CONFIGURATION COLLECTION from unix hosts

Hi!
Finally Enterprise Manager 10g grid control is installed on SLES9-SP1 and all databases/listeners/agents/hosts are attached.
We have database-servers on different OS. The configuration collection of the unix-hosts fails with with error: Cannot capture snapshot.
The one and only windows database server succeeds in sending his configuration collection :-(
Any ideas?
Best regards,
Stephan

Now question is, does this means that we canenforce
garbage collection? Not sure. Maybe.
if not then what it this?Usually a request for GC to run. Whether it wants to
is a different question.
if yes how can i automate this in my application.Just don't. What for? The JVM won't return unused
memory to the OS anyway.I liked your answer better... i think you are right..
I want to assign some dukes to you.. but when ever i click on my dukes i get error for page not found.. could you please tell me how can i send you some duke $s.
thanks

Similar Messages

  • PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host

    after formating  when tryed to install software to the target  this Error Shown
    NI PXi 8108
    The Selcted Target does not support this function 
    when I try to add PXi chassis this Error Shown
    PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host
    Help me!

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • AD Authentication Not Working From Unix

    I am implemeting sp3 for my custom built Java application where I am using AD authentication. I tested everything in Windows environment and is working fine but same code when running from UNIX server, it is throwing below error.
    KrbException: Identifier doesn't match expected value (906)
         at sun.security.krb5.internal.af.a(DashoA6275:134)
         at sun.security.krb5.internal.ae.a(DashoA6275:63)
         at sun.security.krb5.internal.ae.<init>(DashoA6275:58)
         at sun.security.krb5.KrbTgsRep.<init>(DashoA6275:49)
         at sun.security.krb5.KrbTgsReq.getReply(DashoA6275:222)
         at sun.security.krb5.internal.az.a(DashoA6275:299)
         at sun.security.krb5.internal.az.a(DashoA6275:111)
         at sun.security.krb5.Credentials.acquireServiceCreds(DashoA6275:495)
         at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:580)
         at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
         at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
         at com.crystaldecisions.sdk.plugin.authentication.secwinad.internal.e.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAs(Subject.java:320)
         at com.crystaldecisions.sdk.plugin.authentication.secwinad.internal.d.a(Unknown Source)
         at com.crystaldecisions.sdk.plugin.authentication.secwinad.internal.d.startLogin(Unknown Source)
         at com.crystaldecisions.sdk.occa.security.internal.t.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.security.internal.t.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.security.internal.t.userLogon(Unknown Source)
         at com.crystaldecisions.sdk.occa.security.internal.l.userLogon(Unknown Source)
         at com.crystaldecisions.sdk.framework.internal.d.logon(Unknown Source)
         at com.perceptive.ssi.bo.reportrequest.ReportRequestManagerImpl.getEnterpriseSession(ReportRequestManagerImpl.java:668)
    I did lots of google but no luck.
    My application is hosted on Tomcat 5.0 in Unix and SP3 BO environment is setup in Windows.
    Any help will be appreciated.

    Well, you can open a support case with SAP.
    But the recommendation I or another person in the SDK team would give you will be to deploy and configure Java InfoView on the same app server, and engage the authentication support team to get it working.
    Then copy the authentication config to your custom app.
    There's a reason why SAP BusinessObjects support has a specialized support group for authentication issues - it's better than banging my - or your - head against Kerberos config issues.
    Java InfoView will use the same framework as your custom app.
    Sincerely,
    Ted Ueda

  • Call Oracle Forms 6i from UNIX

    Hi,
    I am new to Oracle forms and I have some querries -
    I have a form created on windows environment (.fmb/.fmx). This form accepts a parameter in a text field and calls another Oracle Report. Now my questions are:
    1. If windows forms are not compatible with UNIX environment, then how these are converted to be compatible with UNIX/Linux (without re-creating them on different platform)?
    2. Can I call the same form from UNIX shell with input as a shell script input?
    3. And if answer to the second query is no, then can I invoke Web deplyed froms (on application server) using shell? and how..
    I w'd appreciate your help!
    Regards.

