Configuration changes needed on Oracle VM server/manager post IP change

Hi Gurus,
We have Oracle VM 3.2.1 Server and Manager installed on couple of servers. We have created few VMs and configured them for internal use. Internal IT team is changing server IP addresses for these servers, please let me know what are the configuration changes we need to make for the Oracle VM server and Manager Services to come up fine aftre IP changes.
Thanks,
Aditya

Hi,
Are you using a Clustered Servel pool? if yes, the server pool heart beat disk is over an iSCSI on NFS partition/disk ?
Are you using iSCSI or NFS for the repository Location?
Are you using a VALN connection or not?
Best Regards

Similar Messages

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Configuring my OEM for "Oracle Developer Server Forms Manager"

    Hello,
    Please help me in configuring my Oracle Developer Server Forms Manager on Oracle Enterprise Manager.
    thanks to send me the guidelines
    regards
    Yogeeraj

    Hi,
    I have had a look at my installation, and what I did was create two directories called disk1 and disk2, (for the two extracted zip files) and then ran setup in the disk 1 directory. So I don't know if it was aware of the disk 2 directory.
    I am re-installing it now. So I will get back to you.
    Thank you very much for getting back so quickly.
    Regards
    Wayne.

  • Why did I fail to configure ODBC cartridge of Oracle Application Server 3.0.1 Advance

    Firstly, sorry that I don't know if this question is suit for this forum.
    Now I want to query oracle8 database through ODBC cartridge of OWAS. My software environment is: Oracle Application Server 3.0.1 Advanced Version, Oracle8 Enterprise Edition 8.0.4. They are installed in a winNT server.
    First I installed oracle8 ODBC on this server and configure it successfully(that means I can query Oracle8 through ODBC). Then I configured ODBC cartridge in application server administration. In this process, I don't configure ODBCCartridge specific parameters because I don't known which parameter need to be configured. Last I restart WRB, LISTENER(Admin). I input the URL in Navigator 4.o as the following: Http://tpdcserver.tpdc:8888/odbc/tableprint?database=oracle8&dsn=oracle_data&username=system&password=manager&sql=select+fromALL_USERS
    It displayed no correct page but error information: OWB-02002 Driver Failed.
    I don't know why. Please tell me. Thank you very much!
    null

    I have the same problem!
    How can i resolve?
    Thanks
    Nuno

  • Best practices configuring anti virus in oracle application server machine

    Hi all !
    i need to install mcafee 8.7patch3 antivirus software in the server that runs Oracle Application Server 10g R1 (9.0.4)
    Server is an hp proliant dl 580 g2 running windows 2003 enterprise edition sp2.
    I need to hear from your experience , wich files/paths/configs to exclude from anti-virus so i keep server performance ??
    Best regards
    Rui Madaleno

    Hi Rondey,
    Ik think that I can see your probleem.
    Just change the following line at your httpd.conf, then restart the component.
    First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
    the second thing is just try to do the following steps
    ((Port 80 to Port 7777)))
    Listen 7778
    %%%% In loadbalancer section %%%%%%
    just add the following lines
    Listen 80
    Listen 8103
    Listen 8102
    NameVirtualHost *
    NameVirtualHost *:8103 or 80
    If you want to use this ports (8103 or 8102) for other site (url), then
    <VirtualHost *:80>
    ServerName <machine ip> or (host name)
    Hear from U,
    Regards,
    Hamdy

  • What do I need for Oracle Http Server with mod_plsql on Linux 64bit?

    I am trying to get the OHS onto a linux box but I am not quite sure I am installing the correct thing!!
    I currently have a windows box running the 10g Application server but everything seems to have changed since then and there seems to be several different things to do with the Fusion Middleware and stuff. I've tried to find an overview in plain english of what all these things are but all I can find are lots of marketing buzzwords!
    All in need to to be able to run the OHS with the mod_plsql so I can run my apex application. I'd be greatfull if someone could point me in the right direction for what I need to install!
    The box it is going on is a CentOS Linux 64bit machine. I've download and installed Oracle WebLogic Server 11g Rel 1 (10.3.3) using the generic installer for the 64 bit java but there seems to be no http server despite it saying there is! Most likely I am doing something wrong but the installer finishes successfully but nothing is running on port 7001.
    Do I actually need the WebTier instead? Is that the best solution for running the OHS with mod_plsql? Do I need the WebLogic install as well? Unfortunately I am fairly new to Linux as well which isn't helping!!
    thanks for any help
    Robert

