Configuration EWA in clien with two solution manager

Hello
I have a question I am activating EWA ¡on SOlman but I have two solman fo the same company, el first is for management r3 system and second is for management xrpm,bw,portal system.
The EWA is running in the first solman, and the saprouter I think is here too. So I want to activate the EWA in the second solman in the guide I have this note 33135 an this talks about connetion with SAP.
Is possible that the EWA in two solman for the same client.
Addionaly the Should the rscctool report run in the satellites systems too?
Thanks
DS

Hello Danny,
There should be no conflicts providing you keep a few things in mind.
On the Satellite, in SDCCN > Setting> Task>Specific> RFC Destination
Please make sure that you define one Solution Manager system as the Master. This will be the Solution Manger system that will schedule an SDCCN EarlyWatch Allert task automatically on the Satellite, throught the Maintenance Package, so it needs tol be the one specificed in the Mainatence Package task. In other words you set up the recommended EWA Activation as documented at http://service.sap.com/ewa for one Solution Manager system.
Then for additional Solutioin Manager systems you would create an SDCCN Task in the same way you would generate an ad hoc EWA report, only you would choose the RFC Destination for the second ( and/or subsequent) Solution Manager systems, and you would specify it as a periodic task so it would reschedule itself each week, so to affect automation of the sending of the SDNNC session data to the other Solution Manager Systems.
This way you will not have conflicts between the solution manager systems.
Regards,
Paul

Similar Messages

Syncronizing two Solutions Manager with One SLD

Hello Experts, we have this issue: I am having one Central SLD in PI and one productive Solution Manager (new one) that is pointing to that SLD, for incidents we are managing another ¨productive¨Solution Manager (old one) . There is a new system that I need it in my SMSY in my old Solution Manager and the best way to do it would be to point that old Solman to the same SLD that the new one is pointing. my question is: I only have to set the SLD in the old solution manager in the RZ70 and add that Solution Manager in the Central SLD?, so I would end with two solution manager pointing the same Central SLD, it doesnt mess with my new productive Solution Manager SMSY?, I want to be sure that some trash data in the old Solution Manager wont be present in the new Solman that is pointing the Central SLD right now.
Best Regards,
Paul

Dear Mr. Paul,
There are few things to understand:
1. RZ70 is used to feed SLD with system information.
2. landscape fetch job need to be scheduled within Solution manager system to update SMSY with the latest information available in SLD which you have configured during SOLMAN_SETUP.
Here with your description it is clear that you have central SLD at your PI system and your both Solution manager system ( New and Old) are connected to the central SLD.
Here what I understand if you want to add a new system say X in SMSY of your old solution manager.
In order to do so you need to configure your new system to the central SLD using RZ70. Once you did this, system details of your new system would be available with central SLD.
Now in next step to make that system available to your old solution manager, you need to rerun the smsy_setup job. This will referesh your SMSY and new system would be available in SMSY of your OLD solution manager.
In this case there is a catch. Since you have added the system to the central SLD, the new system X would also appears in the SMSY of your new Solution Manager as well once SMSY of new solman gets refreshed.
So if you just want to add this new system X to SMSY of your old solution manager only and not to the new one, you can add this system to the local SLD of old solution manager only not to the central SLD.
Also you need not to worry about the trash data available in your Old solution manager. It would not effect the central SLD if your local SLD of old solution manager is not synch with central SLD.
Regards,
Sachin

Configuration Guide Job Scheduling Management with SAP Solution Manager

Dear Gurus
Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
Best Regards

Hello Luis,
the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
1. Activate Solution Manager Services
2. Set Up Work Center for Job Scheduling Management
Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
The following SAP notes might be usefuly as well:
1054005 - FAQ on Job Scheduling Management
1117355 - Work Center roles
Kind regards,
Martin
http://service.sap.com/jsm

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Configure EP to display contents from Solution Manager

Hello,
How to Configure EP to display contents from Solution Manager? I want to access Solution Monitoring through Portal, how to do this?
I will appreciate if someone can help me,
Waiting for reply,
Regards
Sharmishtha

Hello Lee
I want to display solution monitoring on portal. I will access the portal instead of solution manager to view CCMS alerts.
I have configured ccms in solution manager which is my central system, so now i want to display these contents on portal.
is there any way i can do this task. I have solman 4.0 with SP15. I use work center for this configuration.
Will appreciate if you can direct me the right way.
Thank you
Regards
Sharmishtha

Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Configuration documents of CRM 2007 in Solution Manager

Hi all,
I have new version of CRM 2007 in our landscape and Solution manager as well.
So we need to get/download configuration documents of CRM 2007 by Solution manager but not sure what configuration we need to do in Solution manager to get these CRM documents.
So kindly suggest me the way to get this done, thanks.
Regards,
Himanshu chauhan.

