Configuration Changes Post Installation
Hi All,
Can someone in the group tell me how is the below scenario handled in other projects involving OM/Configurator/Service modules:
Status: Star item created > Manufactured > Shipped and Installed at customer site
Situation: Customer calls-in and request for some configuration changes. For e.g. a battery of 6v needs to be upgraded to battery of 12v.
We have a requirement to keep a track of such changes made to the configuration after the configured item is shipped and installed at the customer site.
Thanks,
Nitin
Hi All,
Can someone in the group tell me how is the below scenario handled in other projects involving OM/Configurator/Service modules:
Status: Star item created > Manufactured > Shipped and Installed at customer site
Situation: Customer calls-in and request for some configuration changes. For e.g. a battery of 6v needs to be upgraded to battery of 12v.
We have a requirement to keep a track of such changes made to the configuration after the configured item is shipped and installed at the customer site.
Thanks,
Nitin
Similar Messages
-
SLD port problem in Netweaver XI post installation configuration steps
Hi All,
Recently we changed the port number of the SAP server to 80.Every thing working fine.
When ever we are configuring the XI that mean the post installation steps for Exchange Infrastructure it giving the errors in machine_technical_configuration step.
Error Message is:
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':Error during executing Java Reflection:IO error: Unable to open connection to host "mmsr18:50000". The host is down or unavailable..
Is there any solution to solve this....
Thanks & Regards,
Vivek.hi
check if the new port(80) is maintained in tcode- sldapicust
Thx
jonu -
On XI - Post Installation & Configuration
Dear XI Gurus,
I am working on a simple file to file scenario to ckeck if my installation and post installation are successful.
I completed all my design work in the repository successfully.When i move to the configuration in integration directory and when in try to assign a business system i get the error mentioned below.
I'm assuming this to be a post insallation issue.Can you pls help me on this issue.
Unable to find an associated SLD element(source element:SAP_XIIntegrationServer,[CreationClassName,SAP_XIIntegrationServer,string,Name,is.00.<hostname>,string],target element type:SAP_BusinessSystem)Hi Ratnakar,
Check these..
Unable to find an associated SLD element
Unable to find an associated SLD element
XI Integration directory during channel creation
Problem with generating Sender Agreements
Transport problem
cheers,
Prashanth
P.S Please mark helpful answers -
Post-Installation and Configuration of Solution Manager 7.1
Dear community,
we are a SAP Channel Partner and want to offer SAP BO support; therefore I am about to set up the Solution Manager 7.1 on a Windows 2008 R2 host with Oracle Database 11g. The installation has been completed successfully and I have applied our permanent license, but performing the following post-installation steps some problems and questions have arised. Because I don't want to write a novel right here, let's begin with the first issue:
Updating the Solman, as suggested in post-installation.
I want to update my ISS to SP 04 and followed the common instructions using ESPIN and SPAM (see, for example, this thread: ).
That means, all packages have been loaded from ESPIN into SPAM. The problem is, that I have SPAM version 0039, but I get error message "you need at least version 0040" when I try to start the update queue. Also, I am not able to download a newer version of SPAM from SMP (702-0043 and 702-0045 are available there), because I need MOPZ for that (a message comes up telling me that items in my download basket have to be confirmed before I am allowed to download them), which will be available not before basic configuration during solman_setup later on.
So, what to do? Is there another way to get that 5MB SPAM update or do I have to go on with the old version?
Thanks in advance
Sönke
Edited by: Sönke Schnurr on Dec 29, 2011 4:15 PM (small addendum)Okay, I am just re-installing my Solution Manager 7.1, because I couldn't solve my SPAM problem (linked thread in my next-to-last post).
I would like to configure the whole SAProuter SNC thing now. The Solution Manager host is the same which has the SAProuter installed. I have already registered and certified it and created the Windows Service which starts the SAProuter (saprouter -r -S 3299 -G routerlog -K u201Cp:CN=XXX, OU=YYY, OU=SAProuter, O=SAP, C=DEu201C), XXX and YYY being the appropriate values.
Now I want to create my saprouttable. A beta version is this one here, based on some tutorials in the internet:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 3200
1. deny all other connections
D * * *
Do you think it's alright? I'm connecting via host port 3299, so the first two lines should be alright, shouldn't they?.
