM,EL340_039
The following Information was generated from TCode: sm51:
SAP Release Information
Application Server SAPPRD_PRD_00
SAP Kernel Information
SAP Kernel : 700_REL
Database Client Library : OCI_101
created in : AIX 2 5 005DD9CD4C00
Support Level : 0
Kernel Patch number : 202
Source ID : 0.202
DBSL Patch No. : 046
ICU Version : 3.0 Unicode Version 4.0.1
libsapu16 Version : 1.0025 Apr 8 2009 16:21:08
Supported Environment
SAP Database Version
700
Database
ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating System
aix 1 5
aix 2 5
aix 3 5
aix 1 6
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/gui_auto_logout 0
login/password_expiration_time 0
rdisp/max_wprun_time 25000
login/multi_login_users CICUSER,TALSAYED,ASALAM
login/disable_multi_gui_login 1
SAPSYSTEMNAME PRD
SAPSYSTEM 0
INSTANCE_NAME DVEBMGS00
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposcol $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
DIR_ROLL /usr/sap/PRD/DVEBMGS00/data
DIR_PAGING /usr/sap/PRD/DVEBMGS00/data
DIR_DATA /usr/sap/PRD/DVEBMGS00/data
DIR_REORG /usr/sap/PRD/DVEBMGS00/data
DIR_TRANS /usr/sap/trans
DIR_TEMP /tmp
DIR_SORTTMP /usr/sap/PRD/DVEBMGS00/data
zcsa/system_language E
zcsa/installed_languages AE
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
login/no_automatic_user_sapstar 0
login/system_client 100
icm/server_port_1 PROT=SMTP,PORT=8025,TIMEOUT=180
rdisp/start_icman TRUE
icm/host_name_full SAPPRD.tmg.dom
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
1. Performance Overview PRD
The performance of your system was analyzed with respect to average response times and total workload. We have detected some problems that may impair system performance.
To ensure adequate performance in your core business transactions, you should take corrective action as soon as possible. For further information, please SAP Support.
Rating Check
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Steps Avg. Resp. Time in ms Avg. CPU Time in ms Avg. Wait Time in ms Avg. Load Time in ms Avg. DB Time in ms Avg. GUI Time in ms
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Users Low Activity Medium Activity High Activity Total Users
Measured in System 162 119 6 287
1.2. Performance Evaluation
The measured times are compared against reference times to provide a rating.
- If the number of dialog steps in an hour is less than 1000 this hour is not considered.
- If the total number of transaction steps is less than 24000, the rating for the task is not performed and a blue line is entered in the table.
The table below shows that a performance problem is expected for the task that is rated YELLOW.
Task Steps Application Server Performance Database Server Performance
Dia 212987
Upd 86257
HTTP 0
Rating Task Time Steps Avg. Response Time (ms) Avg. CPU Time (ms) Avg. Database Time (ms)
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
The ratings in the table above are determined by comparisons against the reference table below.
If the dialog response times are very poor, it will cause a RED rating for the entire check.
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
1.3. Transaction Profile Check
The following tables show the response times and the number of dialog steps for the transactions that cause the highest workload in your system. NOTE: A business transaction normally consists of more than one dialog step. As a rough estimate, the actual number of business transactions that are executed in your system is approximately one third of the total dialog steps shown. (Transaction CPIC/RFC is not taken into account.)
1.3.1. Transactions by Total Workload
The following tables list the activities with the highest contribution to the total workload.
WORKLOAD BY TRANSACTION (DIALOG/UPDATE)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms Avg. GUI Time in ms
Total 299247 100.0 1168.9 191.7 459.6 136.8
ZFIBB DIA 8592 11.1 4522.4 2258.5 633.4 30.1
ZFIRP DIA 6641 7.3 3858.0 1089.7 1162.6 50.0
RECN DIA 11644 6.8 2047.9 129.1 1165.8 202.6
SESSION_MANAGER DIA 8972 5.7 2226.9 80.2 244.2 458.2
ZFICCR DIA 4834 5.2 3775.9 138.4 2535.9 195.6
ZRECPD DIA 8895 4.6 1790.1 85.9 525.3 329.4
FBL3N DIA 10414 4.1 1386.7 109.3 971.8 49.1
ZFIOBC2 DIA 852 3.4 13909.2 2675.7 9302.3 1028.7
ZREOR DIA 2241 3.3 5216.1 2246.2 808.1 357.5
ZFIOB DIA 1176 3.2 9503.7 51.3 8287.0 753.4
38.1% of the "Total Resp. Time" in the above table is caused by customer transactions.
