Configuration check EP6 620 - Connection runs over a different http port

Hi for all.
Please, I have a doubt..., how can I to check this:
"please note that SSL connection runs over a different http port on your WebAS so, please check that this port and protocol is available from your extranet."
Where can I find this configuration?
Somebody could send me a step by step?
Thanks,
Jon
Message was edited by: Joncilane Oliveira

Ok Paul.
I'm lookig for this, because I have the following problem:
Digital certificate.
Problem with EXTRANET.
We have a EP6 installation running without problems.
Now we are in phase of EXTRANET TEST using the URL:
https://www.extranetp.prebanco.com.br/irj, however We are having the following problem message in our browser:
HTTP 403.4 - Forbidden: SSL required
Internet Information Services
In the operation system was generated the following problem message:
#Software: Microsoft Internet Information Services 5.0
#Version: 1.0
#Date: 2006-06-19 14:04:21
#Fields: date time c-ip cs-username s-ip s-port cs-method cs-uri-stem
cs-uri-query sc-status cs(User-Agent)
2006-06-19 14:04:21 10.241.42.46 - 10.241.42.46 443 GET /Default.htm -
200 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
2006-06-19 14:04:21 10.241.42.46 - 10.241.42.46 443
GET /componentes/cabec.htm - 200 Mozilla/4.0+
(compatible;MSIE6.0;WindowsNT+5.0)
And the SAP support requested for verify our configuration, but I don't know this cnfiguration.
Thanks,
Jon

Similar Messages

  • Saprouter to run on a different service port

    Hello!!
    I am running saprouter on a Linux system which is already being used as a mail-relay server. So. most of the service ports have been used in the system. Hence I cant use the default port 3299 for saprouter. Is there a way to run saprouter on a different port, for instance 3999?
    I tried -S option with saprouter, but it doesn't seem to be working.
    Any help in this regard will be greatly appreciated.
    Thanks in advance!
    Regds
    Sapna

    Hello Dolores,
    This makes complete sense!! I did not think through this at all. SAP has already opened 3299 for me and I dont think I can change it now.
    But, I was just wondering, that changing the service port on the saprouter system (i.e running saprouter on 3999) will change things only in my internal network and should not change anything in the way my saprouter talks to the SAP system over the internet (using SNC), isn't it? As, the connection will still go through 3299 from the saprouter system to the internet. The problem might arise when my internal solution manager system is trying to reach the saprouter?
    Am I making sense? Or, have I totally confused you
    Thanks a ton for your prompt reply as always!!
    Regds
    Sapna

  • [svn] 1743: In the process of changing the messaging authentication tests to run over individual channels .

    Revision: 1743
    Author: [email protected]
    Date: 2008-05-15 12:26:11 -0700 (Thu, 15 May 2008)
    Log Message:
    In the process of changing the messaging authentication tests to run over individual channels. Before the tests were just running over the first/default channel in the destination. Now the tests will be hardcoded to run over a particular channel. In this checkin I am removing the existing authentication tests and checking in tests that run over a polling amf channel. Tests for other channels are coming soon.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/messaging-config.mods.xml
    Added Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest2.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MultiTopicMessagingAuthConSubscribeTest.mxml
    Removed Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/JMSAuthSendSubscribeConstraintTest_Streaming.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthConSubscribeTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthProSendTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthSendSubscribeConstraintTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MessagingAuthenticationTest2.mxml
    blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/MultiTopicMessagingAuthConSubscribeTest.mxml

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Personas Configuration Check

    I've recently upgraded to Personas 2.0 SP02 and I'm having some trouble getting the RFC destination required for the Configuration check tool to work.
    When attempting to create the RFC destination (as detailed in this blog: Personas - Enabling Configuration Check of Target Systems),  I'm receiving an HTTP 404 - Not Found error when testing the connection. I've validated the host and port # are correct and working since I can successfully test the restgui service. The logon procedure I'm using is an SAP RFC Logon and the user has SAP_ALL. I'm unsure of what else to check??
    Any and all ideas are welcome.
    Thanx in advance,
    Elder

    Thanx Thien, after using that prefix path value to test I was able to successfully test the RFC destination. So I removed the prefix path and saved my entry.
    I ensured that the HTTP Connection value in the Maintain Systems configuration points to my new RFC Destination and it does. However, when I go to the Configuration Check tool I'm seeing "Unable to determine configuration" for the last 6 in the Target systems list. Please see the attached screen shot.
    All the information I've found points to an incorrect RFC destination causing the message below, but that's obviously working fine. Any idea what else it may be?

  • Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

    Hi friends,
    Getting the below error in step 10 (configuration check) in managed system configuration.
    The SMD Agent is not able to connect the Satellite System (J2EE stack).
    Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
    System.
    java.rmi.RemoteException.P4 Connection failed -
    P4AuthorizationException -
    com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
    Access is denied to SAP System sid [XYZ/null]: check the connection
    credentials.More details about the error in agent 'xyz' log file
    (SMDAgentApplication.X.log).; nested exception is:
    com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
    authenticate the user.
    The SMD log file referred to in the log above gives the same information and not anything much useful.
    Any idea what could be the reason for the above error?
    Thanks,
    Arindam

    Hi All,
    Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
    The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
    Hi Khaja,
    I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
    All I am getting is this -
    The SMD Agent is not able to connect the Satellite System (J2EE stack).
    Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
    java.rmi.RemoteException.P4 Connection failed -
    P4AuthorizationException -
    com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
    Access is denied to SAP System sid [XYZ/null]: check the connection
    credentials.More details about the error in agent 'xyz' log file
    (SMDAgentApplication.X.log).; nested exception is:
    com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
    authenticate the user.
    Thanks,
    Arindam

  • Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

    I am having a problem installing Nikon Codec, software to view photos and get this error error message: Setup has experienced an error. Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • TS1717 Error comes up in iTunes on check for updates "The iTunes update server could not be contacted.  Please check your internet connection, or try again later."  Currently connected to the internet, on HP Laptop running latest version of Windows 7.