The fourth line P ? The local IP address of my host? What is that line for at all?
Another question: The connection to OSS doesn't work yet, probably because of our local hardware router firewall. Which ports do I have to forward? I suppose it is just 3299?
An elaborate answer would be highly appreciated!
Regards
Sönke -
Need Post installation configuration guide for PI 7.0
Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
VinodHI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla -
Post Installation Configurations for WAS640
Hello All,
We have installed Sneak preview of WAS640.We have also installed SAP on the same system.
What do we need to do as part of post installation activities for accessing the data from our SAP system.
We have also developed a dynpro application in which we would like to fetch the data from SAP and then displaying the data on the User Interface.
We are unable to fetch the data from the SAP system.
What steps needs to be carried out to fetch the data from SAP?
Do we require Exchange infrastructure for the same.
Also can anybody please tell me when would the full fledged version of WAS640 be available?
Pradeep> Hello All,
> We have installed Sneak preview of WAS640.We have
> also installed SAP on the same system.
Since all of this is from SAP, i guess you mean an ABAP system.
>
> What do we need to do as part of post installation
> activities for accessing the data from our SAP
> system.
Some mandatory activities to access an ABAP system from Web Dynpro are documented at this tutorial: https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD5_BAPI.htm
>
> We have also developed a dynpro application in which
> we would like to fetch the data from SAP and then
> displaying the data on the User Interface.
>
> We are unable to fetch the data from the SAP system.
>
>
> What steps needs to be carried out to fetch the data
> from SAP?
If you mean a Web Dynpro application, the tutorial might be helpful.
>
> Do we require Exchange infrastructure for the same.
No. Not on this "level".
>
> Also can anybody please tell me when would the full
> fledged version of WAS640 be available?
>
Synchronized NetWeaver '04 rollout (AFAIK) is October 2004. This includes the (first) production version of the WAS 6.40.
> Pradeep
Regards
Stefan -
Configuration changes needed on Oracle VM server/manager post IP change
Hi Gurus,
We have Oracle VM 3.2.1 Server and Manager installed on couple of servers. We have created few VMs and configured them for internal use. Internal IT team is changing server IP addresses for these servers, please let me know what are the configuration changes we need to make for the Oracle VM server and Manager Services to come up fine aftre IP changes.
Thanks,
AdityaHi,
Are you using a Clustered Servel pool? if yes, the server pool heart beat disk is over an iSCSI on NFS partition/disk ?
Are you using iSCSI or NFS for the repository Location?
Are you using a VALN connection or not?
Best Regards -
#I hope its the right forum to post that in, if not im very sorry!
This here is a script i wrote to automate all the stuff i do after installing arch, i have several computers and it has options for a additional one
Some important points:
1) this script is very specific, its made for my computer and my needs, this means that its useful right now only to people who know bash
and will find use in altering it to their own needs, also if someone wants he can make it more general for a wider use
2) this is one of the first scripts i wrote, it may be that it doesn't implent some of its features in the best way possible
3) use it at your own risk, if it breaks your system don't blame me please, you should check it before you use it, anyway its meant to be used
on a FRESH arch install, not on a working system.
What the correct script actually does:
The script as stated in the comments does the next things:
1) First of all it consists of several files, one the "install" file is the actual script, the others are just meant to run the script and split its output to
show both on the terminal and in a file named: /var/log/MySysInstall.log, here is an example of main.install:
#!/bin/bash
./install Main | tee /var/log/MySysInstall.log
in the current script Main in the last row can be replaces with Laptop, Game for computer specific arguments or without argumets for a general install
the two files should be in the same folder, i think it could have been implented with one file but im new to scripting..
2) The script will ask some general questions to make sure everything is currect, some of the questions and checks in the script are not relevant at all
to anybody other than myself, they usually make sure that i have a samba shared partition running (it could lose connection on wireless).
3) Adds the archlinux.fr repo, it will be used for yaourt.
4) The script installs lots of stuff, at first general stuff used by all computers in my house, then stuff based on the argument given in 1)
please inspect the packages and change according to your needs
5) The script nano's to /etc/yaourtrc
6) Adds users to the system, change to your users.
7) It creates my /home/samba share dir if its not created (probably irrelevant to you)
8) Configures sudo in a nasty way that maybe can damage the sudoers file, delete this line if you dodnt know sudo well enough.