    hello
    please provide forms6i (on web?,client server?),OS version.
    im Assumed your using character mode.
    user9040817 wrote:
    Hi,
    I am new to Oracle forms and I have some querries -
    I have a form created on windows environment (.fmb/.fmx). This form accepts a parameter in a text field and calls another Oracle Report. Now my questions are:
    1. If windows forms are not compatible with UNIX environment, then how these are converted to be compatible with UNIX/Linux (without re-creating them on different platform)?you need to generate fmx on server side. this is character mode. use : f60gen yourforms.fmb username/password@tns > a
    yes you can call it forms use : f60run forms.fmx username/password@tns
    report : rwrun60c yourreportname.rdf username/password@tns destype=file desname=a.lis
    but always use HOST command inside the forms, also to send to the printer name that is configured to your server.
    host ('rwrun60c /dsk8/ciame/rcption/wagih/reportname xxx/xxxn@xxx batch=yes destype=file desname=$user_output/'||to_char(:blk1.office_emp_no)||'.lis tty_office_no='||to_char(:blk1.office_no)||' tty_emp_no='||to_char(:blk1.office_emp_no)||' tty_rcpt_no='||to_char(:blk2.rcpt_mst_receipt_no)||' tty_rpt_type=0;
    lp -d $lp01 -c $user_output/'||to_char(:blk1.office_emp_no)||'.lis',NO_PROMPT);
    and if you call another form then you can use open_form,call_form,,... inside the form. Be sure you add in the library your wroking folder.
    edit your user profile .
    Study this as a case : this is the profile of our mis user in our old character based system.
    SunOS 5.9
    |-----------------------------------------------------------------|
    | This system is for the use of authorized users only. |
    | Individuals using this computer system without authority, or in |
    | excess of their authority, are subject to having all of their |
    | activities on this system monitored and recorded by system |
    | personnel. |
    | |
    | In the course of monitoring individuals improperly using this |
    | system, or in the course of system maintenance, the activities |
    | of authorized users may also be monitored. |
    | |
    | Anyone using this system expressly consents to such monitoring |
    | and is advised that if such monitoring reveals possible |
    | evidence of criminal activity, system personnel may provide the |
    | evidence of such monitoring to law enforcement officials. |
    |-----------------------------------------------------------------|
    login: ciame
    Password:
    Last login: Tue Mar 6 09:39:32 from 0.0.0.0
    Sun Microsystems Inc. SunOS 5.9 Generic May 2002
    $ bash
    bash-2.05$ cd mis
    bash-2.05$ cat .profile
    # This is the default standard profile provided to a user.
    # They are expected to edit it to meet their own needs.
    #MAIL=/usr/mail/${LOGNAME:?}
    DISPLAY=8.4.2.5:0.0;export DISPLAY
    NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6; export NLS_LANG
    NLS_DATE_FORMAT=dd/mm/yyyy;export NLS_DATE_FORMAT
    TK6_PRINTER=alp35;export TK6_PRINTER
    EDITOR=/usr/bin/vi;export EDITOR
    ORACLE_BASE=/oracle; export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/dev6i; export ORACLE_HOME
    TNS_ADMIN=$ORACLE_HOME/network/admin; export TNS_ADMIN
    HOME=$ORACLE_HOME/bin;export HOME
    ORACLE_SID=JMH; export ORACLE_SID
    ORACLE_TERM=vt220; export ORACLE_TERM
    FORMS60_TERMINAL=$ORACLE_HOME/bin; export FORMS60_TERMINAL
    LD_LIBRARY_PATH=LD_LIBRARY_PATH:$ORACLE_HOME/bin:$ORACLE_HOME/lib:/usr/dt/lib:/u
    sr/openwin/lib:/usr/lib:$ORACLE_HOME/network/jre11/lib/sparc/native_threads; exp
    ort LD_LIBRARY_PATH
    SHLIB_PATH=$ORACLE_HOME/bin:/usr/dt/lib:/usr/openwin/lib:/usr/lib:$ORACLE_HOME/n
    etwork/jre11/lib/sparc/native_threads; export SHLIB_PATH
    PATH=/usr/ccs/bin:$ORACLE_HOME/bin:/usr/bin:/usr/openwin/bin/; export PATH
    user_output=/user_account/mis;export user_output
    alias ls='ls -aF'
    umask=022
    lp01=alp1;export lp01
    lp02=alp1;export lp02
    lp03=alp1;export lp03
    lp04=alp1;export lp04
    lp05=alp1;export lp05
    lp06=alp1;export lp06
    lp07=alp1;export lp07
    lp08=alp1;export lp08
    lp09=alp1;export lp09
    lp10=ps401;export lp10
    lpc=alp1;export lpc
    cd /dsk8/ciame
    f60run mis_menu xxxx/xxx@xxx
    exit
    Edited by: ck on Mar 5, 2012 11:05 PM
    Edited by: ck on Mar 5, 2012 11:08 PM

