Configuration Design question

I have main site and remote sites connected via VPN (sometimes unreliable). I understand that i should not install another management server in remote site due to the management servers should be close to each other and are in the same management
group and pool for servers or pool for network devices.
How can I separate each site to monitoring itself and each other? For example, I would like Remote Site to have it's own set of SCOM componenets independent of main site so it's monitoring from its network but report everything back to the main site.
If main site is not available, remote site will operate and alert independently.
Can the separate management group use its own management and sql servers? insteaded of remote management servers connecting to main site's sql db.

Use the Connected Management Group
http://technet.microsoft.com/en-us/library/hh230698.aspx
Juke Chou
TechNet Community Support

Similar Messages

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

SCA design question - PIX and SCA with dual logical SSL server.

I have a SCA design question. please correct or verify my solution.
1. connectivity.
<Client with port 443>--<ISP>--<PIX>--<SCA>--<SERVER(two IP on single NIC and each IP associates to WEB server) with port 81>
* client will access WEB server with x.x.1.100 or x.x.1.101
2. physical IP address
- PIX outside=x.x.1.1
- PIX inside=x.y.1.1
- SCA device=x.y.1.2
- SERVER NIC1=x.y.1.10
- SERVER NIC2=x.y.1.11
3. PIX NAT
- static#1=x.x.1.100 map to x.y.1.10
- static#2=x.x.1.101 map to x.y.1.11
4. SCA configuration.
mode one-port
no mode one-port
ip address x.y.1.2 netmask 255.255.255.0
ip route 0.0.0.0 0.0.0.0 x.y.1.1
ssl
server SERVER1
ip address x.y.1.10
localport 443
remoteport 81
server SERVER2
ip address x.y.1.11
localport 443
remoteport 81
Thanks,

The document http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/scacfggd/ has a link to a page which describes how to use the configuration manager command line interface to configure the Secure Content Accelerator. Several configuration examples are also included in this page.

Database Connection design question

Hello, I have a design question. Awhile back I needed to create a database connection to SQL Server, so I created a class to do it
import java.sql.*;
import java.io.*;
import java.net.MalformedURLException;
import org.w3c.dom.Document;
import org.w3c.dom.*;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
public class SQLServerConnection
     private static Connection connection = null;
     public SQLServerConnection(String user, String password, String dbName) throws java.sql.SQLException
          getDBConnection(user, password, dbName);
     public SQLServerConnection(String configFileName) throws java.sql.SQLException
          getDBConnection(configFileName);
     private void getDBConnection(String user, String password, String dbName) throws java.sql.SQLException
         DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
         connection = DriverManager.getConnection(
              "jdbc:microsoft:sqlserver:" + dbName, user, password);
     private void getDBConnection(String configFileName) throws java.sql.SQLException
          String user;
          String password;
          String dbName;
          try
               DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               DocumentBuilder db = factory.newDocumentBuilder();
               Document doc = db.parse(configFileName);
               doc.getDocumentElement().normalize();
               // get the configuration information
               password = getConfigParameter("password", doc);
               user = getConfigParameter("username", doc);
               dbName = getConfigParameter("databasename", doc);
               getDBConnection(user, password, dbName);
          catch (MalformedURLException murle)
               System.out.println("Unable to connect to: " + configFileName + " -- " + murle);
               System.exit(1);
          catch (FileNotFoundException fnfe)
               System.out.println("Configuration file " + configFileName + " not found.");
               System.exit(1);
          catch (IOException ioe)
               System.out.println("IOException: " + ioe);
               System.exit(1);
          catch (javax.xml.parsers.ParserConfigurationException pce)
               System.out.println ("Parser Configuration Error: " + pce);
          catch (SAXException saxe)
               System.out.println ("SAXException: " + saxe);
     private String getConfigParameter(String paramName, org.w3c.dom.Document doc)
          NodeList nl = doc.getElementsByTagName(paramName);
          if(nl != null)
               Node n = null;
               for (int i = 0; i < nl.getLength(); i++)
                    n = nl.item(i);
                    if(n.hasChildNodes())
                         NodeList children = n.getChildNodes();
                         return ((Node)children.item(0)).getNodeValue();
          else
               System.out.println ("nl is null");
          return "";
     public void setCatalog(String catalogName) throws java.sql.SQLException
          connection.setCatalog(catalogName);
     public Connection getConnection()
          return connection;
     public void closeConnection()
          try
               connection.close();
          catch(java.sql.SQLException sqle)
               System.err.println ("SQL Server Connection failed to close: " + sqle);
}Later on, I needed to do the same thing for MySQL, so I created a class for that, MySQLServerConnection which is exactly the same as above, except for:
private void getDBConnection(String user, String password, String dbName) throws java.sql.SQLException
          try
               Class.forName("com.mysql.jdbc.Driver").newInstance();
               connection = DriverManager.getConnection(dbName, user, password);
          catch(java.lang.ClassNotFoundException cnfe)
               System.out.println (cnfe);
          catch(java.lang.InstantiationException ie)
               System.out.println (ie);
          catch(java.lang.IllegalAccessException iae)
               System.out.println (iae);
     }Later, on, I did the same thing with OracleServerConnection. My question is, I know this is probably not optimal code. For example, I didn't originally have a close connection method, so I had to go in and code one for all 3. I'm assuming that an interface would be a good idea so that if I have to code another database connection class I make sure and include all of the appropriate methods. I'm also assuming that it would have been smart to have a master class, maybe something like DatabaseConnection and extended these classes from that. Am I on the right track? Totally offbase?

