Configuration docs for Validation and Subsituation

Hi,
Can you any body forward me configuration docs related to Validation and subsituation on my e-mail id :-
[email protected]
Thanx & Regards
Sandeep

Dear SAI
Pls send the documents on validation and substitution.
My email id id [email protected]
Thanks and regards
Priya

Similar Messages

Configuration docs for Asset Management

Hi.
Does anyone have configuration docs for Asset Management
thanks
Tom

Go to http://help.sap.com/ and click on SAP Best Practices. Look for Building Blocks Library under the Additional Information on the right side of the page. In the Building Block Library, look for J10- Asset Management. Click on that and thereafter, under Technical Documentation, click on configuration guide. There you should have all the information or at least some of the information you need on Asset Management.

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

Configuration steps for Quality and Batch Management.

Hi Friends,
We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
I am new to Quality and Batch Management.
Could any one guide me, how to configure material master for QM and Batch to test the material?.
Thanks

1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards,
eswarmanu...
Edited by: eswarmanu on Oct 21, 2008 7:09 PM

Configuring WCCP for http and https

How do I configure wccp on a 6509 to redirect http and https trafic to a S650. I am using the following config and http is working fine:
ip wccp version 2
ip wccp web-cache redirect-list aclwccp
interface Vlan23
description Rede Firewall
ip address 10.0.23.20 255.255.255.0
ip access-group 172 out
ip wccp web-cache redirect out
mls rp vtp-domain coc_block1
mls rp ip
mls netflow sampling
end
Should I config an other service for the https protocol?

Cecato,
The WSA can be configured to send 80 and 443 traffic, in the WCCP settings area (5.2.0+). There are some things you will need to be aware of before doing this though:
1. If you are on 5.2.0-x, you will not be able to inspect HTTPS traffic. Only version 5.5.0+ has the ability to decrypt HTTPS traffic. Because of this, it is not recommended to redirect port 443 on WSA version 5.2.
2. You will most likely need to specify a service ID other then web-cache. On most Cisco devices, web-cache is reserved for port 80 traffic only and cannot be changed. Any other service ID will work as you want it to.

Configuration doc for 1240AG web GUI

hi! I am using web GUI to configure this AP but can not locate configuration guide for web GUI.
there are plenty of them for CLI
version is 12.4(10b)JDA
Where can I find configuration guide based on web GUI?
any help is appreciated!

Release notes:
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_4_10b_JDArn.html
Here is the config guide:
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.html
That should resolve your question

C++ programming, docs for iostream, and math

where are the OSX specific docs for iostream.h, cmath, etc., pls
i have looked in the BSD site, and several Mac docs that come with the xtools package...carbon, darwin, etc...
the ones in
file:///Developer/ADC%20Reference%20Library/documentation/Carbon/Reference/Mathe maticalal_Utilities/math_logic_utils_ref/function_group_9.html#//appleref/c/func/exp
i cannot find?
Powerbook Mac OS X (10.3)
MiniMe Powerbook Mac OS X (10.2.x)

The best online reference is http://www.cppreference.com/
It doesn't have a lot of detail though. If you want a lot of detail you can consult the C++ standard. Do a search for "iso 14882". You can purchase a PDF copy of the standard for $18. There are also some draft versions available that have some better indexing. Let me know if you are interested and I can post a link to them. They are very detailed, perhaps more than you want.
The best hardcopy book I've found is Nicolai Josuttis' The C++ Standard Library. It is moderately detailed, very easy to understand, and more than $18.

Configuration doc for Report painter

Hi Friends,
Can any one send configuration document for Report painter?
[email protected]
Regards
Babu

hi
find this link
http://www.virtuosollc.com/PDF/Get_Reporter.pdf

FI&CO Configure doc for ECC 5.0

Hi Sap Guru's
Have anybody provide SAP ECC 5.0 FI&CO Configure doc
Thanks
venu

Hi Vanu,
Excatly in EEC 5,which conf document ,do u need.
Give replay i will provide .
Regars,
Naidu

Configuration Guide for 6248 and 5548 and VNX 5500

Hi,
Need help here to configure the FCoE Uplink + Ethernet Uplink in Port channel
Following is the connectivity details from 6248, 5548 and VNX5500.
I have configured Port Channel in following way on Both Fabric Interconnect
After Configuring above things I am getting following Faults on Servers
For NetApp3240 ENM source pinning failed, I have allowed VLAN ID 21 in Uplink manager then too this Link state is not showing UP and Same thing go for both FC_vHBA
Kinldy help me to configure the setup
-Amit

