Configuration Error: No CM system assigned to this task.
Hi,
I get the error "Configuration Error: No CM system assigned to this task." when I try to run a crawler for a newly created index.
This TREX instance is shared by other portal environments too but the other portal environments behave fine.
Any ideas?
Best Regards,
Kumar
Following is the fix:
CM Systems had to be added to the Scheduler tasks.
Ref:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/4be37ce885d048a2a04709018f6bf1/frameset.htm
Also, this environment had two server instances. The nameserver configuration should be on the global level so that the changes take effect on both servers.
Regards,
Kumar
Similar Messages
-
Configuration error description: The system cannot find the path specified
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2012-10-26 00:24:37
End time: 2012-10-26 00:32:07
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xF57C3D6F%400xFB92A9BB
Machine Properties:
Machine name: TEST-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQL MSSQL10.SQL
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 SQL MSSQL10.SQL
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSAS10.SQL
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 SQL MSRS10.SQL
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Database Engine Services 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
SQL Server Replication 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008 TEST MSSQL10.TEST
Full-Text Search 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSAS10.TEST
Analysis Services 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008 TEST MSRS10.TEST
Reporting Services 1033
10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Database Engine Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER SQL Server Replication
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSSQL10.SQLSERVER Full-Text Search
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSAS10.SQLSERVER Analysis Services
1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008 SQLSERVER MSRS10.SQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008
Management Tools - Basic 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Management Tools - Complete 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Enterprise Evaluation Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Enterprise Evaluation Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Enterprise Evaluation
Edition 10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\instal_sw\SQL Server 2008\SQL Server 2008\x64\setup\
Installation edition: EVAL
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,BOL,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: sqlserver2008
INSTANCENAME: SQLSERVER2008
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\instal_sw\SQL Server 2008\SQL Server 2008\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Test-PC\Test
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the path specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\Detail.txt
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20121026_002259\SystemConfigurationCheck_Report.htmHi Maggie,
Even i am facing the same problem while installing sql server 2008 R2 on windows server 2012 R2
The required error message is provided below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-11-24 06:23:13
End time: 2014-11-24 06:47:19
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xCEC86A55%400xFB92A9BB
Machine Properties:
Machine name: M2MBUILDTEST01
Machine processor count: 2
OS version: Windows Server 2008
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\SQL Server 2008\Developer RTM\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: swg\gverma
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: swg\gverma
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: SWG\gverma
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\SQL Server 2008\Developer RTM\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: SWG\gverma
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: swg\gverma
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SWG\gverma
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xFB92A9BB
Configuration error description: The system cannot find the file specified
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141124_061929\SystemConfigurationCheck_Report.htm -
I cannot log into the itunes store. Everytime that I have tried to log in and error message appears and says it cannot perform this task...and when I try to go into the music section of the application it says its not availble in the U.S as this time? Is there any one else having the similar problem?
If you can't send an SMS message, iMessage will NOT be able to activate. It uses SMS to activate it and tie it to your phone number. Contact your carrier about the SMS problem.
-
CHARM Configuration Error - No Consolidation System
Hi
Im facing following errors in solution manager's CHARM.
No consolidation system found for SSD-150 (project ZCHARM_GIL)
No track for project ZCHARM_GIL with log. system SSD/150
i have more queries.
1.solar_project_admin > system Landscape> systems i have following config
Logical Component : SAP SOLUTION MANAGER
Product: SAP SOLUTION MANAGER [Solution Manager ABAP Stack]
Product Version : SAP SOLUTION MANAGER 7.0
DEvelopment SYstem : SSD: 150 ( SSD is my solution manager SID)
QAS : Blank
PRD : Blank
Do i need to maintain values GSD , GSQ , GSP (satelite system DEV, PRD, GSP)
2. in my satelite system DOMAIN_GSD transport route
System GSD - GSQ Transport Group - System GSQ
/GSQTRG
System GSD : Transport Stratergy - Mass Transport Checked
Transport Layer - ZGSD
target group: /GSQTRGRP/ GSQ 200
GSQ 300
System GSD : Transport Stratergy - Mass Transport Checked
Transport Layer - NONE
Transport Route : GSD - ZGSD/SAP - /GSQTRG - 300/200- GSQ
Can i configure charm with above scenarion where transport groups have been definedHi
This error occurs if you dont define the client dependent tms route in satellite system.