WORKLOAD BY TRANSACTION (BATCH/SPOOL)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms
Total 21492 100.0 102913.8 24939.7 71399.3
SBIE0001 BTC 36 98.7 60613763.4 14848709.4 42408448.0
ZFIPR SPO 448 0.2 7939.6 169.9 387.1
(BATCH) BTC 7368 0.2 478.4 7.5 22.2
ZFIADCA SPO 486 0.1 5733.7 168.6 177.9
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 23895.0 1964.7 21770.3
ZFIJV SPO 309 0.1 6092.5 107.7 89.5
SAPRSLOG BTC 4 0.1 318475.8 69165.0 257824.5
ZRE_GENERATE_COND_RO BTC 5 0.1 250075.0 3336.0 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 57062.0 339.0 54977.8
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.0 3161.3 941.6 2327.7
0.6% of the "Total Resp. Time" in the above table is caused by customer transactions.
According to our analysis, the main system load is caused by background jobs.
The EarlyWatch Alert Service can only detect performance problems for dialog, update and RFC response times. This service does not evaluate performance problems for background jobs.
1.3.2. Transactions by DB Load
The following transaction profiles list the transactions that have the greatest share in the database load, sorted by percentage of total database access times.
DATABASE LOAD BY TRANSACTIONS (DIALOG/UPDATE)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 299247 100.0 459.6
RECN DIA 11644 9.9 1165.8
ZFICCR DIA 4834 8.9 2535.9
FBL3N DIA 10414 7.4 971.8
ZFIOB DIA 1176 7.1 8287.0
ZRECCR DIA 1504 7.0 6368.3
ZFIOBC2 DIA 852 5.8 9302.3
ZFIRP DIA 6641 5.6 1162.6
ZFIBB DIA 8592 4.0 633.4
ZFIREMTCH DIA 73 3.5 66443.6
ZRECPD DIA 8895 3.4 525.3
45.3% of the "Total DB Time" in the above table is caused by customer transactions.
DATABASE LOAD BY TRANSACTIONS (BATCH/SPOOL)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 21492 100.0 71399.3
SBIE0001 BTC 36 99.5 42408448.0
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 21770.3
ZRE_GENERATE_COND_RO BTC 5 0.1 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 54977.8
SAPRSLOG BTC 4 0.1 257824.5
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.1 2327.7
RSPO1043 BTC 4 0.0 143273.5
ZFIPR SPO 448 0.0 387.1
(BATCH) BTC 7368 0.0 22.2
ZFIADCA SPO 486 0.0 177.9
0.3% of the "Total DB Time" in the above table is caused by customer transactions.
Please advice.
Regards,
AhmedGentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is:
SAP ECC 6.0 , Oracle 10.2.0.2.0 , Kernel Patch number : 202 , DBSL Patch No. : 046
Server Configuration:
Power 6 , Processor Type: PowerPC_POWER6 , Processor Implementation Mode: POWER 6 , Processor Version: PV_6_Compat , Number Of Processors: 6 , Processor Clock Speed: 3503 MHz , CPU Type: 64-bit , Kernel Type: 64-bit , LPAR Info: 2 PRODUCTION , Memory Size: 47104 MB , Good Memory Size: 47104 MB , Platform Firmware level: EL340_039 , Firmware Version: IBM,EL340_039
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/max_wprun_time 25000
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposco $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Avg. Resp. Avg. CPU Avg. Wait Avg. Load Avg. DB Avg. GUI
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Low Activity Medium Activity High Activity Total Users
162 119 6 287
1.2. Performance Evaluation
Task Time Steps Avg. Response Avg. CPU Avg. Database
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
Please advice.
Regards,
Ahmed -
SAP GRC 10 - PSS Access from SAP ECC System
I have configured Password Self Service in GRC System and is working perfectly fine for all password resets if access provided to NWBC from GRC System.
We have requirement to provide end users to reset password using SAP ECC System only. I have tried to access NWBC using SAP ECC System but is giving me error that Menu not configured or roles not assigned.
Currently Maintain Data Sources is configured as below
User Search Data Sources , User Detail Data Sources & User Authentication Data Sources set to ECC Connector and End User Vertification Set to yes.We are not using LDAP / Active Directory for the User Search Database and instead ECC Only
Can anyone provide the roles to be assigned in SAP ECC System to access NWBC - Password Reset .Hi Anil,
In support to Colleen's comments, It seems that you have not configured the USER on the End User Services. You need to make sure that the guest user (not available in GRC) is configured in each of the 10 services in SICF for the end user Login Pages to work.
Here are the 10 required services to be activated:
1.)GRAC_OIF_MY_PROFILE_EU
2.)GRAC_GAF_NAME_CHANGE_SERV_EU
3.)GRAC_POWL_REQUEST_STATUS_EU
4.)GRAC_GAF_PWD_SELFSERVICE_EU
5.)GRAC_OIF_USER_REGISTER_EU
6.)GRAC_GAF_ACCREQ_WITH_REQREF_EU
7.)GRAC_OIF_REQUEST_SUBMISSION_EU
8.)GRAC_GAF_ACCREQ_WITH_TEMPL_EU
9.)GRAC_GAF_ACCREQ_WITH_USEREF_EU
10.)GRAC_UIBB_END_USER_LOGIN
You can refer note#http://service.sap.com/sap/support/notes/1628387
If the user is not present in GRC system then, they have to go with end-user-logon page to reset their passwords where you can always define the user authentication configurations.
