Configuration details for RFID devices in warehouse while delivery

Please suggest me some configuration details for RFID devices in warehouse while delivery .
Regards,
Manish

I read the "Config" in "– Once the Non-Cisco Devices are moved to the managed state, it triggers the MIB II level of Inventory for Inventory, Config and Image Management support and data collection." as "config management", meaning any retrieval of configuration informations possible through polling MIB II.
OTOH, the "Config" in "– Config and SWIM functionalities are not supported. Only system and interface information (MIB II) is collected for Non-Cisco devices through Inventory." is probably referring to the act of deploying/pushing configurations to these non-Cisco devices.

Similar Messages

Configuration Details for GL account, Fund and Funds center

Hi All
I am executing budget report by using FMRP_RFFMEP1FX. In this report shows the fundcenter wise invoice details. As I execute the report with different fund center I am getting different output that is not match with actual one for that I want to know which transaction code maintains the fund, Fundcenter configuration details.
1. Which transaction code maintained GL, FUND and Fund center configuration?
2. In SPRO where to find the fund and fundcenter configuration details.
Please let me know
Thanks & Regards
KRISHGUNA

In SPRO go to Public Sector Management to find the configuration details for Funds Management.
Thanks and regards
Kedar

AS2 adpater-- Configuration details for both SND and RCV.

Hi All,
I need some details for both AS2 sender and receiver adapter.
Sender AS2 adapter :
1. Use Proxy
      Use Authentication
Which one we need to use?
2. what is this Proxy Realm or Authentication Realm??
3. Whether we need to enable Hostname check & HTTP keep alive? what is the purpose of these settings?
4. what is this Message subject ?? the content of this comes from the file name or file data?
5. Server certificate and private key authentication?? do we need to get these from partner system??
Receiver AS2 adapter :
1. Here also the same question when we need to use Proxy settings and when we need to use Authentication settings.
2. Dynamic attributes??
     Use dynamic attributes
     Use non-empty attributes.
What are the information we need to ask partner system to get the connection??
Please reply if anyone worked on these AS2 settings.
Thank You.
Regards
Krupakar.

hi..
Sender Adapter..
1.You can use both use proxy and use authentication.depends upon the requirement.
when you use proxy you have to give proxy server name and all parameters.That means proxy server acts like your actual server.To pass this data through the AS2 apdapter U hv to specify th following parameters.
Proxy Server : Your proxy server.
Proxy Port :The port of the proxy server.
Proxy User: User for optional authentication.
Proxy Password: Password for optional authentication.
Proxy Realm: Realm for optional authentication.
2. REALM
A realm is a part of Yanel which has its own configuration and repository. This allows you to run several subsites (which are independent of one another) in a single Yanel instance. For example, each department in your company can have its own realm. This allows one department to use its database as a content repository and another to use the filesystem to provide the content to Yanel
So proxy realm means u r authorized to use the proxy server
You use Use Authentication for -
>Used to enable/disable basic authentication.
Use Authentication Used to enable/disable basic authentication.
User: User for basic authentication.
Password: Password for basic authentication.
Realm: Realm for basic authentication.
3. if u check these options for the following purpose.
SSL Hostname Check: Validate common name with server name.
HTTP Timeout:Timeout in seconds for waiting for server
response.
4.Message Subject: This subject will be compared with the subject in the received message. This is used to find the
correct channel for the inbound message. Wildcards are allowed.Its the file data.
5. Your partne rwill provide u these details.
Receiver Adapter:
1.If u use the same in sender side then u hv to verify it again in the receiver system. Then only the communication is established.
3.u must have the AS2ID and the certificates.
THAnks
MAnas
reward points if helpful.

Configuration Profile for Apple Devices with ISE

Hi,
is there any possibility to put configuration profiles on apple device with the ise? I need to disable the dataroaming function in forgein countries for ipads.
Best regards
Felix

Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
So when I try to get them as substring i get multiple copies of same mac address.
But looks like this will work as solution to this problem.
So far I was doing it this way (And i am sure there is clearer way to do it.)
SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
            FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM v_GS_NETWORK_ADAPTER) t2
            WHERE t2.ResourceID = ResourceID
            ORDER BY t2.ResourceID, t2.MACAddress0
            FOR XML PATH ('')
        ), 2, 100) [MACAddresses]

Device details for unreachable devices on PI 2.2

I had a device fail today, got an email alarm from PI telling me. So its nice to see the tool working as it should.
I needed to fault the device out to Cisco so I needed the serial number so I looked up the device entry in PI "Inventory/Network Device" but the device name was not a hyperlink so when I click on it all I get is the tick in the tick box.
Surely PI will not stop me seeing device details from a device it has previously gathered the information for if the device becomes unreachable.
I would have expected access to this information would be most useful at a time of failure.
Am I looking in the wrong place ?, is the information still stored somewhere else ?
regards
Rich

I expect you have already have the answer to your question, so just in case anybody else comes across this.
You should still be able to access the 360 view for an unreachable device. Clicking on the IP address in the pop up should provide you with the device information gathered so far.
Regards,
Martin