@nclow - I will work on trying the Factory Pattern for this over the weekend and post when I finish to see what you think.
@abillconsl - just to make sure I understand, you're saying that I just try to connect and it will cycle through the different database connection possibilities and connect when it finds the right one? If it fails all 3, log an appropriate message. One question I have about this is, I thought I was being object oriented by separating the different types of db connections (Oracle, SQL Server, MySql) into different classes. Am I missing the point of OOP by what I was/am trying to accomplish? Going overboard? Also, does your way try and connect to all 3 even if I connected to one already?
Thx, Grantarchy
Edited by: grantarchy on May 9, 2008 9:50 PM

Catalyst 3850 Stack VLANs, layer 2 vs. layer 3 design question

Hello there:
Just a generic, design question, after doing much reading, I am just not clear as when to use one or the other, and what the benefits/tradeoffs are:
Should we configure the switch stack w/ layer 3, or layer 2 VLANs?
We have a Catalyst 3850 Stack, connected to an ASA-X 5545 firewall via 8GB etherchannel.
We have about 100 servers (some connected w/ bonding or mini-etherchannels), and 30 VLANs.
We have several 10GB connections to servers.
We push large, (up to) TB sized files from VLAN to VLAN, mostly using scp.
No ip phones, no POE.
Inter-VLAN connectivity/throughput and security are priorities.
Originally, we planned to use the ASA to filter connections between VLANs, and VACLs or PACLs on the switch stack to filter connections between hosts w/in the same VLAN.
Thank you.

If all of your servers are going to the 3850 then I'd say you've got the wrong switch model to do DC job. If you don't configure QoS properly, then your servers will start dropping packets because Catalyst switches have very, very shallow memory buffers. These memory buffers get swamped when servers do non-stop traffic.
Ideally, Cisco recommends the Nexus solution to connect servers to. One of the guys here, Joseph, regularly recommends the Catalyst 4500-X as a suitable (and financial) alternative to the more expensive Nexus range.
In a DC environment, if you have a lot of VM stuff, then stick with Layer 2. V-Motion and Layer 3 don't go hand-in-hand.

Design question about instant download from

Hi All,
Here is a design question for you:
Background:
The application we built is being upgraded from time to time and we send it to our users.
our users use it on a network so there is only one file to upgrade (and being done by the sys admin)
We send them a �patch�; actually, it�s a new version of the application they place it in the relevant folder and continue to work with a new version.
Problems:
1. We send them the patch via email - sometimes it takes a while until they read their email and at they are using an �old version of the system�.
2. Some of them are not computer savvy (when it�s not the sys admin) and we need to guide them as where exactly to place the file (there are 3 files)
Our (conceptual never build yet) Solution:
Build a program just like Norton antivirus (or other) that prompts the user from the task bar (next to the clock) that a new version is available and by
clicking once it will automatically download the file and store it in the correct folder.
Question:
1. Did anyone try anything like this before (or something like) who can tell me about it?
2. Do you think this kind of system will work for us?
3. Does anyone have a better solution?
Thanks
Peter

Java WebStart is the deployment technique suited for your purposes.
The deployment will be done via a webserver running a jnlp servlet (provided).
The applications may either run offline, or check online for automatic updates.
You have several configuration options.
ArgoUML and jEdit are two open source apps delivered this way.
Your app will need to be adapted though.
And your customers need an online browser with installed jvm.