9) Edits samba if needed, this is the first line in the script that relies on additional files i have on my comp or the samba share (main and game are the same
comp (dual boot of arch32 and 64) and they are the hosts of /home/samba all the other computers will mount it from them, this is why a samba check is not
present here.).
10) Adds some commented lines to fstab and nano's it for easier configurations, this is the regular workflow in the script BTW (adding comments to the file
before editing it)
11) Helps edit the gpm daemon
12) Helps to configure alsa
13) Helps to configure xorg
14) Does some post install copies of files AND creates a file in my main users home with further instructions, mostly for stuff that needs to be done with xorg runnig
or stuff i was to lasy to add to the script
15) chowns and sets my regular permissions for user folders
16) ends the script
The script itself, ENJOY:
#!/bin/bash
# Copyright 2008 Leon Vayman
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# A copy of the GNU General Public License is found in
# <http://www.gnu.org/licenses/>.
#Check that the user updated the kernel and restarted before proceeding
while [ 1 ] ; do
echo ; clear
echo -n "Have you already used pacman -Syu and Restarted? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
echo "Then do it now.."
exit
esac
done
#Check if samba is accesible and warn the user if its not (offering to quit)
if [ ! -e /home/samba/Config/ ] ; then
while [ 1 ] ; do
echo ; clear
echo -n "Samba is not accesible, do you want to proceed? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
fi
#Make sure the app wasnt ran accidently with wrong arguments
while [ 1 ] ; do
echo ; clear
echo -n "The comp you are on is $1 is that correct? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
break
[Nn])
exit
esac
done
#Edit /etc/pacman.conf
echo ; clear
echo >> /etc/pacman.conf
echo "[archlinuxfr]" >> /etc/pacman.conf
if [ "$1" = "Game" ] ; then
echo "Server = http://repo.archlinux.fr/x86_64" >> /etc/pacman.conf
else
echo "Server = http://repo.archlinux.fr/i686" >> /etc/pacman.conf
fi
echo -n "Make sure the right archlinux.fr repo was added "
read n1
nano /etc/pacman.conf
echo ; clear
#Install all packages
echo "Installing packages"
pacman -Syu
pacman -S yaourt
pacman -S xorg
pacman -S gstreamer0.10-plugins
yaourt -S abiword alsa-lib alsa-utils alsa-oss bash-completion cabextract centerim conky exaile hal epdfview feh freetype2 gamin gconf-editor geany gksu gmrun gnome-icon-theme gpicview \
gtk-engines zip irssi jre links-g libdvdcss tcl lxappearance lxpanel lxde-common lxrandr lxtask mesa moc mousepad mplayer-plugin numlockx openbox obconf obmenu openbox-themes \
p7zip pcmanfm pidgin pm-utils powertop screen terminal ttf-bitstream-vera ttf-dejavu ttf-freefont ttf-ms-fonts unace unrar unzip xarchiver xchat xmahjongg
yaourt -S stjerm
case "$1" in
"Laptop")
yaourt -S vlc keytouch keytouch-editor xf86-video-i810 synaptics cpufrequtils flashplugin
yaourt -S swiftweasel-pentium-3
yaourt -S wpa_supplicant-beta
yaourt -S xcompmgr-git
"Main")
yaourt -S flashplugin cpufrequtils epiphany catalyst deluge amule xmoto abs samba
yaourt -S icecat
yaourt -S xcompmgr-git
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
"Game")
yaourt -S epiphany catalyst deluge amule xmoto abs samba ##!! add gnash or swfdec
yaourt -S icecat
yaourt -S ekiga3
yaourt -S ov51x-jpeg
yaourt -S vlc-branch
yaourt -S brasero-no-gnome
echo -n "No extra packages installed "
esac
echo -n "Press Enter to continue "
read n1
echo ; clear
#Configure yaourt.rc
echo -n "Replace the editor in yaourtrc "
read n1
nano /etc/yaourtrc
echo ; clear
#Add users
echo "Adding User vleon"
useradd -d /home/vleon -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m vleon
echo "Set vleon's password"
passwd vleon
echo ; clear
echo "Adding User masha"