Configuration details for Collaboration

Hi, we have Collaboration installed without RTC at the moment. Portal vr. info, Ptl:6.0.2.4.7., CM:6.0.2.4.3. I have reviewed and implemented the Post installation tasks found in the help content (which are very vague). There does not appear to be any detailed documentation or "How To" Guides. Is anyone aware of more detailed instructions or examples for configuring the items found in the Collaboration Content/Related Links section? Ie. parameters for "Configure Room Backend",...
<u>Default settings</u>,
external_url_port * - 50000
external_url_protocol * - http://
external_url_servername * - p77728
room_repository * - /rooms
service_user * - collaboration_service
structure_link_name * - Structure
structure_repository * - /room_structures
Any help is appreciated.
Regards,
Scott

Hi Scott,
like you said, the post installation guide in the SP2 Administration Help Guide is quite vague, but you can also use the <b>NW'04</b> Administration Guide. Maybe some parameters are not in your SP2 Patch 4 installation but the guide is more revised.
Here the link: http://help.sap.com/saphelp_nw04/helpdata/en/01/f7e626b95d8d46b8f4f7d764a726fc/content.htm
Concerning the Room Backend, change the default settings by adapting (external_url_)servername, port and protocol to the ones of your portal installation.
Hope this helps,
Robert

Configuration details for Adaptive Web Service

Hai,
I an importing adaptive webservice model but it shows the error
Exception on execution of web service with WSDL URL 'http://sapsrv02:50200/HelloBeanWS/HelloConfig?wsdl' with operation 'getHello' in interface 'HelloBeanWSVi_Document'
Please tell me the steps how to configure the logical destinations in Visual Administrator and should i want to create a DEFAULT_WS_METADATA_DEST as default meta data destination and DEFAULT_WS_EXECUTION_DEST as default execution destination and what is the URL should i give for it.
Can anyone please help me to resolve the problem.
Regards,
R.Jude Silvester.

Hi,
Refer these links,
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d076c662-8c0f-2b10-8ca4-e63c26e2e489
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/301ff0bb-74ca-2910-fa99-eae392695aad
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
Regards,
Sunaina Reddy T

Development Plan Configuration details for Talent Management

Hi Gurus,
I need to know the configuration nodes used for Development Plans in Talent management.I created the development form in Talent Assessment -->Define Forms for Talent Assessment. & assigned a scale to it.
Now when I log in with the TMS id in portal & create a development form for one of the employees, I can see certain links & fields like : Add Action (link), when i click on Add action a screen pops up & asks for Action Type & Action Status.
Firstly i need to know where does these values get fetched from.
Secondly when i click on Add Action button, ideally it should give me 2 options :1. Add actions that can be freely defined and 2. Add training,but currently it just opens a window to create a new action.So how to control the same.
Regards
Bharti

Hi,
I know this is a (very) old post but my answer might help someone anyway.
1. Actually, the dropw-down lists are filled from the table T77TMC_SCA_MAP, status is mapped with scale 8 and type is mapped is scale 9.
Customizing of this table can be reached trough transaction S_EH4_55000247.
2. The option is only shown when LSO integration is active.
Hope it helps.
Best regards,
Guillaume

Configuration details for releasing service entry sheet

Dear all
Kindly let me know the step by step procedure in configuration for releasing service entry sheet,
regards
M.Chandra mohan

Identify the characteristics that you will use for determination of release strategy. Create characteristics for each of these - ensure that the reference table name is CESSR and reference field name is the appropriate field name. If the field name is not found in CESSR you will need to use an user exit - better not to get into that for now.
Create a class (of class type 032) and assign these characteristics to the class.
Then create one Release Group and link the class to the release group.
Create Release Codes for the release group
Create release indicator
Create release strategies.
You will configure this in the golden master client. However you will need to maintain the classification in all clients using CL20N or CL24N.
Lakshman

Need Configuration File (fsisys,fsiuser and afgjob) details for running a XML in documaker 12

Hi,
          I need basic configuration details for running a simple xml in documaker 12. Details like printer,recipient configuration,etc.

Hello Sen,
You might want to set the below XML-related configuration sections besides doing the general DB Handler and Library setup that is required for Documaker 12.x version. The Printer configuration may not require changes from the flat-file extract mode. Make sure the afgjob entry ;BatchingByRecipINI;;; is in place too.
< ExtractKeyField >
SearchMask = 1,<?xml
[ RECIP_NAMES ]
ZERO=000,
FC=101,FULL COPY
< BatchingByRecip >
DefaultBatch = BATCH1
Batch_Recip_def = !//RecipientRecord[RecipientDescription="Full Copy"];"BATCH1";FC
< RUNMODE >
   NAUNLOAD = Yes
   XMLExtract = Yes
   DownLoadFAP = Yes
   ChkDstLenExceeded = No
   LoadCordFAP = No
   CheckNextRecip = No
   CompiledFAP = No
< TRN_Fields >
    SystemInd = !//TransactionRecord/TransactionKey/SystemIndicator
    TransactionNum = !//TransactionRecord/TransactionKey/TransactionNumber
    LOB = !//PolicyRecord/LOB
    Iteration = !//TransactionRecord/TransactionKey/Iteration