Design question: Scheduling a Variable-timeslot Resource

I originally posted this in general java programming, because this seemed like a more high-level design descussion. But now I see some class design questions. Please excuse me if this thread does not belong here (this is my first time using the forum, save answering a couple questions).
Forum,
I am having trouble determining a data structure and applicable algorithm (actually, even more general than the data structure -- the general design to use) for holding a modifiable (but more heavily read/queried than updated), variable-timeslot schedule for a given resource. Here's the situation:
Let's, for explanation purposes, say we're scheduling a school. The school has many resources. A resource is anything that can be reserved for a given event: classroom, gym, basketball, teacher, janitor, etc.
Ok, so maybe the school deal isn't the best example. Let's assume, for the sake of explanation, that classes can be any amount of time in length: 50 minutes, 127 minutes, 4 hours, 3 seconds, etc.
Now, the school has a base operation schedule, e.g. they're open from 8am to 5pm MTWRF and 10am to 2pm on saturday and sunday. Events in the school can only occur during these times, obviously.
Then, each resource has its own base operation schedule, e.g. the gym is open from noon to 5pm MTWRF and noon to 2pm on sat. and sun. The default base operation schedule for any resource is the school which "owns" the resource.
But then there are exceptions to the base operation schedule. The school (and therefore all its resources) are closed on holidays. The gym is closed on the third friday of every month for maintenance, or something like that. There are also exceptions to the available schedule due to reservations. I've implemented reservations as exceptions with a different status code to simplify things a little bit: because the basic idea is that an exception is either an addition to or removal from the scheduleable times of that resource. Each exception (reservation, closed for maintenance, etc) can be an (effectively) unrestricted amount of time.
Ok, enough set up. Somehow I need to be able to "flatten" all this information into a schedule that I can display to the user, query against, and update.
The issue is complicated more by recurring events, but I think I have that handled already and can make a recurring event be transparent from the application point of view. I just need to figure out how to represent this.
This is my current idea, and I don't like it at all:
A TimeSlot object, holding a beginning date and ending date. A data structure that holds list of TimeSlot objects in order by date. I'd probably also hold an index of some sort that maps some constant span of time to a general area in the data structure where times around there can be found, so I avoid O(n) time searching for a given time to find whether or not it is open.
I don't like this idea, because it requires me to call getBeginningDate() and getEndDate() for every single time slot I search.
Anyone have any ideas?

If I am correct, your requirement is to display a schedule, showing the occupancy of a resource (open/closed/used/free and other kind of information) on a time line.
I do not say that your design is incorrect. What I state below is strictly my views and should be treated that way.
I would not go by time-slot, instead, I would go by resource, for instance the gym, the class rooms (identified accordingly), the swimming pool etc. are all resources. Therefore (for the requirements you have specified), I would create a class, lets say "Resource" to represent all the resources. I would recommend two attributes at this stage ("name" & "identifier").
The primary attribute of interest in this case would be a date (starting at 00:00hrs and ending at 24:00hrs.), a span of 24hrs broken to the smallest unit of a minute (seconds really are not very practical here).
I would next encapsulate the availability factor, which represents the concept of availability in a class, for instance "AvailabilityStatus". The recommended attributes would be "date" and "status".
You have mentioned different status, for instance, available, booked, closed, under-maintainance etc. Each of these is a category. Let us say, numbered from 0 to n (where n<128).
The "date" attribute could be a java.util.Date object, representing a date. The "status", is byte array of 1440 elements (one element for each minute of the day). Each element of the byte array is populated by the number designation of the status (i.e, 0,1,2...n etc.), where the numbers represent the status of the minute.
The "Resource" class would carry an attribute of "resourceStatus", an ordered vector of "ResourceStatus" objects.
The object (all the objects) could be populated manually at any time, or the entire process could be automated (that is a separate area).
The problem of representation is over. You could add any number of resources as well as any number of status categories.
This is a simple solution, I do not address the issues of querying this information and rendering the actual schedule, which I believe is straight forward enough.
It is recognized that there are scope for optimizations/design rationalization here, however, this is a simple and effective enough solution.
regards
[email protected]

LDAP design question for multiple sites

LDAP design question for multiple sites
I'm planning to implement the Sun Java System Directory Server 5.2 2005Q1 for replacing the NIS.
Currently we have 3 sites with different NIS domains.
Since the NFS over the WAN connection is very unreliable, I would like to implement as follows:
1. 3 LDAP servers + replica for each sites.
2. Single username and password for every end user cross those 3 sites.
3. Different auto_master, auto_home and auto_local maps for three sites. So when user login to different site, the password is the same but the home directory is different (local).
So the questions are
1. Should I need to have 3 domains for LDAP?
2. If yes for question 1, then how can I keep the username password sync for three domains? If no for question 1, then what is the DIT (Directory Infrastructure Tree) or directory structure I should use?
3. How to make auto map work on LDAP as well as mount local home directory?
I really appreciate that some LDAP experta can light me up on this project.