useradd -d /home/masha -g users -G disk,wheel,games,video,audio,optical,storage,power,dbus,hal,avahi,log -m masha
echo "Set masha's password"
passwd masha
echo ; clear
#If for some reason samba dir doesnt exist, create it
if [ ! -e /home/samba ] ; then
mkdir /home/samba
chown vleon:users /home/samba
chmod 770 /home/samba
fi
#Configure visudo
echo -n "uncomment wheel in visudo and make sure the added lines are correct "
read n1
echo "#%power ALL=(ALL) NOPASSWD: /usr/sbin/pm-hibernate" >> /etc/sudoers
echo "#%power ALL=(ALL) NOPASSWD: /sbin/shutdown" >> /etc/sudoers
visudo
echo ; clear
#Edit samba if needed
if ( [ "$1" = "Main" ] || [ "$1" = "Game" ] ) ; then
echo -n "Edit swat "
read n1
cp /home/samba/Config/etc/xinetd.d/swat /etc/xinetd.d/swat
nano /etc/xinetd.d/swat
echo ; clear
echo -n "Edit Hosts "
read n1
cp /home/samba/Config/etc/hosts.allow /etc/hosts.allow
nano /etc/hosts.allow
echo ; clear
echo -n "Edit smb.conf "
read n1
cp /home/samba/Config/etc/samba/smb.conf /etc/samba/smb.conf
nano /etc/samba/smb.conf
echo ; clear
echo "Set vleon's samba password"
smbpasswd -a vleon
echo ; clear
echo -n "Add samba and xinetd daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
fi
#Edit fstab
echo -n "Edit fstab "
read n1
echo >> /etc/fstab
if [ "$1" != "Laptop" ] ; then
echo "#UUID=92D8DA69D8DA4ADD /mnt/windows ntfs-3g defaults,noatime 0 0" >> /etc/fstab
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] ) ; then
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
fi
nano /etc/fstab
echo ; clear
else
echo "#UUID=0E15-1D06 /mnt/windows vfat defaults,noatime,umask=0000 0 0" >> /etc/fstab
echo "#//192.168.1.100/samba /home/samba cifs defaults,noatime,noauto,user=vleon%pass 0 0" >> /etc/fstab
echo "##change the above password!!" >> /etc/fstab
nano /etc/fstab
echo ; clear
fi
#Edit gpm
echo -n "Edit gpm "
read n1
echo "#GPM_ARGS=\"-m /dev/input/mice -t imps2\"" >> /etc/conf.d/gpm
nano /etc/conf.d/gpm
echo ; clear
echo -n "Add gpm daemon to rc.conf "
read n1
nano /etc/rc.conf
echo ; clear
#Configure alsa
Alsa Config
test=1
echo -n "Edit alsamixer "
read n1
while [ "$test" = 1 ] ; do
alsamixer -V all
echo "Testing Sound"
aplay /usr/share/sounds/alsa/Noise.wav
while [ 1 ] ; do
echo ; clear
echo -n "Did You Hear Any Sound? (y/n) "
read Keypress
case "$Keypress" in
[Yy])
test=0
break
[Nn])
break
esac
done
done
alsactl store
echo -n "Add alsa to daemons "
read n1
nano /etc/rc.conf
echo ; clear
#Configure Xorg
if [ -e /home/samba/Config/etc/X11/ ] ; then
echo -n "Edit xorg.conf "
read n1
if ( [ "$1" = "Laptop" ] ) ; then
cp /home/samba/Config/etc/X11/laptop.xorg.conf /etc/X11/xorg.conf
else
cp /home/samba/Config/etc/X11/main.xorg.conf /etc/X11/xorg.conf
fi
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
else
echo -n "No samba connection found, manually editing xorg.conf "
read n1
X -configure
mv /root/xorg.conf.new /etc/X11/xorg.conf
echo >> /etc/X11/xorg.conf
echo "# Option \"XkbLayout\" \"us,il\"" >> /etc/X11/xorg.conf
echo "# Option \"XkbOptions\" \"grp:alt_shift_toggle,grp_led:scroll\"" >> /etc/X11/xorg.conf
echo "# DefaultDepth 24" >> /etc/X11/xorg.conf
echo "# Modes \"1680x1050\" \"1280x1024\" \"1024x768\" \"800x600\"" >> /etc/X11/xorg.conf
if [ "$1" = "Laptop" ] ; then
echo >> /etc/X11/xorg.conf
echo "#Section \"InputDevice\"" >> /etc/X11/xorg.conf
echo "# Identifier \"Touchpad\"" >> /etc/X11/xorg.conf
echo "# Driver \"synaptics\"" >> /etc/X11/xorg.conf
echo "# Option \"Device\" \"/dev/input/mouse0\"" >> /etc/X11/xorg.conf
echo "# Option \"Protocol\" \"auto-dev\"" >> /etc/X11/xorg.conf
echo "# Option \"LeftEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"RightEdge\" \"5300\"" >> /etc/X11/xorg.conf
echo "# Option \"TopEdge\" \"1700\"" >> /etc/X11/xorg.conf
echo "# Option \"BottomEdge\" \"4200\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerLow\" \"25\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerHigh\" \"30\"" >> /etc/X11/xorg.conf
