Configuration changes history

Hello all,
is there any possibility to view all changes that was done on proxy configuration (access,identity,routing rules) in some time? Currently I need to do following:
- see if there was some change applied: grep system_logs for text "commit changes" to see if there was commited changes,
- and then manually looking inside the couple of records inside the "cli_logs" and "gui_logs" from that time, what was done on appliance. CLI logs are fine, i can see exact commands applied in CLI, but rules are mainly created in Web GUI form and inside the gui_logs I can just see the GET/POST requests with adequate URL. But: 1. this is not clear, so many requests and 2. I cannot differentiate what is just request for page and what is the change in configuration.
Please is there any simple way to determine configuration changes in Web appliance?
many thanks
michal

Hi Michal
Currently "cli_logs" and "gui_logs" are the only logs that records/logs
these changes, unfortunately detailed of the changes made through the GUI
are not record/saved apart from GET/POST request. I believe we do have a
feature request to ³log² ALL the configuration detailed made via CLI or GUI.
Regards,
Zack
On 6/4/12 6:09 AM, "michal.bruncko"

Similar Messages

How to find the Configuration Change History in GRC 10

Hi All,
Any one idea about Configuration settings (TCode =SPRO) change history in GRC 10 ?
I need to know, if any one change in Parameter settings or Connector settings in GRC10
1.I have tried with table DBTABLOG and CDHDR.
2.I have tried with front end Change log and Audit Logs options in Reports and Analytics
But i am not getting required output
Please help me regarding this
thanks,
Suresh

Hi Alessandro
I know this table,But in this table we can see the list of parameter ,But i want to see when this parameter is inserted/changed/updated with date and time
Ex :
Param :1028
I need this info
1.When this param (1028) is inserted ?
2.Any change made on this Param 1028 ?
3.If any change happened on this param 1028, Who made the change and when its changed(date and time)?
we didn't find these info with this table GRACCONFIGSET
thanks,
Suresh

Capture Change history for customized field- MM02.

Hi Friends,
I have created one sub screen with one field i.e., Warranty card No. This will be stored in MARC-ZZMAT1. Change history cannot be capturing for this field. If I made any changes (MM02), we required to capture the changes history.
Please advise where I need to be configured to achieve the above requirement.
Best regards,
Raman.

Hi Raman,
When you define the field (SE11), in the further characteristics tab there is a field Change Document. This needs to be checked
Kindly do this and check
prasanna

Is there a change history for the STAT retention setting?

I've been told that the setting that controls the retention period for the STAT files is maintained by the ST03 transaction. (Export Mode / Collector and Performance DB / Workload Collector / Control Data.)
Is there any kind of change history kept on this setting, or any way to look at what this setting was in the past? We are on SAP Basis version SAPKB62061.
We had this setting originally configured to 72 hours in order to allow us a longer recovery time for problems with FireFighter activity capture. Now the setting is at 48 hours. This has actually caused us to be missing some FF activity. Had some failures on the FF Log Update job from last Friday night and when I went in to manually run the job to capture the missing FF activity, the STAT data is missing.
Need to see if I can determine who changed the setting, and when.
Thanks.

Welcome to the Apple Community William.
Unfortunately, there isn't anything like that available to you.

Changes history of characteristics changes in Sales Order

Dear all ,
I have question regarding changes history. If I enter Sales Order using configurable material, and have entered all the characteristics value. Subsequently I go back to the same sales order and change some of the characteristics value, where do I can see the changes history of the characteristic values that I have changed? I go to display the changes history of sales order or go to see in CDHDR or CDPOS tables, but I can not find the changes history of characteristic values there. Kindly advice
Thanks alot,

Did you ever find a solution for this? We have a similar requirement where we need to see the change history for our batch master characteristics.

Configuration change Log

Hi,
I need to find the configuration change log in development system. Do we have any transaction/report/program from which we can track all the configuration changes for a perticular object.
Thanks,
Vijay

for almost all customizing you can find the change history in menu tools within the cuistomizing.

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

Report for Sales Order Change History CDPOS and CDHDR

How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
Helpful answer would be rewarded.
Regards
Praveen

Dear Praveen Kumar
Have you tried with VBAP where sale order details at item level would be stored.
Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level. Normally, any price increase / decrease would reflect in billing. So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing.
Thanks
G. Lakshmipathi

BP telephone and mobile change history report

Hi,
Requirement: We have a new requirement to create a new report that will display the change history of a customer who has done changes in their mobile or telephone number during a specific period.
My approach was:
Read the cdhdr data based on the objectclass objectID and udate.
Read data from cdpos for all records from cdhdr.
Consolidate and display the report.
All data is coming correct except the type of telephone.
I am not being able to distinguise between the telephone type ( mobile or telephone) using the fname field of table cdpos.
When we insert mobile/telephone thru XD02/XD03, the entries in fname field in cdpos are as TELF1 for telephone and TELF2 for mobile. But when we modify or change the telephone or mobile, each entry of table cdpos in field fname is TELF1 or TEL_NUMBER.
How can we differiantiate which type of telephone number is there in table cdpos? Is there any other change document table we can read to differiantiate between telephone types?
Please suggest. Thanks.