Thanks for your information.
My current environment has 3 sites with 3 different NIS domainname: SiteA: A.com, SiteB:B.A.com, SiteC:C.A.com (A.com is our company domainname).
So everytime I add a new user account and I need to create on three NIS domains separately. Also, the password is out of sync if user change the password on one site.
I would like to migrate NIS to LDAP.
I want to have single username and password for each user on 3 sites. However, the home directory is on local NFS filer.
Say for userA, his home directory is /user/userA in passwd file/map. On location X, his home directory will mount FilerX:/vol/user/userA,
On location Y, userA's home directory will mount FilerY:/vol/user/userA.
So the mount drive is determined by auto_user map in NIS.
In other words, there will be 3 different auto_user maps in 3 different LDAP servers.
So userA login hostX in location X will mount home directory on local FilerX, and login hostY in location Y will mount home directory on local FilerY.
But the username and password will be the same on three sites.
That'd my goal.
Some LDAP expert suggest me the MMR (Multiple-Master-Replication). But I still no quite sure how to do MMR.
It would be appreciated if some LDAP guru can give me some guideline at start point.
Best wishes

Design question for database connection in multithreaded socket-server

Dear community,
I am programming a multithreaded socket server. The server creates a new thread for each connection.
The threads and several objects witch are instanced by each thread have to access database-connectivity. Therefore I implemented factory class which administer database connection in a pool. At this point I have a design question.
How should I access the connections from the threads? There are two options:
a) Should I implement in my server class a new method like "getDatabaseConnection" which calls the factory class and returns a pooled connection to the database? In this case each object has to know the server-object and have to call this method in order to get a database connection. That could become very complex as I have to safe a instance of the server object in each object ...
b) Should I develop a static method in my factory class so that each thread could get a database connection by calling the static method of the factory?
Thank you very much for your answer!
Kind regards,
Dak
Message was edited by:
dakger

So your suggestion is to use a static method from a
central class. But those static-methods are not realy
object oriented, are they?There's only one static method, and that's getInstance
If I use singleton pattern, I only create one
instance of the database pooling class in order to
cionfigure it (driver, access data to database and so
on). The threads use than a static method of this
class to get database connection?They use a static method to get the pool instance, getConnection is not static.
Kaj

SOA real-time design question

Hi All,
We are currently working with SOA Suite 11.1.1.4. I have a SOA application requirement to receive real-time feed for six data tables from an external third party. The implementation consists of five one-way operations in the WSDL to populate the six database tables.
I have a design question. The organization plans to use this data across various departments which requires to replicate or supply the data to other internal databases.
In my understanding there are two options
1) Within the SOA application fork the data hitting the web-service to different databases.
My concern with this approach is what if organizations keep coming with such requests and I keep forking and supplying multiple internal databases with the same data. This feed has to be real-time, too much forking with impact the performance and create unwanted dependencies for this critical link for data supply.2) I could tell other internal projects to get the data from the populated main database.
My concern here is that firstly the data is pushed into this database flat without any constraints and it is difficult to query to get specific data. This design has been purposely put in place to facilitate real-time performance.Also asking every internal projects to get data from main database will affect its performance.
Please suggest which approach should I take (advantage/disadvantage. Apart from the above two solutions, is there any other recommended solution to mitigate the risks. This link between our organization and external party is somewhat like a lifeline for BAU, so certainly don't want to create more dependencies and overhead.
Thanks

I had tried implementing the JMS publisher/subscriber pattern before, unfortunately I experienced performance was not so good compared to the directly writing to the db adapter. I feel the organization SOA infrastructure is not setup correctly to cope with the number of messages coming through from external third party. Our current setup consists of three WebLogic Servers (Admin, SOA, BAM) all running on only 8GB physical RAM on one machine. Is there Oracle guideline for setting up infrastructure for a SOA application receiving roughly 600000 messages a day. I am using SOA 11.1.1.4. JMS publisher/subscriber pattern just does not cope and I see significant performance lag after few hours of running. The JMS server used was WebLogic JMS
Thanks
Edited by: user5108636 on Jun 13, 2011 4:19 PM
Edited by: user5108636 on Jun 13, 2011 7:03 PM