  • Change from Actual Host Name to a DNS alias

    Here is our current standalone Oracle Application Server 10g configuration:
    Platform
    UNIX Owner = ora10g (all services run from this account)
    Red Hat Enterprise Linux AS release 4
    All services run from this host
    Database version 10.2.0.4.0
    Infrastructure
    Version = 10.1.2.3
    Installation Type Identity Management
    OHome = /ins01_app01/oracle/oraInfra
    UNIX Owner = ora10g
    MiddleTier
    Version = 10.1.2.3
    Installation Type = Business Intelligence and Forms
    OHome = /ins01_app01/oracle/oraMidtier
    Only two mid tier components contain apps we use:
    Discoverer Viewer (integrated with EBS) and OC4J_Portal (for Web Services).
    I’m new at this so please bear with me. I want to change the URL from the actual host name to a DNS alias. For example, the current URL for Discover Viewer:
    https://actualhost.dom.com/discoverer/viewer
    I want to change the URL to use a DNS alias, such as this:
    https://devhost.dom.com/discoverer/viewer
    I have reviewed the following documentation on how I might accomplish this task:
    Oracle® Application Server Administrator's Guide 10g Release 2 (10.1.2)
    Chapter 8 Changing Network Configurations
    8.2.2 Changing the Hostname, Domain Name, or IP Address of a Middle-Tier Installation
    ID 734821.1 - chgiphost.sh Fails with java.lang.UnsatisfiedLinkError Can't find library pass (libpass.so or .so) in
    sun.boot.library.path or java.library.path
    However, there are some questions I want to resolve before proceeding:
    1) Am I on the correct path with section “8.2.2 Changing the Hostname”
    2) How can I confirm the middle-tier instance is registered with Oracle Internet Directory and therefore must supply the orcladmin password during this procedure.
    3) Are there any specific to our installation that I might be missing.
    Thanks,
    Pat

    1. Yes you are on the right track.
    2. You can confirm by going to AS Control Console for Midtier; click on Infrastructure link, among the top left links; and see which OID it points to.
    3. you seem to be having it all.
    AMN

  • VLAN - require any configuration on server side/host level ?

    Hi all,
    I always thought VLAN separate broadcast domain, and create "virtual" LANs across 1 physical switch.
    Also, it is a configuration to be done on the network switch side, any packet that goes into a VLAN interface, will be tagged automatically according to the VLAN it is connected.
    ==============================================================
    However from the link below ->
    http://www.linuxhorizon.ro/vlans.html
    It seems like VLAN is done on the server side/host OS as well.
    ===============================================================
    Q1) can i confirm if we need to set any configuration on OS level for VLANs ? If no, what is the link above trying to achieve ?
    Regards
    Noob

    With a normal client connection, as CF says, there is no need for any special vlan configuration on the host.
    However I think that link is referring to using a trunk from the host to the switch.
    Hopefully you read my other response before this one but when I talk about trunk above I'm not talking about how Unix refers to a trunk, I am using Cisco terminology.
    A trunk in Cisco terminology is a link that can carry traffic for multiple vlans. And you can run a trunk to a host device and then that device can send and receive traffic for multiple vlans.
    It's not often done with PCs but it is more common with servers although a lot of servers still are only a member of one vlan.
    Without wishing to confuse you a common setup in the Cisco world is an etherchannel trunk between switches ie. a single logical link made up of multiple physical links that can carry traffic for multiple vlans.
    Jon

  • Unable to retrieve collections from the Search Service.

    Hi,
    I have a user trying to upload a collection. She gets the
    following error:
    Unable to retrieve collections from the Search Service.
    Please verify that the ColdFusion MX Search Server is
    installed and running.
    Obviously, I checked the service. It was running. I restarted
    the service. That did nothing. I restarted all the CF services.
    Didn't fix the issue. I also rebotted the server, not expecting
    that to work. It didn't.
    Checking the server logs, I see this:
    The description for Event ID ( 105 ) in Source ( ColdFusion
    MX 7 Search Server ) cannot be found. The local computer may not
    have the necessary registry information or message DLL files to
    display messages from a remote computer. You may be able to use the
    /AUXSOURCE= flag to retrieve this description; see Help and Support
    for details. The following information is part of the event:
    ColdFusion MX 7 Search Server.
    Also, after talking to my co-worker more, it turns out this
    occurred right after she uploaded a new collection to the
    administrator. This link sounds similar to what I'm experiencing:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=6c6881a9
    Maybe it's a corrupt collection?
    but I don't see any errors in the log
    (:\CFusionMX7\verity\Data\services\ColdFusionK2_indexserver1\log\status.log)
    Finally, there are some errors in the Verity service, and it
    looks like the Verity service Verity K2Server (Version 2.20pr6)
    points to D:\CFusionMX\lib\k2server.exe, which doesn’t exist
    anymore because we’ve upgraded to MX7.I'm not sure if this is
    an old service left over from before we upgraded from CFMX to
    CFMX7.
    We are running CFMX7 on a Windows 2003 Server SP1 if that
    matters.
    Thanks in advance for any help.