    Well, you have two options:
    - Use the OHS from the OFM WebTier Utilities distro. (To use 11.1.1.3 version, you need both the 11.1.1.2 and 11.1.1.3 distros)
    - Use the OHS from the DB Companion Disk distro.
    WebLogic Server is a Java EE application with an HTTP server included, but not intended to be used as a replacement of OHS/Apache. It doesn't support mod's...
    HTH,
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I configure the JServ , but Oracle HTTP Server doesn't work agian

    my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
    when i run flowing command :
    D:\oraias\dcm\bin>dcmctl getstate -v
    and Error message : "ADMN-100999 Base Exception:
    java.lang.ClassCastException:java.lang.Boolean" has shown.
    and i navigate Enterprise Manager web site these Error Message showing:
    "Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
    how can i do? please help me.
    THX

    The key message -
    mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
    Looking up that error gives -
    [jes@spdb1 ~]$ oerr ora 12541
    12541, 00000, "TNS:no listener"
    // *Cause: The connection request could not be completed because the listener
    // is not running.
    // *Action: Ensure that the supplied destination address matches one of
    // the addresses used by the listener - compare the TNSNAMES.ORA entry with
    // the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
    // go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

  • Help Need on Oracle eMail Server 5.1

    Hi,
    I've installed email server 5.1 but I cannot receive e-mails. I have created accounts, I have send mail installed and working. I have configured it accordingly. When I connect it doesn't give me any errors. but When I send emails to an account on my email server I get
    error #4.4.1
    PLUS when I start the email server manually it starts up successfully but when I try to start the service(from services) it give me Service specific error 1
    Can anyone help me???
    Thank you

    This board is for discussion of the Oracle Internet File System. The Oracle Email Server 5.1 is not part of the Oracle Internet File System, so we are unable to provide support for that product in this forum. Please contact Oracle Worldwide Support for further assistance.

  • Guideline needed for Multi-Remote-Server Management

    Hi all,
    I'm busy with a project with multiple SQL servers, each with its own database.
    The setup up is as follows:
    6 SQL servers, where 1 is at the head office and the other 5 are remote branches.
    I need to configure the following:
    When Head office makes any changes to the Column: AveCost
    in the dbo.STK_ProdPrice Table its needs to sync down to all the branches (when Head office does price increases on products). Now the update can run on a schedule (lets say 12am) so if the Table locks it would not cause any problems.
    The SQL database structure for all SQL Servers are exactly the same (Exact same Tables, Exact same Column headings etc.) 
    What would be the best solution for this configuration?

    One option is Replication : Make your head office server as Publisher and keep all other 5 as subscriber ( transactional replication ). There
    is no limit to to the number of subscribers that a publisher can support.
    Another one is AlwaysON -- You can consider using Always 2012 but it will support only 4 replicas, may be you can think about 2014, this will support 8 Replicas, and this will keeps your data in sync..
    sql 2012 -- https://www.simple-talk.com/sql/database-administration/sql-server-2012-alwayson/
    SQL 2014 -- http://msdn.microsoft.com/en-us/library/gg509118.aspx
    Raju Rasagounder Sr MSSQL DBA

  • Help with Oracle Web content Management post installation

    Hi;
    Trying to Implement the oracle content managemant, especially the Web content mangement part of it.
    Doe anybody know of oracle partner that can help with this. I am really crunched for time.

