Configuration error 1 help?

I recently updated my Mac Pro to OS X Yosemite and now my entire CS6 Master Collection does not work. I need to work with Illustrator and every time I open it, I get an "Configuration error 1" window. It states that I need to uninstall and reinstall the product. However, when I try to uninstall the program, I get another error window that won't allow me to do so. I have already visited this Adobe help page, Configuration error 16 | CC, CS, and that did not fix anything. Am I missing something? Is there something else that I can do? I really need to resolve this issue quickly... Thanks so much for the help!

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Similar Messages

  • Help me! Adobe Media Encoder: configuration error

    Hello! I have a problem when initializing the Adobe Media Encoder, whenever I try to start it, I get the following error message:
                                                                                                                        Configuration Error
                                                  Please uninstall and reinstall the product again.
                                                  If the problem still occurs, contact Technical Support Adobe and mention the error code that appears at the bottom of the screen.
                                                  Error: 16
                                                  http://www.adobe.com/br/support
    * already uninstalled and reinstalled several times product and the problem continues! *
    Processor: Intel Pentium dual core 2.7Ghz
    RAM: 3Gb DDR2 667Mhz
    Video Card: Asus 210 Silent 1Gb GDDR3 64Bits
    Motheboard: Asus P5KPL-AM SE
    OS: Windows 8

    Which version of Media Encoder are you using?
    Please try clearing the app preferences as described below.  This may help in some cases.
    If this is CC or CC 2014 version, launch the app while holding a shift key.
    If this is CS6 or older, launch the app while holding Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS)

  • I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!

    I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!
    Install appeared to run okay up to,, and including "shared Technologies"....

    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

  • FIX CONFIGURATION ERROR 1 ON MAC? PLEASE HELP!

    I NEED HELP WITH THIS PLEASE!
    FIX CONFIGURATION ERROR 1

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • I am trying to download itunes and keep getting a configure error message...anyone...help!

    I am trting to download itunes again and it comes up with a configure error message...anyone...help!

    Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
    https://discussions.apple.com/community/itunes
    B-rock

  • CS5: Configuration Error 3 I NEED HELP SOMEONE PLZ

    I have the configuration error 3
    My system requirements are:
    Windows 7 Home Premium 64 bit
    Pentium Dual Core CPU T4200 @ 2.00GHz
    4.0 GB RAM
    Moblie Intel 4 Series Express Chipset Family
    SOMEONE HELP :c
    thnks:)

    And more specifically? When do you get the error? On install or what? If yso, do you install with sufficient user privileges? are your security settings toned down to allow such operations? Anything else we may need to know aside from this being some sort of notebook?
    Mylenium

  • After Effects Configuration Error 5 PLEASE HELP

    Hello,
    I am on a Mac with 10:9 Mavericks intalled and I cannot get After Effects CC to run without this Configuration Error 5.  It happpened on Mountain Lion too.  I have spent over 30 hours on the phone with tech support, uninstalling and reinstalling, using the cleaner, setting permissions, running commands in terminal, installing from the root directory and new admins and everything I could find on this forum that would help me.  I can't afford to have this happen any longer, my job is on the line. Please does anyone have any advice to get this to work. Thank you.

    I'm not sure if this is your issue, but the Maverick's update changed Adobe preferences folder settings on some systems. Check and set this folder's permissions to read/write for it and all its sub-folders.
    http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
    http://forums.adobe.com/thread/628476

  • Configuration error 5 - mid 2011 imac 27" - i had some genius comment on this, "uninstall, clean, reinstall.  lets assume i dont know wtf "clean means.  please give more help than some bs remark. cheers

    Earlier today I asked for help with a configuration problem error 5 prompt i keep getting when trying to open after effects
    i got a lazy response saying "uninstall, clean, reinstall." Well,  lets assume i dont know wtf i need to "clean"...
    more info please or a way to actually speak to a person and not deal with problems this BS way...
    i uninstall and then reinstall Ae just to get the same prompt about configuration error 5.  What do i need to "clean" in order for this shite to work.
    all the best
    jh

    thank you so much for the help.  after an online chat with support it seems
    that my graphics card is not on the approved list.  When i go to see if
    getting a new mac pro would help, i dont see that they have any of the
    approved graphic cards available to put in the mac pro.  will their gpu
    cards work with after effects?
    jh
    On Sun, Jun 8, 2014 at 7:52 AM, Rick Gerard <[email protected]>

  • I am receiving configuration error 16 when attempting to start any ot the CS6 trail apps. Help?

    I am about halfway through my trail period using Creative Suite 6 on my new MacBook Pro using Mountain Lion 10.8.3 (the newest version). I keep recieving the "Configuration Error 16" message. What should I do to finish the remainder of my trial period?
    With kind regards,
    Vincent J. Flotta

    http://forums.adobe.com/message/4830552

  • Please help. Photoshop CS6 configuration error 1. What to do? Can't reinstall because then removed all the plugins, brushes, textures, etc.

    Помогите, пожалуйста.
    Photoshop CS6 configuration error 1. Что делать? Не могу переустановить, т.к после этого удалятся все плагины, кисти, текстуры и т.д..

    You need to reinstall. There is no way around it.
    Mylenium

  • FIX CONFIGURATION ERROR 1 ON A MAC? PLEASE HELP

    FIX CONFIGURATION ERROR ON A MAC.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • SIM - ./configure error. Can you please help?

    I've downloaded the latest SIM snapshot. When running ./configure, I get the following:
    checking for Qt... configure: error: Qt (>= Qt 3.2) (library qt-mt) not found. Please check your installation!
    For more details about this problem, look at the end of config.log.
    make: *** No targets specified and no makefile found.  Stop.
    I'm trying to configure it using the following:
    ./configure --prefix=/opt/kde --with-qt-dir=/opt/qt --with-qt-includes=/opt/qt/include --with-qt-libraries=/
    opt/qt/lib --disable-debug
    Can you please tell me what I'm doing wrong?
    Thanks in advance.

    i have the same problem.
    Any pacage i try to compile fail with this:
    checking for Qt... configure: error: Qt (>= Qt 3.1.0) (library qt-mt) not found. Please check your installation!

  • Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0

    Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
    When I run the App-V package, I get the License Configuration Error 213:19
    Thank You. very much for your time.   Karl

    You will probably get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Configuration error when open admin tool in BIEE 11g client

    Hi All,
    I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
    <action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
    - <AdditionalNotes>
    <error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
    </AdditionalNotes>
    After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
    And when I try to import metadata,it also shows connection has failed.
    Can any body give some helps on this,thanks a lot.
    Ryan.
    Edited by: 997662 on Apr 5, 2013 1:39 AM

    Hi,
    Let me know which version you are using (OBIEE) ?
    you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
    Thx,

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    Logon failure: unknown user name or bad password 
    am using Windows integrated security,version of my sql server 2008R2
    I have go throgh the different articuls, they have given different answers,
    So any one give me the  exact soluction for this problem,
    Using service account then i will get the soluction or what?
    pls help me out it is urgent based.
    Regards
    Thanks!

    Hi Ychinnari,
    I have tested on my local environment and can reproduce the issue, as
    Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
    Please also find more details information about when to use the execution account, if possible,please also not specify this account:
    This account is used under special circumstances when other sources of credentials are not available:
    When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
    When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
    Execution Account (SSRS Native Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

Maybe you are looking for