Hi,
This link might not be sufficient but will let you know how powerful Solution Manager is.
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-17873d3e79f60eb30-int/0/articleContainer-214343d5145200a438
This link will be useful to you providing you how to create non SAP systems in your Solution Manager Landscape.
http://help.sap.com/saphelp_sm40/helpdata/en/bc/0e90000e58f64fb184a4cba0323e39/content.htm
This is one good guide for you.
www.sappro.com/downloads/NonSAPsystems.pdf
Meanwhile i will try for more indepth coverage of the subject.
Feel free to revert back.
--Ragu

Earlywatch On 4.6B with No Solution Manager

Hi all,
We are running a 4.6B with no solution manager installed. Is there any possible way to do the early watch without Solution manager?

Sorry,
But you have to do your own part of the work or you will never learn anything.
Don't ask to be spoon fed.
Use the SAP standard menu, experiment and you will find all the needed transactions by yourself...
Regards,
Olivier

ASA 5510 context base configuration in HA Mode with two different subnet

Hi
Please someone help me to configure the Firewall ASA 5510 in context based configuration in HA Mode with two different subnet....
IP Details are below.....:
interface Ethernet0/0
nameif outside
security-level 0
ip address 10.10.10.2 255.255.255.0 standby 10.10.10.3
interface Ethernet0/1
no nameif
security-level 0
no ip address
interface Ethernet0/1.101
description INSIDE1
vlan 101
nameif INSIDE1
security-level 90
ip address 172.22.0.2 255.255.255.0 standby 172.22.0.3
interface Ethernet0/1.102
description INSIDE2
vlan 102
nameif INSIDE2
security-level 80
ip address 172.22.1.2 255.255.255.0 standby 172.22.1.3
interface Ethernet0/3
description LAN Failover Interface
failover
failover lan unit primary
failover lan interface FAILOVER Ethernet0/3
failover replication http
failover interface ip FAILOVER 192.168.3.1 255.255.255.0 standby 192.168.3.2
route outside 0.0.0.0 0.0.0.0 10.10.10.1 1

Hi Sanjeev,
If it is a context based configuration that you are doing then, you would need to configure context on the ASA first, you can refer to this document for it:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml
Thanks,
Varun Rao
Security Team,
Cisco TAC

Integrate two Solution Manager to the one

Hello!
I have the following question:
We use at the moment one Solution Manager with the functionality MOPZ and Service Desk. We use the other one Solution Manager mainly for the RZ-Systemmonitoring.
<b>We are about to think, whether it is possible to integrate the both Solution Manager to the new one.</b>
<b>Can some one give a short feedback with advantages/disadvantages and risks.</b>
Thank you very much
regards
Thom

you can do that of course but there is no automatism do do that. You will need to do either configuration of MOPZ again - or re-setup your system to use a different system as CEN.
Markus

Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1

Dear Forum members,
I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards).
Please post your feedback, current status wrt to setup, commmon issues in this area.
I will be more than glad to help you here.
Regards, Raghav
Development Manager
CLM - Solution manager team, Labs India.

Hello Raghev,
we implemented unfied job monitoring on a larger scale by now, starting out with the monitoring of SAP Standard & Reorg Jobs.
Everything seemed quiet OK at the beginning, but over time display performance of the Monitoring UI decreased drastically (exceeding 5 Min. "per click" in the UI).
I pinned this down to the following (Oracle) SQL access:
SELECT
"CLIENT", "CONTEXT_ID", "TYPE_ID", "HASH_METRIC_PATH", "START_TIMESTAMP", "IS_CURRENT", "END_TIMESTAMP",
"METRIC_PATH", "RATING_AGGREGATE", "VALUE_MIN", "VALUE_MAX", "VALUE_SUM", "VALUE_COUNT", "VALUE_LAST",
"VALUE_DATA_TYPE", "VALUE_MAX_TIME", "LAST_TEXT"
FROM
"MES_DB_AGGREGATE"
WHERE
"CLIENT"=:A0 AND "CONTEXT_ID"=:A1 AND "TYPE_ID"=:A2 AND "IS_CURRENT"=:A3 OR "CLIENT"=:A4 AND
"CONTEXT_ID"=:A5 AND "TYPE_ID"=:A6 AND "IS_CURRENT"=:A7 OR "CLIENT"=:A8 AND "CONTEXT_ID"=:A9 AND
"TYPE_ID"=:A10 AND "IS_CURRENT"=:A11 OR "CLIENT"=:A12 AND "CONTEXT_ID"=:A13 AND "TYPE_ID"=:A14 AND
"IS_CURRENT"=:A15 OR "CLIENT"=:A16 AND "CONTEXT_ID"=:A17 AND "TYPE_ID"=:A18 AND "IS_CURRENT"=:A19
The execution plan used for this SQL is:
0
SELECT STATEMENT
1
INLIST ITERATOR
2
TABLE ACCESS BY INDEX ROWID MES_DB_AGGREGATE
3
INDEX RANGE SCAN MES_DB_AGGREGATECU
MES_DB_AGGREGATE in our case has over 5 million entries.
The parameterization of the DB incl. Memory and all should be OK.
The index range scan simply takes that long.
This might be, because the MES_DB_AGGREGATECU index has the lowest cardinality column (CLIENT) first.
Header 1
Header 2
COLUMN_NAME
NUM_DISTINCT
CLIENT
1
CONTEXT_ID
433
TYPE_ID
2192
IS_CURRENT
2
Could you have your team check on this, because with the situation as is, the Job Monitoring application seemingly becomes non-usable, as soon, as you start to scale up.
Best Regards,
Thorsten

Can I configure a 79xx Phone with two busy trigger using UCCE 8.5?