First visit this blog
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
then in spro change request management general settings....visit the img help for TMS settings of
further
TMS
TMS Setup
http://help.sap.com/saphelp_nw04/helpdata/en/14/c795388d62e450e10000009b38f889/frameset.htm
more help
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
Regards
Prakhar -
Error message "Solution not assigned to this user"
After creating the data source, I'm trying to create a report in SDK sandbox solution.
As I'm not a keyuser, it is going to the ByD center and asking for user id / password.
I even tried to assign WoC View also to a user.
When I tried with different user ids given to me by SAP, I'm getting the same error.
Let me know the steps to assign a solution in ByD center for report creation from ByD SDK
- Ravi ,Hi Ravi,
as I already told Lynn, this will only be possible in a global solution.
The reason is the following:
You can create yourself multiple sandbox solution. So if you now to multiple changes with key user tools in the frontend for different sandbox solutions, in the end you won't know which change was made for which sandbox solution as these changes won't appear in your list of solution entitities in the ByDesign studio.
Therefore: Changes with the key user tools can only be made for the global solution. -
Error in source system in BI 7.0...
Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken -
Releasing Mass Change Worklist-Error Message No Administrator for this task
Using transaction AR01 we create a Worklist and assign it to the Substitution Rule. When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message. "No Administrator for this task". We've tried a user id with SAPALL and still get this error message.
Does anyone know what this means and how we can get around this message?We have this working in our Test system without having to set up any workflow tasks for Fixed Assets. I'm wondering if this has to do with the Productive client settings. We had to make some changes so that we could use transaction OA02 in a Productive client.
Any suggestions would be greatly appreciated. -
CS5: Configuration Error 3 I NEED HELP SOMEONE PLZ
I have the configuration error 3
My system requirements are:
Windows 7 Home Premium 64 bit
Pentium Dual Core CPU T4200 @ 2.00GHz
4.0 GB RAM
Moblie Intel 4 Series Express Chipset Family
SOMEONE HELP :c
thnks:)And more specifically? When do you get the error? On install or what? If yso, do you install with sufficient user privileges? are your security settings toned down to allow such operations? Anything else we may need to know aside from this being some sort of notebook?
Mylenium -
Configuration Error:1 Adobe Flash Builder 4.7
Hello,
I'm using Adobe Flash Builder 4.7(64 Bit). Instalation went well and Flash Builder worked just fine, but after restarting my computer and opening Flash builder again - popup appeared with Configuration Error: 1. I thought that this was one time only, so I uninstalled and reinstalled the product. But this Error is still appearing. So now I'm uninstalling and reinstalling my product every time this happens - sometimes it works, sometimes not. How can I solve this problem?
Thank you in advance!I have the same problem: any suggestion?
Thanks.
Davide. -
Windows has detected a registry/configuration error
I haven't used my Protege 3110CT in many years. When I start to boot up I get the message:
Warning: Windows has detected a registry/configuration error. Use SCANREG to correct this error.
However, I cannot get into DOS to do a SCANREG nor do I know any other method.
I do not have any of the startup disks.
My machine has Windows ME on it.
I do have an external floppy drive and CD drive.
Any assistance is appreciated.
BobPortege 3110CT
You can download a bootable DOS floppy here.
http://www.bootdisk.com/bootdisk.htm
If you can locate a download of Scanreg.exe, then boot to DOS and run scanreg /restore to
go back to a previous known working copy of your Windows Me registry.
Maybe this one works (I don't know).
http://www.mesich.com/download/SCANREG.EXE
-Jerry -
Configuration error -- airport admin utility
I'm stuck and hoping someone here might be able to help me. I have a new AirPort Extreme 802.11n and when I open the airport admin utility, a "Configuration Error" message appears telling me that "This version of Airport Admin Utility does not support this base station..."