Workflow design questions: FM vs WF to call FM

Hereu2019s a couple of workflow design questions.
1. We have Workitem 123 that allow user to navigate to a custom transaction TX1. User can make changes in TX1. At save or at user command of TX1, the program will call a FM (FM1) to delete WI 123 and create a new WI to send to a different agent.
Since Workitem 123 is still open and lock, the FM1 cannot delete it immediately, it has to use a DO loop to check if the Workitem 123 is dequeued before performing the WI delete.
Alternative: instead of calling the FM1, the program can raise an event which calls a new workflow, which has 1 step/task/new method which call the FM1. Even with this alternative, the Workitem 123 can still be locked when the new workflowu2019s task/method calls the FM1.
I do not like the alternative, which calls the same FM1 indirectly via a new workflow/step/task/method.
2. When an application object changes, the user exit will call a FMx which is related to workflow. The ABAP developer do not want to call the FMx directly, she wants to raise an event which call a workflow .. step .. task .. method .. FMx indirectly. This way any commit that happens in the FMx will not affect the application objectu2019s COMMIT.
My recommendation is to call the FMx using u2018in Update tasku2019 so that the FMx is only called after the COMMIT of the application object.
Any recommendation?
Amy

Mike,
Yes, in my first design, the TX can 1. raise a terminating event for the existing workitem/workflow and then 2. raise another event to call another workflow. Both 1 and 2 will be in FM1.
Then the design question is: Should the FM1 be called from TX directly or should the TX raise an event to call a new workflow which has 1 step/task, which calls a method in the Business object, and the method calls the FM1?
In my second design question, when an application object changes, the user exit will call a FMx which is related to workflow. The ABAP developer do not want to call the FMx directly, she wants to raise an event which call a workflow, which has 1 step/task, which calls a method, which calls the FMx indirectly. This way any commit that happens in the FMx will not affect the application objectu2019s COMMIT.
My recommendation is either call the FMx using u2018in Update tasku2019 so that the FMx is only called after the COMMIT of the application object or raise an event to call a receiver FM (FMx).
Thanks.
Amy

Method design question...and passing object as parameter to webserice

I am new to webservice...one design question
i am writing a webservice to check whether a user is valid user or not. The users are categorized as Member, Admin and Professional. For each user type I have to hit different data source to verify.
I can get this user type as parameter. What is the best approach to define the method?
Having one single method �isValidUser � and all the client web service can always call this method and provide user type or should I define method for each type like isValidMember, isValidAdmin ?
One more thing...in future the requirement may change for professional to have more required field in that case the parameter need to have more attribute. But on client side not much change if I have a single isValidUser method...all they have to do is pass additional values
isValidUser(String username, String usertype, String[] userAttributes){
if usertype == member
call member code
else if usertype = professional
call professional code
else if usertype = admin
call admin code
else
throw error
or
isValidMember(String username, String[] userAttributes){
call member code
One last question, can the parameter be passed as object in web service like USER object.

First of all, here is my code
CREATE OR REPLACE
TYPE USERCONTEXT AS OBJECT
user_login varchar2,
user_id integer,
CONSTRUCTOR FUNCTION USERCONTEXT (
P_LOGIN IN INTEGER
P_ID_ID IN INTEGER
) RETURN SELF AS RESULT
Either your type wont be compiled or this is not the real code..

Aggregation level - design question

Hi, All
we are in BI-IP ( Netweaver 2004s SPS16).
I have a design question for this scenario.
User needs to plan the amounts for a duration (start period and end period), Jan2008 -Dec2008 (001.2008, 012.2008) = 12000.
We need to distribute this to the periods equally. 001.2008 = 1000, 002.2008 =1000 .... 012.2008=1000.
If the user changes the period amounts, it should be reflected back in the duration amount.
Pl suggest the design for the aggregation levels to achieve this.
Thanks in advance.
velu

Hello Velu,
As the name also goes, creating an "aggregation level" will only result in "aggregation". What your requirement is, is called disaggregation or distribution - this cannot happen automatically - you will either have to use the feature in input queries or use the distribution planning function or create your own planning function using fox/exit.