Interfaces for RFID

Hello Everyone
I'm new to WM and i have got couple of questions......
1. what are the interfaces availble for RFID devices to integrate in to WM module and how do we develop those interfaces as a fuctional consultant........i mean the settings we have to make.
2. how do we configure mobile data entry with SAP's direct RF solution using SAPConsole-verification profiles,RF menus, Barcode Scanning and screen management.
I would really appreciate if you send any excersises and solutions you have to my email: [email protected]
Thank you
Manik

hi,
Please forward the same to me also at [email protected] & [email protected]
Regards,
Sanjay Rahangdale
s

Save for web & devices not working (CS4)

I noticed today that I can't save for web & devices any more. when I try it shuts down the program and gives me the following message to send a crash report:
Adobe has detected that the application Adobe Illustrator CS4 has unexpectedly quit.
this started as a Photoshop CS4 problem where I also can't save for web & devices any more. before people jump down my throat again for mentioning this Photoshop problem on the Illustrator forum - this is for context only. I have the same problem in both applications. I just include this information here in case it helps. the Photoshop message I get is:
The operation can not be completed.
savign for web & devices worked totally fine up till last night in Photoshop. haven't saved anything out of Illustrator for web & devices in a while but it used to work just fine.
I have a PC and use Windows 7. All my Adobe products are up-to-date.
Any help is much appreciated. Thx a lot!

thank you very much. at least it happened before. I was seriously doubting myself. tried trashing preference files multiple times, but that didn't help. will reinstall everything and see if that does the trick.
thanks again!

Sub-contract challan output- configuration details..?

Hi gurus
Can anybody send me the configuration details for sub contracting , and sub contracting challan output screen layouts in SPRO.
Because in my company i m not getting Company details in Sub-contract challan print out in front sheet,
1 challan with 2 pages.
Thanks
sap-mm

r u using std SAP format or Devoloped format
because if ur using std format unless and untill u put company details in config u cant create 57F4 challan
if ur using developed report then contact the ABAP person
regards,
snb

I tried to update itunes to the latest version yet it wont update. Im currently getting a error message,from Window Installer, configuration dat for this product is corru

I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying

The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Error coming while installing Berkeley database for IOS Device.

Hi I want to install berkeley db in my MAC. My Xcode version is 4.5.2. I downloaded db-5.3.21(Berkeley) from oracle site.I installed command line tool for xcode. I installed berkeley db in my MAC for iPhoneSimulator. Where as for iPhone device I am unable to install. I am following below link for installing the berkeley db. http://docs.oracle.com/cd/E17076_02/html/installation/build_unix_iphone.html
When I am installing berkeley db for IOS device it is showing following error.
checking for arm-apple-darwin11.4.2-sh... no checking for sh... /bin/sh checking for a BSD-compatible install... /usr/bin/install -c checking for arm-apple-darwin11.4.2-cc... /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc checking whether the C compiler works... no configure: error: in /Users/celstra/rajaramesh/db-5.3.21/build_unix': configure: error: C compiler cannot create executables See config.log' for more details
............................... The error is telling that C compiler cannot create executables... But for iPhonesimulator it is not showing the error...
Steps performed for installing Berkeley database for IOS device.
export DEV_iOS=/Developer/Platforms/iPhoneOS.platform/Developer
export SDK_iOS=${DEV_iOS}/SDKs/iPhoneOS6.0.sdk
export COMPILER_iOS=${DEV_iOS}/usr/bin
export CC=${COMPILER_iOS}/gcc
export CXX=${COMPILER_iOS}/g++
export CFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CXXFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CFLAGS=${LDFLAGS}
export CXXFLAGS=${LDFLAGS}
//export CPP=”/usr/bin/cpp ${CPPFLAGS}”
export LD=${COMPILER_iOS}/ld
export AR=${COMPILER_iOS}/ar
export AS=${COMPILER_iOS}/as
export NM=${COMPILER_iOS}/nm
export RANLIB=${COMPILER_iOS}/ranlib
../dist/configure --host=arm-apple-darwin9\
--prefix=$SDKROOT ...
Same steps i performed for iPHONESIMULATOR. But at that time c complier works fine. But while i am try to install for IOS device it is showing above error.
Can we need any license software for this installation. Could any one please provide exact document regarding installation for IOS device.
Any advice would be appreciated.
Edited by: 1000547 on Apr 17, 2013 12:58 AM
Edited by: 1000547 on Apr 17, 2013 1:03 AM
Edited by: 1000547 on Apr 17, 2013 2:31 AM

Thanks for the reply komal i did that but not cleared..one thing when i create the build from my flash builder the error happens.but the same project i used in another flashbuilder and create build..That build works fine...is there any chance for flash builder compiler problem.
cheers,
venkat

Configuration details for RFID devices in warehouse while delivery

Similar Messages

Maybe you are looking for