Regards,
Ameet
Message was edited by: Ameet kumar -
SAP R/3 System analysis before upgrade 4.6C -- SAP ECC 6.0
Hello!
Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
The following functions should be included in this program:
- detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
- comparison against a SAP ERP 6.0 reference system
- extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
- syntax analysis of program code with respect of adjustement need
- quality control of own development
- control of amount of transports within different company areas
- control of user information, such a user type, logon date, etc.
- basic control, whether a sufficient authorization concept is available
- Identification of objects that should be considered for the archiving in oder to decrease the db-size
My question are:
- which tasks can be convered with SAP standard transactions what are the names of the transactions?
- which effort do I investigate for these tasks?
Thank you very much!
regardsDear Thom,
To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes and http://service.sap.com/upgrade for functional changes.
Need to consider the following things:
For Reports its custom developed program so unless there is any kind of change in requirement from the client regarding the layout nothing needs to be changed I think it will work fine in ECC 6.0 to except few things may needs to be changed..so you need to discuss whether they want the reorts as it is right now or want to change the layout (adding some new info/fields etc) of any report so u need to modify the program for those and estimate accordingly for a medium complexitys Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing) so to modify it will be less than that (depending upon the scope of changes)
Now say for Batch Inputs(interface/Data Migration) using BDC you need to see how many BDCs are there again if the field lengths and layouts are not changing then no need to change anything (except the main thing ..you need to change the obsolete function modules there are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0 there are some new with enhanced functionality so you need to modify the BDCs and many cases it happens that the whole transaction screen changes for process in that case better to develop new BDCs so you have to consider those parameter look into and estimate accordingly modifying a BDC should not take more than 1 PD
Now say for Forms there was no Smart form in 4.6C form printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart form in that case its complete new dev so estimate accordingly a medium complexitys form should take 8 PD (FRSTDSCoding+Unit Testing) you can take it as 10 PD too even if client wants to keep it is as it was in older version you have to redevelop the layout in ECC 6.0 again as form printer is even client dependent maximum you can copy the program associated with that form in the new version too and your effort will be saved again you have to consider if clients wants to change the layout too
Now for enhancement so in that case u need to see individual cases for a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)
One more important thing is that the Unicode Compatibility this needs to be done .needs to change the code (variable name) accordingly .also Version management tool is used for the standard programs
Also pls find the following forums:
Re: Data Migration from 4.6C to ECC 6.0
List of transations supported in SAP 4.6c and not in ECC6.0
Re: Upgradation from 4.6C to ECC 6.0
Re: what's the advantage to upgrade 4.6c to ECC5.0...
RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
Upgrade batch inputs from 4.6C to mySAP ERP 2005
/thread/317225 [original link is broken]
Upgrade from SAP R/3 to ECC 6.0
Hope it will help you.
Thanks,
Atin
<b><b>Reward points if it helps.</b></b> -
Loading of transaction data from SAP ECC system failed
Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
HolgerHi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much! -
Required infrastructure to enable web service calls in SAP ECC 6.0 system
Hi Friends,
I'm working on XI, more on part of webservices and as I dont have a good knowledge on BASIS part, I would like to know the steps required to enable the webservice calls in SAP ECC 6.0.
Blogs/documents could be helpful.
Thanks in advance.You will have to create a receiver communication channel of type RFC adapter to connect to your ECC from XI .
u will have to enter the details of your ECC box like
application Server
system number
in the communication channel.
You will also have to create a user in the ECC which you will use in the RFC communication channel to connect.
YOu will also have to create Business System in your SLD corressponding to the ECC .
Maybe you are looking for
-
OBIEE11 Can not connect to VM server after install sucessefully
Hi All: Another question about OBIEE 11. For now, I have installed OBIEE11 sucessefully at customer's server (which is a VM) and it run normally. But I can't access it via my own computer using the same HTTP address. Is there any possibility for this
-
Apple TV can not sign in to itunes
everything else is set up however when i sign in with my apple ID it says either login or password is incorrect when i just downloaded a song on itunes with the exact same info
-
Handling large messages with MQ JMS sender adapter
Hi. Im having trouble handling large messages with a MQ JMS sender adapter. The messages are around 35-40MB. Are there any settings I can ajust to make the communication channel work? Error message is: A channel error occurred. The detailed error (if
-
Reset your security questions and answers
i canot remember my answers. and i need reset my security questions and answers
-
Apple announced support for iWeb publishing until June 30th. I am no longer permitted to publish changes to my site. Is there any way around this until I transfer the site to a new webhosting service?