What's worse is that there is only a "Continue" button, and it does not work (i.e. does not do anything, including dismiss the message box).
I installed the software that came with the router, but I get this error on both my MBP and my iMac.
I've tried selecting the check box that says "No longer warn me for this base station", but I am still unable to dismiss this message. The fact that this message won't go away means I can't access the panel behind it to actually configure the router. The message is not modal but also not draggable, so although I can access some fields, I can't access the fields directly underneath the message.
This is so frustrating -- please help!Hi James,
The installation disk that came with your AE installed two programs to your Utilities folder. One is Airport Utility. The other is Airport Disk Utility.
The Airport Administration Utility was already on your machine, and that only works with previous Airports. Go back again and click to open Airport Utility and you should be fine. -
Error: Excel cannot complete this task with available resources
Hello -
I am encountering an error when refreshing an EvDRE report in SAP. The error message is:
Excel cannot complete this task with available resources. Choose less data or close other applications.
Other Info:
We are running Office 2007.
We have several modified EvDRE reports stored on our network (roughly 250 reports). I say modified because we use EvDRE to build the basic structure of the report, but then we modify it to suit our needs, but in the end, they are all EvDRE files.
File sizes range from 100 KB to 700 KB.
We have no other applications running while refreshing these reports (just Excel and SAP).
Has anyone encountered this error before?
Regards,
Carlo TomAfter some trial and error, we discovered what the problem was.
It turns out, our Excel files were bigger than the actual data range.
Excel Lesson: on a spreadsheet, if you do Ctrl + End, your cursor should move to the last cell that contains data.
When we did a Ctrl + End on these files, we realized that the cursor was stopping in the far corner of the sheet u2013 completely outside the data range. So, when the refresh was called, it was trying to refresh basically the entire spreadsheet (vs. just the data range u2013 hence not enough resources).
So, to fix this, we deleted the extra rows and columns in the sheet and then ran the refresh routine again and now our files are working.
So, if you encounter this type of error, check to make sure that the u2018endu2019 of your spreadsheet is truly the end.
I hope this helps.
Carlo -
How can I perform a bulk assignment to one Task
Hi All,
I would like to allow all resources to assign some of their time to a cProjects Task (XXXX Implementation plan). How can I perform a bulk assignment to this task, instead of performing individual assignments?
Please help.
Thanks,
SriniNot quite sure I fully understand your question. When you go to the "roles" tab of a task you are allowed to assign multiple resources to a task either from the same role or different roles. The total work or effort for the task can be distributed accross the multiple assignments.
-
I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
HELP!!!
I am trying to install iTunes on my Windows 7 laptop and get this error:
"The installer encountered errors before iTunes could be configured Errors occurred during installation. Your system has not been modified"
Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no availOk people, I think I have found the solution !
If you click on the start button from your desktop screen.
Then in the "search programs and files" field type : apple software update - you can find the apple installer.
Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
I then restarted my computer and it seems to be working now !
Good luck everyone !
Maybe you are looking for
-
SCEP : SETTING WARNING LEVEL IN POLICY
is there any setting in scep 2012 antimalware policy to limit the warnings? (a setting like don't show information message when you detect a virus, take the action in the backround but don't show it to the end-user)
-
JSP Session populated with class not working after redirect
Hi, I create a session (code sample 1 below) on my index.jsp page. Index.jsp has a form on it, and a button that points back to index.jsp. The page is dynamically generated. The session is created fine, and persists properly between pages. However, o
-
Mozialle only starts in protected Mode
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1014665 /questions/1014665]'' after fill up this sign, I will transmit you detailes infos, because the error log are on the other machine
-
Post Author: xcosyx CA Forum: Crystal Reports Hello I have a problem with duplex printing. Please help. I have a table with dates of peopleI try to make a report with tickets for this customersI have a detail band with this tickets ( 3 on 1 page
-
Just installed an Epson Artisan 710 All-in-One and have it working wireless, only problem so far is printing from IPhoto 9. It is a "no-go". Keep getting error message and program shuts down. Any ideas?