Hi, my name is Eric and I've some doubts to configure my Phones. First of all, I will explain my environment below:
- UCCE 8.5
- CM 8.5
- CVP 8.0
I would like to know if it's supported if I configure a 79xx Phone with 2 busy triggers configuration, because the customer would like to the agent's phone receive two calls per line.
Thank you very much.

Eric,
No, this is not supported and stated as such in cisco docs.
Customer will need to designate separate DN for ACD calls and separate DN for DID/personal calls.
HTH,
Chris

Configuring one LDAP domain with two OU (one RO, another RW)

Hi Team,
My client is implementing NW 7.0 Enterprise Portal on SP14, AIX 5.3 & Oracle 10.2.0.4.
We're using MS-ADS LDAP as an UME data source. The client wishes to configure UME for one single ADS LDAP (domain) with two OU (NOT domains) such that:
    1. One OU has read only access
    2. Second OU has read/write access
Following is an illustration of the LDAP tree structure:
CORP_DOM
-- INT_USERS    (CN=IntUsers, DC=CORP_DOM, DC=NET) - read-only
-- INT_GROUPS (CN=IntUsers, DC=CORP_DOM, DC=NET) - read-only
-- EXT_USERS    (CN=ExtUsers, DC=CORP_DOM, DC=NET) - read/write
-- EXT_GROUPS (CN=ExtGrp, DC=CORP_DOM, DC=NET) - read/write
   |-- SAccounts
   |--
   |--
Note the single LDAP domain, multiple user and group paths with different access privileges.
Based on what I've read so far, this does not seem feasible as the datasource configuration file has to have unique datasource id and the private section allows only one tag for user path and group path.
I checked OSS, SDN but could only find information on configuring multiple domain/LDAP and not one LDAP domain but two OU/CN.
Kindly let me know if anyone has come across or done such a configuration.
Thanks.

Hi GLM,
You are right, access permissions to the OU are given to the service account used to access the directory from the portal.
The issue I have is not about granting permissions - its more about whether it is possible at all to configure UME for one single ADS LDAP (domain) containing two OU (NOT domains). I'd need to access the directory with two different service users having differen access privileges.
I don't see how it can be done, since the datasource id in the portal datasource configuration file has to be same as the domain and the private section allows only one tag for user path and group path.
Thanks.

Error with install Solution manager on step: check DDIC password.

Iu2019m installing SAP Solution Manager 7.0. ABAP and JAVA instance. OC SLES 10.2. БД Oracle 10.2, update 10.2.0.4. At step 28 out error:
Test logon to SAP System UST failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
Error of sapinst_dev.6.log
WARNING[E] 2010-07-01 11:30:00.166 [iaxxrfcimp.cpp:433]
           CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:434]
           CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:436]
           CAbRfcImpl::openRfcConn
DB-Error -          0
Error of /usr/sap/UST/DVEBMGS03/work/dev_rfc.trc
u2026.
ERROR file opened at 20100701 124301 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
I have tried to change password DDIC at 19920706. Error could not be fixed. In the SAP GUI can connect SAP *. When Iu2019m trying to connect DDIC out DB-Error u2013 0.

suse102:/usr/sap/UST/DVEBMGS03/work # cat dev_rfc.trc
ERROR file opened at 20060102 052456 YEKT, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Mon Jan 2 05:24:56 2006
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     2
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Mon Jan 2 05:24:56 2006
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     4
ERROR file opened at 20100706 142541 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION    CPIC (TCP/IP) on local host
ERROR       service '/tmp/.sapstream40300' in use
TIME        Tue Jul 6 14:25:41 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -4
MODULE      nixxi.cpp
LINE        3148
DETAIL      NiIBindSocket: could not delete file '/tmp/.sapstream40300'
            for hdl 2
SYSTEM CALL unlink
ERRNO       1
ERRNO TEXT Operation not permitted
COUNTER     4
T:1115703616 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner '10.10.8.240:3303' not reached
TIME        Tue Jul 6 14:25:41 2010
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     6

Integrate nagios with sap solution manager technical monitoring

Hello,
We are using nagios to gather the alert from the CCMS of the solution manager 7.1.
Recently we start using the Sybase ASE DB 15.6 and 16 on SAP solution manager and Business suite. As the CCMS is not provided to monitor Sybaseand the only way to check sybase info is through the dbacockpit and the technical monitoring I would like to know if a concection is possible between nagios and the system monitoring in Solution manager so we can gather the needed monitoring informations.
Best regards,
Hassan khanafer

Hi,
As far as I know there is no standard way of doing this at the moment.
Take a look at using the non-SAP monitoring using OS Scripts as described
below:
http://wiki.scn.sap.com/wiki/download/attachments/355894795/Non-SAP%20Monitoring%20using%20OS%20Scripts.pdf?api=v2
Kind regards,
Roland

Configuration EWA in clien with two solution manager

Similar Messages

Maybe you are looking for