    In the left hand panel of the ColdFusion Administrator expand
    the Data & Services link. Then select the Verity K2 Server
    link. Change localhost to 127.0.0.1 in the Verity Host Name
    textbox.
    Ted Zimmerman

  • Cannot connect to EM on ODD guest from Windows host

    Hello,
    I cannot connect to the Enterprise Manager in my guest VM from my host. From a IE v8.0 browser, the recommended link https://192.168.56.101:1158/em fails to connect.
    I installed Oracle VM VirtualBox 4.0.4 on a Windows 7 laptop and imported the Oracle Developer Days (ODD) VM appliance. Within the ODD VM I started Enterprise Manager with the cmd "emctl start dbconsole". I confirmed the listener is up and running in the ODD VM.
    I checked my Windows Firewall and the MS Telnet Client is allowed through on IP 192.168.56.101 on local port 1158.
    Suggestions?
    Cheers,
    David

    Apple Support could reproduce the problem, and provided the solution:
    Assuming that VNC is configured in the sharing prefs (under Apple Remote Desktop), it is enough to disable ARD in the sharing prefs. Once you do this (presumably via Apple Remote Desktop) you'll obviously lose your connection.
    To restart ARD again from the commandline, connect to your server with ssh and issue the following commands:
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
    now you should be able to connect to your server with ARD again....
    .... and all connections with VNC should work as well!!
    splendid, thanks apple support!

  • Campus Manager No Data Collected from Network

    Just intergraged CiscoWorks with ACS.  Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
    No Data Collected from Network
    1.Devices are not availiable from DCR or
    2.You have not performed data collection at least once
    When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
    We could see devices fine before the ACS intergration but now, we cannot see any devices.
    Any thoughts?

    The devices (original clients) that I defined are as follows:
    10.0.1.*
    10.0.10.*
    10.0.2.*
    I was able to see these clients.  Deleted the above clients from ACS and added:
    10.0.1-10.*
    So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
    I can still see the original clients only.  The others show up in Devices not configured in ACS report.
    What do I need to do?  What did I miss?

  • Crawl issue - warning: "This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of ....a start address"

    Hello all,
    I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
    One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
     web app)
    Crawl everything under the hostname for each start address has been selected when creating this content source.
    Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
    After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
    individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
    The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
    Thanks in advance
    Regards
    Baldo

    Baldo,
    In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
    the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
    For Example:
    1st Content Source:
    http://servername/ as a start address would now become
    http://servername/site1
    http://servername/site2
    2nd Content Source:
    http://servername/site3
    Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
    ScottC - Microsoft SharePoint Support

  • Oracle E-Business Suite access from the Host machine

    Hellow,
    Please, after installing E-Business Suite and going through Post-configuration details, I would like to get access of my applications portal from the host system.
    I have tried several ways of doing that and would not know the steps to follow in order to access the portal directly from the physical host machine.
    I took the normal steps as when configuring end users and can ping the virtual machine from the Host system but can't do the same form the virtual machine of the host machine.
    I can ping another server and other machines int he same network but not the one on which the virtual machine is installed.
    Regards,
    N.M
    Edited by: user650358 on 17-Feb-2010 07:21

    Hi,
    I am confused first clear what is hostmachine and what is virtual machine.....
    call the machine which will access the application on virtual machine as CLIENT
    call the machine which is hosting the virtual machine a VIRTUAL MACHINE HOST
    call virtual machine as VIRTUAL MACHINE
    You mean I should change my host IP? It has so many applications using that localhost name.Is ther any setting done in the network and have you ever accessed an application installed on Virtual machine from the host machine?>
    changing of ip doesnt have any impact if ur applications are using hostname..if they are using ip then there is a issue,Yes i have acces EBIZ installed on virtula machine many times.
    And if ur working in a organization then ask ur network admins to check whats the issue..may be some were firewall issue also ..thats why i asked u to chnage ip.
    Regards