    Error comes up in iTunes on check for updates "The iTunes update server could not be contacted.  Please check your internet connection, or try again later."  Currently connected to the internet, on HP Laptop running latest version of Windows 7.
    I get the same problem running the diagnostics.  Says network connections are present and in the green, but unable to connect to iTunes Store.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

    hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

    use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

  • [svn] 4258: Bug: LCDS-522 - Add more configurable reconnect handling for connecting up again over the same channel when there is a connection failure /outage.

    Revision: 4258
    Author: [email protected]
    Date: 2008-12-08 16:33:17 -0800 (Mon, 08 Dec 2008)
    Log Message:
    Bug: LCDS-522 - Add more configurable reconnect handling for connecting up again over the same channel when there is a connection failure/outage.
    QA: Yes
    Doc: No
    Checkintests Passes: Yes
    Details:
    * Updates to configuration handling code and MXMLC code-gen to support new long-duration reliable reconnect setting.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-522
    Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfiguration.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfigurationParser.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ServicesDependencies.java
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    Added Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/FlexClientSettings.java
    Removed Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/FlexClientSettings.java

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • I had the galaxy 3 withwifi issues. I recently obtained the droid maxx. it says that I am connected but over the past two months I've gone over data!  I have two lines , we checked the numbers in "my verizon" and it pretty much validated our suspicions! i

    I had the galaxy 3 with no wifi issues. I recently obtained the droid maxx. it says that I am connected but over the past two months I've gone over data!  I have two lines , we checked the numbers in "my verizon" and it pretty much validated our suspicions! it's this phone. Is there something I should check? It says connected to wifi, wifi is fine.....confused.

    Kimberly1966 we'll solve this mystery and put an end to the overage! Do you disable data when connected to Wi Fi? If not, I would recommend doing so to prevent accidental usage by http://vz.to/V4epNo
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
    the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
    The system cannot find the file specified
    Cannot connect to COWBOYS.
    Here are the technical details===================================
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
    Error Number: 2
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    ===================================
    The system cannot find the file specified
    I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
    Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
    many times and cannot connect to my local DB. 
    How do I connect to my Local DB? 
    Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
    instance ID from name). Please uninstall then re-run setup to correct this problem.
    I would happily re install it, if it wasn't my 20th time.
    I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
    May be the solution is very simple, but I am too frustrated. 
    Some of the things I have tried:
    From a command prompt, enter one of the following commands:
    net start "SQL Server Agent (MSSQLSERVER)" OR 
    net start "SQL Server Agent(instancename)"(for instance)
    on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
    Details
    Product:
    SQL Server
    ID:
    2
    Source:
    MSSQLServer
    Version:
    10.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Version:
    9.0
    Component:
    SQLEngine
    Message:
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
    40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
    Explanation
    SQL Server did not respond to the client request because the server is probably not started.
    User Action
    Make sure that the server is started.
    Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
    server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
    How Can i solve this?

    1. Make sure SQL Server Service is running
    2. If a named instance, make sure SQL Server browser service is running
    3. Make sure SQL Server is configured to allow remote connections
    4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
    5. Test server connectivity with PING from the client machine
    6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine.  For example
    a. TELNET <server-name> 1433
    b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
    7. Check firewall settings if step 5 or 6 connectivity test fails
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • This OC4J is configured to make JMX connections via RMIS...error!

    Hello,
    I have just installed OBIEE and when I try to log into Oracle Enterprise Manager 10g and got the following error:
    This OC4J is configured to make JMX connections via RMIS and fall back to RMI if the RMIS port is not configured. The RMIS connection on the OC4J local instance is configured but a connection could not be established. The JMX protocol is specified by the oracle.oc4j.jmx.internal.connection.protocol property in opmn.xml
    I have tried to reinstall OBIEE a couple of times but still get this error. Please let me know what I need to do to get this up and running.
    Thanks!
    Linda

    This may be because of the host name. You might have any special characters in host name, remove any under scores in host name, restart computer and check it.
    if not let me know what URL you are using.
    - Madan

  • I have been using iTunes for years to connect to radio and just recently tried to get on and sign pops up stating " A error occurred while contracting the radio tuning service. Check your internet connection or try again later "  I do but the same respons

    I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?

    You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes.  No, Apple makes no comment about this kind of thing.  It may reappear, it may not (it has been dead for over a week now).  Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without.  You can still open streams if you can get the URL, and you can then save them as playlist items.

  • My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

Maybe you are looking for

  • TS2570 Brand new iMac issues?

    And if you have this issue with a brand new (one week old) iMac? Do you also have to do al these things trying to fix it? Or does Apple take back the 'old' iMac and immediately changes this for a new one?

  • Reactive debugging in UCCX 7.0.1

    Hi All, Last couple days I've had this weird issue happening with IPCC. I've tried to debug couple of scripts, but they never get triggered, it's like application does not get triggered at all. Although I call the trigger and it plays menu and actual

  • Bring back an expired project

    bring back an expired project in Dreamweaver

  • BW 7.0 to 7.3 upgrade-Post upgrade activity and Transport the changes

    Hi Experts, We have upgraded our BW system from Release 7.0 to 7.3. As part of Security post upgrade activity I ran Migration steps, RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3. and later SU25 steps too. I fixed the Roles appea

  • Installed itunes 11 no "in the store" under album view

    Hi there. I`ve installed itunes 11 and in album view when i expand the album, there is no "Songs" "in the store" options on the right? Any ideas? Many thanks.