echo "# Option \"FingerPress\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapTime\" \"180\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxTapMove\" \"220\"" >> /etc/X11/xorg.conf
echo "# Option \"VertScrollDelta\" \"100\"" >> /etc/X11/xorg.conf
echo "# Option \"MinSpeed\" \"0.06\"" >> /etc/X11/xorg.conf
echo "# Option \"MaxSpeed\" \"0.12\"" >> /etc/X11/xorg.conf
echo "# Option \"AccelFactor\" \"0.0010\"" >> /etc/X11/xorg.conf
echo "# Option \"SHMConfig\" \"on\"" >> /etc/X11/xorg.conf
echo "#EndSection" >> /etc/X11/xorg.conf
fi
echo -n "Edit xorg.conf "
read n1
nano /etc/X11/xorg.conf
echo ; clear
echo -n "add \"ru\" to xorg.conf.mom "
read n1
cp etc/X11/xorg.conf etc/X11/xorg.conf.mom
nano /etc/X11/xorg.conf.mom
echo ; clear
fi
#Start the post install document and copy files to homes if able and need to
echo "Post Installation Instructions" > /home/vleon/PostInstall.txt
echo "------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Usage: Follow the instructions and delete the lines that are not relevant anymore. you can delete" >> /home/vleon/PostInstall.txt
echo " this file after you finished." >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
if [ ! -e /home/vleon/.config] ; then
if [ -e /home/samba/Config/ ] ; then
cp /home/samba/Config/.bash_profile /home/vleon/ ; cp /home/samba/Config/.bash_profile /home/masha/
cp /home/samba/Config/.bashrc /home/vleon/ ; cp /home/samba/Config/.bashrc /home/masha/
cp /home/samba/Config/.xinitrc /home/vleon/ ; cp /home/samba/Config/.xinitrc /home/masha/
cp /home/samba/Config/.xserverrc /home/masha/
mkdir -p /home/vleon/.config/openbox ; mkdir -p /home/masha/.config/openbox
cp /home/samba/Config/.config/openbox/rc.xml /home/vleon/.config/openbox/ ; cp /home/samba/Config/.config/openbox/rc.xml /home/masha/.config/openbox/
if [ "$1" = "Laptop" ] ; then
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
cp /home/samba/Config/.Xdefaults.laptop /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.laptop /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.laptop /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.laptop /home/masha/.config/openbox/autostart.sh
else
if ( [ "$1" != "Main" ] && [ "$1" != "Game" ] )
cp /home/samba/Config/.conkyrc.laptop /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.laptop /home/masha/.conkyrc
else
cp /home/samba/Config/.conkyrc.main /home/vleon/.conkyrc ; cp /home/samba/Config/.conkyrc.main /home/masha/.conkyrc
fi
cp /home/samba/Config/.Xdefaults.main /home/vleon/.Xdefaults ; cp /home/samba/Config/.Xdefaults.main /home/masha/.Xdefaults
cp /home/samba/Config/.config/openbox/menu.xml.main /home/vleon/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/menu.xml.main /home/masha/.config/openbox/menu.xml
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/vleon/.config/openbox/autostart.sh
cp /home/samba/Config/.config/openbox/autostart.sh.main /home/masha/.config/openbox/autostart.sh
fi
else
echo >> /home/vleon/PostInstall.txt
echo "!!Samba is not availble, you will have to create the following files yourself!!" >> /home/vleon/PostInstall.txt
fi
echo >> /home/vleon/PostInstall.txt
echo "The folowing files where probably created in your home folders:" >> /home/vleon/PostInstall.txt
echo ".bash_profile" >> /home/vleon/PostInstall.txt
echo ".bashrc" >> /home/vleon/PostInstall.txt
echo ".conkyrc" >> /home/vleon/PostInstall.txt
echo ".Xdefaults" >> /home/vleon/PostInstall.txt
echo ".xinitrc" >> /home/vleon/PostInstall.txt
echo ".xserverrc #<< only to /home/masha" >> /home/vleon/PostInstall.txt
echo ".config/openbox/autostart.sh" >> /home/vleon/PostInstall.txt
echo ".config/openbox/menu.xml" >> /home/vleon/PostInstall.txt
echo ".config/openbox/rc.xml" >> /home/vleon/PostInstall.txt
