Configuration changes for transactin CK94 in SPRO

How to make changes in the SPRO so that in the transaction CK94, I can get Page up and Page Down functionality activated. I need this for BDC purpose refer to my earlier posting https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://BDC: How to enter data in Table control (With wizard) using scrolling?.
Thanks for your help.
Ashish

KK
Hi i hope before you run PT60 you have copied schema TM04 to you customised one and in IT 0007 hope its 9 and permite quota generation without TE is in INCREASE .
If So then in IT 2013 select the Leave type and give the end date of the year and change the number it will work.
I hope you have to write a PCR for carryforward as per my knowledge.
However wait for expert ans
Thanks
Vibin

Similar Messages

Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?

This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage?

UME Configuration change for j_user attribute

Hi All,
We have a requirement in portal like users login into the portal with the windows ID(Which is loginuid in the LDAP)(loginuid is synchronized with windows ID) and the further authorizations should happen with the field called uid.
We made change in the UME datasourse xml file as below.
In the attribute mapping ,
<attribute name="j_user"><physicalAttribute name="loginuid"/>
and
<attribute name="uniquename"><physicalAttribute name="uid"/>
After making this changes user couldnt login with the loginuid..
We are getting the following error in the trace file:
===========================================
[]#2#ume.configuration.active#true#
#1.5#000C299E546D002A0000000100000464000423C9E09FC94C#1165249872673#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D002A0000000200000464000423C9E09FCB79#1165249872673#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###Received no SAPLogonTicket. Authentication stack: [].#1#ticket#
#1.5#000C299E546D002A0000000300000464000423C9E09FCCB0#1165249872673#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.DataBasePersistence][md=doSearch][cl=19919]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###Perform query: SELECT DISTINCT PID FROM UME_STRINGS WHERE ((PID LIKE ? ESCAPE '\#') AND (((NAMESP=?) AND (NAMESPH=?) AND (ATTR=?) AND (ATTRH=?) AND (UPPERVAL = ?) AND (UPPERVALH = ?))))#
#1.5#000C299E546D002A0000000400000464000423C9E09FE037#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###entry for search with searchfilter (&(objectclass=inetorgperson)(loginuid=user1)) searched in cache#
#1.5#000C299E546D002A0000000500000464000423C9E09FE07B#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###search result found in cache#
#1.5#000C299E546D002A0000000600000464000423C9E09FE07E#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###found principals: no results found#
#1.5#000C299E546D002A0000000700000464000423C9E09FE3FD#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.DataBasePersistence][md=doSearch][cl=19919]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###Perform query: SELECT DISTINCT PID FROM UME_STRINGS WHERE ((PID LIKE ? ESCAPE '\#') AND (((NAMESP=?) AND (NAMESPH=?) AND (ATTR=?) AND (ATTRH=?) AND (UPPERVAL = ?) AND (UPPERVALH = ?))))#
#1.5#000C299E546D002A0000000800000464000423C9E09FF19E#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###entry for search with searchfilter (&(objectclass=inetorgperson)(loginuid=user1)) searched in cache#
#1.5#000C299E546D002A0000000900000464000423C9E09FF1DE#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###search result found in cache#
#1.5#000C299E546D002A0000000A00000464000423C9E09FF217#1165249872688#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.LDAPPersistence][md=searchPrincipalDatabag][cl=20149]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###found principals: no results found#
#1.5#000C299E546D002A0000000B00000464000423C9E0A03B38#1165249872704#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=initBeans][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###LanguagesBean created#
#1.5#000C299E546D002A0000000C00000464000423C9E0A03CE4#1165249872704#com.sap.security.core.util#sap.com/irj#com.sap.security.core.util.[cf=com.sap.security.core.util.ErrorBean][md=ErrorBean(Message)][cl=15715]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Java###message USER_AUTH_FAILED#1#message USER_AUTH_FAILED#
#1.5#000C299E546D002A0000000D00000464000423C9E0A03DB3#1165249872704#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.sapmimp.logon.SAPMLogonLogic][md=executeRequest][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_35##0#0#Info##Plain###No command found, forwarding to umLogonPage#
#1.5#000C299E546D00270000001100000464000423C9E0B8A4B3#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D00270000001200000464000423C9E0B8A7ED#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###got []: []#2#ume.configuration.active#true#
#1.5#000C299E546D00270000001300000464000423C9E0B8A89E#1165249874314#com.sap.security.core.server.jaas#sap.com/irj#com.sap.security.core.server.jaas#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Info##Java###Received no SAPLogonTicket. Authentication stack: [].#1#ticket#
#1.5#000C299E546D00270000001400000464000423C9E0B8B6D3#1165249874314#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.logon.imp.SAPJ2EEAuthenticator][md=getLoggedInUser][cl=20245]#j2ee_guest#192#####SAPEngine_Application_Thread[impl:3]_4##0#0#Warning##Java###null
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: Authentication did not succeed.
Regards,
Birla.

Hi ,
you need to change uniqename too.
<attribute name="uniquename">
<physicalAttribute name="loginuid"/>
change it and test on configutool before activate & restart .
Thanks
Tag

Configuration change Log

Hi,
I need to find the configuration change log in development system. Do we have any transaction/report/program from which we can track all the configuration changes for a perticular object.
Thanks,
Vijay

for almost all customizing you can find the change history in menu tools within the cuistomizing.

