Configuration Change log in Production

Hi all
    Some configuration changes have been directly made in production at our client. How can we find out what changes are made? Going into SCC4 > Change logs, I could find out who made all the changes. But it does not show what configuration changes are made.
Thanks
Vamsi

Dear Vamsi,
I'm not sure whether in a single report you can fetch all the changes related to configuration for a particular module.
But I'm sure in most of the nodes the configuration change logs gets recorded.Check these links,
Re: How to find when a new Material type is created
Configuration change Log
Regards
Mangalraj.S

Similar Messages

  • Configuration change Log

    Hi,
      I need to find the configuration change log in development system. Do we have any transaction/report/program from which we can track all the configuration changes for a perticular object.
    Thanks,
    Vijay

    for almost all customizing you can find the change history in menu tools within the cuistomizing.

  • Configuration change logs with EEM

    Hi,
    I am trying to log all commands executed on the Cisco Router. And it is working fine. However it wont show who executed the commands. It just shows command was executed
    *Nov 15 00:38:56.356: %HA_EM-6-LOG: cli-match: configure terminal  Command Executed
    *Nov 15 00:39:08.060: %HA_EM-6-LOG: cli-match: do-exec sh ip int brief Command Executed
    *Nov 15 00:39:08.066: %HA_EM-6-LOG: cli-match: show ip interface brief  Command Executed
    PE4(config)#    
    *Nov 15 00:39:12.940: %HA_EM-6-LOG: cli-match: do-exec sh logg Command Executed
    *Nov 15 00:39:12.945: %HA_EM-6-LOG: cli-match: show logging  Command Executed
    I know i can setup using config archive logging for the config change. but my requirement is for show command as well. We use radius for authentication and it is not doing command authorisation and accounting..
    If any one know what I can append in so that it can show who executed the command.
    thanks
    Aijaz

    The CLI command I'm trying to run is "copy runnning-config tftp", but I don't know how to pass variable on the ASA. I know some Cisco IOS you can create environment variable for the EEM to use. The command I'm trying to run requires user input such as: the source file, destination tftp client and the destination file. How to pass that? Or maybe what command can I run to save the config to a remote server?
    thanks,

  • Configuration Changes logging issue, ASDM related?

    I've run into an interesting problem.
    ASA: 8.4(2)
    ASDM: 6.4(5)
    When I make a change at the CLI, syslog message ASA-5-111008 is generated and sent to the syslog servers, local buffer, and ASDM.
    When I make a change in ASDM, syslog message ASA-5-111008 is  generated and sent to the local  buffer and ASDM. It is NOT sent to the syslog server.
    Here's my logging config...
    Firewall# sh run logging
    logging enable
    logging timestamp
    logging standby
    logging buffer-size 409600
    logging buffered informational
    logging trap notifications
    logging asdm notifications
    logging host Inside xx.xx.xx.AA 6/1468
    logging host Inside xx.xx.xx.BB 6/1468
    logging flash-minimum-free 10240
    logging flash-maximum-allocation 10240
    logging permit-hostdown
    Surely I'm missing something obvious.  Is this a known bug?
    Thanks!

    Ha, I did upgrade just a few minutes ago, but same result.
    That does look similar, and so does ...
    CSCth14248 ASA not sending all logging messages via TCP logging
    Looks like I'll need to upgrade to 8.4(3) to fix these and see how it goes.
    thanks!

  • Change Log for Production Order

    Hello Gurus,
    I have a requirement where the production order scheduled finish date should not be changed in the BW reporting though it changes in the R/3.
    For the same. I need to know if there is any way i can get to know if there were any changes to the scheduled finish date (GLTRS). I checked the CDPOS and CDHDR, but did not find any entries for these changes..
    Please let me know if you have any details on where the change documents history would be maintained.
    Best Regards
    Avinash

    Please check the Order and Click on the Status, then go to extras and check the change documents for all.
    this will display all the changes against the order, with dates and user names.
    From this try to get the report developed.
    Or get the status of Order status from JEST table.
    Hope this helps you.

  • How to find workcenter and production order change log

    Hi,
    I am new to PP function.
    Due to problem tracking, I want to know where to find the change logs for
    1.Work Center
    2.Production Order
    Many thanks!
    Steven

    Hello Steven,
    to view change log for production order:
    1. you can go to CO03 at the header functions choose GOTO --- CHANGE MANAGEMENT (here you can see if in the order there where Change process been done to the order)
    2. Also in CO03 at the header functions choose HEADER --- STATUS CHANGES (with this you can track the user, system status changes, the action done, date, time, user,transaction happen on the production order.
    to view change log for work center:
    1. go to CR03 choose EXTRAS --- ADMINISTRATIVE DATA (here you can track the date and who made the changes ans status of the work center)
    2. you can also check table CRHD which you can see detailed of the work center you wish to see.
    Thanks

  • Firefighter Config change logs / SOD logs are  not displayed..