Centralized WLC Design Question

Dears,
In my scenario, i am designing CEntralized WLC deployment. I have 30 AP in Buidling X(200 Users) and 20 AP in Buidling Y(150 Users). I am planning to install HA WLC CLuster where Pimary & Secondary WLC will reside in physically different Data Centers A & B.
I have a wireless Design Question and i am not able to get clear answers. Please refer to the attached drawing and answer the following queries:
If Buidling X users want to talk to building Y Users, then how Control & Data Traffic flow will happen between Buidling X & Y. Would all the traffic will go to Primary WLC from Bldg X APs first and then it will be Re Routed back to Buidling Y APs? Can i achieve direct switching between Bldg X&Y APs without going toward WLC?
If Building X & Y Users want to access the internet, how would be traffic flow? Would the traffic from X&Y AP will go tunnel all the traffic towards WLC and then it will be routed to internet gateway?is it possible for Bldg X&Y AP to directly send traffic towards Internet Gateway without going to controllers?
I have planned to put WLC at physically different locations in different DC A & B. Is it recommended to have such a design? What would be the Failver traffic volume if Primary WLC goes down and secondary controller takes over?
My Reason to go for Centralized deployment is that i want to achieve Centralized Authentication with Local Switching. Please give your recommendations and feedback
Regards,
Rameez

If Buidling X users want to talk to building Y Users, then how Control & Data Traffic flow will happen between Buidling X & Y. Would all the traffic will go to Primary WLC from Bldg X APs first and then it will be Re Routed back to Buidling Y APs? Can i achieve direct switching between Bldg X&Y APs without going toward WLC?
Traffic flows to the WLC that is the primary for the AP's, then its routed over your network.
If Building X & Y Users want to access the Internet, how would be traffic flow? Would the traffic from X&Y AP will go tunnel all the traffic towards WLC and then it will be routed to Internet gateway?is it possible for Bldg X&Y AP to directly send traffic towards Internet Gateway without going to controllers?
The WLC isn't a router, so you would have to put the Internet traffic an a subnet and route.
I have planned to put WLC at physically different locations in different DC A & B. Is it recommended to have such a design? What would be the Failover traffic volume if Primary WLC goes down and secondary controller takes over?
Like I mentioned... earlier, the two HA WLC has to be on the same layer 2 subnet in order for you to use HA. The guide mentions an Ethernet cable to connect both the HA ports on the WLC.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Dreamweaver design question

Hi all. I'm new to the forum and ha da design question. My site took about 3 weeks to complete and after finishing what I though was a pretty error free website I noticed that dreamwever 8 was coming up with numerous errors that matched http://validator.w3.org's scans. My question is this. Why does dreamwever ( regardless of the release ) allow the designer of the website he/she is creating without pointing out the errors as they go along with simple instructions on how to fx them. As an example My meta tags
<META NAME="keywords" CONTENT="xxxxxxx">
<META NAME="description" CONTENT="xxxxxxxx">
<META NAME="robots" CONTENT="xxxxx">
<META NAME="author" CONTENT="xxxxxx">
<META NAME="copyright" CONTENT="xxxxxx">
all had to be changed over to
<meta name="keywords" xxxxxxxxxxxxx">
<meta name="description" CONTENT="xxxxxxx">
<meta name="robots" CONTENT="xxxxxx">
<meta name="author" CONTENT="xxxxxxxx">
<meta name="copyright" CONTENT="xxxxxxxx">
all because dreamweaver didnt tell me that the <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
didnt fit the original design. Now my site ( if you wish to view the code ) is www.gamblingwhore.com and if you look at the page source you will see that the code has been corrected on dw 8 but still shows more than 30 errors on http://validator.w3.org. Does dreamwevaer not have the basic tool available to fix these errors without such hassle. Its not just my site either, many sites built in dreamwever can be checked with the http://validator.w3.org website only to find more than 20 -100 different errors.
Dream weaver creators need to focus on these errors because they hinder seo and they create alot of extra work
Thank you

The w3c and XHTML have come a ways since the release of Dreamweaver 8 (I used it in late 2004 and 2005).
Dreamweaver 8 will build transitional XHTML files as well as old style single tag HTML. It all depends on the personal preferences of the designer.
Just for kicks, go to say... 20 random websites and see just how many get a green light when you validate them. If its half, you're lucky. This page doesn't even validate;
Dreamweaver has the menu option (at least in CS3 an CS4) under the Commands menu to "Clean Up HTML" or "Clean Up XHTML" depending on what you're building. I make a point of running that command as I build along with Apply Source Formatting.
I also use a local validator program to check my code before putting anything.
That's why they call it WYSIWYG software.
If it did everything perfectly for everyone every single time, good web designers would find themselves out of work.

Configuration Design question

Similar Messages

Maybe you are looking for