  • How to get safecontrol tag section to a collection from web.config in c#

    how to  get safecontrol tag section to a collection from web.config in c#
    Below is my config file. I need to read the safecontrol tagsection and get all those in to a collection.please help me on this.
    <?xml
    version="1.0"
    encoding="UTF-8"
    standalone="yes"?>
    <configuration>
    <SafeControls>
    <SafeControl
    Assembly="System.Web,
    Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
    Namespace="System.Web.UI.WebControls"
    TypeName="*"
    Safe="True"
    AllowRemoteDesigner="True"
    SafeAgainstScript="False"
    />
    <SafeControl
    Assembly="System.Web,
    Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
    Namespace="System.Web.UI.HtmlControls"
    TypeName="*"
    Safe="True"
    AllowRemoteDesigner="True"
    SafeAgainstScript="False"
    />
    </
    SafeControls>
    </configuration>
    adityadugyala

    Here is the way to read and write custom sections programtically in web.config.
    http://msdn.microsoft.com/en-us/library/2tw134k3.aspx
    Or use the traditional way of reading XML with XMLDocument.
    Bala

  • Infor regarding Collections from customers

    Dear SAP gurus
    goodmorning
    as I need some information regarding Accounts Receivable.
    our client is distributing power to customers and receives the collections from the customers/consumers. Now the issues is that if a customer is not paid the bill amount (became defaultee) for the past two months and also for the current month.  In the current month he paid some amount towards the settlement of arrears. We are planing to charge interest for the arrears of bill amout and it should show as open item.
    Where should I configure these settings and assign them.
    Is it possible to configure at the payment terms and assign a new GL account with the arrears of interest.
    thanks in advance
    pls suggest me in this issue
    thanks and regards
    Kishore
    Hyderabad

    Hi,
    Please check with these reports.
    S_ALR_87012177 - Customer Payment History
    S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
    Thanks
    Prasada

  • How to connect to oracle9i database from Unix

    Hi All,
    How can i connect to remote oracle9i database(windows based) from Unix. I have following server information Server IP, Username , Userpassword , DataBase name.Do i need any other information to connect to server?
    How can i connect database from Putty?
    Do i need to install SQL on the Unix to connect to oracle server?
    and which C/C++ API i have to use to access tables from the remote oracle server?
    please help me i am new to oracle .
    Thanks in advance.

    Oracle generally uses a special set of software, commonly called the SQLNet or Oracle Networking, as a layer to provide a connection between the client and the database server.
    In general terms,
    - the client software (perhaps sqlplus, an application, ODBC) calls Oracle Networking on the client computer and says "please connect to database known as 'x'";
    - Oracle Networking translates the request, often by looking up 'x' in the TNSNAMES.ORA file at the client side, to get the host name, the port the Oracle listener is waiting on, and the name of the database service to access;
    - Oracle Networking contacts the computer on the required port. If the listener is there, the Oracle Networking client asks for a connection to the database service;
    - The Listener (if it recognizes it) asks the database service for a 'server process';
    - The database starts up a server process which grabs a network port and tells the listener which port was obtained;
    - The listener tells Oracle Networking on the client which port to use;
    - The client disconnects from the Listener, and reconnects at that port;
    - The server process starts authentication and session initialization, after which we are good to go.
    In answer to your questions:
    1) How can i connect database from Putty?
    That implies you want to telnet to the Windows box and run the client stuff locally on the Windows box. So that means you need to look at telnet or ssh documentation - this has nothing to do with Oracle.
    2) Do i need to install SQL on the Unix to connect to oracle server?
    Not really. It does mean you might want to install an Oracle CLIENT (see the download section of http://otn.oracle.com) which will initiate the sequence as above.
    A different sort of client is SQL Developer, a Java-based GUI with it's own built-in Oracle Networking, that displays database stuff. That is also offered by Oracle at the same download page.
    3) and which C/C++ API i have to use to access tables from the remote oracle server?
    Oracle provides a C/C++ API as a pre-processor, called Pro*C. I suspect this si way beyond what you want right now.
    4) please help me i am new to oracle .
    Please, please, please, please, please ..... please .... purchase and read http://www.oreilly.com/catalog/oressentials3/

  • Database shifting from UNIX to WINDOWS

    Hi,
    We have a production server located at Suse UNIX.
    We would like to move database from UNIX to WINDOWS.
    I would like to know what are the difficulties/scenarios which occures while moving the database?
    How difficult is it to import current oracle database to oracle on windows server ?
    Please explain in details.
    Thanks,

    hi what is your version of database?
    are you chaging the database version also or simply operating system?
    if you are only changing OS, then exp/imp is the best option. but to acheive this you need to do some groundwork like collecting all the tablespaces information and schemas and their privileges etc.
    also depends on database size also you can choose come other options.
    if your database version is 10g then you can best use the option of datapump exp/imp or network_link parameter of datapump.

Maybe you are looking for