    FONZ,
    We (ImageSource, Inc.) are an Oracle partner that does Oracle UCM & WCM implementations. Here is a link to our information request form. Add a brief description of what you need help with and someone from ImageSource should contact your shortly.
    http://imagesourceinc.com/Company/RequestInformation/index.htm
    - Tyson

  • Use oracle http server to configure mod_plsql

    Hi,
    I have a question.
    I have already installed HTTP server using the Oracle Database10g Companion CD
    on my Windows 2000 SP4.
    At the end of the installation, it refers to http://<computer_name>:7777
    to open the HTTP server page.
    It seems work fine that it showed the Welcome page of HTTP Server and I find this
    "Oracle HTTP Server is the Web server component of Oracle Application Server 10g Release 2 (10.1.2). Oracle HTTP Server is a robust, reliable Web server based on the Apache HTTP Server, version 1.3."
    But I could'nt do anything of using the mod_plsql components nor another
    Modules (mods) which showed in the welcome page since there is no link to such things.
    BTW, I have experienced with the HTTP server previously on Oracle9i
    When I open the HTTP server page, it showed links to some Modules (mods)
    components such as mod_plsql, etc.
    Does the HTTP Server in this version need to be configured to use the links like in Oracle9i's HTTP Server?
    Or the new Oracle HTTP server does not support for this thing?
    Actually, I worked on Oracle Workflow, which need the Oracle HTTP server to configure
    some few things such as DAD.
    Please, can anybody help me to solve this problem.
    Thanks,
    Buntoro

    look at
    http://download-west.oracle.com/docs/cd/B14117_01/server.101/b12255/confmods.htm
    hope this helps
    carlos

  • Bug? Scheduling a single day X for a throughput deduplication job on a volume in Server Manager ... Volume Configure Deduplication becomes day X-1 (previous day) in Task Scheduler

    Scheduling a single day X for a throughput deduplication job on a volume in Server Manager>...>Volume>Configure Deduplication becomes day X-1 (previous day) in Task Scheduler
    Using configure deduplication for a volume in Server Manager, I selected a file age of 0 days (for the initial run), throughput optimization and for the schedule Tuesday at 11:24 pm.
    Going to Task Scheduler>Microsoft>Windows>Deduplication the job is now Scheduled to run Mondays at 11:24pm
    Changing the day to Monday using configure deduplication changes the day in task scheduler to Sunday ... and so on.

    Just for your information, this bug still exists in Server 2012 R2. I just stumbled across it today.

  • What version of SQL Server Management Studio do I need?

    I need to install SQL Server Management Studio on my windows 8.1 PRO 64-bit pc to manage SQL server 2008 R2. do I download the 2014 or 2012  or 2008 version?

    Hello,
    Install the SQL Server Management Studio (SSMS) of the same version of SQL Server you have installed.
    If you modify maintenance plans using a newer version of SSMS, you then cannot use a lower version of SSMS to modify/change it again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Need Oracle HTTP Server for mod_plsql and link to download software

    Hi all,
    I want to use mod_plsql to publish HTML from the database.
    Therefore, I need an Oracle HTTP Server with mod_plsql.
    I have installed the "Oracle HTTP Server with Apache 2.0 10.1.3.1", but there is no mod_plsql included! The welcome page refers to a "Oracle HTTP Server Standalone Administrator's Guide Based On Apache 2.0" which is not installed and can' t be found on OTN.
    Can someone give me a link to Oracle HTTP Server installation software which includes mod_plsql?
    Any hints are welcome!
    Thanks, Markus

    Based on the version of the database, you could use the listener from that - the same XML DB uses. That would not require an application server install at all.
    Alternative: the mod_plsql replacement cartridge off Tom Kyte's site: asktom.oracle.com. Source only - compile against your preferred Apache

  • Cold-Failover with Oracle Weblogic Server 10 R3

    Hi ALL,
    It is possible to configure cold-failover using Oracle Weblogic Server?/
    - 2 instances with the same ip, if one fails the second will run
    - Not comunication between nodes like in normal cluster
    Thanks

    Hello All,
    Have anybody configured auto server migration for cold failover?
    I have a few questions regarding this setup, any help is much appreciated.
    1. for the floating ips to work, do I need 2 NICS and two cables on each server?
    2. Do I have to configure 2 different ips on one interface, which will be used as node manager listen address's for each of the 2 machines?
    3. What will be the listen address of each of these servers(primary server & failover server)? Is it the floating ip address? or empty (all local addresses)?
    4. can we start both the primary server & failover server so when primary goes down, the failover will be quick?
    Thanks,
    Chandra

Maybe you are looking for