    We are on GRC 5.3, SP8. I have configured the SUP and firefighter id's are working fine. However, I am getting the message " No match nor conflict found " when I execute the 'Configuration Change Log report' and 'SOD Violations Report' even though the we changed the configuration and FF id's executed conflicting transactions defined in RAR. ' Log data changes ' box is already activated in the following tables:
    1. Configuration (/VIRSA/ZFFCONFIG)
    2. Controllers (/VIRSA/ZFFCNTRL)
    3. Critical Tcodes (/VIRSA/ZVIRTCODE)
    4. Firefighters (/VIRSA/ZFFUSERS)
    5. Owners (/VIRSA/ZVIRFFIDS)
    6. Reason Codes (/VIRSA/ZFFRCD)
    7. Security (/VIRSA/ZVIRFFPWD)
    Still the logs are not displayed.  Thanks for your help.
    Regards,
    Raj

    Hi Raj,
    Can you check the SM37 background job../VIRSA/ZVFATBAK is running or NOT???
    Regards'
    Gangadhar

  • Is there any way to download/print/export the CUP Change Log?

    Does anyone know if there is a way to export, download, print, etc. the CUP Change Log report?  We are on GRC 5.3 SP13.
    We have just started an audit review and the Auditors are asking for a report of all changes made since 10/1/2010.  I can generate it on the Configuration/Change Log/Search Change Log screen but it doesn't seem to have any export/print options.
    If this is not possible, does anyone know what tables make up the Change Log?  I may be able to give them a report off of the tables.
    Thanks.

    Hi Bob,
    by default there is no export feature for that one.
    To find the right table I only see that you would need to query the tables for one of the entries to find the right one as there is no official DB structure published.
    Best,
    Frank

  • Logging CRS configuration changes

    Hallo,
    in a 10.1 RAC environment,
    is there a file which logs CRS configuration changes, like issuing a oifcfg -setif command?
    Thx

    Yes

  • Production Orders Changes Log

    Hello,
    I would like to know if there is any Standard way in SAP to be able to see the modifications for a production order. I would like to see modifications in quantities or components.
    Does anybody knows if it is possible to retrieve that information in a standard way?
    Thanks

    Dear
    Changes in Production Order can be  traced through following ways :
    1.Order Change Management :
    Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
    Create a Change Number CC01 with Release Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
    Then go to Oder Change Process T Code :- COCM
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on Procurement element icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Use COCM1 to find out the details or CO03--Extra --change
    Please check link  : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
    2.To  get the changes in Production Order apply SAP Note 390635.
    3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
    Regards
    JH
    Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

  • Log configuration changes to syslog on Nexus 7000?

    I need to be able to log any configuration changes to syslog on our Nexus switches. On IOS this is easy with the archive commands, but I'm a little stuck trying to do this on our Nexus gear. On the IOS gear I run the commands:
    archive
    log config
    logging enable
    logging size 100
    hidekeys
    notify syslog
    How do I do the equivalent on NX-OS?

    ​Cisco NX-OS can log configuration change events along with the individual changes when AAA command accounting is enabled.
    With command accounting enabled, all CLI commands entered, including configuration commands, are logged to the configured AAA server. Using this information, a forensic trail for configuration change events along with the individual commands entered for those changes can be recorded and reviewed.
    Because of this capability, it is strongly advised that AAA command accounting be enabled and configured.
    Refer to the “TACACS+ Command Accounting” section of this document for more information.
    The Nexus 7000, by default keeps a local accounting log of all the configuration commands entered on the device; you can view this with the 'show accounting log' command.
    In NX-OS, we changed the way logging works.  We keep a local accounting log of all the
    configuration changes ("show accounting log"), but if you want to send those logs to a
    server, it must be done with through a TACACS server.  Please see the below documentation:
    Configuring AAA on Nexus
    TACACS command accounting
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them.**

  • Can the ACE be configured for logging configuration changes to syslog server ?

    Hi,
    On all our routers, switches and firewalls we've configured syslog so we get logs when configuration changes occur.
    Is this possible on the ACE too ?
    regards,
    Sebastian  

    Hi Sebastian,
    Yes it is possible but depends upong the logging level you have set. So logging trap 5 should be able to get you the configuration changes or command execution logs.
    Nov  1 2013 11:20:33 : %ACE-5-111008: User 'admin' executed the 'logging buffered 6' command.
    Nov  1 2013 11:20:48 : %ACE-5-111008: User 'admin' executed the 'no rserver testlog' command.
    So you should see these level 5 logs on syslog if logging trap 5 is configured.
    Let me know if you have any questions.
    Regards,
    Kanwal

  • Configure the Change Log for the activity

    Hi to all,
    I would like to know if it is possible to configure the "change log" for the activity.
    Thanks in advanced,
    Matte

    Carlos,
    Can you be more specific on the term 'Configure'.  Change log is automatically generated by SBO.  The only thing you can change is the numbers of Historical instances of the log
    Administration > System Initialization > General Settings.......Services Tab...History or Log Settings.  Be default it is 99 instances.
    Suda

  • [svn:bz-trunk] 10057: Update the sample configuration to include a comment to warn people not to use debug level logging in production .

    Revision: 10057
    Author:   [email protected]
    Date:     2009-09-08 10:58:36 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Update the sample configuration to include a comment to warn people not to use debug level logging in production.
    Modified Paths:
        blazeds/trunk/resources/config/services-config.xml

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Vendor Classification Change Log Activate : Configuration Change

    Hi,
    I want to know what is the process of activate Change Log for the Vendor Classification. Please suggest.
    Rgds

    You can see in Xk02 / Xk03 transaction - Environment tab - Field changes..

Maybe you are looking for