Configuration settings for Contract account create\change\display transacti

Hello all,
Does any one know IMG path for settings for contract account related activities (Tcode - caa1\caa2\caa3). We have 2 systems of SAP ISU. One system shows various fields blocks under 'General data' tab like 'Account management data', 'contract account remarks', 'invoicing', 'associated work activity' while other system only shows 'Account management data' and 'associated work activity' that too with very less no of fields in there.
Is it because of any functional settings through IMG or is there any other reason?
Regards,
Abhi

Hi ,
In IMG there is a setting where in you can make settings for the fields of activities like contract account create , change , display .
Following is the navigation for the same .
SPRO - Financial accounting ( new ) - Contract accounts receivable and payable - basic functions - contract accounts - field modifications - configure field attributes per activity .
Here you can make the necessay settings for your activities as to you want to make the field as hide , display , mandatory etc.
Secondly , in case of authorizations - System checks for following Auhtorization objects ;
F_KKVK_BUK - For co code .
F_KKVK_VKT - Contract account type .
F_KKVK_BEG - Aurhoization group in contract account .
E_REGIOGRP - Regional structure group .
do revert back in case of anyother issues .
Regards ,
Dewang T.

I have Photoshop CS purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate". Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer l

I have Photoshop CS, purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate. Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer literate, so don't understand what that means. LOVE the CS program and know how to use it, so don't want to have to learn something new. Don't know what to do. Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS. CAN SOMEONE PLEASE HELP!!!

jd49034389 wrote:
down further there is a Photoshop CS2, do I just do that one?
Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
Good luck.
--OB

A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.

I receive the following alert from Windows Azure; Any clue what does this mean?
Time: 3/26/2014 7:37:33 PM
TITLE : compute : Advisory
SUBSCRIPTION ID: Not Available
DESCRIPTION: A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.

This issue correlates with an issue you might see at the Windows Azure Service Dashboard:http://www.windowsazure.com/en-us/support/service-dashboard/
See below a paste from that page from the period of your alert. Friendly Azure is piping you courtesy notification vai your event log!
Compute : Advisory [East US, North Central US, South Central US, West US]
26 Mar 2014 1:29 AM UTC
A alert for compute is being investigated. Configuration changes to Virtual Machines (IaaS), such as adding or removing a disk or an endpoint may cause reboots.
John Joyner MVP-SC-CDM

Watch configuration files for changes

I changed web.xml to get charting to work and it did (but it worked without restarting CF)
I do not have the Watch configuration files for changes option checked in cfAdmin.
I went to make the same changes on other boxs and CF "undeployed" itself.
I am running CF8 on Solaris. I recently upgraded the JVM to 1.6_10

See
http://www.stillnetstudios.com/2008/03/04/getting-cfstat-to-work.

Accounting Command for Configuration Changes

Hi All,
i want the logs of command 0r configuration changes made in ROuters or Switches to ACS 4.1,
like the following
Wed Jun 27 03:46:47 2001 172.16.25.15 fgeorge tty3 5622329430/4327528 stop
task_id=3 service=shell priv-lvl=1 cmd=show version <cr>
the above is found in the Command Accounting of the Link
http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfacct.html#wp1000976

Anand
The information that you need about how to configure this is not so good in the link that you posted. But it is not difficult to configure. I use the following line in configuration of routers and get the accounting records in ACS for all privilege level commands including any configuration commands.
aaa accounting commands 15 default start-stop group tacacs+
You might want to change some details (like tacacs+) depending on how your routers are configured to talk to ACS.
HTH
Rick

ASA send syslog messages for configuration changes

On a router you can send configuration changes to the syslog server by doing,
conf t
archive
log config
logging enable
notify syslog
Then the router will send something like,
.Aug 3 13:12:00.776 PACIFIC: %PARSER-5-CFGLOG_LOGGEDCMD: User:admin logged command:no interface Loopback76
if I had typed at the command line, "no int lo76"
How do you do this on the ASA?
Goal: I want to know when anybody does any kind of config on my ASA.

The syslog number 111008 and 111010 will log the command that is entered by user.
111010 is for configuration changes.
Here is the syslog for your information:
111008:
http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html#wp4769400
111010:
http://www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html#wp4769410
You need to enable syslog, and severity level 5, and if you don't want to see any other logging, you can only log the above 2 syslog numbers.

Can the ACE be configured for logging configuration changes to syslog server ?

Hi,
On all our routers, switches and firewalls we've configured syslog so we get logs when configuration changes occur.
Is this possible on the ACE too ?
regards,
Sebastian

Hi Sebastian,
Yes it is possible but depends upong the logging level you have set. So logging trap 5 should be able to get you the configuration changes or command execution logs.
Nov 1 2013 11:20:33 : %ACE-5-111008: User 'admin' executed the 'logging buffered 6' command.
Nov 1 2013 11:20:48 : %ACE-5-111008: User 'admin' executed the 'no rserver testlog' command.
So you should see these level 5 logs on syslog if logging trap 5 is configured.
Let me know if you have any questions.
Regards,
Kanwal

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

Detect Configuration Changes

Hi All,
Is there any way we can detect whether any changes have been made to the configuration?
Ex: We are having no conversion issues until thursday in requisitions. From Monday, we are having some issues. Is there any way i can check whether any configuration changes have been made in the environment may be on friday or monday morning?
Thanks

In SPRO screen, in Goto and go for change log (F7)..
A new screen "Evaluation of change logs" opens..
Play with it and you will find the changes done in SPRO.
Also you can ask your basis guy to give the log for a particular user or transaction.
Reward if helpful..
Regards,
Srib

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

Configuration changes for transactin CK94 in SPRO

Similar Messages

Maybe you are looking for