echo "!!Make sure the above files created and are configured properly!!" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "Configuration Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) make sure width and hight are correct .Xdefaults" >> /home/vleon/PostInstall.txt
echo "2) make sure to comment the \"xcompmgr\" line in autostart.sh, to fit the Computer and User" >> /home/vleon/PostInstall.txt
echo "3) use obmenu and obconf later to tune up stuff" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "rc.conf Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) possible modules are: powernow-k8 or acpi-cpufreq, cpufreq_ondemand, ov51x-jpeg, fglrx" >> /home/vleon/PostInstall.txt
echo "2) possible daemons are: hal, cpufreq, acpid [laptop], netfs, keytouch" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "-------------------------------------------------------------------------------------------------" >> /home/vleon/PostInstall.txt
echo >> /home/vleon/PostInstall.txt
echo "General Guidelines:" >> /home/vleon/PostInstall.txt
echo "1) copy or compare the files from /home/samba/Config/etc to /etc" >> /home/vleon/PostInstall.txt
echo "2) on the laptop, dont forget to add the additional scripts needed from the /home/samba/Config/, dont forget to backup replaced files" >> /home/vleon/PostInstall.txt
echo "3) add resume=/dev/sda3 to /boot/grub/menu.lst if its not there already" >> /home/vleon/PostInstall.txt
echo "4) dont Forget to configure gksu after launching X" >> /home/vleon/PostInstall.txt
echo "5) lauch and configure all the apps in the menu and the cmdline apps links -g, mocp, irssi, centerim" >> /home/vleon/PostInstall.txt
echo "6) test logout, reboot, shutdown and hibernate" >> /home/vleon/PostInstall.txt
echo "7) configure keytouch on the laptop" >> /home/vleon/PostInstall.txt
echo "8) if it doesnt exist mkdir ~/.Theme for both users and add a jpg picture named theme.jpg to be the wallpaper" >> /home/vleon/PostInstall.txt
echo "9) read /var/log/MySysInstall.log and make sure all was succesfull especialy AUR install's like icecat or iceweasel" >> /home/vleon/PostInstall.txt
echo "10) run lxappearance, configure lxpanel, configure terminal" >> /home/vleon/PostInstall.txt
echo "11) run powertop after you restart again with all the modules and daemons and other stuff configured" >> /home/vleon/PostInstall.txt
#Return ownership to the approtiate users
chown -R vleon:users /home/vleon ; chown -R masha:users /home/masha
chmod /home/vleon 750 ; chmod /home/masha 750
chmod /home/vleon/.config 750 ; chmod /home/masha/config 750
chmod /home/vleon/.config/openbox 750 ; chmod /home/vleon/.config/openbox 750
#End
echo "Install Finished, please additional instructions where created in /home/vleon/PostInstall.txt"
read n1
exitluckystar09 - I'd say you're on your own there. This thread is nearly a year old, and Black Mage hasn't posted here since. Read the script, and modify it yourself as required.
Forum rule - do not post in threads that have been inactive for six months of more. See here for full details.
Closed. -
WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish
I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
Problem in post installation of PI7.1
Hi All expert ,
I facing problem in post installation of PI7.1 ,
I have tried to run net weaver initial setup with the help of configuration wizard we are facing given following problem .
During 60% of instatllation I have got error u201CChoose a password that is different from your last 5 passwordsu201D I have changed it in ABAP side but still getting same error
When I skip this step then second error
: Choose a password that is different from your last 5 passwords 'PI_JCO_RFC'
AI_RUNTIME_JCOSERVER
RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts
Is it any way to change all standard user(i.e. created during installation ) like PI*, password in one shot in both ABAP side and JAVA side .