Dear Hemanth,
It does not appear in CDPOS because Data element /SCMTMS/INVOICING_STATUS_CODE does not have CHANGE DOCUMENT enabled.
I have also seen there is no such field to determine invoice status in /SCMTMS/D_TRQROT or /SCMTMS/D_TORROT tables. But we have appended customer specific fields to update the Invoicing status. You will have to do the same if you want.
For quantity, Distance and duration, yes they appear multiple times.
However, the only way is to reduce the number of records is to put a filter on CDHDR-UDATE (Creation date of the change document).
You can also add Change document number additionally to your report selection criteria to improve the result.
Thanks,
Bharath.K

Long time to open tab "change history" of business partner in Web_ui.

Dear experts!
Long time to open tab "change history" of business partner in Web_ui.
4 records were opened for 10-20 seconds
http://imglink.ru/show-image.php?id=22083a6a576f78c66c86863bf6b0573b
1. In what may be the reason?
If the records are many, the discovery may be more than a minute.
2. Is There a report for the purification of the " Сhange history" over a period?

Hello Dilip,
One more alternative would be to increase the time out parameter in ABAP environment.
The steps to change this parameter:
1) txn: RZ11 -> enter the variable name rdisp/max_wprun_time
2) Display -> Change value -> Then input the value you would like        (ideally 3600)
PS:
1) Don't set this value too big, otherwise general performance will be
influenced, since lots of dialogue process will be occupied for a long
time
2) This parameter can be changed dynamically
Once the parameter is set please test again. You can try incremental
values and test which one does not give timeout error.
please refer to the note 25528 for more details about RZ11.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Report for PO Change History

Hi All
Is there any standard report for getting the change history of PO's?
Regards.

Hi U can use this FM.
ME_CHANGES_READ
and ME_READ_CHANGES_EINKBELEG
example
call function 'ME_CHANGES_READ'
exporting
    document_category = it_ekko-bstyp
    document_number   = it_ekko-ebeln
    date_of_change    = it_nast-datvr
    time_of_change    = it_nast-uhrvr
tables
    xcdhdr            = it_cdhdr.
кu03B1ятu03B9к

How can I display append changes history of a multiline textbox in custom form?

I want to display changes history of multiline textbox in custom aspx form as normally display in standard dispform.aspx and editform.aspx page.
How can I do this?

Hello
It seems you want to get the versions of multiline textbox, see following article, may help you
http://www.mtelligent.com/journal/2007/10/17/the-insanity-of-getting-versions-of-a-multilinetext-box-set-.html
Keep us updating.
Ashish Kanoongo, MCP, MCSD, MCTS

Logging CRS configuration changes

Hallo,
in a 10.1 RAC environment,
is there a file which logs CRS configuration changes, like issuing a oifcfg -setif command?
Thx

Yes

SAP CRM 7.0 WebUI: change history is not working

Hi specialists
Our change history is working - but only in SAPGUI.
I found no way to activate / customize it for the WebUI. The corresponding Assignment Block is simply blank.
On the other hand - in the SAPGUI its working like it is mentioned to do.
But it is getting better:
On our test system its working even in the WebUI.
On our prod. system not.
Does somebody of you have any advices/hints for me?
With best regards
Thomas
System: SAP CRM 7.0
2-Tier (test and productive system)
Problem occurs only on productive system in WebUI

Hi,
We are facing same problem for change history on webIC except that all changes to
business partner are visible only changes to contract account are not coming in change history.
for e.g if we changed incoming payment method using tcode CAA2 on ISU change is replicating
on CRM but change history is not showing changes made to incoming payment method.
i have already posted question but got no reply's
[change history is not updating on CRM webIC 7.0]
Following are the components & views which are being called for change history functionality on WebIC.
Component :
BP_HEAD
BP_DATA
View :
BP_HEAD/BPHEADOverview
BP_DATA/AccountChangeHistoryOV
Above view's are as per SAP standard and not modified or enhanced by us.
Thank You,
Sidh

How to display the change history of Z-fields in transaction BP?

Hi,
we have created an append structure to table ADRC. For all fields of the structure the flag "Change document" in the data element is set. This is still working because the changes are in the table CDPOS.
But when I choose "Extras => Change history => For this field" in transaction BP the changes will not be displayed.
Any hints?
Thanks in advance
F.T.

Hi Jaya,
Just do as follows :-
1) Find out in which table are those fields.
2) Then if you find them go to the table, look for the field you want the log to be created for.
3) Double click on its DATA element. On the DEFINITION tab of the data element, there is a checkbox named as CHANG
DOCUMENT. Just TICK it.
4) So every time there a change on this field from the transaction, you can look for the log in table CDHDR.
Regards
Abhii...

Configuration changes history

Similar Messages

Maybe you are looking for