Below is the ouput for two commands "show run int port-channel membership" and "sh int port-channel "
===========================================================================
primary# sh run int po2 membership
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:55:31 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
primary# sh run int po3 membership
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:57:14 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
primary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4caa (bia 002a.6a0a.4caa)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 504 bits/sec, 0 packets/sec
30 seconds output rate 2256 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 656 bps, 0 pps
RX
    22208045 unicast packets 747374 multicast packets 27634234 broadcast packets
    50589653 input packets 49083144072 bytes
    21411174 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    2801196 unicast packets 353162904 multicast packets 549464 broadcast packets
    356513564 output packets 25978572978 bytes
    101325 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
35 interface resets
===========================================================================
primary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4caf (bia 002a.6a0a.4caf)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 48052/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 104 bits/sec, 0 packets/sec
30 seconds output rate 1704 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 448 bps, 0 pps; output rate 1.08 Kbps, 0 pps
RX
    9070 unicast packets 288523 multicast packets 143322 broadcast packets
    440915 input packets 72677230 bytes
    7 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 36 CRC 0 no buffer
    2161727821137838086 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    62914 unicast packets 74425404 multicast packets 14434365 broadcast packets
    88922683 output packets 7182753461 bytes
    14 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
17 interface resets
===========================================================================
secondary# sh run int po2 mem
!Command: show running-config interface port-channel2 membership
!Time: Wed Feb 25 07:56:41 2009
version 5.2(1)N1(1b)
interface port-channel2
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/8
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/9
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
interface Ethernet1/10
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 2 mode active
===========================================================================
secondary# sh run int po3 mem
!Command: show running-config interface port-channel3 membership
!Time: Wed Feb 25 07:58:30 2009
version 5.2(1)N1(1b)
interface port-channel3
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
spanning-tree port type edge
spanning-tree bpdufilter enable
interface Ethernet1/3
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/4
description ***Link to FI-A in R17***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
interface Ethernet1/5
description ***Link to FI-B in R18***
switchport mode trunk
switchport trunk allowed vlan 12-13,21,101-600
channel-group 3 mode active
===========================================================================
secondary# sh int po2
port-channel2 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6f (bia 002a.6a0a.4d6f)
Description: ***Link to FI-A in R17***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/8, Eth1/9, Eth1/10
Last clearing of "show interface" counters never
30 seconds input rate 1752 bits/sec, 0 packets/sec
30 seconds output rate 1016 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 832 bps, 0 pps; output rate 496 bps, 0 pps
RX
    76009142 unicast packets 544440 multicast packets 228999 broadcast packets
    76782581 input packets 146179423660 bytes
    68566412 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192711593 unicast packets 154928956 multicast packets 31420967 broadcast packets
    379061516 output packets 385914168860 bytes
    179761364 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
secondary# sh int po3
port-channel3 is up
Hardware: Port-Channel, address: 002a.6a0a.4d6a (bia 002a.6a0a.4d6a)
Description: ***Link to FI-B in R18***
MTU 1500 bytes, BW 30000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s
Input flow-control is off, output flow-control is off
Switchport monitor is off
EtherType is 0x8100
Members in this channel: Eth1/3, Eth1/4, Eth1/5
Last clearing of "show interface" counters never
30 seconds input rate 456 bits/sec, 0 packets/sec
30 seconds output rate 1784 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 456 bps, 0 pps; output rate 912 bps, 0 pps
RX
    75986748 unicast packets 490267 multicast packets 124569 broadcast packets
    76601584 input packets 146159548726 bytes
    68566413 jumbo packets 0 storm suppression bytes
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    192585042 unicast packets 190939131 multicast packets 13399201 broadcast packets
    396923374 output packets 386206869311 bytes
    179761514 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
24 interface resets
===========================================================================
We have removed vPC configuration as we are facing same problem as i said in my previous post
id     Port        Status Consistency Reason                     Active vlans
2      Po2         up     failed      vpc port channel           -
                                      mis-config due to vpc
                                      links in the 2 switches
                                      connected to different
                                      partners
Do let me know if anything else is required from my end
-amit

Checking for valid (and working) address

(sorry if i posted in the wrong forum... i didn't found any that suits better my problem)
that's the question: i have a string and need to check if it's a valid host name/ip address and also check if it's up and running at the moment. to solve the host name, i have the following code:
try {
URL url = new URL(sURL);
HttpURLConnection uc = (HttpURLConnection) url.openConnection() ;
uc.setRequestMethod("GET") ;
uc.connect();
uc.getResponseMessage();
catch (IOException ioe) {
//wrong url/not working
but it doesn't work with ip addresses. Someone suggested me to use InetAddress.isReachable(int), but it's only avaliable since Java 1.5, and i must use 1.4. Another way around would be to use InetAddress.get(Canonical)HostName(), but it may fail even with a valid ip address, and i can't allow that.
can someone give me a hand?
thanks!

(sorry if i posted in the wrong forum... i didn't
found any that suits better my problem)
that's the question: i have a string and need to
check if it's a valid host name/ip address and also
check if it's up and running at the moment. to solve
the host name, i have the following code:Easy - it isn't possible at all.
If and only if you were to use ICMP (which you can't in 1.4 using just java) and if and only if the target computer responded to ICMP then you could use that.
That is seldom very useful because generally one doesn't care if a computer responds to ICMP. What they need to know is if the computer is actually doing what it is supposed.
For example if you have an http server, what you care about is if it is actually handling http requests. (The computer can be up and not handling http requests.)
Not to mention of course that a host name requires that the DNS server respond to it first. And just because the DNS server is failing it doesn't mean that the target PC is failiing.
But if you really want to do nothing but ICMP then you can use Runtime.exec() and an OS specific command (usually 'ping') to do just that.

Configurations required for PME and SCE in SAP-CRM 2007

Hi Friends
How to configure the PME and SCE in SAP-CRM 2007.
If u have any documentation avilable for those two topics regading the implementation of e-Commerce application.
Waiting for ur reponse..
Regards
Satish.

Hi Mia,
Authorization group is available in the old versions and basically this help in defining new authorization groups and you can define what can be done with these authorization groups as what can be edited and what cannot be and this is done on SPRO. These authorization groups are entered in the authorization group and the user who has this authorization object will be able to work on the account.
So the business role in CRM 2007 has a PFCG role and the authorization profile that you created are assigned to the business role and users are assigned to the business role.
There are also few authorization objects to maintian the BP relationship and see if you can use these combination to check if it meets your requirement.
Hope it clarifies and if useful please reward points
Thanks
Srini

Configuration docs for Validation and Subsituation

Similar Messages

Maybe you are looking for