Regards,
AmitHi,
that problem is resolved now m facing other problem during initial setup of configuration wizard .
please see detail log .
NetWeaver initial setup > PI UT initial setup > PI initial setup > Configure IntegrationServer > Initial setup of functional unit IntegrationServer > Initial setup of functional unit IntegrationServer > This wizard will execute Postinstall steps of technical configuration > Executing BAPI SXMB_SET_ROLE_TO_IS
Executing BAPI SXMB_SET_ROLE_TO_IS
Description
No specified detailed description
State
START_ACTION
Support Information
Type of Action
InvokeServiceDebug Events
error message
Error: Execution of Function SXMB_SET_ROLE_TO_IS ends with an error (cause:ONLY_ONE_CENTRAL_XMB:100, error code:092).
error message
Error: Execution of Function SXMB_SET_ROLE_TO_IS ends with an error (cause:ONLY_ONE_CENTRAL_XMB:100, error code:092).
InvokeService:Executing BAPI SXMB_SET_ROLE_TO_IS
Library: sap.com/tclmconfig~content
SourcePath ./NetweaverProcess/PIJavaConstraint/PIJavaProcess/IntegrationServerRootProcess/IntegrationServerProcess/IntegrationServerProcess/SXMB_SET_ROLE_TO_IS/INVOKESERVICEBAPIIS
Time 2009/07/31 at 14:30:47
WSDL content/Netweaver/PI/IntegrationServer/service/BAPIConfiguringRoleOfIS.wsdl
Destination parameters
user : PISUPER
password : % secure content %
host : ctsgvcsapbl03
sysnr : 10
client : 001
language : en
function name: SXMB_SET_ROLE_TO_ISInput
<Input>
<NAME>EGAL</NAME>
</Input>
InvokeService- Result: Failed
Exception Message:Execution of Function SXMB_SET_ROLE_TO_IS ends with an error (cause:ONLY_ONE_CENTRAL_XMB:100, error code:092).
Exception Class:com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException
Stacktrace
com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:171)
error message
Error: Execution of Function SXMB_SET_ROLE_TO_IS ends with an error (cause:ONLY_ONE_CENTRAL_XMB:100, error code:092).
Regards,
Amit -
Problem during Post Installation in PI 7.1
Dear All,
While doing post installation steps in PI 7.1 Server all the configurations are taking place in client 001 though we have done the client copy from 001 to 200. All the user id etc are getting created in client 001 only. I have changed the client id in RFC "I18NBackendConnection" and "UMEBackendConnection" in http://<host>:<hport>/nwa then also its taking 001 client only.
Please guide me on how to do the configurations so that everything is done in 200 client.
Regards,
NJNishu,
AYou could have resolved this isuue by running the client copy (SAP note - 1115280) before running the config wizard.
You have rerun the
client copy step - follow the SAP note 1115280 as is.
and you will be fine... I think you may have to manually change the clients in the Java stack - Jco connection and RFC destination.
regards,
Arvind R -
POST Installation steps for SAP XI 7.0 SP06
Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly helpHi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful) -
Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Post installation for Portal and errors for new system
I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun
Maybe you are looking for
-
Sharing itunes with three user accounts?
On my mac there are three user accounts, and i want to move my itunes library from one user account to another.
-
How to get contacts onto ipad / iphone from exchange
Hi, I've setup an exchange account on my iphone / ipad. But, it's pulling down all these contacts I don't really care for. Is there a way thru Itunes or maybe icloud to select the contacts I want installed from our exchange server? I would then di
-
I am attempting to create a new sub-account for my daughter, but the "Manage Sub-Account" button does nothing. Does anyone know how to create a new sub-account or how to get this working? Thanks
-
How long does it takes to review a book
I uploaded my book through Ibooks Author 6 days ago and it's still in review, also there is no any tickets to see what's going on How long book can be in review and what can I do in this situation ? Thanks
-
Calling first query to get parameters for second query
Newbie trying to convert an Oracle Report to BI. The report has 1 parameter from the user, which is plugged into a query that returns grouped data (4 values, 1 row). This data is then used in multiple places (not just where clause) in a second query